summaryrefslogtreecommitdiffstats
path: root/docs/src
diff options
context:
space:
mode:
Diffstat (limited to 'docs/src')
-rw-r--r--docs/src/archive_old.texi2058
-rw-r--r--docs/src/depthcharge/index.texi213
-rw-r--r--docs/src/future/index.texi516
-rw-r--r--docs/src/future/old.texi203
-rw-r--r--docs/src/git/index.texi947
-rw-r--r--docs/src/gnulinux/configuring_parabola.texi482
-rw-r--r--docs/src/gnulinux/encrypted_parabola.texi414
-rw-r--r--docs/src/gnulinux/encrypted_trisquel.texi347
-rw-r--r--docs/src/gnulinux/grub_boot_installer.texi157
-rw-r--r--docs/src/gnulinux/grub_cbfs.texi178
-rw-r--r--docs/src/gnulinux/grub_config.texi119
-rw-r--r--docs/src/gnulinux/index.texi58
-rw-r--r--docs/src/grub/index.texi116
-rw-r--r--docs/src/hardware/index.texi48
-rw-r--r--docs/src/hardware/t60_heatsink.texi91
-rw-r--r--docs/src/hardware/t60_lcd_15.texi59
-rw-r--r--docs/src/hardware/x60_heatsink.texi116
-rw-r--r--docs/src/hardware/x60_keyboard.texi43
-rw-r--r--docs/src/hardware/x60_lcd_change.texi37
-rw-r--r--docs/src/hcl/c201.texi161
-rw-r--r--docs/src/hcl/gm45_lcd.texi298
-rw-r--r--docs/src/hcl/gm45_remove_me.texi437
-rw-r--r--docs/src/hcl/index.texi543
-rw-r--r--docs/src/hcl/kfsn4-dre.texi88
-rw-r--r--docs/src/hcl/kgpe-d16.texi326
-rw-r--r--docs/src/hcl/r400.texi70
-rw-r--r--docs/src/hcl/r500.texi190
-rw-r--r--docs/src/hcl/t400.texi88
-rw-r--r--docs/src/hcl/t500.texi98
-rw-r--r--docs/src/hcl/x200.texi220
-rw-r--r--docs/src/index.texi135
-rw-r--r--docs/src/install/bbb_ehci.texi400
-rw-r--r--docs/src/install/bbb_setup.texi284
-rw-r--r--docs/src/install/c201.texi163
-rw-r--r--docs/src/install/index.texi274
-rw-r--r--docs/src/install/kgpe-d16.texi66
-rw-r--r--docs/src/install/r400_external.texi296
-rw-r--r--docs/src/install/r500_external.texi241
-rw-r--r--docs/src/install/t400_external.texi296
-rw-r--r--docs/src/install/t500_external.texi296
-rw-r--r--docs/src/install/t60_unbrick.texi152
-rw-r--r--docs/src/install/x200_external.texi277
-rw-r--r--docs/src/install/x60_unbrick.texi164
-rw-r--r--docs/src/install/x60tablet_unbrick.texi112
-rw-r--r--docs/src/maintain/index.texi315
-rw-r--r--docs/src/misc/index.texi156
-rw-r--r--docs/src/misc/patch.texi97
-rw-r--r--docs/src/release.texi186
-rw-r--r--docs/src/security/dock.texi151
-rw-r--r--docs/src/security/index.texi40
-rw-r--r--docs/src/security/t60_security.texi284
-rw-r--r--docs/src/security/x60_security.texi232
-rw-r--r--docs/src/tasks.texi308
53 files changed, 13646 insertions, 0 deletions
diff --git a/docs/src/archive_old.texi b/docs/src/archive_old.texi
new file mode 100644
index 0000000..b8eac7b
--- /dev/null
+++ b/docs/src/archive_old.texi
@@ -0,0 +1,2058 @@
+\input texinfo
+@documentencoding UTF-8
+
+@macro textstrikeout{text}
+~~\text\~~
+@end macro
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title Libreboot release information (old)
+@end titlepage
+
+@node Top
+@top Libreboot release information (old)
+
+@menu
+* Libreboot release information old::
+* Release 20150518::
+* Release 20150124 20150126 and 20150208::
+* Release 20141015::
+* 6th release pre-release 7th beta::
+* Release 20140622 5th release::
+* Release 20140221 4th release::
+* r20131214 3rd release::
+* r20131213 2nd release::
+* r20131212 1st release::
+@end menu
+
+@node Libreboot release information old
+@chapter Libreboot release information (old)
+@anchor{#libreboot-release-information-old}
+Information for this release can be found at @uref{release.html,release.html}. Updated versions of libreboot can be found at @uref{http://libreboot.org/,libreboot.org}.
+
+@strong{This page is *obsolete*, provided for historical purposes.}
+@menu
+* Releases::
+@end menu
+
+@node Releases
+@section Releases
+@anchor{#releases}
+@itemize
+@item
+@ref{#release20150518,r20150518 (18th May 2015)}
+@item
+@ref{#release20150124,r20150124 (24th January 2015), r20150126 (26th January 2015), r20150208 (8th February 2015)}
+@item
+@ref{#release20141015,r20141015 (15th October 2014)}
+@item
+@ref{#release20140911,r20140911 (6th release)} (11th September 2014 @strong{pre-release, 7th beta})
+@item
+@ref{#release20140622,r20140622 (5th release)} (7th March 2014, revised 22nd June 2014)
+@item
+@ref{#release20140221,r20140221 (4th release)} (21st February 2014)
+@item
+@ref{#release20131214,r20131214 (3rd release)} (14th December 2013)
+@item
+@ref{#release20131213,r20131213 (2nd release)} (13th December 2013)
+@item
+@ref{#release20131212,r20131212 (1st release)} (12th December 2013)
+@end itemize
+
+@node Release 20150518
+@chapter Release 20150518
+@anchor{#release-20150518}
+Release date: 18th May 2015.
+
+Installation instructions can be found at @strong{@emph{install/index.html}}. Building instructions (for source code) can be found at @strong{@emph{git/index.html#build}}.
+@menu
+* Machines supported in this release::
+* Changes for this release relative to r20150208 earliest changes last recent changes first::
+@end menu
+
+@node Machines supported in this release
+@section Machines supported in this release:
+@anchor{#machines-supported-in-this-release}
+@itemize
+@item
+@strong{ThinkPad X60/X60s}
+@itemize
+@item
+You can also remove the motherboard from an X61/X61s and replace it with an X60/X60s motherboard. An X60 Tablet motherboard will also fit inside an X60/X60s.
+@end itemize
+
+@item
+@strong{ThinkPad X60 Tablet} (1024x768 and 1400x1050) with digitizer support
+@itemize
+@item
+See @strong{@emph{hcl/index.html#supported_x60t_list}} for list of supported LCD panels
+@item
+It is unknown whether an X61 Tablet can have it's mainboard replaced with an X60 Tablet motherboard.
+@end itemize
+
+@item
+@strong{ThinkPad T60} (Intel GPU) (there are issues; see below):
+@itemize
+@item
+See notes below for exceptions, and @strong{@emph{hcl/index.html#supported_t60_list}} for known working LCD panels.
+@item
+It is unknown whether a T61 can have it's mainboard replaced with a T60 motherboard.
+@item
+See @strong{@emph{future/index.html#t60_cpu_microcode}}.
+@item
+T60P (and T60 laptops with ATI GPU) will likely never be supported: @strong{@emph{hcl/index.html#t60_ati_intel}}
+@end itemize
+
+@item
+@strong{ThinkPad X200}
+@itemize
+@item
+X200S and X200 Tablet are also supported, conditionally; see @strong{@emph{hcl/x200.html#x200s}}
+@item
+@strong{ME/AMT}: libreboot removes this, permanently. @strong{@emph{hcl/gm45_remove_me.html}}
+@end itemize
+
+@item
+@strong{ThinkPad R400}
+@itemize
+@item
+See @strong{@emph{hcl/r400.html}}
+@item
+@strong{ME/AMT}: libreboot removes this, permanently. @strong{@emph{hcl/gm45_remove_me.html}}
+@end itemize
+
+@item
+@strong{ThinkPad T400}
+@itemize
+@item
+See @strong{@emph{hcl/t400.html}}
+@item
+@strong{ME/AMT}: libreboot removes this, permanently. @strong{@emph{hcl/gm45_remove_me.html}}
+@end itemize
+
+@item
+@strong{ThinkPad T500}
+@itemize
+@item
+See @strong{@emph{hcl/t500.html}}
+@item
+@strong{ME/AMT}: libreboot removes this, permanently. @strong{@emph{hcl/gm45_remove_me.html}}
+@end itemize
+
+@item
+@strong{Apple MacBook1,1} (MA255LL/A, MA254LL/A, MA472LL/A)
+@itemize
+@item
+See @strong{@emph{hcl/index.html#macbook11}}.
+@end itemize
+
+@item
+@strong{Apple MacBook2,1} (MA699LL/A, MA701LL/A, MB061LL/A, MA700LL/A, MB063LL/A, MB062LL/A)
+@itemize
+@item
+See @strong{@emph{hcl/index.html#macbook21}}.
+@end itemize
+
+@end itemize
+
+@node Changes for this release relative to r20150208 earliest changes last recent changes first
+@section Changes for this release, relative to r20150208 (earliest changes last, recent changes first)
+@anchor{#changes-for-this-release-relative-to-r20150208-earliest-changes-last-recent-changes-first}
+@itemize
+@item
+Add a whitelist entry to board_enable.c in flashrom, for the ThinkPad R400, T400 and T500
+@item
+Updated flashrom (to SVN revision 1889)
+@itemize
+@item
+X200 whitelist patch removed (merged upstream)
+@item
+X200 whitelist modified to include X200S and X200 Tablet
+@end itemize
+
+@item
+libreboot_util: don't include cmos layout files (not needed anymore)
+@item
+@strong{coreboot-libre: backport patches for X200 Tablet digitizer support}
+@item
+build/release/archives: create SHA512 sum manifest file of the release archives
+@item
+build/release/archives: separate crossgcc into a new archive
+@item
+disabled generation of txtmode ROM images for now (they will be back again in the next release)
+@item
+coreboot-libre: delete unused code (reduce size of src archive)
+@item
+Flashing guides: make them more friendly to colourblind people
+@item
+gnulinux/encrypted_*.html: Remove mention of password length - it was arbitrary and pointless.
+@item
+maintain/index.html: Finish the guide
+@item
+scripts/download/coreboot: use diffs included in libreboot, not external gerrit cherry-picks - review.coreboot.org (gerrit) being down no longer kills libreboot (backup mirrors of the master repository exist)
+@item
+install/bbb_setup.html: Add info about wp/hold and pinouts
+@item
+index.html: improve the description of libreboot
+@item
+hcl/gm45_remove_me.html: notes about the demefactory utility
+@item
+install/bbb_setup.html: EHCI debug: recommend linux-libre
+@item
+install/bbb_setup.html: EHCI Debug logging setup guide
+@item
+hcl/t500.html: Add screen compatibility report (TODO: fix incompatible screens)
+@item
+Update coreboot(again) + merge GM45 hybrid GPU patches - means that T400/T500 with the ATI+Intel hybrid GPU setup will work (ATI disabled, Intel permanently enabled). power_on_after_fail nvram option added to all GM45 boards, defaulting to No, so that plugging it AC doesn't boot up the system against the users will. Net20DC is now the default debug dongle on all boards (compatible with BBB).
+@item
+demefactory (new utility): create GM45 factory.rom without the ME
+@item
+ich9deblob: re-factor descriptor.c functions
+@item
+hcl/t500.html: add hardware logs
+@item
+gnulinux/encrypted_*.html: No password for default entry
+@item
+git/index.html: Add more details about BUC.TS
+@item
+grub.cfg: Also scan for grub2/grub.cfg, not just grub/grub.cfg
+@item
+maintain/ (new section. WIP!): Maintaining libreboot
+@item
+gnulinux/grub_boot_installer.html: Fix hazardous instruction
+@item
+tasks.html: Better categorization between intel/amd/arm
+@item
+install/bbb_setup.html: notes about SPI flashing stability
+@item
+install/bbb_setup.html: more names for the 0.1" cables
+@item
+install/*_external.html: add disclaimer about thermal paste
+@item
+install/bbb_setup.html: Fix broken links
+@item
+install/bbb_setup.html: preliminary notes about EHCI debug
+@item
+hcl/gm45_remove_me.html: Link to websites talking about the ME
+@item
+install/@{t400,t500,r400@}_external.html: Notes about CPU compatibility
+@item
+Delete the ich9macchange script. It's useless, and confuses people
+@item
+hcl/gm45_remove_me.html: prioritize ich9gen executable path
+@item
+hcl/gm45_remove_me.html: prioritize changing mac address
+@item
+hcl/gm45_remove_me.html: less confusing notes about ich9gen
+@item
+build/dependencies/parabola: Add dependencies for x86_64
+@item
+Move parabola/trisquel dependency scripts to scripts/helpers/build
+@item
+scripts/dependencies/paraboladependencies: build dependencies (32-bit Parabola)
+@item
+@strong{New board}: ThinkPad T500
+@item
+Add diffs for descriptor/gbe differences between T500 and X200
+@item
+coreboot-libre: provide better blob categorization
+@item
+hcl/gm45_remove_me.html: add notes about flash write protect
+@item
+@strong{New board}: ThinkPad T400
+@item
+GRUB: add partial vesamenu.c32 support (fixes tails ISOLINUX menu)
+@item
+Update GRUB (to revision fa07d919d1ff868b18d8a42276d094b63a58e299)
+@item
+Update coreboot (to revision 83b05eb0a85d7b7ac0837cece67afabbdb46ea65)
+@itemize
+@item
+Intel CPU microcode (most of it) no longer deleted, because it was deleted upstream (moved to a 3rd party repository).
+@item
+MacBook2,1 cstate patch is no longer cherry picked (merged upstream)
+@item
+Patch to disable use of timestamps in coreboot no longer included (merged upstream)
+@end itemize
+
+@item
+coreboot-libre: don't list vortex86ex kbd firmware as microcode (list it separately)
+@item
+coreboot-libre: don't rm */early_setup_ss.h (these are not blobs)
+@item
+coreboot-libre: add GPLv3 license to the findblobs script
+@item
+coreboot-libreboot: don't rm raminit_tables (nahelem/sandybridge) (they are not blobs)
+@item
+coreboot-libre: don't delete the .spd.hex files (they are not blobs)
+@item
+build/release/archives: don't put rmodtool in libreboot_util
+@item
+install/x200_external.html: recommend installing GNU/Linux at the end
+@item
+install/x200_external.html: add more photos, improve instructions
+@item
+build/clean/grub: use distclean instead of clean
+@item
+grub-assemble: Add the @emph{bsd} and @emph{part_bsd} modules
+@item
+build/roms/withgrub: Only run ich9gen if gm45/gs45 images exist
+@item
+git/index.html: Add notes about building for specific boards
+@item
+build/roms/withgrub: Allow building for a custom range of boards
+@item
+grub-assemble: Disable verbose output
+@item
+Add documentation on how to unlock root encrypted fs with key in initramfs in Parabola Linux
+@item
+gnulinux/grub_cbfs.html: Improve structure (easier to use)
+@item
+grub.cfg: Disable the beep on startup
+@item
+install/bbb_setup.html: Make the guide easier to use
+@item
+gnulinux/grub_cbfs.html: Remove redundant instructions
+@item
+install/x200_external.html: Mark pins in the images
+@item
+install/bbb_setup.html: Replace 3.3V PSU photo with ATX PSU
+@item
+hcl/x200.html: Add dumps from 4-MiB X200 with Lenovo BIOS 3.22
+@item
+hcl/x200.html: Add dumps from 4-MiB X200 with Lenovo BIOS 3.18
+@item
+grub.cfg: add syslinux_configfile menuentry for ahci0
+@item
+grub.cfg: Add more paths for syslinux_configfile
+@item
+future.html: T60: Add EDID dump from LG-Philips LP150E05-A2K1
+@item
+install/bbb_setup.html: Further clarify which clip is needed
+@item
+bash scripts: Make script output more user-friendly in general
+@item
+bash scripts: Only enable verbose output if DEBUG= is used
+@item
+build: Support multiple extra options - now possible to build multiple images for arbitrary boards (configs), but without building the entire collection.
+@item
+Deleted the signing archive key - the finger print and ID is given instead, so that the user can download it from a key server
+@item
+scripts/helpers/build/release: Move docs to separate archive - reduces the size of the other archives considerably
+@item
+Move DEBLOB to resources/utilities/coreboot-libre/deblob
+@item
+scripts/helpers/build/release: Delete DEBLOB from libreboot_src/ - not needed in libreboot_src (release archive) because it contains a coreboot revision that has already been deblobbed.
+@item
+flash (script): Use @emph{build} instead of @emph{DEBLOB} to know if in src
+@item
+install/r400_external.html: Show images, don't link.
+@item
+install/x200_external.html: Show images, don't link.
+@item
+install/bbb_setup.html: Show images, instead of linking
+@item
+Documentation: optimize all images (reduce file sizes)
+@item
+Remove download links from the release page (and the archive page) - release archives are hosted differently following this release, which means that the old methods are no longer viable.
+@item
+Moved ich9macchange to resources/scripts/misc/ich9macchange
+@item
+ich9macchange: assume that the script is being run from _util (act only on one ROM image, defined by a user-provided path)
+@item
+Move grub-background to resources/scripts/misc/grub-background
+@item
+grub-background: assume that it is being run from libreboot_util
+@item
+grub-background: change only one ROM image, specified by path
+@item
+build (release archives): Add the commitid file to release/
+@item
+build-release: Move the release archives to release/
+@item
+Merge all build scripts into a single generic script, with helpers in resources/scripts/helpers/build/
+@item
+Replace @emph{getall} with @emph{download}, which takes as input an argument specifying which program the user wants to download.
+@item
+Moved the get scripts to resources/scripts/helpers/download/
+@item
+build-release: Remove the powertop entries
+@item
+Moved powertop.trisquel7 to resources/scripts/misc/
+@item
+Deleted the powertop.trisquel6 script (Trisquel 6 is obsolete)
+@item
+Documentation: general improvements to the flashing instructions
+@item
+Merged all flashing scripts into a single script
+@item
+Updated GRUB
+@item
+bucts: Make it build without git
+@item
+Moved dejavu-fonts-ttf-2.34/AUTHORS to resources/grub/font/
+@item
+Deleted GRUB Invaders from libreboot
+@item
+Deleted SeaBIOS from libreboot
+@item
+build-release: optimize use of tar (reduced file sizes)
+@item
+grub.cfg: add another SYSLINUX config location (/syslinux/syslinux.cfg)
+@item
+build-release: remove the bin/ directory from libreboot_util
+@item
+cleandeps: delete the bin/ directory
+@item
+buildrom-withgrub: create the bin directory if it does not exist
+@item
+coreboot-libre: don't use git for version timestamp
+@item
+i945-pwm: add clean command to Makefile
+@item
+i945-pwm: add -lz to Makefile
+@item
+install/x200_external: Mention GPIO33 non-descriptor mode
+@item
+hcl/index.html: Remove redundant links
+@item
+ich9macchange: Add R400
+@item
+build-release: Separate ROM images into individual archives
+@item
+build-release: rename libreboot_bin to libreboot_util
+@item
+@strong{New board:} ThinkPad R400 support added to libreboot.
+@item
+bbb_setup.html: tell user to use libreboot's own flashrom
+@end itemize
+
+@node Release 20150124 20150126 and 20150208
+@chapter Release 20150124, 20150126 and 20150208
+@anchor{#release-20150124-20150126-and-20150208}
+Release date: 24th January 2015.
+@menu
+* Machines supported in this release::
+* Revisions for r20150208 relative to r20150126::
+* Revisions for r20150126 relative to r20150124::
+* Changes for this release latest changes first earliest changes last::
+@end menu
+
+@node Machines supported in this release
+@section Machines supported in this release:
+@anchor{#machines-supported-in-this-release-1}
+@itemize
+@item
+@strong{Lenovo ThinkPad X60/X60s}
+@itemize
+@item
+You can also remove the motherboard from an X61/X61s and replace it with an X60/X60s motherboard. An X60 Tablet motherboard will also fit inside an X60/X60s.
+@end itemize
+
+@item
+@strong{Lenovo ThinkPad X60 Tablet} (1024x768 and 1400x1050) with digitizer support
+@itemize
+@item
+See @strong{hcl/index.html#supported_x60t_list} for list of supported LCD panels
+@item
+It is unknown whether an X61 Tablet can have it's mainboard replaced with an X60 Tablet motherboard.
+@end itemize
+
+@item
+@strong{Lenovo ThinkPad T60} (Intel GPU) (there are issuesinstall/x200_external.html; see below):
+@itemize
+@item
+See notes below for exceptions, and @strong{hcl/index.html#supported_t60_list} for known working LCD panels.
+@item
+It is unknown whether a T61 can have it's mainboard replaced with a T60 motherboard.
+@item
+See @strong{future/index.html#t60_cpu_microcode}.
+@item
+T60P (and T60 laptops with ATI GPU) will likely never be supported: @strong{hcl/index.html#t60_ati_intel}
+@end itemize
+
+@item
+@strong{Lenovo ThinkPad X200}
+@itemize
+@item
+X200S and X200 Tablet are also supported, conditionally; see @strong{hcl/x200.html#x200s}
+@item
+@strong{ME/AMT}: libreboot removes this, permanently. @strong{hcl/gm45_remove_me.html}
+@end itemize
+
+@item
+@strong{Lenovo ThinkPad R400} (r20150208 and later, only)
+@itemize
+@item
+@strong{ME/AMT}: libreboot removes this, permanently. @strong{hcl/gm45_remove_me.html}
+@end itemize
+
+@item
+@strong{Apple MacBook1,1} (MA255LL/A, MA254LL/A, MA472LL/A)
+@itemize
+@item
+See @strong{hcl/index.html#macbook11}.
+@end itemize
+
+@item
+@strong{Apple MacBook2,1} (MA699LL/A, MA701LL/A, MB061LL/A, MA700LL/A, MB063LL/A, MB062LL/A)
+@itemize
+@item
+See @strong{hcl/index.html#macbook21}.
+@end itemize
+
+@end itemize
+
+@node Revisions for r20150208 relative to r20150126
+@section Revisions for r20150208 (relative to r20150126)
+@anchor{#revisions-for-r20150208-relative-to-r20150126}
+This is a maintenance release (polishing) based on r20150126. Users who installed r20150126 don't really need to update to this release.
+
+@itemize
+@item
+buildrom-withgrub: use gnulove.jpg background on 16:10 laptops (MacBook2,1 and X200)
+@item
+build-release: include grub-background script in libreboot_bin
+@item
+grub-background (new): lets user change GRUB background image
+@item
+grub-assemble: Add link to original utility.
+@item
+buildrom-withgrub: Put background.jpg in CBFS, not GRUB memdisk
+@item
+grub-assemble: merge scripts into a single script gen.sh
+@item
+Documentation: implement theme, drastically improve readability
+@item
+hcl/index.html: update list of compatible T60 LCD panels
+@item
+index.html: more clarification of libreboot's stated purpose.
+@item
+build-release: include the commitid file in the release archives
+@item
+index.html: Further emphasize the GNU/Linux requirement.
+@item
+lenovobios_firstflash: fix BASH errors
+@item
+lenovobios_secondflash: fix BASH errors
+@item
+install/x200_external.html: Tell user to switch MAC address.
+@item
+git/index.html: Add to the list of x86_64 compatible hosts.
+@item
+install/index.html: Remove old (obsolete) information.
+@item
+git/index.html: Say that the build dependencies are for src (and not nedeed for libreboot_bin)
+@item
+build: re-factor the descriptor/gbe generating loop for GM45/ICH9M
+@item
+X60, X60S and X60 Tablet now the same ROM images.
+@item
+Add QEMU (q35/ich9) support to libreboot.
+@item
+Add QEMU (i440fx/piix4) support to libreboot
+@item
+index.html: Re-write the description of what libreboot is.
+@item
+release.html: Add notes about how to use GPG.
+@item
+build-release: delete the commitid file from release archives
+@item
+build-release: create file named commitid after build-release
+@end itemize
+
+@node Revisions for r20150126 relative to r20150124
+@section Revisions for r20150126 (relative to r20150124)
+@anchor{#revisions-for-r20150126-relative-to-r20150124}
+This is a bug fix release based on r20150124. It contains a few small changes:
+
+@itemize
+@item
+grub.cfg: hardcode the list of partitions to search (speeds up booting considerably. GRUB regexp isn't very well optimized)
+@item
+Docs (x200.html hcl): Remove incorrect information
+@item
+Documentation (bbb_setup.html): Fix typos
+@item
+build-release: delete ich9fdgbe_@{4m,8m@}.bin files from ich9gen
+@itemize
+@item
+These were accidentically included in the r20150124 release. They are generated from ich9gen so it's ok, but they don't need to be in the archive.
+@end itemize
+
+@item
+Documentation (grub_cbfs.html): Looping in libreboot_grub.cfg (Add notes about it if the user copied from grub.cfg in CBFS.)
+@item
+Documentation: refer to Guix as GNU Guix System Distribution or GNU GSD per advice from the Guix project.
+@end itemize
+
+@node Changes for this release latest changes first earliest changes last
+@section Changes for this release (latest changes first, earliest changes last)
+@anchor{#changes-for-this-release-latest-changes-first-earliest-changes-last}
+@itemize
+@item
+Documentation: added information about how to boot Guix GNU/Linux.
+@item
+grub.cfg: Added (usb0) and (usb0,*) to the list of devices in the @emph{Search for GRUB} menuentry (this is needed for Guix GNU/Linux)
+@item
+grub.cfg: Added (ahci1) to list of devices for ISOLINUX parser (CD/DVD) (this is needed for the X200 docking station).
+@item
+grub.cfg: ISOLINUX parsing is now done on all USB partitions.
+@item
+grub.cfg: Automatically switched to /boot/grub/libreboot_grub.cfg on a partition, if it exists.
+@item
+libreboot_bin: added static ARM binaries for flashrom, cbfstool, ich9gen and ich9deblob (tested on beaglebone black).
+@item
+Flashrom: removed redundant Macronix flashchip definitions (for X200 owners).
+@item
+Flashrom: added whitelist for ThinkPad X200.
+@item
+X200: fixed uneven backlight (at low levels)
+@item
+ich9macchange (new script, uses ich9gen): for changing the default MAC address on X200 ROM images.
+@item
+ich9gen: added capability to change the default MAC address (and update the checksum)
+@item
+ich9deblob: added new utility ich9gen: this can generate a descriptor+gbe image without a factory.rom dump present.
+@item
+Modified ich9deblob to use a struct for Gbe, documenting everything.
+@item
+Massively updated the ich9deblob utility: re-factored everything completely.
+@item
+Enabled cstates 1 and 2 on macbook21. This reduces idle heat / power consumption.
