From 1362882116bb475a44fc0df0b060b74d546b1bc7 Mon Sep 17 00:00:00 2001
From: Francis Rowe <info@gluglug.org.uk>
Date: Thu, 26 Feb 2015 21:03:41 -0500
Subject: docs/install/bbb_setup.html: It's PS_ON#, not PS_ON

---
diff --git a/docs/install/bbb_setup.html b/docs/install/bbb_setup.html
index e691c7d..94f5750 100644
--- a/docs/install/bbb_setup.html
+++ b/docs/install/bbb_setup.html
@@ -78,14 +78,14 @@
 			</p>
 			<p>
 				On 20-pin ATX PSUs, you can use pin 1 or 2 (orange) for 3.3V, and any of the ground/earth sources (black cables).
-				Short PS_ON / Power on (green) to a ground (black. there is one right next to it) using a wire/paperclip/jumper then
+				Short PS_ON# / Power on (green) to a ground (black. there is one right next to it) using a wire/paperclip/jumper then
 				power on the PSU.
 			</p>
 			<p>
 				On newer 24-pin ATX PSUs, there is an additional 3.3V (orange) on pin 12.
 			</p>
 			<p>
-				You only need one 3.3V supply and one ground for the flash chip, after grounding PS_ON to ground.
+				You only need one 3.3V supply and one ground for the flash chip, after grounding PS_ON# to ground.
 				Multiple 3.3V supplies means that you could theoretically power multiple flash chips at once with the
 				same PSU.
 			</p>
--
cgit v0.9.1