From 95259e28ef047923258434898113d70c8e544eab Mon Sep 17 00:00:00 2001 From: Francis Rowe Date: Fri, 06 Nov 2015 17:43:29 -0500 Subject: convert documentation to texinfo --- (limited to 'docs/hardware/t60_heatsink.html') diff --git a/docs/hardware/t60_heatsink.html b/docs/hardware/t60_heatsink.html deleted file mode 100644 index db18a68..0000000 --- a/docs/hardware/t60_heatsink.html +++ /dev/null @@ -1,171 +0,0 @@ - - - - - - - - - Changing the heatsink or CPU on a ThinkPad T60 - - - - -
-

Changing heatsink (or CPU) on the ThinkPad T60

-

- Using this guide you can also change/upgrade the CPU. -

-

Back to previous index

-
- -
-

Hardware requirements

- -
- -
-

Software requirements

- -
- -
- -

Disassembly

- -

- Remove those screws and remove the HDD:
- -

- -

- Lift off the palm rest:
- -

- -

- Lift up the keyboard, pull it back a bit, flip it over like that and then disconnect it from the board:
- -

- -

- Gently wedge both sides loose:
- -

- -

- Remove that cable from the position:
- -

- -

- Remove the bezel (sorry forgot to take pics). -

- -

- On the CPU (and there is another chip south-east to it, sorry forgot to take pic) - clean off the old thermal paste (with the alcohol) and apply new (Artic Silver 5 is good, others are good too) - you should also clean the heatsink the same way
- -

- -

- This is also an opportunity to change the CPU to another one. For example if you had a Core Duo T2400, you can upgrade it to a better processor - (higher speed, 64-bit support). A Core 2 Duo T7600 was installed here. -

- -

- Attach the heatsink and install the screws (also, make sure to install the AC jack as highlighted):
- -

- -

- Reinstall that upper bezel:
- -

- -

- Do that:
- -

- -

- Attach keyboard:
- -

- -

- Place keyboard and (sorry, forgot to take pics) reinstall the palmrest and insert screws on the underside:
- -

- -

- It lives!
- -

- -

- Always stress test ('stress -c 2' and xsensors. below 90C is ok) when replacing cpu paste/heatsink:
- -

- -
- -
- -

- Copyright © 2014, 2015 Francis Rowe <info@gluglug.org.uk>
- Permission is granted to copy, distribute and/or modify this document - under the terms of the GNU Free Documentation License, Version 1.3 - or any later version published by the Free Software Foundation; - with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. - A copy of the license can be found at ../gfdl-1.3.txt -

- -

- Updated versions of the license (when available) can be found at - https://www.gnu.org/licenses/licenses.html -

- -

- UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE - EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS - AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF - ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, - IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, - WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR - PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, - ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT - KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT - ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU. -

-

- TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE - TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, - NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, - INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, - COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR - USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN - ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR - DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR - IN PART, THIS LIMITATION MAY NOT APPLY TO YOU. -

-

- The disclaimer of warranties and limitation of liability provided - above shall be interpreted in a manner that, to the extent - possible, most closely approximates an absolute disclaimer and - waiver of all liability. -

- -
- - - -- cgit v0.9.1