+@item
+buildrom-withgrub: disabled creation of *txtmode*.rom for X200 (only framebuffer graphics work)
+@item
+Updated SeaBIOS (again)
+@item
+install/index.html#flashrom_x200: improve instructions
+@item
+Updated flashrom (again) - patches updated
+@item
+Updated GRUB (again)
+@item
+Updated coreboot (again)
+@item
+build-release: not all files were copied to libreboot_src. fix that.
+@item
+build-release: include cbmem (statically compiled) in libreboot_bin
+@item
+Documentation (X200): added software-based flashing instructions
+@item
+Documentation: remove all references to the bus pirate (replaced with BBB flashing tutorials)
+@item
+@strong{New board:} ThinkPad X200S and X200 Tablet support added to libreboot
+@item
+build: automatically find board names (configs) to build for
+@item
+@strong{New board:} ThinkPad X200 support added to libreboot
+@item
+coreboot-libre config (all boards): enable USB dongle log output (for BeagleBone Black)
+@item
+cleandeps: actually clean grubinvaders
+@item
+.gitignore: add powertop directory
+@item
+cleandeps: clean i945-pwm utility
+@item
+scripts (all): fix typos
+@item
+Documentation: general cleanup.
+@item
+builddeps-flashrom: reduce build commands to a single for loop
+@item
+scripts (all): replace unnecessary rm -Rf with rm -f
+@item
+powertop.trisquel7: remove sudo (script already checks if the user is root)
+@item
+release.html: add lenovo g505s to the list of candidates
+@item
+.gitignore: add libreboot_bin.tar.xz and libreboot_src.tar.xz
+@item
+libreboot_bin.tar.xz: Include utils as statically linked binaries
+@itemize
+@item
+This means that the user does not have to install build dependency or build from source anymore.
+@end itemize
+
+@item
+deps-trisquel: Add binutils-source
+@item
+powertop.trisquel7 (new): Setup powertop on trisquel 7
+@item
+deps-trisquel,flash,lenovobios_firstflash,lenovobios_secondflash,macbook21_firstflash x60flashfrom5,powertop.trisquel6: check if user is root
+@item
+deps-trisquel: Make GRUB build on in Trisquel 7 x86_64. (cross compile dependencies. fixes build error in GRUB)
+@item
+deps-parabola (removed) Remove Parabola dependencies script. Will re-add later (properly tested)
+@item
+grub.cfg: Add more path checks to isolinux parser (more ISOs should work now)
+@item
+Update SeaBIOS
+@item
+x60flashfrom5 (new), for X60 users upgrading from 5th/early release
+@item
+Update flashrom
+@item
+Update GRUB
+@item
+Updated coreboot-libre
+@itemize
+@item
+i945: permanently set tft_brightness to 0xff (fixes bug on X60 where turning up brightness at max would make it loop back to low brightness)
+@end itemize
+
+@item
+getcb: Revert X60/T60 to legacy backlight controls
+@itemize
+@item
+The ACPI brightness patches were abandoned and obsolete.
+@end itemize
+
+@item
+grub.cfg: Only load initrd.img if it exists. Add rw to linux line (for ProteanOS)
+@item
+build: Only generate the GRUB configurations once (re-use on all images)
+@item
+Only build 2 GRUB payload executables, re-use on all boards.
+@item
+resources/utilities/grub-assemble/gen.txtmode.sh: Use GNU BASH@* resources/utilities/grub-assemble/gen.vesafb.sh: Use GNU BASH
+@item
+scripts (error handling): Replace exit with exit 1 (make debugging easier)
+@item
+Move most files in CBFS to GRUB memdisk, except grub.cfg and grubtest.cfg
+@itemize
+@end itemize
+
+@item
+release.html Add DMP vortex86ex to list of candidates.
+@item
+release.html Add ThinkPad X201 to list of candidates.
+@item
+New links added to security/x60_security and security/t60_security
+@item
+lenovobios_secondflash: Warn if BUCTS is not present. (not a dealbreaker. Can just pull out nvram battery/coin).
+@item
+lenovobios_firstflash: Fail if BUCTS fails. (anti-bricking precaution)
+@item
+Removed obnoxious warnings from flashing scripts, improved documentation instead.
+@item
+scripts (all): add proper error checking (fail fast, fail early. Do not continue if there are errors)
+@item
+buildrom-withgrub: rename image to boardname_layout_romtype.rom
+@item
+buildrom-withgrub: don't move cbfstool, execute directly
+@item
+resources/utilities/grub-assemble: add French Dvorak (BEPO) keyboard layout.
+@item
+Documentation: add hardware/x60_keyboard.html (show how to replace keyboard on X60/X60T)
+@item
+Documentation: major cleanup (better structure, easier to find things)
+@item
+release.html: Remove Acer CB5 from list of future candidates.
+@itemize
+@item
+Too many issues. Chromebooks are crippled (soldered RAM/storage/wifi) and have too many usability issues for the libreboot project.
+@end itemize
+
+@item
+gnulinux/grub_cbfs.html Major cleanup. Usability improvements.
+@item
+hocs/gnulinux/encrypted_trisquel.html: Fixed mistakes/typos. General improvements
+@item
+flash (flashrom script): remove boardmismatch=force
+@itemize
+@item
+This was put there before for users upgrading from libreboot r5 to r6, but also allows the user to flash the wrong image. For example, the user could flash a T60 image on an X60, thus bricking the system. It's almost certain that most people have upgraded by now, so remove this potentially dangerous option.
+@end itemize
+
+@item
+Documentation: update compatibility list for X60T LCD panels.
+@item
+release.html: add note about X60 Tablet board in X60/X60s
+@item
+howtos/grub_boot_installer.html: small corrections
+@item
+howtos/grub_boot_installer.html: improved readability, fixed html errors
+@item
+Documentation (macbook21 related): clean up
+@end itemize
+
+@node Release 20141015
+@chapter Release 20141015
+@anchor{#release-20141015}
+@menu
+* Machines supported in this release::
+* Changes for this release latest changes first earliest changes last::
+@end menu
+
+@node Machines supported in this release
+@section Machines supported in this release:
+@anchor{#machines-supported-in-this-release-2}
+@itemize
+@item
+@strong{Lenovo ThinkPad X60/X60s}
+@itemize
+@item
+You can also remove the motherboard from an X61/X61s and replace it with an X60/X60s motherboard. An X60 Tablet motherboard will also fit inside an X60/X60s.
+@end itemize
+
+@item
+@strong{Lenovo ThinkPad X60 Tablet} (1024x768 and 1400x1050) with digitizer support
+@itemize
+@item
+See @strong{hcl/index.html#supported_x60t_list} for list of supported LCD panels
+@item
+It is unknown whether an X61 Tablet can have its mainboard replaced with an X60 Tablet motherboard.
+@end itemize
+
+@item
+@strong{Lenovo ThinkPad T60} (Intel GPU) (there are issues; see below):
+@itemize
+@item
+See notes below for exceptions, and @strong{hcl/index.html#supported_t60_list} for known working LCD panels.
+@item
+It is unknown whether a T61 can have its mainboard replaced with a T60 motherboard.
+@item
+See @strong{future/index.html#t60_cpu_microcode}.
+@item
+T60P (and T60s with ATI GPU) will likely never be supported: @strong{hcl/index.html#t60_ati_intel}
+@end itemize
+
+@item
+@strong{Apple MacBook1,1} (MA255LL/A, MA254LL/A, MA472LL/A)
+@itemize
+@item
+See @strong{hcl/index.html#macbook11}.
+@end itemize
+
+@item
+@strong{Apple MacBook2,1} (MA699LL/A, MA701LL/A, MB061LL/A, MA700LL/A, MB063LL/A, MB062LL/A)
+@itemize
+@item
+See @strong{hcl/index.html#macbook21}.
+@end itemize
+
+@end itemize
+
+@node Changes for this release latest changes first earliest changes last
+@section Changes for this release (latest changes first, earliest changes last)
+@anchor{#changes-for-this-release-latest-changes-first-earliest-changes-last-1}
+@itemize
+@item
+Updated coreboot (git commit 8ffc085e1affaabbe3dca8ac6a89346b71dfc02e), the latest at the time of writing.
+@item
+Updated SeaBIOS (git commit 67d1fbef0f630e1e823f137d1bae7fa5790bcf4e), the latest at the time of writing.
+@item
+Updated Flashrom (svn revision 1850), the latest at the time of writing.
+@item
+Updated GRUB (git commit 9a67e1ac8e92cd0b7521c75a734fcaf2e58523ad), the latest at the time of writing.
+@item
+Cleaned up the documentation, removed unneeded files.
+@item
+ec/lenovo/h8 (x60/x60s/x60t/t60): Enable wifi/bluetooth/wwan/touchpad/trackpoint by default.
+@item
+Documentation: Updated list of T60 LCDs (Samsung LTN150XG 15" XGA listed as non-working).
+@item
+builddeps-coreboot: Don't build libpayload (not needed. This was leftover by mistake, when trying out the TINT payload).
+@item
+Replaced most diff files (patches) for coreboot with gerrit checkouts (cherry-pick).
+@item
+Documentation: x60_security.html and t60_security.html: added links to info about the ethernet controller (Intel 82573).
+@item
+Documentation: x60_security.html and t60_security.html: added notes about DMA and the docking station.
+@item
+Documentation: configuring_parabola.html: basic post-install steps for Parabola GNU/Linux (helpful, since libreboot development is being moved to Parabola at the time of writing).
+@item
+builddeps-coreboot: use 'make crossgcc-i386' instead of 'make crossgcc'. Libreboot only targets x86 at the time of writing.
+@item
+ROM images no longer include SeaBIOS. Instead, the user adds it afterwards. Documentation and scripts updated.
+@item
+gnulinux/encrypted_parabola.html: Notes about linux-libre-grsec
+@item
+Documentation: encrypted_parabola.html: add tutorial for encrypted Parabola GNU/Linux installation.
+@item
+Documentation: added more info about wifi chipsets
+@end itemize
+
+@ref{#pagetop,Back to top of page.}
+
+@node 6th release pre-release 7th beta
+@chapter 6th release (pre-release, 7th beta)
+@anchor{#th-release-pre-release-7th-beta}
+@itemize
+@item
+Released 11th July 2014 (pre-release) 1st beta
+@item
+Revised (pre-release, 2nd beta) 16th July 2014
+@item
+Revised (pre-release, 3rd beta) 20th July 2014
+@item
+Revised (pre-release, 4th beta) 29th July 2014
+@item
+Revised (pre-release, 5th beta) 11th August 2014 (corrected 11th August 2014)
+@item
+Revised (pre-release, 6th beta) 3rd September 2014
+@item
+Revised (pre-release, 7th beta) 11th September 2014
+@end itemize
+
+@menu
+* Machines still supported compared to previous release::
+* New systems supported in this release::
+* Machines no longer supported compared to previous release::
+* Revisions for r20140911 7th beta 11th September 2014::
+* Revisions for r20140903 6th beta 3rd September 2014::
+* Corrections to r20140811 5th beta 11th August 2014::
+* Revisions for r20140811 5th beta 11th August 2014::
+* Revisions for r20140729 4th beta 29th July 2014::
+* Revisions for r20140720 3rd beta 20th July 2014::
+* Revisions for r20140716 2nd beta 16th July 2014::
+* Revisions for r20140711 1st beta 11th July 2014::
+@end menu
+
+@node Machines still supported compared to previous release
+@section Machines still supported (compared to previous release):
+@anchor{#machines-still-supported-compared-to-previous-release}
+@itemize
+@item
+@strong{Lenovo ThinkPad X60/X60s}
+@itemize
+@item
+You can also remove the motherboard from an X61/X61s and replace it with an X60/X60s motherboard.
+@end itemize
+
+@end itemize
+
+@node New systems supported in this release
+@section New systems supported in this release:
+@anchor{#new-systems-supported-in-this-release}
+@itemize
+@item
+@strong{Lenovo ThinkPad X60 Tablet} (1024x768 and 1400x1050) with digitizer support
+@itemize
+@item
+See @strong{hcl/index.html#supported_x60t_list} for list of supported LCD panels
+@item
+It is unknown whether an X61 Tablet can have its mainboard replaced with an X60 Tablet motherboard.
+@end itemize
+
+@item
+@strong{Lenovo ThinkPad T60} (Intel GPU) (there are issues; see below)
+@itemize
+@item
+See notes below for exceptions, and @strong{hcl/index.html#supported_t60_list} for known working LCD panels.
+@item
+It is unknown whether a T61 can have its mainboard replaced with a T60 motherboard.
+@item
+T60P (and T60s with ATI GPU) will likely never be supported: @strong{hcl/index.html#t60_ati_intel}
+@end itemize
+
+@item
+@strong{Apple MacBook1,1} (MA255LL/A, MA254LL/A, MA472LL/A)
+@itemize
+@item
+See @strong{hcl/index.html#macbook11}.
+@end itemize
+
+@item
+@strong{Apple MacBook2,1} (MA699LL/A, MA701LL/A, MB061LL/A, MA700LL/A, MB063LL/A, MB062LL/A)
+@itemize
+@item
+See @strong{hcl/index.html#macbook21}.
+@end itemize
+
+@end itemize
+
+@node Machines no longer supported compared to previous release
+@section Machines no longer supported (compared to previous release):
+@anchor{#machines-no-longer-supported-compared-to-previous-release}
+@itemize
+@item
+@strong{All previous systems still supported!}
+@end itemize
+
+@node Revisions for r20140911 7th beta 11th September 2014
+@section Revisions for r20140911 (7th beta) (11th September 2014)
+@anchor{#revisions-for-r20140911-7th-beta-11th-september-2014}
+@itemize
+@item
+The changes below were made in a git repository, unlike in previous releases. Descriptions below are copied from 'git log'.
+@item
+Update .gitignore for new dependencies.
+@item
+Use a submodule for i945-pwm.
+@item
+Don't clean packages that fail or don't need cleaning.
+@item
+Don't clean i945-pwm, it's not needed.
+@item
+Regression fix: Parabola live ISO boot issues
+@item
+Re-enable background images in ISOLINUX/SYSLINUX GRUB parser menus
+@item
+Regression fix: Re-add CD-ROM (ata0) in GRUB
+@item
+Documentation: add notes about performance penalty when using ecryptfs.
+@item
+Documentation: Fixed spelling and grammatical errors.
+@item
+Documentation: macbook21: add new system as tested
+@item
+Documentation: macbook21: add info about improving touchpad sensitivity
+@item
+Documentation: X60 Tablet: add more information about finger input
+@item
+Documentation: release.html: Add information about recently merged commit in coreboot
+@end itemize
+
+@node Revisions for r20140903 6th beta 3rd September 2014
+@section Revisions for r20140903 (6th beta) (3rd September 2014)
+@anchor{#revisions-for-r20140903-6th-beta-3rd-september-2014}
+@itemize
+@item
+Added modified builddeb* scripts for Parabola GNU/Linux-libre: buildpac, buildpac-flashrom, buildpac-bucts (courtesy of Noah Vesely)
+@item
+Documentation: updated all relevant areas to mention use of buildpac* scripts for Parabola users.
+@item
+Documentation: added information showing how to enable or disable bluetooth on the X60
+@item
+MacBook1,1 tested! See @strong{hcl/index.html#macbook11}
+@item
+Documentation: fixed typo in index.html#get_edid_panelname (get-edit changed to get-edid)
+@item
+Documentation: added images/x60_lcd_change/ (pics only for now)
+@item
+Added gcry_serpent and gcry_whirlpool to the GRUB module list in the 'build' script (for luks users)
+@item
+@strong{Libreboot is now based on a new coreboot version from August 23rd, 2014:@* Merged commits (relates to boards that were already supported in libreboot):}
+@itemize
+@item
+@uref{http://review.coreboot.org/#/c/6697/,http://review.coreboot.org/#/c/6697/}
+@item
+@uref{http://review.coreboot.org/#/c/6698/,http://review.coreboot.org/#/c/6698/} (merged already)
+@item
+@uref{http://review.coreboot.org/#/c/6699/,http://review.coreboot.org/#/c/6699/} (merged already)
+@item
+@uref{http://review.coreboot.org/#/c/6696/,http://review.coreboot.org/#/c/6696/} (merged already)
+@item
+@uref{http://review.coreboot.org/#/c/6695/,http://review.coreboot.org/#/c/6695/} (merged already)
+@item
+@strong{@uref{http://review.coreboot.org/#/c/5927/,http://review.coreboot.org/#/c/5927/} (merged already)}
+@item
+@uref{http://review.coreboot.org/#/c/6717/,http://review.coreboot.org/#/c/6717/} (merged already)
+@item
+@uref{http://review.coreboot.org/#/c/6718/,http://review.coreboot.org/#/c/6718/} (merged already)
+@item
+@uref{http://review.coreboot.org/#/c/6723/,http://review.coreboot.org/#/c/6723/} (merged already) (text-mode patch, might enable memtest. macbook21)
+@item
+@uref{http://review.coreboot.org/#/c/6732/,http://review.coreboot.org/#/c/6732/} (MERGED) (remove useless ps/2 keyboard delay from macbook21. already merged)
+@end itemize
+
+@item
+These were also merged in coreboot (relates to boards that libreboot already supported):
+@itemize
+@item
+@uref{http://review.coreboot.org/#/c/5320/,http://review.coreboot.org/#/c/5320/} (merged)
+@item
+@uref{http://review.coreboot.org/#/c/5321/,http://review.coreboot.org/#/c/5321/} (merged)
+@item
+@uref{http://review.coreboot.org/#/c/5323/,http://review.coreboot.org/#/c/5323/} (merged)
+@item
+@uref{http://review.coreboot.org/#/c/6693/,http://review.coreboot.org/#/c/6693/} (merged)
+@item
+@uref{http://review.coreboot.org/#/c/6694/,http://review.coreboot.org/#/c/6694/} (merged)
+@item
+@uref{http://review.coreboot.org/#/c/5324/,http://review.coreboot.org/#/c/5324/} (merged)
+@end itemize
+
+@item
+Documentation: removed the section about tft_brightness on X60 (new code makes it obsolete)
+@item
+Removed all patches from resources/libreboot/patch/ and added new patch: 0000_t60_textmode.git.diff
+@item
+Updated getcb script and DEBLOB script.
+@item
+Updated configuration files under resources/libreboot/config/ to accomodate new coreboot version.
+@item
+Removed grub_serial*.cfg and libreboot_serial*.rom, all configs/rom files are now unified (containing same configuration as serial rom files from before).
+@itemize
+@item
+Documentation: updated index.html#rom to reflect the above.
+@end itemize
+
+@item
+Updated GRUB to new version from August 14th, 2014.
+@item
+Unified all grub configurations for all systems to a single grub.cfg under resources/grub/config/
+@item
+Updated flashrom to new version from August 20th, 2014
+@item
+Added getseabios and builddeps-seabios (builddeps and getall were also updated)
+@itemize
+@item
+Added instructions to 'buildrom-withgrub' to include bios.bin.elf and vgaroms/vgabios.bin from SeaBIOS inside the ROM.
+@end itemize
+
+@item
+Added seabios (and sgavgabios) to grub as payload option in menu
+@item
+Disabled serial output in Memtest86+ (no longer needed) to speed up tests.
+@itemize
+@item
+MemTest86+ now works properly, it can output on the laptop screen (no serial port needed anymore).
+@end itemize
+
+@item
+Added getgrubinvaders, builddeps-grubinvaders scripts. Added these to getall and builddeps.
+@itemize
+@item
+Added @uref{http://www.coreboot.org/GRUB_invaders,GRUB Invaders} menu entry in resources/grub/config/grub.cfg
+@end itemize
+
+@item
+Added rules to builddeps-coreboot to build libpayload with TinyCurses. (added appropriate instructions to cleandeps script).
+@item
+Commented out lines in resources/grub/config/grub.cfg for loading font/background (not useful anymore, now that GRUB is in text-mode).
+@item
+Commented out lines in buildrom-withgrub that included backgrounds/fonts (not useful anymore, now that GRUB is in text-mode).
+@item
+Added resources/utilities/i945-pwm/ (from git://git.mtjm.eu/i945-pwm), for debugging acpi brightness on i945 systems.
+@itemize
+@item
+Added instructions for it in builddeps, builddeps-i945pwm, builddeb and cleandeps
+@end itemize
+
+@item
+'build' script: removed the parts that generated sha512sum manifests (not needed, since release tarballs are GPG-signed)
+@item
+'build' script: removed the parts that generated libreboot_meta directory (not needed anymore, since _meta will be hosted in git)
+@itemize
+@item
+Updated index.html#build_meta (and other parts of documentation) to accomodate this change.
+@end itemize
+
+@item
+Documentation: simplified (refactored) the notes in index.html#rom
+@item
+'build' script: removed the parts that generated libreboot_bin and added them to a new script: 'build-release'
+@itemize
+@item
+Documentation: index.html#build updated to reflect the above.
+@end itemize
+
+@item
+Removed 'sudo' from builddeb, builddeb-flashrom, powertop.trisquel6 and builddeb-bucts scripts (assuming that the user has it is a really bad idea).
+@item
+@textstrikeout{Added all gcry_* modules to grub (luks/cryptomount): gcry_arcfour gcry_camellia gcry_crc gcry_dsa gcry_md4 gcry_rfc2268 gcry_rmd160 gcry_seed gcry_sha1 gcry_sha512 gcry_twofish gcry_blowfish gcry_cast5 gcry_des gcry_idea gcry_md5 gcry_rijndael gcry_rsa gcry_serpent gcry_sha256 gcry_tiger gcry_whirlpool}
+@item
+Added GNUtoo's list of GRUB modules (includes all of the gcry_* modules above), cryptomount should be working now.
+@item
+Removed builddeb-bucts and builddeb-flashrom, merged them with builddeb (index.html updated accordingly)
+@item
+Removed buildpac-bucts and buildpac-flashrom, merged them with buildpac (index.html updated accordingly)
+@item
+Renamed builddeb to deps-trisquel (index.html updated accordingly)
+@item
+Renamed buildpac to deps-parabola (index.html updated accordingly)
+@item
+Documentation: removed all parts talking about build dependencies, replaced them with links to index.html#build_dependencies
+@item
+Documentation: emphasized more strongly on the documentation, the need to re-build bucts and/or flashrom before flashing a ROM image.
+@item
+build-release: flashrom, nvramtool, cbfstool and bucts are no longer provided pre-compiled in binary archives, and are now in source form only. (to maximize distro compatibility).
+@item
+Documentation: added gnulinux/encrypted_trisquel.html showing how to setup a fully encrypted Trisquel installation (including /boot) and boot it from the GRUB payload.
+@item
+'build' script: replaced grub.elf assembly instructons, it is now handled by a utility added under resources/utilities/grub-assemble
+@item
+Moved resources/grub/keymap to resources/utilities/grub-assemble/keymap, and updated that utility to use it
+@item
+Documentation: removed useless links to pictures of keyboard layouts and unmodified layouts.
+@item
+Removed all unused fonts from dejavu-fonts-ttf-2.34/ directory
+@item
+'buildrom-withgrub' script: updated it to create 2 sets of ROMs for each system: one with text-mode, one with coreboot framebuffer.
+@item
+Documentation: updated index.html#rom to reflect the above
+@item
+Deleted unused README and COPYING file from main directory
+@item
+Removed some rm -Rf .git* instructions from the get* scripts and moved them to build-release script
+@item
+Split up default grub.cfg into 6 parts: extra/@{common.cfg,txtmode.cfg,vesafb.cfg@} and menuentries/@{common.cfg,txtmode.cfg,vesafb.cfg@}
+@itemize
+@item
+buildrom-withgrub script uses these to generate the correct grub.cfg for each type of configuration.
+@end itemize
+
+@item
+grub_memdisk.cfg (used inside grub.elf) now only loads grub.cfg from cbfs. It no longer enables serial output or sets prefix. (menuentries/common.cfg does instead)
+@item
+resources/grub/config/extra/common.cfg, added:
+@itemize
+@item
+insmod instructions to load those modules: nativedisk, ehci, ohci, uhci, usb, usbserial_pl2303, usbserial_ftdi, usbserial_usbdebug
+@item
+set prefix=(memdisk)/boot/grub
+@item
+For native graphics (recommended by coreboot wiki):@* gfxpayload=keep@* terminal_output --append gfxterm
+@item
+Play a beep on startup:@* play 480 440 1
+@end itemize
+
+@item
+Documentation: added note about 'fb=false' workaround for text-mode debian-installer (Trisquel net install) to gnulinux/grub_boot_installer.html
+@item
+Documentation: updated gnulinux/grub_cbfs.html to make it safer (and easier) to follow.
+@end itemize
+
+@node Corrections to r20140811 5th beta 11th August 2014
+@section Corrections to r20140811 (5th beta) (11th August 2014)
+@anchor{#corrections-to-r20140811-5th-beta-11th-august-2014}
+@itemize
+@item
+Fixed typo where revision list for 5th beta was listed as March 11th 2014, when in fact it was August 11th 2014
+@item
+Fixed incorrect grub.cfg that was actually placed in resources/grub/config/x60/grub_usqwerty.cfg which broke the default GRUB menu entry on X60
+@end itemize
+
+@node Revisions for r20140811 5th beta 11th August 2014
+@section Revisions for r20140811 (5th beta) (11th August 2014)
+@anchor{#revisions-for-r20140811-5th-beta-11th-august-2014}
+@itemize
+@item
+build: added 'luks', 'lvm', 'cmosdump' and 'cmostest' to the list of modules for grub.elf
+@item
+Documentation: added pics showing T60 unbricking (still need to write a tutorial)
+@item
+build: include cmos.layout (coreboot/src/mainboard/manufacturer/model/cmos.layout) files in libreboot_bin
+@item
+Documentation: added @strong{install/x60tablet_unbrick.html}
+@item
+Documentation: added @strong{install/t60_unbrick.html}
+@item
+Documentation: added @strong{install/t60_lcd_15.html}
+@item
+Documentation: added @strong{install/t60_security.html}
+@item
+Documentation: added @strong{install/t60_heatsink.html}
+@item
+Documentation: Renamed RELEASE.html to release.html
+@item
+Documentation: removed pcmcia reference in x60_security.html (it's cardbus)
+@item
+Documentation: added preliminary information about randomized seal (for physical intrusion detection) in x60_security.html and t60_security.html
+@item
+Documentation: added preliminary information about preventing/mitigating cold-boot attack in x60_security.html and t60_security.html
+@item
+Documentation: added info to index.html#macbook21 warning about issues with macbook21
+@item
+Documentation: X60/T60: added information about checking custom ROMs using dd to see whether or not the top 64K region is duplicated below top or not. Advise caution about this in the tutorial that deals with flashing on top of Lenovo BIOS, citing the correct dd commands necessary if it is confirmed that the ROM has not been applied with dd yet. (in the case that the user compiled their own ROMs from libreboot, without using the build scripts, or if they forgot to use dd, etc).
+@item
+Split resources/libreboot/patch/gitdiff into separate patch files (getcb script updated to accomodate this change).
