diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/libreboot.texi | 18 |
1 files changed, 18 insertions, 0 deletions
diff --git a/docs/libreboot.texi b/docs/libreboot.texi index cfe9b36..6c0621a 100644 --- a/docs/libreboot.texi +++ b/docs/libreboot.texi @@ -2553,6 +2553,7 @@ Installing Libreboot internally requires sufficient privileges on the system ins * Gaining root privileges on ChromeOS:: * Preparing the device for the installation:: * Installing Libreboot to the SPI flash:: +* Warning with Disabling Developer Mode:: @end menu @node Gaining root privileges on ChromeOS @@ -2620,6 +2621,8 @@ The SPI flash has to be read first:@* # @strong{flashrom -p host -r flash.img}@* Then, the @strong{cros-flash-replace} script has to be executed as such:@* # @strong{./cros-flash-replace flash.img coreboot ro-frid}@* If any error is shown, it is definitely a bad idea to go further than this point. +If you are getting @strong{"./cros-flash-replace: Permission denied"} error, it might be that ChromeOS automatically mounts your drive with @strong{noexec} flag for security reasons. You can check if your device is mounted noexec:@* # @strong{mount -l}@* Manually re-mounting the device solves the problem (replace /dev/sda1 with correct partition path and /mnt with desired mount point:@* # @strong{umount /dev/sda1 && mount /dev/sda1 /mnt} + The resulting flash image can then be flashed back:@* # @strong{flashrom -p host -w flash.img}@* You should also see within the output the following:@* @strong{"Verifying flash... VERIFIED."} @@ -2648,6 +2651,21 @@ You should also see within the output the following:@* @strong{"Verifying flash. The device will now boot to Libreboot. +@node Warning with Disabling Developer Mode +@c @subsubheading Warning with Developer Mode + +@c QUESTION: are we sure that default flasg are dev_boot_usb=0 and dev_boot_signed_only=0? +Disabling the developer mode resets the verified boot parameters to: +@itemize +@item +Kernels signature verification: @emph{disabled} +@item +External media boot: @emph{disabled} +@end itemize + +If you have installed a custom kernel to external device, and wiped the internal device, it may cause your device to be bricked @strong{if you disable the developer mode (by pressing space at boot screen)}. Make sure your custom kernel resides on internal device before disabling the developer mode, or do not disable it at all until you know everyhing works fine. + +However if you have mistakenly disabled developer mode and locked yourself out, Google's recovery image can still be of use. See @uref{https://lists.nongnu.org/archive/html/libreboot/2016-06/msg00021.html, this} post on mailing list. If that did not help, the final solution would be using @ref{Installing Libreboot externally with a SPI flash programmer,SPI flash programmer}. |