+@item
+Re-added .git files to bucts
+@item
+Fixed the oversight where macbook21_firstflash wasn't included in binary archives
+@item
+Release archives are now compressed using .tar.xz for better compression
+@end itemize
+
+@node Revisions for r20140729 4th beta 29th July 2014
+@section Revisions for r20140729 (4th beta) (29th July 2014)
+@anchor{#revisions-for-r20140729-4th-beta-29th-july-2014}
+@itemize
+@item
+Documentation: improved (more explanations, background info) in security/x60_security.html (courtesy of Denis Carikli)
+@item
+MacBook2,1 tested (confirmed)
+@item
+macbook21: Added script 'macbook21_firstflash' for flashing libreboot while Apple EFI firmware is running.
+@item
+Documentation: macbook21: added software-based flashing instructions for flashing libreboot while Apple EFI firmware is running.
+@item
+Reduced size of libreboot_src.tar.gz:
+@itemize
+@item
+Removed .git and .gitignore from grub directory (libreboot_src); not needed. Removing them reduces the size of the archive (by a lot). GRUB development should be upstream.
+@item
+Removed .git and .gitignore from bucts directory (libreboot_src); not needed. Removing them reduces the size of the archive. bucts development should be upstream.
+@item
+Removed .svn from flashrom directory (libreboot_src); not needed. Removing it reduces the size of the archive. flashrom development should be upstream.
+@end itemize
+
+@item
+Added ROMs with Qwerty (Italian) layout in GRUB (libreboot*itqwerty.rom)
+@item
+Added resources/utilities/i945gpu/intel-regs.py for debugging issues related to LCD panel compatibility on X60 Tablet and T60. (courtesy of @uref{http://mtjm.eu,Michał Masłowski})
+@end itemize
+
+@node Revisions for r20140720 3rd beta 20th July 2014
+@section Revisions for r20140720 (3rd beta) (20th July 2014)
+@anchor{#revisions-for-r20140720-3rd-beta-20th-july-2014}
+@itemize
+@item
+Fixed typo that existed in 2nd beta where the release date of the 2nd beta was listed as being in year 2016, when in actual fact it was 2014.
+@item
+Documentation: added (preliminary) details about (rare) buggy CPUs on the ThinkPad T60 that were found to fail (instability, kernel panics, etc) without the microcode updates.
+@item
+Documentation: added hardware/x60_heatsink.html for showing how to change the heatsink on the Thinkpad X60
+@item
+Added ROM images for Azerty (French) keyboard layout in GRUB (courtesy of Olivier Mondoloni)
+@item
+Tidied up some scripts:
+@itemize
+@item
+@textstrikeout{Re-factored those scripts (made easier to read/maintain): build-x60, build-x60t, build-t60, build-macbook21}
+@item
+@textstrikeout{Reduced the number of grub configs to 2 (or 1, for macbook21), the build scripts now generate the other configs at build time.}
+@item
+Deleted build-x60, build-x60t, build-t60, build-macbook21 and replaced with intelligent (generic) buildrom-withgrub script
+@item
+Updated build to use buildrom-withgrub script for building the ROM images.
+@item
+coreboot.rom and coreboot_serial.rom renamed to coreboot_usqwerty.rom and coreboot_serial_usqwerty.rom
+@item
+coreboot_dvorak and coreboot_serial_dvorak.rom renamed to coreboot_usdvorak.rom and coreboot_serial_usdvorak.rom
+@item
+Renamed coreboot*rom to libreboot*rom
+@item
+Made flash, lenovobios_firstflash and lenovobios_secondflash scripts fail if the specified file does not exist.
+@item
+Updated all relevant parts of the documentation to reflect the above.
+@end itemize
+
+@item
+Replaced background.png with background.jpg. added gnulove.jpg. (resources/grub/background/)
+@item
+Updated buildrom-withgrub to use background.jpg instead of background.png
+@item
+Updated buildrom-withgrub to use gnulove.jpg aswell
+@item
+Updated resources/grub/config/macbook21/grub*cfg to use gnulove.jpg background.
+@item
+Updated resources/grub/config/@{x60,t60,x60t@}/grub*cfg to use background.jpg background.
+@item
+Documentation: updated index.html#grub_custom_keyboard to be more generally useful.
+@item
+nvramtool:
+@itemize
+@item
+Updated builddeps-coreboot script to build it
+@item
+Updated build script to include it in libreboot_bin
+@end itemize
+
+@item
+Documentation: added security/x60_security.html (security hardening for X60)
+@end itemize
+
+@node Revisions for r20140716 2nd beta 16th July 2014
+@section Revisions for r20140716 (2nd beta) (16th July 2014)
+@anchor{#revisions-for-r20140716-2nd-beta-16th-july-2014}
+@itemize
+@item
+Deleted all git-related files from the coreboot directory. This was necessary because with those it is possible to run 'git diff' which shows the changes made in the form of a patch (diff format); this includes the blobs that were deleted during deblobbing.
+@end itemize
+
+@node Revisions for r20140711 1st beta 11th July 2014
+@section Revisions for r20140711 (1st beta) (11th July 2014)
+@anchor{#revisions-for-r20140711-1st-beta-11th-july-2014}
+@itemize
+@item
+Initial release (new coreboot base, dated 1st June 2014. See 'getcb' script for reference)
+@item
+DEBLOBBED coreboot
+@item
+Removed the part from memtest86+ 'make' where it tried to connect to some scp server while compiling. (commented out line 24 in the Makefile)
+@item
+X60 now uses a single .config (for coreboot)
+@item
+X60 now uses a single grub.cfg (for grub memdisk)
+@item
+X60 now uses a single grub.elf (payload)
+@item
+Added new native graphics code for X60 (replaces the old 'replay' code) from Vladimir Serbinenko: 5320/9 from review.coreboot.org
+@item
+T60 is now supported, with native graphics. (5345/4 from review.coreboot.org, cherry-picked on top of 5320/9 checkout)
+@item
+Added macbook2,1 support (from Mono Moosbart and Vladimir Serbinenko) from review.coreboot.org (see 'getcb' script to know how that was done)
+@itemize
+@item
+Documentation: added information linking to correct page and talking about which models are supported.
+@item
+Added resources/libreboot/config/macbook21config
+@item
+macbook21: Added 'build-macbook21' script and linked to it in 'build' (ROMs included under bin/macbook21/)
+@item
+macbook21: Removed dd instructions from build-macbook21 script (macbook21 does not need bucts when flashing libreboot while Apple EFI firmware is running)
+@item
+Documentation: Added macbook21 ROMs to the list of ROMs in index.html#rom
+@item
+Documentation: Write documentation linking to Mono Moosbart's macbook21 and parabola page (and include a copy)
+@end itemize
+
+@item
+Documentation: added a copy of Mono's Parabola install guide (for macbook21 with Apple EFI firmware) and linked in in main index.
+@item
+Documentation: added a copy of Mono's Coreboot page (for macbook21) and linked it in main index.
+@item
+T60: Copy CD option from the grub.cfg files for T60 *serial*.rom images into the grub configs for non-serial images. (T60s have CD/DVD drive on main laptop)
+@item
+macbook21: remove options in build-macbook21 for *serial*.rom (there is no dock or serial port available for macbook21)
+@item
+Added patches for backlight controls on X60 and T60 with help from Denis Carikli (see ./resources/libreboot/patch/gitdiff and ./getcb and i945_backlight.html)
+@itemize
+@item
+Documentation: added i945_backlight.html showing how backlight controls were made to work on X60/T60
+@end itemize
+
+@item
+Documentation: Added info about getting LCD panel name based on EDID data.
+@itemize
+@item
+Documentation: Added a link to this from the list of supported T60s and LCD panels for T60 (so that the user can check what LCD panel they have).
+@end itemize
+
+@item
+X60/T60: Merged patches for 3D fix (from Paul Menzel) when using kernel 3.12 or higher (see ./resources/libreboot/patch/gitdiff and ./getcb)
+@itemize
+@item
+based on 5927/11 and 5932/5 from review.coreboot.org
+@end itemize
+
+@item
+Improved thinkpad_acpi support (from coreboot ): xsensors shows more information.
+@itemize
+@item
+From 4650/29 in review.coreboot.org (merged in coreboot 'master' on June 1st 2014)
+@end itemize
+
+@item
+Merged changes for digitizer (X60 Tablet) and IR (X60 and T60) based on 5243/17, 5242/17 and 5239/19 from review.coreboot.org
+@itemize
+@item
+(see ./resources/libreboot/patch/gitdiff and ./getcb)
+@end itemize
+
+@item
+Documentation: added information about building flashrom using 'builddeps-flashrom' script.
+@item
+Re-created resources/libreboot/config/x60config
+@item
+Re-created resources/libreboot/config/t60config
+@item
+Added 'x60tconfig' in resources/libreboot/config (because X60 Tablet has different information about serial/model/version in 'dmidecode')
+@itemize
+@item
+Added 'build-x60t' script
+@item
+Updated 'build' script to use 'build-x60t'
+@item
+Documentation: added to #config section the section #config_x60t (libreboot configuration and dmidecode info)
+@item
+Documentation: added x60t ROMs to the list of ROMs
+@end itemize
+
+@item
+Tidied up the 'builddeps' script (easier to read)
+@item
+Tidied up the 'cleandeps' script (easier to read)
+@item
+Annotated the 'buildall' script
+@item
+Added 'getcb' script for getting coreboot revision used from git, and patching it.
+@item
+Added 'getgrub' script for getting the GRUB revision used from git, and patching it.
+@item
+Added 'getmt86' script for getting the memtest86+ version used, and patching it.
+@item
+Added 'getbucts' script for getting the bucts version used.
+@item
+Added 'getflashrom' script for getting the flashrom version used, and patching it
+@item
+Added 'getall' script which runs all of the other 'get' scripts.
+@item
+Add instructions to the 'build' script to prepare libreboot_meta.tar.gz
+@itemize
+@item
+New archive: libreboot_meta.tar.gz - minimal archive, using the 'get' scripts to download all the dependencies (coreboot, memtest, grub and so on).
+@end itemize
+
+@item
+Documentation: added information about where 'build' script prepares the libreboot_meta.tar.gz archive.
+@item
+Documentation: added information about how to use the 'get' scripts in libreboot_meta.tar.gz (to generate libreboot_src.tar.gz)
+@itemize
+@item
+Documentation: mention that meta doesn't create libreboot_src/ directory, but that libreboot_meta itself becomes the same.
+@item
+Documentation: advise to rename libreboot_meta to libreboot_src after running 'getall'.
+@end itemize
+
+@item
+Annotated the 'builddeb' script, to say what each set of dependencies are for.
+@item
+Separated bucts/flashrom builddeb sections into separate scripts: builddeb-flashrom, builddeb-bucts.
+@item
+Documentation: Updated relevant parts based on the above.
+@item
+Added instructions to 'build' script for including builddeb-bucts and builddeb-flashrom in libreboot_bin
+@item
+Updated flashrom checkout (r1822 2014-06-16) from SVN (http://flashrom.org/Downloads).
+@itemize
+@item
+Updated flashing instructions in index.html for new commands needed (Macronix chip on X60/T60)
+@item
+For X60/T60 (flashrom): Patched flashchips.c_lenovobios_macronix and flashchips.c_lenovobios_sst executables for SST/macronix (included in resources/flashrom/patch)
+@item
+Updated builddeps to build flashrom_lenovobios_sst and flashrom_lenovobios_macronix, for X60/T60 users with Lenovo BIOS
+@item
+moved the flashrom build instructions from 'builddeps' and put them in 'builddeps-flashrom', excecuting that from 'builddeps'.
+@item
+Added builddeps-flashrom to libreboot_bin.tar.gz
+@end itemize
+
+@item
+flashrom: added patched flashchips.c to resources/flashrom/patch (automatically use correct macronix chip on libreboot, without using '-c' switch)
+@itemize
+@item
+removed 'MX25L1605' and 'MX25L1605A/MX25L1606E' entries in flashchips.c for the patched version of flashchips.c
+@item
+added instructions to 'builddeps-flashrom' to automatically use this modified flashchips.c in the default build
+@end itemize
+
+@item
+Added builddeb to libreboot_bin.tar.gz
+@item
+Moved 'bucts' build instructions from builddeps to builddeps-bucts
+@itemize
+@item
+builddeps now runs 'builddeps-bucts' instead
+@item
+Added 'builddeps-bucts' to libreboot_bin.tar.gz
+@item
+Documentation: Added information about using 'builddep-bucts' to build the BUC.TS utility.
+@end itemize
+
+@item
+Added 'lenovobios_firstflash' and 'lenovobios_secondflash' scripts
+@itemize
+@item
+Added instructions to 'build' script for including those files in libreboot_bin
+@item
+Documentation: Add tutorial for flashing while Lenovo BIOS is running (on X60/T60)
+@end itemize
+
+@item
+Added 'flash' script (make sure to run builddeps-flashrom first) which (while libreboot is already running) can use flashrom to flash a ROM
+@itemize
+@item
+eg: "sudo ./flash bin/x60/coreboot_serial_ukdvorak.rom" equivalent to "sudo ./flashrom/flashrom -p internal -w bin/x60/coreboot_uk_dvorak.rom"
+@item
+updated 'build' script to include the 'flash' script in libreboot_bin.tar.gz
+@end itemize
+
+@item
+Documentation: replaced default flashrom tutorial to recommend the 'flash' script instead.
+@item
+Re-add cbfstool source code back into libreboot_bin.tar.gz, as cbfstool_standalone
+@itemize
+@item
+Patched that version to work (able to be built and used) without requiring the entire coreboot source code.
+@item
+Created patched version of the relevant source files and added it into resources/cbfstool/patch
+@itemize
+@item
+see coreboot/util/cbfstool/rmodule.c and then the patched version in resources/cbfstool/patch/rmodule.c
+@item
+see coreboot/src/include/rmodule-defs.h and the rule in 'build' for including this in ../libreboot_bin/cbfstool_standalone
+@end itemize
+
+@item
+Added instructions to 'build' script for applying this patch to the cbfstool_standalone source in libreboot_bin
+@item
+Added instructions to 'build' script for then re-compiling cbfstool_standalone in libreboot_bin after applying the patch
+@item
+Added a 'builddeps-cbfstool' script (in src, but only used in bin and put in bin by 'build') that compiles cbfstool_standalone in libreboot_bin (make), moves the cbfstool and rmodtool binaries into libreboot_bin/ and then does 'make clean' in libreboot_bin/cbfstool_standalone
+@item
+Updated the 'build' script to put 'builddeps-cbfstool' in libreboot_bin
+@item
+Updated the 'build' script in the cbfstool (standalone) part to accomodate the above.
+@item
+Documentation: added notes about cbfstool (standalone) in libreboot_bin
+@end itemize
+
+@item
+Documentation: made gnulinux/grub_cbfs.html slightly easier to follow.
+@item
+Annotate the 'build*' scripts with 'echo' commands, to help the user understand what it actually happening during the build process.
+@item
+Documentation: added information about how 'dmidecode' data was put in the coreboot configs
+@itemize
+@item
+Documentation: In fact, document how the 'config' files in resources/libreboot/config/ were created
+@end itemize
+
+@item
+Documentation: Added information about which ThinkPad T60s are supported, and which are not.
+@item
+Documentation: added information about LCD inverters (for upgrading the LCD panel on a T60 14.1' XGA or 15.1' XGA)
+@itemize
+@item
+it's FRU P/N 41W1478 (on T60 14.1") so this was added to the docs.
+@item
+it's P/N 42T0078 FRU 42T0079 or P/N 41W1338 (on T60 15.1") so this was added to the docs.
+@end itemize
+
+@item
+Documentation: added information about names of LCD panels for T60 to the relevant parts of the documentation.
+@item
+Documentation: added information (with pictures) about the differences between T60 with Intel GPU and T60 with ATI GPU.
+@item
+Documentation: added pictures of keyboard layouts (US/UK Qwerty/Dvorak) to the ROM list, to let the user compare with their own keyboard.
+@item
+Move the coreboot build instructions in 'builddeps' into 'builddeps-coreboot' and link it in 'builddeps'
+@itemize
+@item
+Link to 'builddeps-coreboot' in final stage of 'getcb'
+@end itemize
+
+@item
+Move GRUB build instructions from 'builddeps' into 'builddeps-grub', link from 'builddeps'
+@itemize
+@item
+Link to 'builddeps-grub' in final stage of 'getgrub'
+@end itemize
+
+@item
+Move MemTest86+ build instructions from 'builddeps' into 'builddeps-memtest86', link from 'builddeps'
+@itemize
+@item
+Link to 'builddeps-memtest86' in final stage of 'getmt86'
+@end itemize
+
+@item
+made 'build' script put resources/ directory in libreboot_bin, to make builddeps-flashrom work in libreboot_bin
+@item
+Removed instructions for building source code in the 'get' script (they don't really belong there)
+@item
+Added libfuse-dev and liblzma-dev to the list of GRUB dependencies in 'builddeb' script.
+@item
+Converted the 'RELEASE' file to 'RELEASE.html'
+@item
+Added those dependencies to builddeb script (for GRUB part): gawk libdevmapper-dev libtool libfreetype6-dev
+@item
+Added to build script the instruction at the end to create a sha512sum.txt with a file manifest plus checksums.
+@item
+Deleted the RELEASE and BACKPORT files (no longer needed)
+@item
+Documentation: added information about X60/T60 dock (ultrabase x6 and advanced mini dock) to relevant sections.
+@itemize
+@item
+Added to index.html#serial
+@end itemize
+
+@end itemize
+
+@ref{#pagetop,Back to top of page.}
+
+@node Release 20140622 5th release
+@chapter Release 20140622 (5th release)
+@anchor{#release-20140622-5th-release}
+@itemize
+@item
+7th March 2014
+@item
+revised 22nd June 2014
+@end itemize
+
+@menu
+* Officially supported::
+* Revision 22nd June 2014 - extra::
+* Revision 22nd June 2014 - extra::
+* Revision notes 22nd June 2014::
+* Revision notes 11th June 2014::
+* Revision notes 5th June 2014::
+* Revision notes 9th March 2015::
+* Development notes::
+@end menu
+
+@node Officially supported
+@section Officially supported
+@anchor{#officially-supported}
+@itemize
+@item
+ThinkPad X60
+@item
+ThinkPad X60s
+@end itemize
+
+@node Revision 22nd June 2014 - extra
+@section Revision (22nd June 2014 - extra)
+@anchor{#revision-22nd-june-2014---extra}
+@itemize
+@item
+Documentation: added X60 Unbricking tutorial
+@item
+Documentation: added info about enabling or disabling wifi
+@item
+Documentation: added info about enabling or disabling trackpoint
+@end itemize
+
+@node Revision 22nd June 2014 - extra
+@section Revision (22nd June 2014 - extra)
+@anchor{#revision-22nd-june-2014---extra-1}
+@itemize
+@item
+Documentation: Improved the instructions for using flashrom
+@item
+Documentation: Improved the instructions for using cbfstool (to change the default GRUB menu)
+@item
+Documentation: Numerous small fixes.
+@end itemize
+
+@node Revision notes 22nd June 2014
+@section Revision notes (22nd June 2014)
+@anchor{#revision-notes-22nd-june-2014}
+@itemize
+@item
+updated GRUB (git 4b8b9135f1676924a8458da528d264bbc7bbb301, 20th April 2014)
+@item
+Made "DeJavu Sans Mono" the default font in GRUB (fixes border corruption).
+@item
+re-added background image in GRUB (meditating GNU)
+@item
+added 6 more images:
+@itemize
+@item
+coreboot_ukqwerty.rom (UK Qwerty keyboard layout in GRUB)
+@item
+coreboot_serial_ukqwerty.rom (UK Qwerty keyboard layout in GRUB)
+@item
+coreboot_dvorak.rom (US Dvorak keyboard layout in GRUB)
+@item
+coreboot_serial_dvorak.rom (US Dvorak keyboard layout in GRUB)
+@item
+coreboot_ukdvorak.rom (UK Dvorak keyboard layout in GRUB)
+@item
+coreboot_serial_ukdvorak.rom (UK Dvorak keyboard layout in GRUB)
+@item
+(coreboot.rom and coreboot_serial.rom have US Qwerty keyboard layout in GRUB, as usual)
+@end itemize
+
+@item
+improved the documentation:
+@itemize
+@item
+removed FLASH_INSTRUCTION and README.powertop and merged them with README
+@item
+removed obsolete info from README and tidied it up
+@item
+deleted README (replaced with index.html)
+@end itemize
+
+@item
+tidied up the menu entries in GRUB
+@item
+tidied up the root directory of X60_source/, sorted more files into subdirectories
+@item
+added 'pkg-config' to the list of dependencies for building powertop on Trisquel
+@item
+wrote a script (powertop.trisquel6) to automatically setup Powertop to run at boot time (for Trisquel 6 users)
+@item
+improved the commenting inside the 'build' script (should make modifying it easier)
+@item
+Renamed X60_binary.tar.gz and X60_source.tar.gz to libreboot_bin.tar.gz and libreboot_src.tar.gz, respectively.
+@item
+Replaced "GNU GRUB version" with "FREE AS IN FREEDOM" on GNU GRUB start screen.
+@item
+Added sha512.txt files in libreboot_src and libreboot_bin. (inside the archives)
+@item
+Added libreboot_bin.tar.gz.sha512.txt and libreboot_src.tar.gz.sha512.txt files (outside of the archives)
+@end itemize
+
+@node Revision notes 11th June 2014
+@section Revision notes (11th June 2014):
+@anchor{#revision-notes-11th-june-2014}
+@itemize
+@item
+removed 'CD' boot option from coreboot.rom (not needed)
+@item
+removed 'processor.max_cstate=2' and 'idle=halt' options (see README.powertop file)
+@end itemize
+
+@node Revision notes 5th June 2014
+@section Revision notes (5th June 2014):
+@anchor{#revision-notes-5th-june-2014}
+@itemize
+@item
+added backlight support (Fn+Home and Fn+End) on X60
+@item
+fixed broken/unstable 3D when using kernel 3.12 or higher
+@item
+(see 'BACKPORT' file)
+@end itemize
+
+@node Revision notes 9th March 2015
+@section Revision notes (9th March 2015):
+@anchor{#revision-notes-9th-march-2015}
+@itemize
+@item
+recreated coreboot config from scratch
+@item
+GRUB loads even faster now (less than 2 seconds).
+@item
+Total boot time reduced by further ~5 seconds.
+@item
+Added crypto and cryptodisk modules to GRUB
+@item
+cbfstool now included in the binary archives
+@end itemize
+
+@node Development notes
+@section Development notes
+@anchor{#development-notes}
+@itemize
+@item
+Binary archive now have 2 images:
+@itemize
+@item
+With serial output enabled and memtest86+ included (debug level 8 in coreboot)
+@item
+With serial output disabled and memtest86+ excluded (faster boot speeds) (debugging disabled)
+@end itemize
+
+@item
+Reduced impact on battery life:
+@itemize
+@item
+'processor.max_cstate=2' instead of 'idle=halt' for booting default kernel
+@end itemize
+
+@item
+coreboot.rom (faster boot speeds, debugging disabled):
+@itemize
+@item
+Disabled coreboot serial output (Console-> in "make menuconfig")
+@item
+Set coreboot debug level to 0 instead of 8 (Console-> in "make menuconfig")
+@item
+Changed GRUB timeout to 1 second instead of 2 (in grub.cfg
+@item
+Removed background image in GRUB.
+@item
+Removed memtest86+ payload (since it relies on serial output)
+@end itemize
+
+@item
+coreboot_serial.rom (slower boot speeds, debugging enabled):
+@itemize
+@item
+Boot time still reduced, but only by ~2 seconds
+@item
+has the memtest86+ payload included in the ROM
+@item
+has serial port enabled. How this is achieved (from X60_source): Turn on debugging level to 8, and enable serial output
+@end itemize
+
+@item
+(in Console-> in coreboot "make menuconfig")
+@item
+(and build with grub_serial.cfg and grub_memdisk_serial.cfg)
+@end itemize
+
+@ref{#pagetop,Back to top of page.}
+
+@node Release 20140221 4th release
+@chapter Release 20140221 (4th release)
+@anchor{#release-20140221-4th-release}
+@itemize
+@item
+21st February 2014
+@end itemize
+
+@menu
+* Officially supported::
+* Development notes::
+@end menu
+
+@node Officially supported
+@section Officially supported
+@anchor{#officially-supported-1}
+@itemize
+@item
+ThinkPad X60
+@item
+ThinkPad X60s
+@end itemize
+
+@node Development notes
+@section Development notes
+@anchor{#development-notes-1}
+@itemize
+@item
+Removed SeaBIOS (redundant)
+@item
+New GRUB version (2.02~beta2)
+@itemize
+@item
+Fixes some USB issues
+@item
+Includes ISOLINUX/SYSLINUX parser
+@end itemize
+
+@item
+New grub.cfg
+@item
+Removed useless options:
+@itemize
+@item
+options for booting sda 2/3/4
+@item
+seabios boot option
+@end itemize
+
+@item
+Added new menu entries:
+@itemize
+@item
+Parse ISOLINUX config (USB)
+@item
+Parse ISOLINUX config (CD)
+@item
+Added 'cat' module for use on GRUB command line.
+@end itemize
+
+@item
+"set pager=1" is set in grub.cfg, for less-like functionality
+@end itemize
+
+The "Parse" options read ./isolinux/isolinux.cfg on a CD or USB, and automatically converts it to a grub config and switches to the boot menu of that distro. This makes booting ISOs *much* easier than before.
+
+@ref{#pagetop,Back to top of page.}
+
+@node r20131214 3rd release
+@chapter r20131214 (3rd release)
+@anchor{#r20131214-3rd-release}
+@itemize
+@item
+14th December 2013
+@end itemize
+
+@menu
+* Supported::
+* Development notes::
+@end menu
+
+@node Supported
+@section Supported:
+@anchor{#supported}
+@itemize
+@item
+ThinkPad X60
+@item
+ThinkPad X60s
+@end itemize
+
+@node Development notes
+@section Development notes
+@anchor{#development-notes-2}
+@itemize
+@item
+Added SeaBIOS payload to GRUB2 (for booting USB drives)
+@item
+new grub.cfg
+@end itemize
+
+@ref{#pagetop,Back to top of page.}
+
+@node r20131213 2nd release
+@chapter r20131213 (2nd release)
+@anchor{#r20131213-2nd-release}
+@itemize
+@item
+13th December 2013
+@end itemize
+
+@menu
+* Supported::
+* Development notes::
+@end menu
+
+@node Supported
+@section Supported:
+@anchor{#supported-1}
+@itemize
+@item
+ThinkPad X60
+@item
+ThinkPad X60s
+@end itemize
+
+@node Development notes
+@section Development notes
+@anchor{#development-notes-3}
+@itemize
+@item
+added background image to GRUB2
+@item
+added memtest86+ payload to grub2
+@item
+improvements to the documentation
+@item
+new grub.cfg
+@end itemize
+
+@ref{#pagetop,Back to top of page.}
+
+@node r20131212 1st release
+@chapter r20131212 (1st release)
+@anchor{#r20131212-1st-release}
+@itemize
+@item
+12th December 2013
+@end itemize
+
+@menu
+* Supported::
+* Development notes::
+@end menu
+
+@node Supported
+@section Supported:
+@anchor{#supported-2}
+@itemize
+@item
+ThinkPad X60
+@item
+ThinkPad X60s
+@end itemize
+
+@node Development notes
+@section Development notes
+@anchor{#development-notes-4}
+@itemize
+@item
+initial release
+@item
+source code deblobbed
+@end itemize
+
+@ref{#pagetop,Back to top of page.}
+
+Copyright © 2014, 2015 Francis Rowe <info@@gluglug.org.uk>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/depthcharge/index.texi b/docs/src/depthcharge/index.texi
new file mode 100644
index 0000000..5e9e3fc
--- /dev/null
+++ b/docs/src/depthcharge/index.texi
@@ -0,0 +1,213 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title Depthcharge payload
+@end titlepage
+
+@node Top
+@top Depthcharge payload
+
+@menu
+* Depthcharge payload::
+* CrOS security model::
+* Developer mode screen::
+* Recovery mode screen::
+* Configuring verified boot parameters::
+@end menu
+
+@node Depthcharge payload
+@chapter Depthcharge payload
+@anchor{#depthcharge-payload}
+This section relates to the depthcharge payload used in libreboot.
+
+Or @uref{../index.html,Back to main index}.
+
+@itemize
+@item
+@ref{#cros_security_model,CrOS security model}
+@item
+@ref{#developer_mode_screen,Developer mode screen}
+@itemize
+@item
+Holding the developer mode screen
+@item
+Booting normally
+@item
+Booting from different mediums
+@item
+Showing device information
+@item
+Warnings
+@end itemize
+
+@item
+@ref{#recovery_mode_screen,Recovery mode screen}
+@itemize
+@item
+@ref{#recovering_bad_state,Recovering from a bad state}
+@item
+@ref{#enabling_developer_mode,Enabling developer mode}
+@end itemize
+
+@item
+@ref{#configuring_verified_boot_parameters,Configuring verified boot parameters}
+@end itemize
+
+@node CrOS security model
+@chapter CrOS security model
+@anchor{#cros-security-model}
+CrOS (Chromium OS/Chrome OS) devices such as Chromebooks implement a strict security model to ensure that these devices do not become compromised, that is implemented as the verified boot (vboot) reference, most of which is executed within depthcharge. A detailed overview of the CrOS security model is available on the dedicated page.
+
+In spite of the CrOS security model, depthcharge won't allow booting kernels without verifying their signature and booting from external media or legacy payload unless explicitly allowed: see @ref{#configuring_verified_boot_parameters,configuring verified boot parameters}.
+
+@node Developer mode screen
+@chapter Developer mode screen
+@anchor{#developer-mode-screen}
+The developer mode screen can be accessed in depthcharge when developer mode is enabled.@* Developer mode can be enabled from the @ref{#recovery_mode_screen,recovery mode screen}.
+
+It allows booting normally, booting from internal storage, booting from external media (when enabled), booting from legacy payload (when enabled), showing information about the device and disabling developer mode.
+@menu
+* Holding the developer mode screen::
+* Booting normally::
+* Booting from different mediums::
+* Showing device information::
+* Warnings::
+@end menu
+
+@node Holding the developer mode screen
+@section Holding the developer mode screen
+@anchor{#holding-the-developer-mode-screen}
+As instructed on the developer mode screen, the screen can be held by pressing @strong{Ctrl + H} in the first 3 seconds after the screen is shown. After that delay, depthcharge will resume booting normally.
+
+@node Booting normally
+@section Booting normally
+@anchor{#booting-normally}
+As instructed on the developer mode screen, a regular boot will happen after @strong{3 seconds} (if developer mode screen is not held).@* The default boot medium (internal storage, external media, legacy payload) is shown on screen.
+
+@node Booting from different mediums
+@section Booting from different mediums
+@anchor{#booting-from-different-mediums}
+Depthcharge allows booting from different mediums, when they are allowed (see @ref{#configuring_verified_boot_parameters,configuring verified boot parameters} to enable or disable boot mediums).@* As instructed on the developer mode screen, booting from various mediums can be triggered by pressing various key combinations:
+
+@itemize
+@item
+Internal storage: @strong{Ctrl + D}
+@item
+External media: @strong{Ctrl + U} (when enabled)
+@item
+Legacy payload: @strong{Ctrl + L} (when enabled)
+@end itemize
+
+@node Showing device information
+@section Showing device information
+@anchor{#showing-device-information}
+As instructed on the developer mode screen, showing device information can be triggered by pressing @strong{Ctrl + I} or @strong{Tab}.@* Various information is shown, including vboot non-volatile data, TPM status, GBB flags and key hashes.@*
+
+@node Warnings
+@section Warnings
+@anchor{#warnings}
+The developer mode screen will show warnings when:
+
+@itemize
+@item
+Booting kernels without verifying their signature is enabled
+@item
+Booting from external media is enabled
+@item
+Booting legacy payloads is enabled
+@end itemize
+
+@node Recovery mode screen
+@chapter Recovery mode screen
+@anchor{#recovery-mode-screen}
+The recovery mode screen can be accessed in depthcharge, by pressing @strong{Escape + Refresh + Power} when the device is off.
+
+It allows recovering the device from a bad state by booting from a trusted recovery media. When accessed with the device in a good state, it also allows enabling developer mode.
+@menu
+* Recovering from a bad state::
+* Enabling developer mode::
+@end menu
+
+@node Recovering from a bad state
+@section Recovering from a bad state
+@anchor{#recovering-from-a-bad-state}
+When the device fails to verify the signature of a piece of the boot software or when an error occurs, it is considered to be in a bad state and will instruct the user to reboot to recovery mode.@* Recovery mode boots using only software located in write-protected memory, that is considered to be trusted and safe.
+
+Recovery mode then allows recovering the device by booting from a trusted recovery media, that is automatically detected when recovery mode starts. When no external media is found or when the recovery media is invalid, instructions are shown on screen. @* Trusted recovery media are external media (USB drives, SD cards, etc) that hold a kernel signed with the recovery key.
+
+Google provides images of such recovery media for Chrome OS (which are not advised to users as they contain proprietary software). @* They are signed with Google's recovery keys, that are pre-installed on the device when it ships.
+
+When replacing the full flash of the device, the pre-installed keys are replaced. When the recovery private key is available (e.g. when using self-generated keys), it can be used to sign a kernel for recovery purposes.
+
+@node Enabling developer mode
+@section Enabling developer mode
+@anchor{#enabling-developer-mode}
+As instructed on the recovery mode screen, developer mode can be enabled by pressing @strong{Ctrl + D}.@* Instructions to confirm enabling developer mode are then shown on screen.
+
+@node Configuring verified boot parameters
+@chapter Configuring verified boot parameters
+@anchor{#configuring-verified-boot-parameters}
+Depthcharge's behavior relies on the verified boot (vboot) reference implementation, that can be configured with parameters stored in the verified boot non-volatile storage.@* These parameters can be modified with the @strong{crossystem} tool, that requires sufficient privileges to access the verified boot non-volatile storage.
+
+@strong{crossystem} relies on @strong{mosys}, that is used to access the verified boot non-volatile storage on some devices. @strong{crossystem} and @strong{mosys} are both free software and their source code is made available by Google: @uref{https://chromium.googlesource.com/chromiumos/platform/vboot_reference/,crossystem}. @uref{https://chromium.googlesource.com/chromiumos/platform/mosys/,mosys}.@* These tools are not distributed along with Libreboot yet. However, they are preinstalled on the device, with ChromeOS.
+
+Some of these parameters have the potential of @strong{weakening the security of the device}. In particular, disabling kernels signature verification, external media boot and legacy payload boot can weaken the security of the device.
+
+The following parameters can be configured:
+
+@itemize
+@item
+Kernels signature verification:
+@itemize
+@item
+Enabled with:@* # @strong{crossystem dev_boot_signed_only=1}
+@item
+Disabled with:@* # @strong{crossystem dev_boot_signed_only=0}
+@end itemize
+
+@item
+External media boot:
+@itemize
+@item
+Enabled with:@* # @strong{crossystem dev_boot_usb=1}
+@item
+Disabled with:@* # @strong{crossystem dev_boot_usb=0}
+@end itemize
+
+@item
+Legacy payload boot:
+@itemize
+@item
+Enabled with:@* # @strong{crossystem dev_boot_legacy=1}
+@item
+Disabled with:@* # @strong{crossystem dev_boot_legacy=0}
+@end itemize
+
+@item
+Default boot medium:
+@itemize
+@item
+Internal storage:@* # @strong{crossystem dev_default_boot=disk}
+@item
+External media:@* # @strong{crossystem dev_default_boot=usb}
+@item
+Legacy payload:@* # @strong{crossystem dev_default_boot=legacy}
+@end itemize
+
+@end itemize
+
+Copyright © 2015 Paul Kocialkowski <contact@@paulk.fr>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/future/index.texi b/docs/src/future/index.texi
new file mode 100644
index 0000000..abb93da
--- /dev/null
+++ b/docs/src/future/index.texi
@@ -0,0 +1,516 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title libreboot tutorials
+@end titlepage
+
+@node Top
+@top libreboot tutorials
+
+@menu
+* Development notes::
+* Table of contents::
+* standard test::
+* T60 cpu microcode::
+* i945 VRAM size::
+* LCD panels on i945 - fix incompatible panels::
+* i945 gfx X60/T60 VBT implementation experimental testing::
+* intelvbttool test results VGA ROM dumps::
+* Fallback patches::
+* Other - unlisted low priority::
+@end menu
+
+@node Development notes
+@chapter Development notes
+@anchor{#development-notes}
+These are development notes, for future use. For old (obselete) notes, see @uref{old.html,old.html}.
+
+Or go @uref{../tasks.html,back to main task list}.
+
+@node Table of contents
+@chapter Table of contents
+@anchor{#table-of-contents}
+@itemize
+@item
+@ref{#standard_test,Standard test}
+@item
+@ref{#t60_cpu_microcode,T60 cpu microcode}
+@item
+@ref{#i945_vram_size,i945 VRAM size}
+@item
+@ref{#lcd_i945_incompatibility,LCD panels on i945 - fix incompatible panels}
+@item
+@ref{#i945_vbt,i945 X60/T60 VBT implementation (experimental: testing)}
+@item
+@ref{#intelvbttool_results,IntelVbtTool results}
+@item
+@ref{#fallback_patches,Fallback patches for i945}
+@end itemize
+
+@node standard test
+@chapter standard test
+@anchor{#standard-test}
+These logs are usually obtained when testing changes related to graphics on i945 (X60 and T60).
+
+@itemize
+@item
+Make a copy of these files:
+@itemize
+@item
+/var/log/dmesg
+@item
+/var/log/kern.log
+@item
+/var/log/Xorg.0.log
+@item
+/proc/ioports
+@item
+/proc/iomem
+@item
+/sys/class/drm/card0/error
+@end itemize
+
+@item
+Record these outputs:
+@itemize
+@item
+sudo intel_reg_dumper
+@item
+uname -r
+@item
+lspci -vvvvnnnnxxxx
+@item
+sudo modprobe msr
+@item
+sudo inteltool -a
+@item
+sudo cbmem -c
+@end itemize
+
+@item
+Try some 3D games with latest kernel.
+@end itemize
+
+@ref{#pagetop,Back to top of page.}
+
+@node T60 cpu microcode
+@chapter T60 cpu microcode
+@anchor{#t60-cpu-microcode}
+TODO: T60: find (for rare buggy CPUs that are unstable without microcode updates) if there is a workaround (patched kernel, special parameter, etc) So far, only 1 processor has been found to have issues. See microcode errata sheets http://download.intel.com/design/mobile/SPECUPDT/31407918.pdf and http://download.intel.com/design/mobile/SPECUPDT/30922214.pdf and then look at the debugging results collected in @uref{../resources/images/t7200q,t7200q} directory (q means quirk).
+
+Every other T7200 tested so far has worked without microcode updates.
+
+@ref{#pagetop,Back to top of page.}
+
+@node i945 VRAM size
+@chapter i945 VRAM size
+@anchor{#i945-vram-size}
+Apparently, only 8MB VRAM is available on i945 GPUs (though it could do 64MB):@* phcoder: No. Hardware default is 8 MiB. When I wanted to make it configurable, I saw that docs mention only one other alternative: 1MiB. Later isn't event enough for 1024x768 at 24bpp without any acceleration or double buffering. It's possible that there are undocumented values. Which options do you have in vendor BIOS? How to find out how much vram you have:@* phcoder: TOM - BSM@* phcoder: check what vendor BIOS offers as options@* fchmmr: I thought it could do 64MB usually@* phcoder: not accorging to doc.@* phcoder: see mobile-945-express-chipset-datasheet page 93@* phcoder: see also src/northbridge/intel/i945/@{early_init,northbridge,gma@}.c@* fchmmr: "011 = DVMT (UMA) mode, 8 MB of memory pre-allocated for@* fchmmr: frame buffer."@* fchmmr: "Others - reserved"@* phcoder: the easiest way is a loop at this position which tries different values and reads (and prints) BSM with them@* stefanct: fchmmr: they suggest that you change the value and look how BSM reacts to that@* stefanct: as they pointed out earlier vram size = TOM - BSM@* stefanct: different values of GMS@* stefanct: phcoder: hm... this could be a hint. look at the text description of TOLUD at page 103@* stefanct: it mentions 64 MB in the text about BSM as well@* stefanct: table 18...@* phcoder: stefanct: I have a guess which value make is 64 but I will not tell to avoid skewing test results@* stefanct: phcoder: sure... i assumed you were not sure if it supports it at all. testing it properly is of course a good idea :)@* stefanct: test the various possible (but reserved) values of GMS and see what the resulting VRAM size is@* fchmmr: so, TOM - BSM
+
+@ref{#pagetop,Back to top of page.}
+
+@node LCD panels on i945 - fix incompatible panels
+@chapter LCD panels on i945 - fix incompatible panels
+@anchor{#lcd-panels-on-i945---fix-incompatible-panels}
+Fix T60 issues (see incompatible panels listed at @uref{../hcl/index.html#supported_t60_list,../hcl/index.html#supported_t60_list}).
+
+Run that tool (resources/utilities/i945gpu/intel-regs.py) as root on systems with the offending panels in:
+
+@itemize
+@item
+Coreboot (or libreboot, whatever) with VBIOS (disable native graphics also)
+@item
+(Factory BIOS also?)
+@end itemize
+
+This shows values in devicetree.cb and src/northbridge/intel/i945/gma.c, the idea is that you run it on factory bios or vbios and that it will (might) show different values: then you try those in the native graphics (in libreboot).
+
+Other values/registers might also need to be added to the script for these tests.
+
+check if intel_bios_reader from intel-gpu-tools reports the same value (BIOS has a hardcoded value) for PWM modulation frequency. This file can read the VBIOS (64K dump).
+
+Check other tools in intel-gpu-tools aswell, compare outputs. Possibly add more information to intel-regs.py output (submit changes to mtjm). Do oprom trace / replay (@uref{http://www.coreboot.org/User:GNUtoo#How_to_get_rid_of_the_vbios_of_the_x60_.5BNew_Version.5D,http://www.coreboot.org/User:GNUtoo#How_to_get_rid_of_the_vbios_of_the_x60_.5BNew_Version.5D})
+
+Study how EDID works and how gma.c handles it.
+
+Original getregs.py script can be found at @uref{http://hg.mtjm.eu/scripts/file/tip/intel-regs.py,http://hg.mtjm.eu/scripts/file/tip/intel-regs.py} written by Michał Masłowski.
+
+About fixing remaining LCD panels on 5345:@* 'polarity' is mentioned in coreboot log (cbmem -c). compare output (with working and non-working panel). (and see the other notes in future/index.html)
+
+There was a theory that working panels are 6bpc (bits per colour) and nonworking are 8bpc, but all EDIDs that we have here are for 6bpc panels.
+
+We should compare coreboot logs (from @code{cbmem -c} from systems with working and nonworking panels.
+
+How to dump EDID:
+
+# @strong{apt-get install i2c-tools}@* # @strong{modprobe i2c-dev}@* Find out the correct ID to use:@* # @strong{i2cdetect -l}@* Example:@* # @strong{i2cdump -y 2 0x50}
+
+Working panel: EDID dump from LG-Philips LP150E05-A2K1:
+
+@verbatim
+No size specified (using byte-data access)
+ 0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef
+00: XX ff ff ff ff ff ff 00 30 ae 43 40 00 00 00 00 X.......0?C@....
+10: 00 0f 01 03 80 1e 17 78 ea af 00 99 58 53 8c 2a .??????x??.?XS?*
+20: 25 50 54 21 08 00 81 80 01 01 01 01 01 01 01 01 %PT!?.??????????
+30: 01 01 01 01 01 01 30 2a 78 20 51 1a 10 40 30 70 ??????0*x Q??@0p
+40: 13 00 31 e4 10 00 00 18 28 23 78 20 51 1a 10 40 ?.1??..?(#x Q??@
+50: 30 70 13 00 31 e4 10 00 00 18 00 00 00 0f 00 90 0p?.1??..?...?.?
+60: 43 32 90 43 28 14 06 00 32 0c 00 00 00 00 00 fe C2?C(??.2?.....?
+70: 00 4c 50 31 35 30 45 30 35 2d 41 32 0a 20 00 9b .LP150E05-A2? .?
+80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
+90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
+a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
+b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
+c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
+d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
+e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
+f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
+@end verbatim
+
+Working panel: EDID dump from Boe-Hydis HT14P12-100 FRU: 13N7061 (Inverter FRU: 41W1010)
+
+@verbatim
+ 0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef
+00: 00 ff ff ff ff ff ff 00 30 ae 22 40 00 00 00 00 ........0?"@....
+10: 00 0f 01 03 80 1c 15 78 ea af 40 95 56 4a 8f 25 .??????x??@?VJ?%
+20: 20 50 54 21 08 00 81 80 01 01 01 01 01 01 01 01 PT!?.??????????
+30: 01 01 01 01 01 01 30 2a 78 20 51 1a 10 40 30 70 ??????0*x Q??@0p
+40: 13 00 1d d6 10 00 00 19 25 23 78 20 51 1a 10 40 ?.???..?%#x Q??@
+50: 30 70 13 00 1d d6 10 00 00 19 00 00 00 0f 00 90 0p?.???..?...?.?
+60: 43 32 90 43 28 0f 01 00 09 e5 00 00 00 00 00 fe C2?C(??.??.....?
+70: 00 48 54 31 34 50 31 32 2d 31 30 30 0a 20 00 3f .HT14P12-100? .?
+80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
+90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
+a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
+b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
+c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
+d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
+e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
+f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
+@end verbatim
+
+LTN141XA-L01: revert to libreboot git commit c943281 to see this
+
+@strong{Non-}working panel: EDID dump from Samsung LTN150XG-L08:
+
+@verbatim
+ 0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef
+00: 00 ff ff ff ff ff ff 00 30 ae 40 40 00 00 00 00 ........0?@@....
+10: 00 0f 01 03 80 1f 17 78 ea 2d 05 97 57 51 8a 27 .??????x?-??WQ?'
+20: 23 50 54 21 08 00 01 01 01 01 01 01 01 01 01 01 #PT!?.??????????
+30: 01 01 01 01 01 01 64 19 00 40 41 00 26 30 18 88 ??????d?.@A.&0??
+40: 36 00 30 e4 10 00 00 19 28 15 00 40 41 00 26 30 6.0??..?(?.@A.&0
+50: 18 88 36 00 30 e4 10 00 00 19 00 00 00 0f 00 61 ??6.0??..?...?.a
+60: 43 32 61 43 28 14 01 00 4c a3 58 47 00 00 00 fe C2aC(??.L?XG...?
+70: 00 4c 54 4e 31 35 30 58 47 2d 4c 30 38 0a 00 6d .LTN150XG-L08?.m
+80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
+90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
+a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
+b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
+c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
+d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
+e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
+f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
+@end verbatim
+
+@ref{#pagetop,Back to top of page.}
+
+@node i945 gfx X60/T60 VBT implementation experimental testing
+@chapter i945 gfx: X60/T60 VBT implementation (experimental: testing)
+@anchor{#i945-gfx-x60t60-vbt-implementation-experimental-testing}
+intel_bios_dumper in intel-gpu-tools seems interesting.
+
+@strong{Use 'drm.debug=0x06' kernel parameter when booting in grub!}
+
+Before each test run, boot a live USB and delete the old logs in /var/log (kernel log, xorg log, dmesg and so on).
+
+Load (from the ROM) the runningvga.bin for each LCD panel on each system; do not execute it, only load it! (coreboot will have to be modified). Rename the ROM appropriately, based on the system name and the panel name. coreboot_nativegfx_5868_plusrunningvga_t60_14_LTD141ECMB.rom, for instance. Keep a copy for later use.
+
+You are supposed to:
+
+@itemize
+@item
+enable native graphics in menuconfig
+@item
+include the self-modified VGA ROM (load, but not execute) - for reverse engineering the correct VBT tables.
+@end itemize
+
+With each boot, make notes about what you see and get logs using the @ref{#standard_test,standard test}. You will need the files from @ref{#intelvbttool_results,#intelvbttool_results} for each system.
+
+Results (# means untested):
+
+@itemize
+@item
+@strong{X60/X60s:}
+@itemize
+@item
+TMD-Toshiba LTD121ECHB: #
+@item
+CMO N121X5-L06: #
+@item
+Samsung LTN121XJ-L07: #
+@item
+BOE-Hydis HT121X01-101: #
+@end itemize
+
+@item
+@strong{X60T XGA:}
+@itemize
+@item
+BOE-Hydis HV121X03-100: #
+@end itemize
+
+@item
+@strong{X60T SXGA+:}
+@itemize
+@item
+BOE-Hydis HV121P01-100: #
+@end itemize
+
+@item
+@strong{T60 14" XGA:}
+@itemize
+@item
+Samsung LTN141XA-L01: #
+@item
+CMO N141XC: #
+@item
+BOE-Hydis HT14X14: #
+@item
+TMD-Toshiba LTD141ECMB: #
+@end itemize
+
+@item
+@strong{T60 14" SXGA+}
+@itemize
+@item
+TMD-Toshiba LTD141EN9B: #
+@item
+Samsung LTN141P4-L02: #
+@item
+Boe-Hydis HT14P12: #
+@end itemize
+
+@item
+@strong{T60 15" XGA}
+@itemize
+@item
+Samsung LTN150XG-L08: #
+@item
+LG-Philips LP150X09: #
+@item
+13N7068 (IDtech): #
+@item
+13N7069 (CMO): #
+@end itemize
+
+@item
+@strong{T60 15" SXGA+}
+@itemize
+@item
+LG-Philips LP150E05-A2K1: #
+@item
+BOE-Hydis HV150P01-100: #
+@end itemize
+
+@item
+@strong{T60 15" UXGA}
+@itemize
+@item
+BOE-Hydis HV150UX1-100: #
+@item
+IDTech N150U3-L01: #
+@item
+BOE-Hydis HV150UX1-102: #
+@end itemize
+
+@item
+@strong{T50 15" QXGA}
+@itemize
+@item
+IDtech IAQX10N: #
+@item
+IDtech IAQX10S: #
+@end itemize
+
+@end itemize
+
+@ref{#pagetop,Back to top of page}
+
+@node intelvbttool test results VGA ROM dumps
+@chapter intelvbttool test results (VGA ROM dumps)
+@anchor{#intelvbttool-test-results-vga-rom-dumps}
+The VBIOS on i945 (intel gpu) platforms is self-modifying; that is, its contents change when you run it. intelvbttool takes a dump of the currently running vbios, and parses it.
+
+The idea is that we can extract the VBT tables using this knowledge, on the X60, X60 Tablet and T60 (Intel GPU).
+
+Here is an example of how VBT was implemented on the ThinkPad X230: @uref{http://review.coreboot.org/#/c/5396,http://review.coreboot.org/#/c/5396}.
+
+You'll need to build a T60 ROM with SeaBIOS and the VGA ROM (for Intel GPU). An X60 ROM is also needed (same configuration, using the VGA ROM for X60).
+
+T60 has DVI on its dock, make sure that the dock is attached when getting this output.
+
+Get intelvbttool here: @uref{http://review.coreboot.org/#/c/5842,http://review.coreboot.org/#/c/5842} (util/intelvbttool).
+
+Now dump a copy of the running VGA BIOS: @strong{$ sudo dd if=/dev/mem bs=64k of=runningvga.bin skip=12 count=1}@* Then do (and record the output):@* @strong{$ ./intelvbttool runningvga.bin > intelvbttool_out}
+
+Backup both files (runningvga.bin and intelvbttool_out), renaming them to match the system and LCD panel used. @uref{../misc/index.html#get_edid_panelname,../misc/index.html#get_edid_panelname} will show you how to get the name (model) of the LCD panel used.
+@menu
+* Test results # means untested and all had docks unless noted::
+@end menu
+
+@node Test results # means untested and all had docks unless noted
+@section Test results (# means untested and all had docks, unless noted).
+@anchor{#test-results-means-untested-and-all-had-docks-unless-noted.}
+@itemize
+@item
+@strong{X60/X60s:}
+@itemize
+@item
+TMD-Toshiba LTD121ECHB: #
+@item
+CMO N121X5-L06: #
+@item
+Samsung LTN121XJ-L07: #
+@item
+BOE-Hydis HT121X01-101: #
+@end itemize
+
+@item
+@strong{X60T XGA (1024x768):}
+@itemize
+@item
+BOE-Hydis HV121X03-100: #
+@end itemize
+
+@item
+@strong{X60T SXGA+ (1400x1050):}
+@itemize
+@item
+BOE-Hydis HV121P01-100: #
+@end itemize
+
+@item
+@strong{T60 14" XGA (1024x768):}
+@itemize
+@item
+Samsung LTN141XA-L01: #
+@item
+CMO N141XC: #
+@item
+BOE-Hydis HT14X14: #
+@item
+TMD-Toshiba LTD141ECMB: #
+@end itemize
+
+@item
+@strong{T60 14" SXGA+ (1400x1050):}
+@itemize
+@item
+TMD-Toshiba LTD141EN9B: #
+@item
+Samsung LTN141P4-L02: #
+@item
+Boe-Hydis HT14P12: #
+@end itemize
+
+@item
+@strong{T60 15" XGA (1024x768):}
+@itemize
+@item
+Samsung LTN150XG-L08: #
+@item
+LG-Philips LP150X09: #
+@item
+13N7068 (IDtech): #
+@item
+13N7069 (CMO): #
+@end itemize
+
+@item
+@strong{T60 15" SXGA+ (1400x1050):}
+@itemize
+@item
+LG-Philips LP150E05-A2K1: #
+@item
+BOE-Hydis HV150P01-100: #
+@end itemize
+
+@item
+@strong{T60 15" UXGA (1600x1200):}
+@itemize
+@item
+BOE-Hydis HV150UX1-100: #
+@item
+IDTech N150U3-L01: #
+@item
+BOE-Hydis HV150UX1-102: #
+@end itemize
+
+@item
+@strong{T60 15" QXGA (2048x1536):}
+@itemize
+@item
+IDtech IAQX10N: #
+@item
+IDtech IAQX10S: #
+@end itemize
+
+@end itemize
+
+@ref{#pagetop,Back to top of page.}
+
+@node Fallback patches
+@chapter Fallback patches
+@anchor{#fallback-patches}
+@itemize
+@item
+Todo: test gnutoo's fallback patches: @uref{http://www.coreboot.org/Fallback_mechanism,http://www.coreboot.org/Fallback_mechanism} (some parts use systemd. adapt for upstart, which is what trisquel uses)@* see @uref{gnutoo_fallback_patch,this IRC log} (warning, not cleaned up)
+@end itemize
+
+@ref{#pagetop,Back to top of page.}
+
+@node Other - unlisted low priority
+@chapter Other - unlisted (low priority)
+@anchor{#other---unlisted-low-priority}
+@itemize
+@item
+PTE errors still exist on i945 with 6718 (which is merged). @uref{http://review.coreboot.org/#/c/6718/,http://review.coreboot.org/#/c/6718/}
+@itemize
+@item
+@uref{../resources/misc/dumps/pte_x60_6718/dmesg,dmesg}
+@item
+@uref{../resources/misc/dumps/pte_x60_6718/kern.log,kern.log}
+@item
+This doesn't seem to cause any issues for general use.
+@end itemize
+
+@item
+Implement INT 10H support in i945 native graphics. (this will be a lot of work. SeaBIOS has code for some geode boards, to get a general idea).
+@item
+T60 15" QXGA (2048x1536): fixed issue where GRUB wouldn't show any graphics. (Not many people have this panel)
+@itemize
+@item
+It might be the same issue I ran into with Paul on the X60 (not enough memory being allocated) since the same code works on T60 SXGA+ and UXGA, where GRUB actually display graphics.
+@end itemize
+
+@end itemize
+
+@ref{#pagetop,Back to top of page.}
+
+Copyright © 2014, 2015 Francis Rowe <info@@gluglug.org.uk>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/future/old.texi b/docs/src/future/old.texi
new file mode 100644
index 0000000..e0f845f
--- /dev/null
+++ b/docs/src/future/old.texi
@@ -0,0 +1,203 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title libreboot tutorials
+@end titlepage
+
+@node Top
+@top libreboot tutorials
+
+@menu
+* Development notes old/obsolete notes::
+* Table of contents::
+* X60 native graphics initialization with backlight controls::
+* T60 native graphics initialization with backlight controls::
+* i945 3D fix based on 5927 for kernel 312+ on 5320::
+* i945/X60 Coreboot 5927 testing 3D fix for kernel 312+ on replay code::
+@end menu
+
+@node Development notes old/obsolete notes
+@chapter Development notes (old/obsolete notes)
+@anchor{#development-notes-oldobsolete-notes}
+For current notes, see @uref{index.html,index.html}.
+
+These are old (obsolete) notes that mare kept because they might become useful again in the future.
+
+@node Table of contents
+@chapter Table of contents
+@anchor{#table-of-contents}
+@itemize
+@item
+@ref{#x60_native_notes,X60 native graphics initialization (backlight controls)}
+@item
+@ref{#t60_native_notes,T60 native graphics initialization (backlight controls)}
+@item
+@ref{#5320_kernel312fix,i945: 3D fix (based on 5927) for kernel 3.12+ on 5320}
+@item
+@ref{#x60_cb5927_testing,i945/x60: coreboot 5927 testing (3D fix for kernel 3.12+ on replay code)}
+@end itemize
+
+@node X60 native graphics initialization with backlight controls
+@chapter X60 native graphics initialization (with backlight controls)
+@anchor{#x60-native-graphics-initialization-with-backlight-controls}
+@strong{This is now obsolete. A better way was found (included in libreboot): @uref{http://review.coreboot.org/#/c/6731/,http://review.coreboot.org/#/c/6731/}}
+
+@strong{@emph{Also check @ref{#5320_kernel312fix,#5320_kernel312fix} (to fix 3D on kernel 3.12/higher)}}
+
+@strong{The fix below was done on 5320/6 (from review.coreboot.org) but should work just fine on later versions of 5320.}
+
+Native gpu init + backlight controls! (Fn keys). Also confirmed on X60 Tablet (1024x768) and X60 Tablet (1400x1050)
+
+@strong{Add backlight controls:} in @emph{src/mainboard/lenovo/x60/devicetree.cb}, change @strong{gpu_backlight} to @strong{0x879F879E}
+
+That's all! @strong{This has also been backported into libreboot 5th release (line 1233 in src/mainboard/lenovo/x60/i915io.c)}. GNUtoo (Denis Carikli) told me about the register @strong{BLC_PWM_CTL} and that you could set it to control backlight. I read that address using devmem2 while running the VBIOS:@* @strong{# devmem2 0xe4361254 w}
+
+The change is also included in libreboot 6.
+
+When doing this, it gave back that value. The same trick was used to get backlight controls for T60 (see @ref{#t60_native_notes,#t60_native_notes}).
+@menu
+* Further notes::
+@end menu
+
+@node Further notes
+@section Further notes
+@anchor{#further-notes}
+Reading @strong{0xe4361254} (address) in Lenovo BIOS always yields FFFFFFFF, even when writing to it (and writing to it doesn't affect brightness controls). 'mtjm' on IRC found that the buttons (Fn keys) control /sys/class/backlight/acpi_video0 which has no affect on 61254 (BLC_PWM_CTL). This person says intel_backlight has different values and uses the register. devmem2 works, needs checking @strong{lspci -vv} for where the memory is mapped, which is different than on coreboot; mtjm found that it was 0xec061254 on his system (X60 Tablet), and the register value is different too. @strong{This is relevant, because we still don't know how backlight controls are actually handled. We got it working by accident. We need to know more.}.
+
+Intel-gpu-tools may prove useful for further debugging: @uref{http://cgit.freedesktop.org/xorg/app/intel-gpu-tools/,http://cgit.freedesktop.org/xorg/app/intel-gpu-tools/}
+
+mtjm says 0xe4300000 is an MMIO region of the gpu (lspci -vv shows it), 0x61254 (BLC_PWM_CTL) is a documented register. Searching the kernel driver for backlight shows that in intel_panel.c this register is used (there is an XXX comment about finding the right value, where recent kernels get it from.
+
+What we want to do is calculate a good value, instead of setting it in devicetree.cb. mtjm says about backlight physics: it has a light source , uses pulse width modulation (PWM) to turn it on/off, dimming is done by spending less time on. @strong{Note: this may not be correct; this person says that their understanding is based on how the Lenote yeeloong works}.
+
+mtjm goes on to say, that the register specifies the frequency used for PWM in its depending on the GPU core frequency, so it might be possible to calculate it without hardcoded laptop-specific values. Therefore, I am supposed to find out the 'display core frequency' (mtjm says there might be a register for it; also, it might be in 5320 or the replay code) and the PWM modulation frequency. https://en.wikipedia.org/wiki/Backlight#Flicker_due_to_backlight_dimming
+
+phcoder (Vladimir Serbinenko) who is author of 5320 (review.coreboot.org) talks about 'duty cycle limit' and 'flickering frequency'.
+
+@ref{#pagetop,Back to top of page}
+
+@node T60 native graphics initialization with backlight controls
+@chapter T60 native graphics initialization (with backlight controls)
+@anchor{#t60-native-graphics-initialization-with-backlight-controls}
+@strong{This is now obsolete. A better way was found (included in libreboot): @uref{http://review.coreboot.org/#/c/6731/,http://review.coreboot.org/#/c/6731/}}
+
+@strong{@emph{Also check @ref{#5320_kernel312fix,#5320_kernel312fix} (to fix 3D on kernel 3.12/higher)}}
+
+@strong{The fix below was done on an earlier version of 5345 changeset (review.coreboot.org), but should work on the current version. it is included in libreboot 6}
+
+@strong{Add backlight controls:} in @emph{src/mainboard/lenovo/t60/devicetree.cb}, change @strong{gpu_backlight} to @strong{0x58BF58BE}
+
+Hold on! Check @uref{../misc/index.html#get_edid_panelname,../misc/index.html#get_edid_panelname} to know what LCD panel you have. This is important for the next step!
+@menu
+* Supported panels::
+@end menu
+
+@node Supported panels
+@section Supported panels
+@anchor{#supported-panels}
+@uref{../hcl/index.html#supported_t60_list,../hcl/index.html#supported_t60_list}.
+
+See @uref{index.html#lcd_i945_incompatibility,index.html#lcd_i945_incompatibility}.
+
+@ref{#pagetop,Back to top of page}
+
+@node i945 3D fix based on 5927 for kernel 312+ on 5320
+@chapter i945: 3D fix (based on 5927) for kernel 3.12+ on 5320
+@anchor{#i945-3d-fix-based-on-5927-for-kernel-3.12-on-5320}
+@strong{This is now obsolete. Merged in coreboot: @uref{http://review.coreboot.org/#/c/5927/,http://review.coreboot.org/#/c/5927/}}
+
+@strong{This needs to be rewritten (or better organized, or deleted?)}. This is also now included in libreboot 6 (using the proper way, not the 7c0000 method which was a hack)
+
+@strong{This was done on 5320/6 so far. The fix below is for 5320/6 which is now obsolete. This needs to be re-done for the latest version of 5320. The fix below is (in practise) only for reference, therefore.}
+
+See @ref{#x60_cb5927_testing,#x60_cb5927_testing} for the original (and current) fix, for the replay code. Now we want to implement that on top of @uref{http://review.coreboot.org/#/c/5320,http://review.coreboot.org/#/c/5320} which is the current code for native graphics initialization on i945.
+
+src/northbridge/intel/i945/gma.c (using the 7c0000 hack) on 5320: @uref{../resources/misc/dumps/5320_7c0000_gma.c,5320_7c0000_gma.c} (rename it to gma.c, replacing the current one).
+
+The above is a hack (as is the original). A better (more correct) method is implemented in later versions of 5927, so that should also be adapted for 5320. For now, you can use the above fix.
+
+The correct way to do it is to set gtt address to (end of stolen memory - gtt size), which is what later versions of 5927 do (successfully).
+
+Here is some debugging output using intel_gpu_tools v1.2-1 (from trisquel repositories) using tool "intel_gtt":
+
+@itemize
+@item
+Trisquel 6. kernel 3.14.4:
+@itemize
+@item
+with libreboot 5th release (using the 7c0000 gtt hack from 5927/3): @uref{http://paste.debian.net/104306,http://paste.debian.net/104306}
+@item
+with coreboot+vgarom: @uref{http://paste.debian.net/104309,http://paste.debian.net/104309}
+@end itemize
+
+@item
+Trisquel 6. kernel 3.2.0-60 (from Trisquel repositories):
+@itemize
+@item
+with coreboot (no vbios or native init): @uref{http://paste.debian.net/104341,http://paste.debian.net/104341}
+@end itemize
+
+@end itemize
+
+@ref{#pagetop,Back to top of page}
+
+@node i945/X60 Coreboot 5927 testing 3D fix for kernel 312+ on replay code
+@chapter i945/X60: Coreboot 5927 testing (3D fix for kernel 3.12+ on replay code)
+@anchor{#i945x60-coreboot-5927-testing-3d-fix-for-kernel-3.12-on-replay-code}
+@strong{This is now obsolete. Merged in coreboot: @uref{http://review.coreboot.org/#/c/5927/,http://review.coreboot.org/#/c/5927/}}
+
+@strong{The latest version as-is (5927/11) has not been tested by me yet. Always boot with 'drm.debug=0x06' kernel parameter when testing this.}
+
+This is the fix for 3D on kernel 3.12 and higher on i945 (ThinkPad X60 in this case). This is for the replay code. Libreboot 5th release has a version of this backported already (based on 5927/3 using the '7c0000' hack).
+
+@strong{The replay code is obsolete (see 5320 changeset on review.coreboot.org for better version which supports more systems/screens, and then 5345 for T60). Information here for reference since that is where the fix was first applied.}
+
+Read the information on @uref{http://review.coreboot.org/#/c/5927/,http://review.coreboot.org/#/c/5927/}.
+
+For historical purposes, here is a collection of IRC logs that once existed on this page, related to the issue: @uref{../resources/misc/dumps/kernel312_irc,kernel312_irc}.
+
+PGETBL_CTL differs between VBIOS (-) and native graphics init (+).@* - PGETBL_CTL: 0x3ffc0001@* + PGETBL_CTL: 0x3f800001
+
+GTT (graphics translation table) size is PGETBL_save, max 256 KiB. BSM (Base of Stolen Memory) is given by the bios.
+
+@itemize
+@item
+5927/7: @uref{../resources/misc/dumps/5927_7.tar.gz,5927_7.tar.gz} (GRUB graphics are correct now, and 3D still works)
+@item
+5927/6: @uref{../resources/misc/dumps/5927_6.tar.gz,5927_6.tar.gz} (GRUB graphics still corrupt, 3D/everything still works after GRUB)
+@item
+5927/5: @uref{../resources/misc/dumps/5927_5.tar.gz,5927_5.tar.gz} (GRUB graphics corrupt, 3D/everything still works after GRUB)
+@item
+5927/3: @uref{../resources/misc/dumps/5927_3.tar.gz,5927_3.tar.gz} (3D still works! kernel 3.14.4) - the '7c0000' hack
+@item
+5927/2: @uref{../resources/misc/dumps/5927_2.tar.gz,5927_2.tar.gz} (3D works! kernel 3.14.4) - the '7c0000' hack
+@item
+5927/1 (didn't fix the 3D issue):
+@itemize
+@item
+@uref{../resources/misc/dumps/5927_cbmemc,cbmem -c}
+@item
+@uref{../resources/misc/dumps/5927_crashdump,/sys/class/drm/card0/error}
+@item
+@uref{../resources/misc/dumps/5927_config,.config}
+@end itemize
+
+@end itemize
+
+@ref{#pagetop,Back to top of page}
+
+Copyright © 2014, 2015 Francis Rowe <info@@gluglug.org.uk>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/git/index.texi b/docs/src/git/index.texi
new file mode 100644
index 0000000..ff53650
--- /dev/null
+++ b/docs/src/git/index.texi
@@ -0,0 +1,947 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title Building libreboot from source
+@end titlepage
+
+@node Top
+@top Building libreboot from source
+
+@menu
+* Building libreboot from source::
+* Install build dependencies::
+* Get the full source code from metadata git clone::
+* How to build "bucts" for LenovoBIOS X60/X60S/X60T/T60::
+* How to build "flashrom"::
+* Configuring libreboot::
+* How to build the ROM images::
+@end menu
+
+@node Building libreboot from source
+@chapter Building libreboot from source
+@anchor{#building-libreboot-from-source}
+This section relates to building libreboot from source, and working with the git repository.
+
+Or @uref{../index.html,Back to main index}.
+
+@itemize
+@item
+@ref{#build_dependencies,Install build dependencies}
+@item
+@ref{#build_meta,Get the full source code from metadata (git clone)}
+@item
+@ref{#build_bucts,How to build "bucts" (for LenovoBIOS X60/X60S/X60T/T60)}
+@item
+@ref{#build_flashrom,How to build "flashrom"}
+@item
+@ref{#config,Configuring libreboot}
+@itemize
+@item
+@ref{#config_dmidecode,dmidecode}
+@item
+@ref{#config_grub,GRUB payload}
+@itemize
+@item
+@ref{#config_kfsn4-dre,ASUS KFSN4-DRE}
+@item
+@ref{#config_x60,ThinkPad X60, X60S and X60 Tablet}
+@item
+@ref{#config_t60,ThinkPad T60}
+@item
+@ref{#config_x200,ThinkPad X200}
+@item
+@ref{#config_r400,ThinkPad R400}
+@item
+@ref{#config_r500,ThinkPad R500}
+@item
+@ref{#config_t400,ThinkPad T400}
+@item
+@ref{#config_t500,ThinkPad T500}
+@item
+@ref{#config_macbook21,MacBook2,1}
+@item
+@ref{#config_qemu_i440fx_piix4,QEMU (x86 i440fx/piix4)}
+@item
+@ref{#config_qemu_q35_ich9,QEMU (x86 q35/ich9)}
+@end itemize
+
+@item
+@ref{#config_depthcharge,Depthcharge payload}
+@itemize
+@item
+@ref{#config_c201,ASUS Chromebook C201}
+@end itemize
+
+@end itemize
+
+@item
+@ref{#build,How to build the ROM images}
+@end itemize
+
+@node Install build dependencies
+@chapter Install build dependencies
+@anchor{#install-build-dependencies}
+Before doing anything, you need the dependencies first. This is true if you want to build libreboot from source, with either libreboot_src.tar.xz or git. @strong{If you are using libreboot_util.tar.xz (binary archive) then you can ignore this, because ROM images and statically compiled executables for the utilities are included.}
+
+For Trisquel 7, you can run the following command:@* $ @strong{sudo ./build dependencies trisquel7}
+
+For Parabola, you can run the following command:@* $ @strong{sudo ./build dependencies parabola}@* or:@* # @strong{./build dependencies parabola}
+
+For other GNU/Linux distributions, you can adapt the existing scripts.
+
+@ref{#pagetop,Back to top of page}
+
+@node Get the full source code from metadata git clone
+@chapter Get the full source code from metadata (git clone)
+@anchor{#get-the-full-source-code-from-metadata-git-clone}
+If you downloaded libreboot from git, then there are some steps to download and patch the source code for all relevant dependencies. The archive in the git repository used to be available as a tarball called 'libreboot_meta.tar.gz'. It contains 'metadata' (scripts) which define how the source was created (where it came from).
+
+You can use the scripts included to download everything.
+
+First, @ref{#build_dependencies,install the build dependencies}.
+
+Since libreboot makes extensive use of git, you need to configure git properly. If you have not yet configured git, then the minimum requirement is:@* $ @strong{git config --global user.name "Your Name"}@* $ @strong{git config --global user.email your@@emailaddress.com}@* This is what will also appear in git logs if you ever commit your own changes to a given repository. For more information, see @uref{http://git-scm.com/doc,http://git-scm.com/doc}.
+
+Another nice config for you (optional, but recommended):@* $ @strong{git config --global core.editor nano}@* $ @strong{git config --global color.status auto}@* $ @strong{git config --global color.branch auto}@* $ @strong{git config --global color.interactive auto}@* $ @strong{git config --global color.diff auto}
+
+After that, run the script:@* $ @strong{./download all}
+
+What this did was download everything (grub, coreboot, memtest86+, bucts, flashrom) at the versions last tested for this release, and patch them. Read the script in a text editor to learn more.
+
+To build the ROM images, see @ref{#build,#build}.
+
+@ref{#pagetop,Back to top of page.}
+
+@node How to build "bucts" for LenovoBIOS X60/X60S/X60T/T60
+@chapter How to build "bucts" (for LenovoBIOS X60/X60S/X60T/T60)
+@anchor{#how-to-build-bucts-for-lenovobios-x60x60sx60tt60}
+@strong{This is for Lenovo BIOS users on the ThinkPad X60/X60S, X60 Tablet and T60. If you have coreboot or libreboot running already, ignore this.}
+
+BUC.TS isn't really specific to these laptops, but is a bit inside the a register in the chipset on some Intel systems.
+
+Bucts is needed when flashing in software the X60/X60S/X60T/T60 ROM while Lenovo BIOS is running; external flashing will be safe regardless. Each ROM contains identical data inside the two final 64K region in the file*. This corresponds to the final two 64K regions in the flash chip. Lenovo BIOS will prevent you from writing the final one, so running "@strong{bucts 1}" will set the system to boot from the other block instead (which is writeable along with everything beneath it when using a patched flashrom. see @ref{#build_flashrom,#build_flashrom}). After shutting down and booting up after the first flash of libreboot, the final 64K block is writeable so you flash the ROM again with an unpatched flashrom and run "@strong{bucts 0}" to make the system boot from the normal (highest) block again.
+
+*Libreboot ROM images have identical data in those two 64KiB regions because dd is used to do that, by the build system. If you're building from upstream (coreboot), you have to do it manually.
+
+BUC.TS is backed up (powered) by the NVRAM battery (or CMOS battery, as some people call it). On thinkpads, this is typically in a yellow plastic package with the battery inside, connected via power lines to the mainboard. Removing that battery removes power to BUC.TS, resetting the bit back to 0 (if you previously set it to 1).
+
+BUC.TS utility is included in libreboot_src.tar.xz and libreboot_util.tar.xz.@* @strong{If you downloaded from git, follow @ref{#build_meta,#build_meta} before you proceed.}
+
+"BUC" means "@strong{B}ack@strong{u}p @strong{C}ontrol" (it's a register) and "TS" means "@strong{T}op @strong{S}wap" (it's a status bit). Hence "bucts" (BUC.TS). TS 1 and TS 0 corresponds to bucts 1 and bucts 0.
+
+If you have the binary release archive, you'll find executables under ./bucts/. Otherwise if you need to build from source, continue reading.
+
+First, @ref{#build_dependencies,install the build dependencies}.
+
+To build bucts, do this in the main directory:@* $ @strong{./build module bucts}
+
+To statically compile it, do this:@* $ @strong{./build module bucts static}
+
+The "builddeps" script in libreboot_src also makes use of builddeps-bucts.
+
+@ref{#pagetop,Back to top of page.}
+
+@node How to build "flashrom"
+@chapter How to build "flashrom"
+@anchor{#how-to-build-flashrom}
+Flashrom is the utility for flashing/dumping ROM images. This is what you will use to install libreboot.
+
+Flashrom source code is included in libreboot_src.tar.xz and libreboot_util.tar.xz.@* @strong{If you downloaded from git, follow @ref{#build_meta,#build_meta} before you proceed.}
+
+If you are using the binary release archive, then there are already binaries included under ./flashrom/. The flashing scripts will try to choose the correct one for you. Otherwise if you wish to re-build flashrom from source, continue reading.
+
+First, @ref{#build_dependencies,install the build dependencies}.
+
+To build it, do the following in the main directory:@* $ @strong{./build module flashrom}
+
+To statically compile it, do the following in the main directory:@* $ @strong{./build module flashrom static}
+
+After you've done that, under ./flashrom/ you will find the following executables:
+
+@itemize
+@item
+@strong{flashrom}
+@itemize
+@item
+For flashing while coreboot or libreboot is running.
+@end itemize
+
+@item
+@strong{flashrom_lenovobios_sst}
+@itemize
+@item
+This is patched for flashing while Lenovo BIOS is running on an X60 or T60 with the SST25VF016B (SST) flash chip.
+@end itemize
+
+@item
+@strong{flashrom_lenovobios_macronix}
+@itemize
+@item
+This is patched for flashing while Lenovo BIOS is running on an X60 or T60 with the MX25L1605D (Macronix) flash chip.
+@end itemize
+
+@end itemize
+
+The "builddeps" script in libreboot_src also makes use of builddeps-flashrom.
+
+@ref{#pagetop,Back to top of page.}
+
+@node Configuring libreboot
+@chapter Configuring libreboot
+@anchor{#configuring-libreboot}
+Before building a ROM in libreboot (or coreboot, for that matter), you need to configure it. Configuration files should already be included, so you don't need to do anything. This information is only for reference. If you are updating or modifying coreboot-libre, and need to update the configs in any way, refer to @uref{../maintain/index.html#newboard_libreboot,../maintain/index.html#newboard_libreboot}.
+
+If you've already built a kernel before, you know how to use this interface.
+@menu
+* dmidecode::
+* GRUB payload::
+* Depthcharge payload::
+@end menu
+
+@node dmidecode
+@section dmidecode
+@anchor{#dmidecode}
+There is certain information that can be useful to enter in particular:
+
+@itemize
+@item
+Local version string
+@item
+SMBIOS Serial Number
+@item
+SMBIOS Manufacturer
+@item
+SMBIOS Version
+@item
+SMBIOS Product name
+@end itemize
+
+This information can be obtained using:@* @strong{$ sudo dmidecode}@* @strong{# dmidecode}
+
+Specifically, it's good practise to enter the same information for libreboot that you found when running this with the original BIOS or firmware. @strong{libreboot has already done this for you. This information is for reference, in the hope that it will be useful.}
+
+In practise, this information is useless and you can just leave it on the defaults that coreboot uses (this is what libreboot does, on most boards).
+
+@node GRUB payload
+@section GRUB payload
+@anchor{#grub-payload}
+GRUB is one of the payloads that libreboot targets.
+
+Configurations are then saved as files called @strong{".config"}. Copies of each configuration used for each system type by the libreboot build scripts are stored in resources/libreboot/config/grub/
+@menu
+* ASUS KFSN4-DRE configuration file resources/libreboot/config/grub/kfsn4-dre/config::
+* ThinkPad X60 X60S and X60 Tablet configuration file resources/libreboot/config/grub/x60/config::
+* ThinkPad T60 configuration file resources/libreboot/config/grub/t60/config::
+* ThinkPad X200 configuration file resources/libreboot/config/grub/x200_4mb/config and resources/libreboot/config/grub/x200_8mb/config::
+* ThinkPad R400 configuration file resources/libreboot/config/grub/r400_4mb/config and resources/libreboot/config/grub/r400_8mb/config::
+* ThinkPad R500 configuration file resources/libreboot/config/grub/r500_4mb/config::
+* ThinkPad T400 configuration file resources/libreboot/config/grub/t400_4mb/config and resources/libreboot/config/grub/t400_8mb/config::
+* ThinkPad T500 configuration file resources/libreboot/config/grub/t500_4mb/config and resources/libreboot/config/grub/t500_8mb/config::
+* MacBook21 configuration file resources/libreboot/config/grub/macbook21/config::
+* QEMU x86 i440fx/piix4 configuration file resources/libreboot/config/grub/qemu_i440fx_piix4/config::
+* QEMU x86 q35/ich9 configuration file resources/libreboot/config/grub/qemu_q35_ich9/config::
+@end menu
+
+@node ASUS KFSN4-DRE configuration file resources/libreboot/config/grub/kfsn4-dre/config
+@subsection ASUS KFSN4-DRE configuration (file: resources/libreboot/config/grub/kfsn4-dre/config)
+@anchor{#asus-kfsn4-dre-configuration-file-resourceslibrebootconfiggrubkfsn4-dreconfig}
+@itemize
+@item
+General setup / Expert mode = @emph{enable}
+@item
+General / Use CMOS for configuration values = @emph{enable}
+@item
+Mainboard / Mainboard vendor = @emph{ASUS}
+@item
+Mainboard / Mainboard model = @emph{KFSN4-DRE}
+@item
+Mainboard / ROM chip size = @emph{1024 KB (1 MB)}
+@item
+Chipset / Include CPU microcode in CBFS = @emph{Do not include microcode updates}
+@item
+Devices / Use native graphics initialization = @emph{enable}
+@item
+Display / Keep VESA framebuffer = @emph{disable} (disable for text-mode graphics, enable for coreboot vesa framebuffer)
+@itemize
+@item
+Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time to enable coreboot framebuffer for a separate set of ROM images, in each system.
+@end itemize
+
+@item
+Generic Drivers / USB 2.0 EHCI debug dongle support = @emph{Enable}
+@item
+Generic Drivers / Enable early (pre-RAM) usbdebug = @emph{Enable}
+@item
+Generic Drivers / Type of dongle = @emph{Net20DC or compatible}
+@item
+Generic Drivers / Digitizer = @emph{Present}
+@item
+Console / USB dongle console output = @emph{enable}
+@item
+Payload / Add a payload = @emph{An ELF executable payload}
+@item
+Payload / Payload path and filename = @emph{grub.elf}
+@end itemize
+
+Now go back into Devices:
+
+@itemize
+@item
+Devices / Run VGA Option ROMs = @emph{disable}
+@item
+Devices / Run Option ROMs on PCI devices = @emph{disable}
+@end itemize
+
+The resulting .config file was saved as resources/libreboot/config/@strong{grub/kfsn4-dre/config} and is used by the build scripts for this system.
+
+@node ThinkPad X60 X60S and X60 Tablet configuration file resources/libreboot/config/grub/x60/config
+@subsection ThinkPad X60, X60S and X60 Tablet configuration (file: resources/libreboot/config/grub/x60/config)
+@anchor{#thinkpad-x60-x60s-and-x60-tablet-configuration-file-resourceslibrebootconfiggrubx60config}
+@itemize
+@item
+General setup / Expert mode = @emph{enable}
+@item
+General / Use CMOS for configuration values = @emph{enable}
+@item
+Mainboard / Mainboard vendor = @emph{Lenovo}
+@item
+Mainboard / Mainboard model = @emph{ThinkPad X60 / X60s / X60t}
+@item
+Mainboard / ROM chip size = @emph{2048 KB (2 MB)}
+@item
+Chipset / Include CPU microcode in CBFS = @emph{Do not include microcode updates}
+@item
+Devices / Use native graphics initialization = @emph{enable}
+@item
+Display / Keep VESA framebuffer = @emph{disable} (disable for text-mode graphics, enable for coreboot vesa framebuffer)
+@itemize
+@item
+Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time to enable coreboot framebuffer for a separate set of ROM images, in each system.
+@end itemize
+
+@item
+Generic Drivers / USB 2.0 EHCI debug dongle support = @emph{Enable}
+@item
+Generic Drivers / Enable early (pre-RAM) usbdebug = @emph{Enable}
+@item
+Generic Drivers / Type of dongle = @emph{Net20DC or compatible}
+@item
+Generic Drivers / Digitizer = @emph{Present}
+@item
+Console / USB dongle console output = @emph{enable}
+@item
+Payload / Add a payload = @emph{An ELF executable payload}
+@item
+Payload / Payload path and filename = @emph{grub.elf}
+@end itemize
+
+Now go back into Devices:
+
+@itemize
+@item
+Devices / Run VGA Option ROMs = @emph{disable}
+@item
+Devices / Run Option ROMs on PCI devices = @emph{disable}
+@end itemize
+
+The resulting .config file was saved as resources/libreboot/config/@strong{grub/x60/config} and is used by the build scripts for this system.
+
+This configuration is used on all variants: X60, X60S and X60 Tablet.
+
+@node ThinkPad T60 configuration file resources/libreboot/config/grub/t60/config
+@subsection ThinkPad T60 configuration (file: resources/libreboot/config/grub/t60/config)
+@anchor{#thinkpad-t60-configuration-file-resourceslibrebootconfiggrubt60config}
+@itemize
+@item
+General setup / Expert mode = @emph{enable}
+@item
+General setup / Local version string = @emph{79ETE7WW (2.27 )}
+@item
+General / Use CMOS for configuration values = @emph{enable}
+@item
+Mainboard / Mainboard vendor = @emph{Lenovo}
+@item
+Mainboard / Mainboard model = @emph{ThinkPad T60 / T60p}
+@item
+Mainboard / ROM chip size = @emph{2048 KB (2 MB)}
+@item
+System tables / SMBIOS Serial Number = @emph{L3DKE06}
+@item
+System tables / SMBIOS Version Number = @emph{ThinkPad T60}
+@item
+System tables / SMBIOS Manufacturer = @emph{LENOVO}
+@item
+System tables / SMBIOS Product name = @emph{1951FEG}
+@item
+Chipset / Include CPU microcode in CBFS = @emph{Do not include microcode updates}
+@item
+Devices / Use native graphics initialization = @emph{enable}
+@item
+Display / Keep VESA framebuffer = @emph{disable} (disable for text-mode graphics, enable for coreboot vesa framebuffer)
+@itemize
+@item
+Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time to enable coreboot framebuffer for a separate set of ROM images, in each system.
+@end itemize
+
+@item
+Generic Drivers / USB 2.0 EHCI debug dongle support = @emph{Enable}
+@item
+Generic Drivers / Enable early (pre-RAM) usbdebug = @emph{Enable}
+@item
+Generic Drivers / Type of dongle = @emph{Net20DC or compatible}
+@item
+Console / USB dongle console output = @emph{enable}
+@item
+Payload / Add a payload = @emph{An ELF executable payload}
+@item
+Payload / Payload path and filename = @emph{grub.elf}
+@end itemize
+
+Go back into Devices:
+
+@itemize
+@item
+Devices / Run VGA Option ROMs = @emph{disable}
+@item
+Devices / Run Option ROMs on PCI devices = @emph{disable}
+@end itemize
+
+The resulting .config file was saved as resources/libreboot/config/@strong{grub/t60/config} and is used by the build scripts for this system.
+
+It is believed that the motherboards on 14.1" and 15.1" T60s are the same, so the same configuration is used on both the 14.1" and 15.1" T60s.
+
+@node ThinkPad X200 configuration file resources/libreboot/config/grub/x200_4mb/config and resources/libreboot/config/grub/x200_8mb/config
+@subsection ThinkPad X200 configuration (file: resources/libreboot/config/grub/x200_4mb/config and resources/libreboot/config/grub/x200_8mb/config)
+@anchor{#thinkpad-x200-configuration-file-resourceslibrebootconfiggrubx200_4mbconfig-and-resourceslibrebootconfiggrubx200_8mbconfig}
+These are saved as two configs, because there are 2 size flash chips: 4MB or 8MB.
+
+@itemize
+@item
+General / Expert mode = @emph{enable}
+@item
+General / Use CMOS for configuration values = @emph{enable}
+@item
+Mainboard / Mainboard vendor = @emph{Lenovo}
+@item
+Mainboard / Mainboard model = @emph{ThinkPad X200}
+@item
+Mainboard / ROM chip size = @emph{4096 KB (4 MB)} or @emph{8192 KB (8 MB)} depending on flash chip size
+@item
+Chipset / Include CPU microcode in CBFS = @emph{Do not include microcode updates}
+@item
+Chipset / Size of CBFS filesystem in ROM = byte size @emph{0x7FD000} (for 8MB flash chip) or @emph{3FD000} (for 4MB flash chip)
+@item
+Devices / Use native graphics initialization = @emph{enable}
+@item
+Display / Keep VESA framebuffer = @emph{disable} (disable for text-mode graphics, enable for coreboot vesa framebuffer)
+@itemize
+@item
+Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time to enable coreboot framebuffer for a separate set of ROM images, in each system.
+@end itemize
+
+@item
+Generic Drivers / USB 2.0 EHCI debug dongle support = @emph{Enable}
+@item
+Generic Drivers / Enable early (pre-RAM) usbdebug = @emph{Enable}
+@item
+Generic Drivers / Type of dongle = @emph{Net20DC or compatible}
+@item
+Generic Drivers / Digitizer = @emph{Present}
+@item
+Console / USB dongle console output = @emph{enable}
+@item
+Payload / Add a payload = @emph{An ELF executable payload}
+@item
+Payload / Payload path and filename = @emph{grub.elf}
+@end itemize
+
+Go back and disable option ROMs:
+
+@itemize
+@item
+Devices / Run VGA Option ROMs = @emph{disable}
+@item
+Devices / Run Option ROMs on PCI devices = @emph{disable}
+@end itemize
+
+The resulting .config file was saved as resources/libreboot/config/@strong{grub/x200_8mb/config} and resources/libreboot/config/@strong{grub/x200_4mb/config} and is used by the build scripts for this system.
+
+@node ThinkPad R400 configuration file resources/libreboot/config/grub/r400_4mb/config and resources/libreboot/config/grub/r400_8mb/config
+@subsection ThinkPad R400 configuration (file: resources/libreboot/config/grub/r400_4mb/config and resources/libreboot/config/grub/r400_8mb/config)
+@anchor{#thinkpad-r400-configuration-file-resourceslibrebootconfiggrubr400_4mbconfig-and-resourceslibrebootconfiggrubr400_8mbconfig}
+These are saved as two configs, because there are 2 size flash chips: 4MB or 8MB.
+
+@itemize
+@item
+General / Expert mode = @emph{enable}
+@item
+General / Use CMOS for configuration values = @emph{enable}
+@item
+Mainboard / Mainboard vendor = @emph{Lenovo}
+@item
+Mainboard / Mainboard model = @emph{ThinkPad R400}
+@item
+Mainboard / ROM chip size = @emph{4096 KB (4 MB)} or @emph{8192 KB (8 MB)} depending on flash chip size
+@item
+Chipset / Include CPU microcode in CBFS = @emph{Do not include microcode updates}
+@item
+Chipset / Size of CBFS filesystem in ROM = byte size @emph{0x7FD000} (for 8MB flash chip) or @emph{3FD000} (for 4MB flash chip)
+@item
+Devices / Use native graphics initialization = @emph{enable}
+@item
+Display / Keep VESA framebuffer = @emph{disable} (disable for text-mode graphics, enable for coreboot vesa framebuffer)
+@itemize
+@item
+Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time to enable coreboot framebuffer for a separate set of ROM images, in each system.
+@end itemize
+
+@item
+Generic Drivers / USB 2.0 EHCI debug dongle support = @emph{Enable}
+@item
+Generic Drivers / Enable early (pre-RAM) usbdebug = @emph{Enable}
+@item
+Generic Drivers / Type of dongle = @emph{Net20DC or compatible}
+@item
+Console / USB dongle console output = @emph{enable}
+@item
+Payload / Add a payload = @emph{An ELF executable payload}
+@item
+Payload / Payload path and filename = @emph{grub.elf}
+@end itemize
+
+Go back and disable option ROMs:
+
+@itemize
+@item
+Devices / Run VGA Option ROMs = @emph{disable}
+@item
+Devices / Run Option ROMs on PCI devices = @emph{disable}
+@end itemize
+
+The resulting .config file was saved as resources/libreboot/config/@strong{grub/r400_8mb/config} and resources/libreboot/config/@strong{grub/r400_4mb/config} and is used by the build scripts for this system.
+
+@node ThinkPad R500 configuration file resources/libreboot/config/grub/r500_4mb/config
+@subsection ThinkPad R500 configuration (file: resources/libreboot/config/grub/r500_4mb/config)
+@anchor{#thinkpad-r500-configuration-file-resourceslibrebootconfiggrubr500_4mbconfig}
+@itemize
+@item
+General / Expert mode = @emph{enable}
+@item
+General / Use CMOS for configuration values = @emph{enable}
+@item
+Mainboard / Mainboard vendor = @emph{Lenovo}
+@item
+Mainboard / Mainboard model = @emph{ThinkPad R500}
+@item
+Mainboard / ROM chip size = @emph{4096 KB (4 MB)}
+@item
+Chipset / Include CPU microcode in CBFS = @emph{Do not include microcode updates}
+@item
+Chipset / Size of CBFS filesystem in ROM = @emph{0x3FF000}
+@item
+Devices / Use native graphics initialization = @emph{enable}
+@item
+Display / Keep VESA framebuffer = @emph{disable} (disable for text-mode graphics, enable for coreboot vesa framebuffer)
+@itemize
+@item
+Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time to enable coreboot framebuffer for a separate set of ROM images, in each system.
+@end itemize
+
+@item
+Generic Drivers / USB 2.0 EHCI debug dongle support = @emph{Enable}
+@item
+Generic Drivers / Enable early (pre-RAM) usbdebug = @emph{Enable}
+@item
+Generic Drivers / Type of dongle = @emph{Net20DC or compatible}
+@item
+Console / USB dongle console output = @emph{enable}
+@item
+Payload / Add a payload = @emph{An ELF executable payload}
+@item
+Payload / Payload path and filename = @emph{grub.elf}
+@end itemize
+
+Go back and disable option ROMs:
+
+@itemize
+@item
+Devices / Run VGA Option ROMs = @emph{disable}
+@item
+Devices / Run Option ROMs on PCI devices = @emph{disable}
+@end itemize
+
+The resulting .config file was saved as resources/libreboot/config/@strong{grub/r500_4mb/config} and is used by the build scripts for this system.
+
+@node ThinkPad T400 configuration file resources/libreboot/config/grub/t400_4mb/config and resources/libreboot/config/grub/t400_8mb/config
+@subsection ThinkPad T400 configuration (file: resources/libreboot/config/grub/t400_4mb/config and resources/libreboot/config/grub/t400_8mb/config)
+@anchor{#thinkpad-t400-configuration-file-resourceslibrebootconfiggrubt400_4mbconfig-and-resourceslibrebootconfiggrubt400_8mbconfig}
+These are saved as two configs, because there are 2 size flash chips: 4MB or 8MB.
+
+@itemize
+@item
+General / Expert mode = @emph{enable}
+@item
+General / Use CMOS for configuration values = @emph{enable}
+@item
+Mainboard / Mainboard vendor = @emph{Lenovo}
+@item
+Mainboard / Mainboard model = @emph{ThinkPad T400}
+@item
+Mainboard / ROM chip size = @emph{4096 KB (4 MB)} or @emph{8192 KB (8 MB)} depending on flash chip size
+@item
+Chipset / Include CPU microcode in CBFS = @emph{Do not include microcode updates}
+@item
+Chipset / Size of CBFS filesystem in ROM = byte size @emph{0x7FD000} (for 8MB flash chip) or @emph{3FD000} (for 4MB flash chip)
+@item
+Devices / Use native graphics initialization = @emph{enable}
+@item
+Display / Keep VESA framebuffer = @emph{disable} (disable for text-mode graphics, enable for coreboot vesa framebuffer)
+@itemize
+@item
+Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time to enable coreboot framebuffer for a separate set of ROM images, in each system.
+@end itemize
+
+@item
+Generic Drivers / USB 2.0 EHCI debug dongle support = @emph{Enable}
+@item
+Generic Drivers / Enable early (pre-RAM) usbdebug = @emph{Enable}
+@item
+Generic Drivers / Type of dongle = @emph{Net20DC or compatible}
+@item
+Console / USB dongle console output = @emph{enable}
+@item
+Payload / Add a payload = @emph{An ELF executable payload}
+@item
+Payload / Payload path and filename = @emph{grub.elf}
+@end itemize
+
+Go back and disable option ROMs:
+
+@itemize
+@item
+Devices / Run VGA Option ROMs = @emph{disable}
+@item
+Devices / Run Option ROMs on PCI devices = @emph{disable}
+@end itemize
+
+The resulting .config file was saved as resources/libreboot/config/@strong{grub/t400_8mb/config} and resources/libreboot/config/@strong{grub/t400_4mb/config} and is used by the build scripts for this system.
+
+@node ThinkPad T500 configuration file resources/libreboot/config/grub/t500_4mb/config and resources/libreboot/config/grub/t500_8mb/config
+@subsection ThinkPad T500 configuration (file: resources/libreboot/config/grub/t500_4mb/config and resources/libreboot/config/grub/t500_8mb/config)
+@anchor{#thinkpad-t500-configuration-file-resourceslibrebootconfiggrubt500_4mbconfig-and-resourceslibrebootconfiggrubt500_8mbconfig}
+These are saved as two configs, because there are 2 size flash chips: 4MB or 8MB.
+
+@itemize
+@item
+General / Expert mode = @emph{enable}
+@item
+General / Use CMOS for configuration values = @emph{enable}
+@item
+Mainboard / Mainboard vendor = @emph{Lenovo}
+@item
+Mainboard / Mainboard model = @emph{ThinkPad T500}
+@item
+Mainboard / ROM chip size = @emph{4096 KB (4 MB)} or @emph{8192 KB (8 MB)} depending on flash chip size
+@item
+Chipset / Include CPU microcode in CBFS = @emph{Do not include microcode updates}
+@item
+Chipset / Size of CBFS filesystem in ROM = byte size @emph{0x7FD000} (for 8MB flash chip) or @emph{3FD000} (for 4MB flash chip)
+@item
+Devices / Use native graphics initialization = @emph{enable}
+@item
+Display / Keep VESA framebuffer = @emph{disable} (disable for text-mode graphics, enable for coreboot vesa framebuffer)
+@itemize
+@item
+Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time to enable coreboot framebuffer for a separate set of ROM images, in each system.
+@end itemize
+
+@item
+Generic Drivers / USB 2.0 EHCI debug dongle support = @emph{Enable}
+@item
+Generic Drivers / Enable early (pre-RAM) usbdebug = @emph{Enable}
+@item
+Generic Drivers / Type of dongle = @emph{Net20DC or compatible}
+@item
+Console / USB dongle console output = @emph{enable}
+@item
+Payload / Add a payload = @emph{An ELF executable payload}
+@item
+Payload / Payload path and filename = @emph{grub.elf}
+@end itemize
+
+Go back and disable option ROMs:
+
+@itemize
+@item
+Devices / Run VGA Option ROMs = @emph{disable}
+@item
+Devices / Run Option ROMs on PCI devices = @emph{disable}
+@end itemize
+
+The resulting .config file was saved as resources/libreboot/config/@strong{grub/t500_8mb/config} and resources/libreboot/config/@strong{grub/t500_4mb/config} and is used by the build scripts for this system.
+
+@node MacBook21 configuration file resources/libreboot/config/grub/macbook21/config
+@subsection MacBook2,1 configuration (file: resources/libreboot/config/grub/macbook21/config)
+@anchor{#macbook21-configuration-file-resourceslibrebootconfiggrubmacbook21config}
+@itemize
+@item
+General / Expert mode = @emph{enable}
+@item
+General / Local version string = @emph{"@ @ @ @ MB21.88Z.00A5.B07.0706270922"} (without the quotes)
+@item
+General / Use CMOS for configuration values = @emph{enable}
+@item
+Mainboard / Mainboard vendor = @emph{Apple}
+@item
+Mainboard / Mainboard model = @emph{Macbook2,1 ICH7 TESTING}
+@item
+Mainboard / ROM chip size = @emph{2048 KB (2 MB)}
+@item
+System tables / SMBIOS Serial Number = @emph{W8724XXXXXX}
+@item
+System tables / SMBIOS Version Number = @emph{1.0}
+@item
+System tables / SMBIOS Manufacturer = @emph{Apple Inc.}
+@item
+System tables / SMBIOS Product Name = @emph{MacBook2,1}
+@item
+Chipset / Include CPU microcode in CBFS = @emph{Do not include microcode updates}
+@item
+Devices / Use native graphics initialization = @emph{enable}
+@item
+Display / Keep VESA framebuffer = @emph{disable} (disable for text-mode graphics, enable for coreboot vesa framebuffer)
+@itemize
+@item
+Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time to enable coreboot framebuffer for a separate set of ROM images, in each system.
+@end itemize
+
+@item
+Generic Drivers / USB 2.0 EHCI debug dongle support = @emph{Enable}
+@item
+Generic Drivers / Enable early (pre-RAM) usbdebug = @emph{Enable}
+@item
+Generic Drivers / Type of dongle = @emph{}
+@item
+Console / USB dongle console output = @emph{enable}
+@item
+Payload / Add a payload = @emph{An ELF executable payload}
+@item
+Payload / Payload path and filename = @emph{grub.elf}
+@end itemize
+
+Go back and disable option ROMs:
+
+@itemize
+@item
+Devices / Run VGA Option ROMs = @emph{disable}
+@item
+Devices / Run Option ROMs on PCI devices = @emph{disable}
+@end itemize
+
+The resulting .config file was saved as resources/libreboot/config/@strong{grub/macbook21/config} and is used by the build scripts for this system. @strong{This config is also used for the MacBook1,1}.
+
+@node QEMU x86 i440fx/piix4 configuration file resources/libreboot/config/grub/qemu_i440fx_piix4/config
+@subsection QEMU (x86 i440fx/piix4) configuration (file: resources/libreboot/config/grub/qemu_i440fx_piix4/config)
+@anchor{#qemu-x86-i440fxpiix4-configuration-file-resourceslibrebootconfiggrubqemu_i440fx_piix4config}
+@itemize
+@item
+General / Expert mode = @emph{enable}
+@item
+Mainboard / Mainboard vendor = @emph{Emulation}
+@item
+Mainboard / Mainboard model = @emph{QEMU x86 i440fx/piix4 (aka qemu -M pc)}
+@item
+Mainboard / ROM chip size = @emph{8192 KB (8 MB)}
+@item
+Devices / Use native graphics initialization = @emph{enable} (should already be enabled)
+@item
+Display / Keep VESA framebuffer = @emph{enable} (disable for text-mode graphics, enable for coreboot vesa framebuffer)
+@itemize
+@item
+Libreboot provides this with framebuffer enabled by default, but it automatically patches a copy of the config at build time to enable coreboot text-mode for a separate set of ROM images, in each system.
+@end itemize
+
+@item
+Payload / Add a payload = @emph{An ELF executable payload}
+@item
+Payload / Payload path and filename = @emph{grub.elf}
+@end itemize
+
+Go back and disable option ROMs:
+
+@itemize
+@item
+Devices / Run VGA Option ROMs = @emph{disable}
+@item
+Devices / Run Option ROMs on PCI devices = @emph{disable}
+@end itemize
+
+The resulting .config file was saved as resources/libreboot/config/@strong{grub/qemu_i440fx_piix4/config} and is used by the build scripts for this system.
+
+@node QEMU x86 q35/ich9 configuration file resources/libreboot/config/grub/qemu_q35_ich9/config
+@subsection QEMU (x86 q35/ich9) configuration (file: resources/libreboot/config/grub/qemu_q35_ich9/config)
+@anchor{#qemu-x86-q35ich9-configuration-file-resourceslibrebootconfiggrubqemu_q35_ich9config}
+@itemize
+@item
+General / Expert mode = @emph{enable}
+@item
+Mainboard / Mainboard vendor = @emph{Emulation}
+@item
+Mainboard / Mainboard model = @emph{QEMU x86 q35/ich9 (aka qemu -M q35)}
+@item
+Mainboard / ROM chip size = @emph{8192 KB (8 MB)}
+@item
+Devices / Use native graphics initialization = @emph{enable} (should already be enabled)
+@item
+Display / Keep VESA framebuffer = @emph{enable} (disable for text-mode graphics, enable for coreboot vesa framebuffer)
+@itemize
+@item
+Libreboot provides this with framebuffer enabled by default, but it automatically patches a copy of the config at build time to enable coreboot text-mode for a separate set of ROM images, in each system.
+@end itemize
+
+@item
+Payload / Add a payload = @emph{An ELF executable payload}
+@item
+Payload / Payload path and filename = @emph{grub.elf}
+@end itemize
+
+Go back and disable option ROMs:
+
+@itemize
+@item
+Devices / Run VGA Option ROMs = @emph{disable}
+@item
+Devices / Run Option ROMs on PCI devices = @emph{disable}
+@end itemize
+
+The resulting .config file was saved as resources/libreboot/config/@strong{grub/qemu_q35_ich9/config} and is used by the build scripts for this system.
+
+@node Depthcharge payload
+@section Depthcharge payload
+@anchor{#depthcharge-payload}
+Depthcharge is one of the payloads that libreboot targets.
+
+Configurations are then saved as files called @strong{".config"}. Copies of each configuration used for each system type by the libreboot build scripts are stored in resources/libreboot/config/depthcharge/
+@menu
+* ASUS Chromebook C201 configuration file resources/libreboot/config/depthcharge/veyron_speedy/config::
+@end menu
+
+@node ASUS Chromebook C201 configuration file resources/libreboot/config/depthcharge/veyron_speedy/config
+@subsection ASUS Chromebook C201 configuration (file: resources/libreboot/config/depthcharge/veyron_speedy/config)
+@anchor{#asus-chromebook-c201-configuration-file-resourceslibrebootconfigdepthchargeveyron_speedyconfig}
+@itemize
+@item
+Mainboard / Mainboard vendor = @emph{Google}
+@item
+Mainboard / Mainboard model = @emph{Veyron_Speedy}
+@item
+Chipset / ChromeOS / Build for ChromeOS = @emph{enable}
+@item
+Chipset / ChromeOS / Verify firmware with vboot. = @emph{disable}
+@item
+Payload / Add a payload = @emph{An ELF executable payload}
+@item
+Payload / Payload path and filename = @emph{depthcharge.elf}
+@end itemize
+
+The resulting .config file was saved as resources/libreboot/config/@strong{depthcharge/veyron_speedy/config} and is used by the build scripts for this system.
+
+@ref{#pagetop,Back to top of page.}
+
+@node How to build the ROM images
+@chapter How to build the ROM images
+@anchor{#how-to-build-the-rom-images}
+You don't need to do much, as there are scripts already written for you that can build everything automatically.
+
+You can build libreboot from source on a 32-bit (i686) or 64-bit (x86_64) system. Recommended (if possible): x86_64. ASUS KFSN4-DRE has 64-bit CPUs. On a ThinkPad T60, you can replace the CPU (Core 2 Duo T5600, T7200 or T7600. T5600 recommended) for 64-bit support. On an X60s, you can replace the board with one that has a Core 2 Duo L7400 (you could also use an X60 Tablet board with the same CPU). On an X60, you can replace the board with one that has a Core 2 Duo T5600 or T7200 (T5600 is recommended). All MacBook2,1 laptops are 64-bit, as are all ThinkPad X200, X200S, X200 Tablet, R400, T400 and T500 laptops. Warning: MacBook1,1 laptops are all 32-bit only.
+
+First, @ref{#build_dependencies,install the build dependencies}.
+
+If you downloaded libreboot from git, refer to @ref{#build_meta,#build_meta}.
+
+Build all of the components used in libreboot:@* $ @strong{./build module all}
+
+You can also build each modules separately, using @emph{./build module modulename}. To see the possible values for @emph{modulename}, use:@* $ @strong{./build module list}
+
+After that, build the ROM images (for all boards):@* $ @strong{./build roms withgrub}@* Alternatively, you can build for a specific board or set of boards. For example:@* $ @strong{./build roms withgrub x60}@* $ @strong{./build roms withgrub x200_8mb}@* $ @strong{./build roms withgrub x60 x200_8mb}@* The list of board options can be found by looking at the directory names in @strong{resources/libreboot/config/grub/}.
+
+For those boards which use the depcharge payload, you must use: $ @strong{./build roms withdepthcharge}@* You can also build for a specific board or set of boards. For example:@* $ @strong{./build roms withdepthcharge veyron_speedy}
+
+To clean (reverse) everything, do the following:@* $ @strong{./build clean all}
+
+The ROM images will be stored under @strong{bin/@emph{payload}/}, where @emph{payload} could be @emph{grub}, @emph{depthcharge}, @emph{seabios}, or whatever other payload those images were built for.
+@menu
+* Preparing release archives optional::
+@end menu
+
+@node Preparing release archives optional
+@section Preparing release archives (optional)
+@anchor{#preparing-release-archives-optional}
+@strong{This is only confirmed to work (tested) in Trisquel 7. Parabola *fails* at this stage (for now). For all other distros, YMMV.}
+
+This is mainly intended for use with the git repository. These commands will work in the release archive (_src), unless otherwise noted below.
+
+The archives will appear under @emph{release/$@{version@}/}; $@{version@} will either be set using @emph{git describe} or, if a @emph{version} file already exists (_src release archive), then it will simply re-use that.
+
+Tag the current commit, and that version will appear in both the $@{version@} string on the directory under @emph{release/}, and in the file names of the archives. Otherwise, whatever git uses for @emph{git describe --tags HEAD} will be used.
+
+Utilities (static executables):@* $ @strong{./build release util}
+
+Archive containing flashrom and bucts source code:@* $ @strong{./build release tobuild}
+
+Documentation archive (@strong{does not work on _src release archive, only git}):@* $ @strong{./build release docs}
+
+ROM image archives:@* $ @strong{./build release roms}
+
+Source code archive:@* $ @strong{./build release src}
+
+SHA512 sums of all other release archives that have been generated:@* $ @strong{./build release sha512sums}
+
+If you are building on an i686 host, this will build statically linked 32-bit binaries in the binary release archive that you created, for: @strong{nvramtool, cbfstool, ich9deblob, cbmem}.
+
+If you are building on an x86_64 host, this will build statically linked 32- *and* 64-bit binaries for @strong{cbmem}, @strong{ich9deblob}, @strong{cbfstool} and @strong{nvramtool}.
+
+@strong{To include statically linked i686 and x86_64 binaries for bucts and flashrom, you will need to build them on a chroot, a virtual system or a real system where the host uses each given architecture. These packages are difficult to cross-compile, and the libreboot project is still figuring out how to deal with them.}
+
+The same applies if you want to include statically linked flashrom binaries for ARM.
+
+armv7l binaries (tested on a BeagleBone Black) are also included in libreboot_util, for:
+
+@itemize
+@item
+cbfstool
+@item
+ich9gen
+@item
+ich9deblob
+@item
+flashrom
+@end itemize
+
+If you are building binaries on a live system or chroot (for flashrom/bucts), you can use the following to statically link them:@* $ @strong{./build module flashrom static}@* $ @strong{./build module bucts static}
+
+The same conditions as above apply for ARM (except, building bucts on ARM is pointless, and for flashrom you only need the normal executable since the lenovobios_sst and _macronix executables are meant to run on an X60/T60 while lenovo bios is present, working around the security restrictions).
+
+The command that you used for generating the release archives will also run the following command:@* $ @strong{./build release tobuild}@* The archive @strong{tobuild.tar.xz} will have been created under @strong{release/}, containing bucts, flashrom and all other required resources for building them.
+
+You'll find that the files libreboot_util.tar.xz and libreboot_src.tar.xz have been created, under @strong{release/}.
+
+The ROM images will be stored in separate archives for each system, under @strong{release/rom/}.
+
+@ref{#pagetop,Back to top of page}
+
+Copyright © 2014, 2015 Francis Rowe <info@@gluglug.org.uk>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/gnulinux/configuring_parabola.texi b/docs/src/gnulinux/configuring_parabola.texi
new file mode 100644
index 0000000..ebef9e9
--- /dev/null
+++ b/docs/src/gnulinux/configuring_parabola.texi
@@ -0,0 +1,482 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title Configuring Parabola (post-install)
+@end titlepage
+
+@node Top
+@top Configuring Parabola (post-install)
+
+@menu
+* Configuring Parabola post-install::
+* Table of Contents::
+@end menu
+
+@node Configuring Parabola post-install
+@chapter Configuring Parabola (post-install)
+@anchor{#configuring-parabola-post-install}
+Post-installation configuration steps for Parabola GNU/Linux-libre. Parabola is extremely flexible; this is just an example.
+
+@uref{index.html,Back to previous index}
+
+@node Table of Contents
+@chapter Table of Contents
+@anchor{#table-of-contents}
+@itemize
+@item
+@ref{#pacman_configure,Configuring pacman}
+@itemize
+@item
+@ref{#pacman_update,Updating Parabola}
+@item
+@ref{#pacman_maintain,Maintaining Parabola during system updates}
+@itemize
+@item
+@ref{#pacman_cacheclean,Clearing package cache after updating}
+@item
+@ref{#pacman_commandequiv,Pacman command equivalents (compared to other package managers)}
+@end itemize
+
+@item
+@ref{#yourfreedom,your-freedom}
+@end itemize
+
+@item
+@ref{#useradd,Add a user account}
+@item
+@ref{#systemd,System D}
+@item
+@ref{#interesting_repos,Interesting repositories}
+@item
+@ref{#network,Setup a network connection in Parabola}
+@itemize
+@item
+@ref{#network_hostname,Setting hostname}
+@item
+@ref{#network_status,Network status}
+@item
+@ref{#network_devicenames,Network interface names}
+@item
+@ref{#network_setup,Network setup}
+@end itemize
+
+@item
+@ref{#system_maintain,System maintenance} - important!
+@item
+@ref{#desktop,Configuring the desktop}
+@itemize
+@item
+@ref{#desktop_xorg,Install Xorg}
+@item
+@ref{#desktop_kblayout,Xorg keyboard layout}
+@item
+@ref{#desktop_lxde,Install LXDE}
+@item
+@ref{#lxde_clock,LXDE - clock}
+@item
+@ref{#lxde_font,LXDE - font}
+@item
+@ref{#lxde_screenlock,LXDE - screenlock}
+@item
+@ref{#lxde_automount,LXDE - automounting}
+@item
+@ref{#lxde_suspend,LXDE - disable suspend}
+@item
+@ref{#lxde_battery,LXDE - battery monitor}
+@item
+@ref{#lxde_network,LXDE - network manager}
+@end itemize
+
+@end itemize
+
+While not strictly related to the libreboot project, this guide is intended to be useful for those interested in installing Parabola on their libreboot system.
+
+It details configuration steps that I took after installing the base system, as a follow up to @uref{encrypted_parabola.html,encrypted_parabola.html}. This guide is likely to become obsolete at a later date (due to the volatile 'rolling-release' model that Arch/Parabola both use), but attempts will be made to maintain it.
+
+@strong{This guide was valid on 2014-09-21. If you see any changes that should to be made at the present date, please get in touch with the libreboot project!}
+
+You do not necessarily have to follow this guide word-for-word; @emph{parabola} is extremely flexible. The aim here is to provide a common setup that most users will be happy with. While Parabola can seem daunting at first glance (especially for new GNU/Linux users), with a simple guide it can provide all the same usability as Trisquel, without hiding any details from the user.
+
+Paradoxically, as you get more advanced Parabola can actually become @emph{easier to use} when you want to set up your system in a special way compared to what most distributions provide. You will find over time that other distributions tend to @emph{get in your way}.
+
+@strong{This guide assumes that you already have Parabola installed. If you have not yet installed Parabola, then @uref{encrypted_parabola.html,this guide} is highly recommended!}
+
+A lot of the steps in this guide will refer to the Arch wiki. Arch is the upstream distribution that Parabola uses. Most of this guide will also tell you to read wiki articles, other pages, manuals, and so on. In general it tries to cherry pick the most useful information but nonetheless you are encouraged to learn as much as possible. @strong{It might take you a few days to fully install your system how you like, depending on how much you need to read. Patience is key, especially for new users}.
+
+The Arch wiki will sometimes use bad language, such as calling the whole system Linux, using the term open-source (or closed-source), and it will sometimes recommend the use of proprietary software. You need to be careful about this when reading anything on the Arch wiki.
+
+Some of these steps require internet access. I'll go into networking later but for now, I just connected my system to a switch and did:@* # @strong{systemctl start dhcpcd.service}@* You can stop it later by running:@* # @strong{systemctl stop dhcpcd.service}@* For most people this should be enough, but if you don't have DHCP on your network then you should setup your network connection first:@* @ref{#network,Setup network connection in Parabola}
+@menu
+* Configure pacman::
+* Updating Parabola::
+* Maintaining Parabola::
+* your-freedom::
+* Add a user::
+* systemd::
+* Interesting repositories::
+* Setup a network connection in Parabola::
+* System Maintenance::
+* Configuring the desktop::
+@end menu
+
+@node Configure pacman
+@section Configure pacman
+@anchor{#configure-pacman}
+pacman (@strong{pac}kage @strong{man}ager) is the name of the package management system in Arch, which Parabola (as a deblobbed parallel effort) also uses. Like with 'apt-get' on debian-based systems like Trisquel, this can be used to add/remove and update the software on your computer.
+
+Based on @uref{https://wiki.parabolagnulinux.org/Installation_Guide#Configure_pacman,https://wiki.parabolagnulinux.org/Installation_Guide#Configure_pacman} and from reading @uref{https://wiki.archlinux.org/index.php/Pacman,https://wiki.archlinux.org/index.php/Pacman} (make sure to read and understand this, it's very important) and @uref{https://wiki.parabolagnulinux.org/Official_Repositories,https://wiki.parabolagnulinux.org/Official_Repositories}
+
+@ref{#pagetop,Back to top of page.}
+
+@node Updating Parabola
+@section Updating Parabola
+@anchor{#updating-parabola}
+In the end, I didn't change my configuration for pacman. When you are updating, resync with the latest package names/versions:@* # @strong{pacman -Syy}@* (according to the wiki, -Syy is better than Sy because it refreshes the package list even if it appears to be up to date, which can be useful when switching to another mirror).@* Then, update the system:@* # @strong{pacman -Syu}
+
+@strong{Before installing packages with 'pacman -S', always update first, using the notes above.}
+
+Keep an eye out on the output, or read it in /var/log/pacman.log. Sometimes, pacman will show messages about maintenance steps that you will need to perform with certain files (typically configurations) after the update. Also, you should check both the Parabola and Arch home pages to see if they mention any issues. If a new kernel is installed, you should also update to be able to use it (the currently running kernel will also be fine). It's generally good enough to update Parabola once every week, or maybe twice. As a rolling release distribution, it's a good idea never to leave your install too outdated; update regularly. This is simply because of the way the project works; old packages are deleted from the repositories quickly, once they are updated. A system that hasn't been updated for quite a while will mean potentially more reading of previous posts through the website, and more maintenance work.
+
+The Arch forum can also be useful, if others have the same issue as you (if you encounter issues, that is). The @emph{Parabola} IRC channel (#parabola on freenode) can also help you.
+
+Due to this and the volatile nature of Parabola/Arch, you should only update when you have at least a couple hours of spare time in case of issues that need to be resolved. You should never update, for example, if you need your system for an important event, like a presentation or sending an email to an important person before an allocated deadline, and so on.
+
+Relax - packages are well-tested regularly when new updates are made to the repositories. Separate 'testing' repositories exist for this exact reason. Despite what many people will tell you, Parabola is fairly stable and trouble-free, so long as you are aware of how to check for issues, and are willing to spend some time fixing issues in the rare event that they do occur.
+
+@ref{#pagetop,Back to top of page.}
+
+@node Maintaining Parabola
+@section Maintaining Parabola
+@anchor{#maintaining-parabola}
+Parabola is a very simple distro, in the sense that you are in full control and everything is made transparent to you. One consequence is that you also need to know what you are doing, and what you have done before. In general, keeping notes (such as what I have done with this page) can be very useful as a reference in the future (if you wanted to re-install it or install the distro on another computer, for example).
+
+@ref{#pagetop,Back to top of page.}
+@menu
+* Cleaning the package cache::
+* pacman command equivalents::
+@end menu
+
+@node Cleaning the package cache
+@subsection Cleaning the package cache
+@anchor{#cleaning-the-package-cache}
+@strong{The following is very important as you continue to use, update and maintain your Parabola system:@* @uref{https://wiki.archlinux.org/index.php/Pacman#Cleaning_the_package_cache,https://wiki.archlinux.org/index.php/Pacman#Cleaning_the_package_cache}. Essentially, this guide talks about a directory that has to be cleaned once in a while, to prevent it from growing too big (it's a cache of old package information, updated automatically when you do anything in pacman).}
+
+To clean out all old packages that are cached:@* # @strong{pacman -Sc}
+
+The wiki cautions that this should be used with care. For example, since older packages are deleted from the repo, if you encounter issues and want to revert back to an older package then it's useful to have the caches available. Only do this if you are sure that you won't need it.
+
+The wiki also mentions this method for removing everything from the cache, including currently installed packages that are cached:@* # @strong{pacman -Scc}@* This is inadvisable, since it means re-downloading the package again if you wanted to quickly re-install it. This should only be used when disk space is at a premium.
+
+@ref{#pagetop,Back to top of page.}
+
+@node pacman command equivalents
+@subsection pacman command equivalents
+@anchor{#pacman-command-equivalents}
+The following table lists other distro package manager commands, and their equivalent in pacman:@* @uref{https://wiki.archlinux.org/index.php/Pacman_Rosetta,https://wiki.archlinux.org/index.php/Pacman_Rosetta}
+
+@ref{#pagetop,Back to top of page.}
+
+@node your-freedom
+@section your-freedom
+@anchor{#your-freedom}
+your-freedom is a package specific to Parabola, and it is installed by default. What it does is conflict with packages from Arch that are known to be non-free (proprietary) software. When migrating from Arch (there is a guide on the Parabola wiki for migrating - converting - an existing Arch system to a Parabola system), installing your-freedom will also fail if these packages are installed, citing them as conflicts; the recommended solution is then to delete the offending packages, and continue installing @emph{your-freedom}.
+
+@ref{#pagetop,Back to top of page.}
+
+@node Add a user
+@section Add a user
+@anchor{#add-a-user}
+Based on @uref{https://wiki.archlinux.org/index.php/Users_and_Groups,https://wiki.archlinux.org/index.php/Users_and_Groups}.
+
+It is important (for security reasons) to create and use a non-root (non-admin) user account for everyday use. The default 'root' account is intended only for critical administrative work, since it has complete access to the entire operating system.
+
+Read the entire document linked to above, and then continue.
+
+Add your user:@* # @strong{useradd -m -G wheel -s /bin/bash @emph{yourusername}}@* Set a password:@* # @strong{passwd @emph{yourusername}}
+
+Use of the @emph{diceware method} is recommended, for generating secure passphrases (instead of passwords).
+
+@ref{#pagetop,Back to top of page}
+
+@node systemd
+@section systemd
+@anchor{#systemd}
+This is the name of the system used for managing services in Parabola. It is a good idea to become familiar with it. Read @uref{https://wiki.archlinux.org/index.php/systemd,https://wiki.archlinux.org/index.php/systemd} and @uref{https://wiki.archlinux.org/index.php/systemd#Basic_systemctl_usage,https://wiki.archlinux.org/index.php/systemd#Basic_systemctl_usage} to gain a full understanding. @strong{This is very important! Make sure to read them.}
+
+An example of a 'service' could be a webserver (such as lighttpd), or sshd (openssh), dhcp, etc. There are countless others.
+
+@uref{https://bbs.archlinux.org/viewtopic.php?pid=1149530#p1149530,https://bbs.archlinux.org/viewtopic.php?pid=1149530#p1149530} explains the background behind the decision by Arch (Parabola's upstream supplier) to use systemd.
+
+The manpage should also help:@* # @strong{man systemd}@* The section on 'unit types' is especially useful.
+
+According to the wiki, systemd 'journal' keeps logs of a size up to 10% of the total size your / partition takes up. on a 60GB root this would mean 6GB. That's not exactly practical, and can have performance implications later when the log gets too big. Based on instructions from the wiki, I will reduce the total size of the journal to 50MiB (the wiki recommends 50MiB).
+
+Open /etc/systemd/journald.conf and find the line that says:@* @emph{#SystemMaxUse=}@* Change it to say:@* @emph{SystemMaxUse=50M}
+
+The wiki also recommended a method for forwarding journal output to TTY 12 (accessible by pressing ctrl+alt+f12, and you use ctrl+alt+[F1-F12] to switch between terminals). I decided not to enable it.
+
+Restart journald:@* # @strong{systemctl restart systemd-journald}
+
+The wiki recommends that if the journal gets too large, you can also simply delete (rm -Rf) everything inside /var/log/journald/* but recommends backing it up. This shouldn't be necessary, since you already set the size limit above and systemd will automatically start to delete older records when the journal size reaches it's limit (according to systemd developers).
+
+Finally, the wiki mentions 'temporary' files and the utility for managing them.@* # @strong{man systemd-tmpfiles}@* The command for 'clean' is:@* # @strong{systemd-tmpfiles --clean}@* According to the manpage, this @emph{"cleans all files and directories with an age parameter"}. According to the Arch wiki, this reads information in /etc/tmpfiles.d/ and /usr/lib/tmpfiles.d/ to know what actions to perform. Therefore, it is a good idea to read what's stored in these locations to get a better understanding.
+
+I looked in /etc/tmpfiles.d/ and found that it was empty on my system. However, /usr/lib/tmpfiles.d/ contained some files. The first one was etc.conf, containing information and a reference to this manpage:@* # @strong{man tmpfiles.d}@* Read that manpage, and then continue studying all the files.
+
+The systemd developers tell me that it isn't usually necessary to touch the systemd-tmpfiles utility manually at all.
+
+@ref{#pagetop,Back to top of page}
+
+@node Interesting repositories
+@section Interesting repositories
+@anchor{#interesting-repositories}
+Parabola wiki at @uref{https://wiki.parabolagnulinux.org/Repositories#kernels,https://wiki.parabolagnulinux.org/Repositories#kernels} mentions about a repository called [kernels] for custom kernels that aren't in the default base. It might be worth looking into what is available there, depending on your use case.
+
+I enabled it on my system, to see what was in it. Edit /etc/pacman.conf and below the 'extra' section add:@* @emph{[kernels]@* Include = /etc/pacman.d/mirrorlist}
+
+Now sync with the repository:@* # @strong{pacman -Syy}
+
+List all available packages in this repository:@* # @strong{pacman -Sl kernels}
+
+In the end, I decided not to install anything from it but I kept the repository enabled regardless.
+
+@ref{#pagetop,Back to top of page.}
+
+@node Setup a network connection in Parabola
+@section Setup a network connection in Parabola
+@anchor{#setup-a-network-connection-in-parabola}
+Read @uref{https://wiki.archlinux.org/index.php/Configuring_Network,https://wiki.archlinux.org/index.php/Configuring_Network}.
+
+@ref{#pagetop,Back to top of page.}
+@menu
+* Set the hostname::
+* Network Status::
+* Network device names::
+* Network setup::
+@end menu
+
+@node Set the hostname
+@subsection Set the hostname
+@anchor{#set-the-hostname}
+This should be the same as the hostname that you set in /etc/hostname when installing Parabola. You can also do it with systemd (do so now, if you like):@* # @strong{hostnamectl set-hostname @emph{yourhostname}}@* This writes the specified hostname to /etc/hostname. More information can be found in these manpages:@* # @strong{man hostname}@* # @strong{info hostname}@* # @strong{man hostnamectl}
+
+Add the same hostname to /etc/hosts, on each line. Example:@* @emph{127.0.0.1 localhost.localdomain localhost myhostname@* ::1 localhost.localdomain localhost myhostname}
+
+You'll note that I set both lines; the 2nd line is for IPv6. More and more ISPs are providing this now (mine does) so it's good to be forward-thinking here.
+
+The @emph{hostname} utility is part of the @emph{inetutils} package and is in core/, installed by default (as part of @emph{base}).
+
+@ref{#pagetop,Back to top of page.}
+
+@node Network Status
+@subsection Network Status
+@anchor{#network-status}
+According to the Arch wiki, @uref{https://wiki.archlinux.org/index.php/Udev,udev} should already detect the ethernet chipset and load the driver for it automatically at boot time. You can check this in the @emph{"Ethernet controller"} section when running this command:@* # @strong{lspci -v}
+
+Look at the remaining sections @emph{'Kernel driver in use'} and @emph{'Kernel modules'}. In my case it was as follows:@* @emph{Kernel driver in use: e1000e@* Kernel modules: e1000e}
+
+Check that the driver was loaded by issuing @emph{dmesg | grep module_name}. In my case, I did:@* # @strong{dmesg | grep e1000e}
+
+@node Network device names
+@subsection Network device names
+@anchor{#network-device-names}
+According to @uref{https://wiki.archlinux.org/index.php/Configuring_Network#Device_names,https://wiki.archlinux.org/index.php/Configuring_Network#Device_names}, it is important to note that the old interface names like eth0, wlan0, wwan0 and so on no longer apply. Instead, @emph{systemd} creates device names starting with en (for enternet), wl (for wifi) and ww (for wwan) with a fixed identifier that systemd automatically generates. An example device name for your ethernet chipset would be @emph{enp0s25}, where it is never supposed to change.
+
+If you want to enable the old names (eth0, wlan0, wwan0, etc), the Arch wiki recommends adding @emph{net.ifnames=0} to your kernel parameters (in libreboot context, this would be accomplished by following the instructions in @uref{grub_cbfs.html,grub_cbfs.html}).
+
+For background information, read @uref{http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames/,Predictable Network Interface Names}
+
+Show device names:@* # @strong{ls /sys/class/net}
+
+Changing the device names is possible (I chose not to do it):@* @uref{https://wiki.archlinux.org/index.php/Configuring_Network#Change_device_name,https://wiki.archlinux.org/index.php/Configuring_Network#Change_device_name}
+
+@ref{#pagetop,Back to top of page.}
+
+@node Network setup
+@subsection Network setup
+@anchor{#network-setup}
+I actually chose to ignore most of Networking section on the wiki. Instead, I plan to set up LXDE desktop with the graphical network-manager client. Here is a list of network managers:@* @uref{https://wiki.archlinux.org/index.php/List_of_applications/Internet#Network_managers,https://wiki.archlinux.org/index.php/List_of_applications/Internet#Network_managers}. If you need to, set a static IP address (temporarily) using the networking guide and the Arch wiki, or start the dhcpcd service in systemd. NetworkManager will be setup later, after installing LXDE.
+
+@ref{#pagetop,Back to top of page.}
+
+@node System Maintenance
+@section System Maintenance
+@anchor{#system-maintenance}
+Read @uref{https://wiki.archlinux.org/index.php/System_maintenance,https://wiki.archlinux.org/index.php/System_maintenance} before continuing. Also read @uref{https://wiki.archlinux.org/index.php/Enhance_system_stability,https://wiki.archlinux.org/index.php/Enhance_system_stability}. @strong{This is important, so make sure to read them!}
+
+Install smartmontools (it can be used to check smart data. HDDs use non-free firmware inside, but it's transparent to you but the smart data comes from it. Therefore, don't rely on it too much):@* # @strong{pacman -S smartmontools}@* Read @uref{https://wiki.archlinux.org/index.php/S.M.A.R.T.,https://wiki.archlinux.org/index.php/S.M.A.R.T.} to learn how to use it.
+
+@ref{#pagetop,Back to top of page.}
+
+@node Configuring the desktop
+@section Configuring the desktop
+@anchor{#configuring-the-desktop}
+Based on steps from @uref{https://wiki.archlinux.org/index.php/General_recommendations#Graphical_user_interface,General Recommendations} on the Arch wiki. The plan is to use LXDE and LXDM/LightDM, along with everything else that you would expect on other distributions that provide LXDE by default.
+
+@ref{#pagetop,Back to top of page.}
+@menu
+* Installing Xorg::
+* Xorg keyboard layout::
+* Install LXDE::
+* LXDE - clock::
+* LXDE - font::
+* LXDE - screenlock::
+* LXDE - automounting::
+* LXDE - disable suspend::
+* LXDE - battery monitor::
+* LXDE - Network Manager::
+@end menu
+
+@node Installing Xorg
+@subsection Installing Xorg
+@anchor{#installing-xorg}
+Based on @uref{https://wiki.archlinux.org/index.php/Xorg,https://wiki.archlinux.org/index.php/Xorg}.
+
+Firstly, install it!@* # @strong{pacman -S xorg-server}@* I also recommend installing this (contains lots of useful tools, including @emph{xrandr}):@* # @strong{pacman -S xorg-server-utils}
+
+Install the driver. For me this was @emph{xf86-video-intel} on the ThinkPad X60. T60 and macbook11/21 should be the same.@* # @strong{pacman -S xf86-video-intel}@* For other systems you can try:@* # @strong{pacman -Ss xf86-video- | less}@* Combined with looking at your @emph{lspci} output, you can determine which driver is needed. By default, Xorg will revert to xf86-video-vesa which is a generic driver and doesn't provide true hardware acceleration.
+
+Other drivers (not just video) can be found by looking at the @emph{xorg-drivers} group:@* # @strong{pacman -Sg xorg-drivers}@*
+
+Mostly you will rely on a display manager, but in case you ever want to start X without one:@* # @strong{pacman -S xorg-xinit}
+
+<optional>@* @ @ @ Arch wiki recommends installing these, for testing that X works:@* @ @ @ # @strong{pacman -S xorg-twm xorg-xclock xterm}@* @ @ @ Refer to @uref{https://wiki.archlinux.org/index.php/Xinitrc,https://wiki.archlinux.org/index.php/Xinitrc}. and test X:@* @ @ @ # @strong{startx}@* @ @ @ When you are satisfied, type @strong{@emph{exit}} in xterm, inside the X session.@* @ @ @ Uninstall them (clutter. eww): # @strong{pacman -S xorg-xinit xorg-twm xorg-xclock xterm}@* </optional>
+
+@ref{#pagetop,Back to top of page.}
+
+@node Xorg keyboard layout
+@subsection Xorg keyboard layout
+@anchor{#xorg-keyboard-layout}
+Refer to @uref{https://wiki.archlinux.org/index.php/Keyboard_configuration_in_Xorg,https://wiki.archlinux.org/index.php/Keyboard_configuration_in_Xorg}.
+
+Xorg uses a different configuration method for keyboard layouts, so you will notice that the layout you set in /etc/vconsole.conf earlier might not actually be the same in X.
+
+To see what layout you currently use, try this on a terminal emulator in X:@* # @strong{setxkbmap -print -verbose 10}
+
+In my case, I wanted to use the Dvorak (UK) keyboard which is quite different from Xorg's default Qwerty (US) layout.
+
+I'll just say it now: @emph{XkbModel} can be @emph{pc105} in this case (ThinkPad X60, with a 105-key UK keyboard). If you use an American keyboard (typically 104 keys) you will want to use @emph{pc104}.
+
+@emph{XkbLayout} in my case would be @emph{gb}, and @emph{XkbVariant} would be @emph{dvorak}.
+
+The Arch wiki recommends two different methods for setting the keyboard layout:@* @uref{https://wiki.archlinux.org/index.php/Keyboard_configuration_in_Xorg#Using_X_configuration_files,https://wiki.archlinux.org/index.php/Keyboard_configuration_in_Xorg#Using_X_configuration_files} and@* @uref{https://wiki.archlinux.org/index.php/Keyboard_configuration_in_Xorg#Using_localectl,https://wiki.archlinux.org/index.php/Keyboard_configuration_in_Xorg#Using_localectl}.
+
+In my case, I chose to use the @emph{configuration file} method:@* Create the file /etc/X11/xorg.conf.d/10-keyboard.conf and put this inside:@* @emph{Section "InputClass"@* @ @ @ @ @ @ @ @ Identifier "system-keyboard"@* @ @ @ @ @ @ @ @ MatchIsKeyboard "on"@* @ @ @ @ @ @ @ @ Option "XkbLayout" "gb"@* @ @ @ @ @ @ @ @ Option "XkbModel" "pc105"@* @ @ @ @ @ @ @ @ Option "XkbVariant" "dvorak"@* EndSection}
+
+For you, the steps above may differ if you have a different layout. If you use a US Qwerty keyboard, then you don't even need to do anything (though it might help, for the sake of being explicit).
+
+@ref{#pagetop,Back to top of page.}
+
+@node Install LXDE
+@subsection Install LXDE
+@anchor{#install-lxde}
+Desktop choice isn't that important to me, so for simplicity I decided to use LXDE. It's lightweight and does everything that I need. If you would like to try something different, refer to @uref{https://wiki.archlinux.org/index.php/Desktop_environment,https://wiki.archlinux.org/index.php/Desktop_environment}
+
+Refer to @uref{https://wiki.archlinux.org/index.php/LXDE,https://wiki.archlinux.org/index.php/LXDE}.
+
+Install it, choosing 'all' when asked for the default package list:@* # @strong{pacman -S lxde obconf}
+
+I didn't want the following, so I removed them:@* # @strong{pacman -R lxmusic lxtask}
+
+I also lazily installed all fonts:@* # @strong{pacman -S $(pacman -Ssq ttf-)}
+
+LXDE comes with a terminal. You probably want a browser to go with that; I choose GNU IceCat, part of the @emph{@uref{https://gnu.org/,GNU project}}:@* # @strong{pacman -S icecat}@* And a mail client:@* # @strong{pacman -S icedove}
+
+In IceCat, go to @emph{Preferences :: Advanced} and disable @emph{GNU IceCat Health Report}.
+
+I also like to install these:@* # @strong{pacman -S xsensors stress htop}
+
+Enable LXDM (the default display manager, providing a graphical login):@* # @strong{systemctl enable lxdm.service}@* It will start when you boot up the system. To start it now, do:@* # @strong{systemctl start lxdm.service}
+
+Log in with your standard (non-root) user that you created earlier. It is advisable to also create an xinitrc rule in case you ever want to start lxde without lxdm. Read @uref{https://wiki.archlinux.org/index.php/Xinitrc,https://wiki.archlinux.org/index.php/Xinitrc}.
+
+Open LXterminal:@* $ @strong{cp /etc/skel/.xinitrc ~}@* Open .xinitrc and add the following plus a line break at the bottom of the file.@* @emph{# Probably not needed. The same locale info that we set before@* # Based on advice from the LXDE wiki export LC_ALL=en_GB.UTF-8@* export LANGUAGE=en_GB.UTF-8@* export LANG=en_GB.UTF-8@* @* # Start lxde desktop@* exec startlxde@*} Now make sure that it is executable:@* $ @strong{chmod +x .xinitrc}
+
+@ref{#pagetop,Back to top of page.}
+
+@node LXDE - clock
+@subsection LXDE - clock
+@anchor{#lxde---clock}
+In @strong{Digital Clock Settings} (right click the clock) I set the Clock Format to @emph{%Y/%m/%d %H:%M:%S}
+
+@ref{#pagetop,Back to top of page.}
+
+@node LXDE - font
+@subsection LXDE - font
+@anchor{#lxde---font}
+NOTE TO SELF: come back to this later.
+
+@ref{#pagetop,Back to top of page.}
+
+@node LXDE - screenlock
+@subsection LXDE - screenlock
+@anchor{#lxde---screenlock}
+Arch wiki recommends to use @emph{xscreensaver}:@* # @strong{pacman -S xscreensaver}
+
+Under @emph{Preferences :: Screensaver} in the LXDE menu, I chose @emph{Mode: Blank Screen Only}, setting @emph{Blank After}, @emph{Cycle After} and @emph{Lock Screen After} (checked) to 10 minutes.
+
+You can now lock the screen with @emph{Logout :: Lock Screen} in the LXDE menu.
+
+@ref{#pagetop,Back to top of page.}
+
+@node LXDE - automounting
+@subsection LXDE - automounting
+@anchor{#lxde---automounting}
+Refer to @uref{https://wiki.archlinux.org/index.php/File_manager_functionality,https://wiki.archlinux.org/index.php/File_manager_functionality}.
+
+I chose to ignore this for now. NOTE TO SELF: come back to this later.
+
+@ref{#pagetop,Back to top of page.}
+
+@node LXDE - disable suspend
+@subsection LXDE - disable suspend
+@anchor{#lxde---disable-suspend}
+When closing the laptop lid, the system suspends. This is annoying at least to me. NOTE TO SELF: disable it, then document the steps here.
+
+@ref{#pagetop,Back to top of page.}
+
+@node LXDE - battery monitor
+@subsection LXDE - battery monitor
+@anchor{#lxde---battery-monitor}
+Right click lxde panel and @emph{Add/Remove Panel Items}. Click @emph{Add} and select @emph{Battery Monitor}, then click @emph{Add}. Close and then right-click the applet and go to @emph{Battery Monitor Settings}, check the box that says @emph{Show Extended Information}. Now click @emph{Close}. When you hover the cursor over it, it'll show information about the battery.
+
+@ref{#pagetop,Back to top of page.}
+
+@node LXDE - Network Manager
+@subsection LXDE - Network Manager
+@anchor{#lxde---network-manager}
+Refer to @uref{https://wiki.archlinux.org/index.php/LXDE#Network_Management,https://wiki.archlinux.org/index.php/LXDE#Network_Management}. Then I read: @uref{https://wiki.archlinux.org/index.php/NetworkManager,https://wiki.archlinux.org/index.php/NetworkManager}.
+
+Install Network Manager:@* # @strong{pacman -S networkmanager}
+
+You will also want the graphical applet:@* # @strong{pacman -S network-manager-applet}@* Arch wiki says that an autostart rule will be written at @emph{/etc/xdg/autostart/nm-applet.desktop}
+
+I want to be able to use a VPN at some point, so the wiki tells me to do:@* # @strong{pacman -S networkmanager-openvpn}
+
+LXDE uses openbox, so I refer to:@* @uref{https://wiki.archlinux.org/index.php/NetworkManager#Openbox,https://wiki.archlinux.org/index.php/NetworkManager#Openbox}.
+
+It tells me for the applet I need:@* # @strong{pacman -S xfce4-notifyd gnome-icon-theme}@* Also, for storing authentication details (wifi) I need:@* # @strong{pacman -S gnome-keyring}
+
+I wanted to quickly enable networkmanager:@* # @strong{systemctl stop dhcpcd}@* # @strong{systemctl start NetworkManager}@* Enable NetworkManager at boot time:@* # @strong{systemctl enable NetworkManager}
+
+Restart LXDE (log out, and then log back in).
+
+I added the volume control applet to the panel (right click panel, and add a new applet). I also later changed the icons to use the gnome icon theme, in @emph{lxappearance}.
+
+@ref{#pagetop,Back to top of page.}
+
+Copyright © 2014, 2015 Francis Rowe <info@@gluglug.org.uk>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/gnulinux/encrypted_parabola.texi b/docs/src/gnulinux/encrypted_parabola.texi
new file mode 100644
index 0000000..83d5ac4
--- /dev/null
+++ b/docs/src/gnulinux/encrypted_parabola.texi
@@ -0,0 +1,414 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title Installing Parabola GNU/Linux with full disk encryption (including /boot)
+@end titlepage
+
+@node Top
+@top Installing Parabola GNU/Linux with full disk encryption (including /boot)
+
+@menu
+* Installing Parabola GNU/Linux with full disk encryption including /boot::
+* Troubleshooting::
+@end menu
+
+@node Installing Parabola GNU/Linux with full disk encryption including /boot
+@chapter Installing Parabola GNU/Linux with full disk encryption (including /boot)
+@anchor{#installing-parabola-gnulinux-with-full-disk-encryption-including-boot}
+Libreboot on x86 uses the GRUB @uref{http://www.coreboot.org/Payloads#GRUB_2,payload} by default, which means that the GRUB configuration file (where your GRUB menu comes from) is stored directly alongside libreboot and it's GRUB payload executable, inside the flash chip. In context, this means that installing distributions and managing them is handled slightly differently compared to traditional BIOS systems.
+
+On most systems, the /boot partition has to be left unencrypted while the others are encrypted. This is so that GRUB, and therefore the kernel, can be loaded and executed since the firmware can't open a LUKS volume. Not so with libreboot! Since GRUB is already included directly as a payload, even /boot can be encrypted. This protects /boot from tampering by someone with physical access to the system.
+
+@strong{This guide is *only* for the GRUB payload. If you use the depthcharge payload, ignore this section entirely.}
+
+@uref{index.html,Back to previous index}
+
+Boot Parabola's install environment. @uref{grub_boot_installer.html,How to boot a GNU/Linux installer}.
+
+For this guide I used the 2015 08 01 image to boot the live installer and install the system. This is available at @uref{https://wiki.parabola.nu/Get_Parabola#Main_live_ISO,this page}.
+
+This guide will go through the installation steps taken at the time of writing, which may or may not change due to the volatile nature of Parabola (it changes all the time). In general most of it should remain the same. If you spot mistakes, please say so! This guide will be ported to the Parabola wiki at a later date. For up to date Parabola install guide, go to the Parabola wiki. This guide essentially cherry picks the useful information (valid at the time of writing: 2015-08-25).
+
+This section deals with wiping the storage device on which you plan to install Parabola GNU/Linux. Follow these steps, but if you use an SSD, also:
+
+- beware there are issues with TRIM (not enabled through luks) and security issues if you do enable it. See @uref{https://wiki.archlinux.org/index.php/Dm-crypt/Specialties#Discard.2FTRIM_support_for_solid_state_drives_.28SSD.29,this page} for more info.
+
+- make sure it's brand-new (or barely used). Or, otherwise, be sure that it never previously contained plaintext copies of your data.
+
+- make sure to read @uref{https://wiki.archlinux.org/index.php/Solid_State_Drives,this article}. Edit /etc/fstab later on when chrooted into your install. Also, read the whole article and keep all points in mind, adapting them for this guide.
+
+Wipe the MBR (if you use MBR):@* # @strong{lsblk}@* Your storage is probably /dev/sda, but be very sure to double check this or you WILL lose your data!@* # @strong{dd if=/dev/zero of=/dev/sda bs=446 count=1; sync}@* Never use SeaBIOS! The MBR section can easily be changed with malicious code, which SeaBIOS will blindly execute. This guide is for libreboot with GRUB-as-payload only.
+
+Securely wipe the drive:@* # @strong{dd if=/dev/urandom of=/dev/sda; sync}@* NOTE: If you have an SSD, only do this the first time. If it was already LUKS-encrypted before, use the info below to wipe the LUKS header. Also, check online for your SSD what the recommended erase block size is. For example if it was 2MiB:@* # @strong{dd if=/dev/urandom of=/dev/sda bs=2M; sync}
+
+If your drive was already LUKS encrypted (maybe you are re-installing your distro) then it is already 'wiped'. You should just wipe the LUKS header. @uref{https://www.lisenet.com/2013/luks-add-keys-backup-and-restore-volume-header/,https://www.lisenet.com/2013/luks-add-keys-backup-and-restore-volume-header/} showed me how to do this. It recommends doing the first 3MiB. Now, that guide is recommending putting zero there. I'm going to use urandom. Do this:@* # @strong{head -c 3145728 /dev/urandom > /dev/sda; sync}@* (Wiping the LUKS header is important, since it has hashed passphrases and so on. It's 'secure', but 'potentially' a risk).
+@menu
+* Change keyboard layout::
+* Establish an internet connection::
+* Getting started::
+* dm-mod::
+* Create LUKS partition::
+* Create LVM::
+* Create / and swap partitions and mount::
+* Continue with Parabola installation::
+* Configure the system::
+* Extra security tweaks::
+* Unmount reboot!::
+* Booting from GRUB::
+* Follow-up tutorial configuring Parabola::
+* Modify grubcfg inside the ROM::
+* Bonus Using a key file to unlock /boot/::
+* Further security tips::
+@end menu
+
+@node Change keyboard layout
+@section Change keyboard layout
+@anchor{#change-keyboard-layout}
+Parabola live shell assumes US Qwerty. If you have something different, list the available keymaps and use yours:@* # @strong{localectl list-keymaps}@* # @strong{loadkeys LAYOUT}@* For me, LAYOUT would have been dvorak-uk.
+
+@node Establish an internet connection
+@section Establish an internet connection
+@anchor{#establish-an-internet-connection}
+Refer to @uref{https://wiki.parabola.nu/Beginners%27_guide#Establish_an_internet_connection,this guide}. Wired is recommended, but wireless is also explained there.
+
+@node Getting started
+@section Getting started
+@anchor{#getting-started}
+The beginning is based on @uref{https://wiki.parabolagnulinux.org/Installation_Guide,https://wiki.parabolagnulinux.org/Installation_Guide}. Then I referred to @uref{https://wiki.archlinux.org/index.php/Partitioning,https://wiki.archlinux.org/index.php/Partitioning} at first.
+
+@node dm-mod
+@section dm-mod
+@anchor{#dm-mod}
+device-mapper will be used - a lot. Make sure that the kernel module is loaded:@* # @strong{modprobe dm-mod}
+
+@node Create LUKS partition
+@section Create LUKS partition
+@anchor{#create-luks-partition}
+I am using MBR partitioning, so I use cfdisk:@* # @strong{cfdisk /dev/sda}
+
+I create a single large sda1 filling the whole drive, leaving it as the default type 'Linux' (83).
+
+Now I refer to @uref{https://wiki.archlinux.org/index.php/Dm-crypt/Drive_preparation#Partitioning,https://wiki.archlinux.org/index.php/Dm-crypt/Drive_preparation#Partitioning}:@* I am then directed to @uref{https://wiki.archlinux.org/index.php/Dm-crypt/Device_encryption,https://wiki.archlinux.org/index.php/Dm-crypt/Device_encryption}.
+
+Parabola forces you to RTFM. Do that.
+
+It tells me to run:@* # @strong{cryptsetup benchmark} (for making sure the list below is populated)@* Then:@* # @strong{cat /proc/crypto}@* This gives me crypto options that I can use. It also provides a representation of the best way to set up LUKS (in this case, security is a priority; speed, a distant second). To gain a better understanding, I am also reading:@* # @strong{man cryptsetup}
+
+Following that page, based on my requirements, I do the following based on @uref{https://wiki.archlinux.org/index.php/Dm-crypt/Device_encryption#Encryption_options_for_LUKS_mode,https://wiki.archlinux.org/index.php/Dm-crypt/Device_encryption#Encryption_options_for_LUKS_mode}. Reading through, it seems like Serpent (encryption) and Whirlpool (hash) is the best option.
+
+I am initializing LUKS with the following:@* # @strong{cryptsetup -v --cipher serpent-xts-plain64 --key-size 512 --hash whirlpool --use-random --verify-passphrase luksFormat /dev/sda1} Choose a @strong{secure} passphrase here. Ideally lots of lowercase/uppercase numbers, letters, symbols etc all in a random pattern. The password length should be as long as you are able to handle without writing it down or storing it anywhere.
+
+Use of the @emph{diceware method} is recommended, for generating secure passphrases (instead of passwords).
+
+@node Create LVM
+@section Create LVM
+@anchor{#create-lvm}
+Now I refer to @uref{https://wiki.archlinux.org/index.php/LVM,https://wiki.archlinux.org/index.php/LVM}.
+
+Open the LUKS partition:@* # @strong{cryptsetup luksOpen /dev/sda1 lvm}@* (it will be available at /dev/mapper/lvm)
+
+Create LVM partition:@* # @strong{pvcreate /dev/mapper/lvm}@* Show that you just created it:@* # @strong{pvdisplay}
+
+Now I create the volume group, inside of which the logical volumes will be created:@* # @strong{vgcreate matrix /dev/mapper/lvm}@* (volume group name is 'matrix' - choose your own name, if you like) Show that you created it:@* # @strong{vgdisplay}
+
+Now create the logical volumes:@* # @strong{lvcreate -L 2G matrix -n swapvol} (2G swap partition, named swapvol)@* Again, choose your own name if you like. Also, make sure to choose a swap size of your own needs. It basically depends on how much RAM you have installed. I refer to @uref{http://www.linux.com/news/software/applications/8208-all-about-linux-swap-space,http://www.linux.com/news/software/applications/8208-all-about-linux-swap-space}.@* # @strong{lvcreate -l +100%FREE matrix -n rootvol} (single large partition in the rest of the space, named rootvol)@* You can also be flexible here, for example you can specify a /boot, a /, a /home, a /var, a /usr, etc. For example, if you will be running a web/mail server then you want /var in its own partition (so that if it fills up with logs, it won't crash your system). For a home/laptop system (typical use case), a root and a swap will do (really).
+
+Verify that the logical volumes were created, using the following command:@* # @strong{lvdisplay}
+
+@node Create / and swap partitions and mount
+@section Create / and swap partitions, and mount
+@anchor{#create-and-swap-partitions-and-mount}
+For the swapvol LV I use:@* # @strong{mkswap /dev/mapper/matrix-swapvol}@* Activate swap:@* # @strong{swapon /dev/matrix/swapvol}
+
+For the rootvol LV I use:@* # @strong{mkfs.ext4 /dev/mapper/matrix-rootvol}
+
+Mount the root (/) partition:@* # @strong{mount /dev/matrix/rootvol /mnt}
+
+@node Continue with Parabola installation
+@section Continue with Parabola installation
+@anchor{#continue-with-parabola-installation}
+This guide is really about GRUB, Parabola and cryptomount. I have to show how to install Parabola so that the guide can continue.
+
+Now I am following the rest of @uref{https://wiki.parabolagnulinux.org/Installation_Guide,https://wiki.parabolagnulinux.org/Installation_Guide}. I also cross referenced @uref{https://wiki.archlinux.org/index.php/Installation_guide,https://wiki.archlinux.org/index.php/Installation_guide}.
+
+Create /home and /boot on rootvol mountpoint:@* # @strong{mkdir -p /mnt/home}@* # @strong{mkdir -p /mnt/boot}
+
+Once all the remaining partitions, if any, have been mounted, the devices are ready to install Parabola.
+
+In @strong{/etc/pacman.d/mirrorlist}, comment out all lines except the Server line closest to where you are (I chose the UK Parabola server (main server)) and then did:@* # @strong{pacman -Syy}@* # @strong{pacman -Syu}@* # @strong{pacman -Sy pacman} (and then I did the other 2 steps above, again)@* In my case I did the steps in the next paragraph, and followed the steps in this paragraph again.
+
+<troubleshooting>@* @ @ @ The following is based on 'Verification of package signatures' in the Parabola install guide.@* @ @ @ Check there first to see if steps differ by now.@* @ @ @ Now you have to update the default Parabola keyring. This is used for signing and verifying packages:@* @ @ @ # @strong{pacman -Sy parabola-keyring}@* @ @ @ It says that if you get GPG errors, then it's probably an expired key and, therefore, you should do:@* @ @ @ # @strong{pacman-key --populate parabola}@* @ @ @ # @strong{pacman-key --refresh-keys}@* @ @ @ # @strong{pacman -Sy parabola-keyring}@* @ @ @ To be honest, you should do the above anyway. Parabola has a lot of maintainers, and a lot of keys. Really!@* @ @ @ If you get an error mentioning dirmngr, do:@* @ @ @ # @strong{dirmngr </dev/null}@* @ @ @ Also, it says that if the clock is set incorrectly then you have to manually set the correct time @* @ @ @ (if keys are listed as expired because of it):@* @ @ @ # @strong{date MMDDhhmm[[CC]YY][.ss]}@* @ @ @ I also had to install:@* @ @ @ # @strong{pacman -S archlinux-keyring}@* @ @ @ # @strong{pacman-key --populate archlinux}@* @ @ @ In my case I saw some conflicting files reported in pacman, stopping me from using it.@* @ @ @ I deleted the files that it mentioned and then it worked. Specifically, I had this error:@* @ @ @ @emph{licenses: /usr/share/licenses/common/MPS exists in filesystem}@* @ @ @ I rm -Rf'd the file and then pacman worked. I'm told that the following would have also made it work:@* @ @ @ # @strong{pacman -Sf licenses}@* </troubleshooting>@*
+
+I also like to install other packages (base-devel, compilers and so on) and wpa_supplicant/dialog/iw/wpa_actiond are needed for wireless after the install:@* # @strong{pacstrap /mnt base base-devel wpa_supplicant dialog iw wpa_actiond}
+
+@node Configure the system
+@section Configure the system
+@anchor{#configure-the-system}
+Generate an fstab - UUIDs are used because they have certain advantages (see @uref{https://wiki.parabola.nu/Fstab#Identifying_filesystems,https://wiki.parabola.nu/Fstab#Identifying_filesystems}. If you prefer labels instead, replace the -U option with -L):@* # @strong{genfstab -U -p /mnt >> /mnt/etc/fstab}@* Check the created file:@* # @strong{cat /mnt/etc/fstab}@* (If there are any errors, edit the file. Do @strong{NOT} run the genfstab command again!)
+
+Chroot into new system:@* # @strong{arch-chroot /mnt /bin/bash}
+
+It's a good idea to have this installed:@* # @strong{pacman -S linux-libre-lts}
+
+It was also suggested that you should install this kernel (read up on what GRSEC is):@* # @strong{pacman -S linux-libre-grsec}
+
+This is another kernel that sits inside /boot, which you can use. LTS means 'long-term support'. These are so-called 'stable' kernels that can be used as a fallback during updates, if a bad kernel causes issues for you.
+
+Parabola does not have wget. This is sinister. Install it:@* # @strong{pacman -S wget}
+
+Locale:@* # @strong{nano /etc/locale.gen}@* Uncomment your needed localisations. For example en_GB.UTF-8 (UTF-8 is highly recommended over other options).@* # @strong{locale-gen}@* # @strong{echo LANG=en_GB.UTF-8 > /etc/locale.conf}@* # @strong{export LANG=en_GB.UTF-8}
+
+Console font and keymap:@* # @strong{nano /etc/vconsole.conf}@* In my case:
+
+@verbatim
+KEYMAP=dvorak-uk
+FONT=Lat9w-16
+@end verbatim
+
+Time zone:@* # @strong{ln -s /usr/share/zoneinfo/Europe/London /etc/localtime}@* (Replace Zone and Subzone to your liking. See /usr/share/zoneinfo)
+
+Hardware clock:@* # @strong{hwclock --systohc --utc}
+
+Hostname: Write your hostname to /etc/hostname. For example, if your hostname is parabola:@* # @strong{echo parabola > /etc/hostname}@* Add the same hostname to /etc/hosts:@* # @strong{nano /etc/hosts}@*
+
+@verbatim
+#<ip-address> <hostname.domain.org> <hostname>
+127.0.0.1 localhost.localdomain localhost parabola
+::1 localhost.localdomain localhost parabola
+@end verbatim
+
+Configure the network: Refer to @uref{https://wiki.parabola.nu/Beginners%27_guide#Configure_the_network,https://wiki.parabola.nu/Beginners%27_guide#Configure_the_network}.
+
+Mkinitcpio: Configure /etc/mkinitcpio.conf as needed (see @uref{https://wiki.parabola.nu/Mkinitcpio,https://wiki.parabola.nu/Mkinitcpio}). Runtime modules can be found in /usr/lib/initcpio/hooks, and build hooks can be found in /usr/lib/initcpio/install. (# @strong{mkinitcpio -H hookname} gives information about each hook.) Specifically, for this use case:@* # @strong{nano /etc/mkinitcpio.conf}@* Then modify the file like so:
+
+@itemize
+@item
+MODULES="i915"
+@item
+This forces the driver to load earlier, so that the console font isn't wiped out after getting to login)
+@item
+HOOKS="base udev autodetect modconf block keyboard keymap consolefont encrypt lvm2 filesystems fsck shutdown"
+@item
+Explanation:
+@item
+keymap adds to initramfs the keymap that you specified in /etc/vconsole.conf
+@item
+consolefont adds to initramfs the font that you specified in /etc/vconsole.conf
+@item
+encrypt adds LUKS support to the initramfs - needed to unlock your disks at boot time
+@item
+lvm2 adds LVM support to the initramfs - needed to mount the LVM partitions at boot time
+@item
+shutdown is needed according to Parabola wiki for unmounting devices (such as LUKS/LVM) during shutdown)
+@end itemize
+
+Now using mkinitcpio, you can create the kernel and ramdisk for booting with (this is different from Arch, specifying linux-libre instead of linux):@* # @strong{mkinitcpio -p linux-libre}@* Also do it for linux-libre-lts:@* # @strong{mkinitcpio -p linux-libre-lts}@* Also do it for linux-libre-grsec:@* # @strong{mkinitcpio -p linux-libre-grsec}
+
+Set the root password: At the time of writing, Parabola used SHA512 by default for its password hashing. I referred to @uref{https://wiki.archlinux.org/index.php/SHA_password_hashes,https://wiki.archlinux.org/index.php/SHA_password_hashes}.@* # @strong{nano /etc/pam.d/passwd}@* Add rounds=65536 at the end of the uncommented 'password' line.@* # @strong{passwd root}@* Make sure to set a secure password! Also, it must never be the same as your LUKS password.
+
+Use of the @emph{diceware method} is recommended, for generating secure passphrases (instead of passwords).
+
+@node Extra security tweaks
+@section Extra security tweaks
+@anchor{#extra-security-tweaks}
+Based on @uref{https://wiki.archlinux.org/index.php/Security,https://wiki.archlinux.org/index.php/Security}.
+
+Restrict access to important directories:@* # @strong{chmod 700 /boot /etc/@{iptables,arptables@}}
+
+Lockout user after three failed login attempts:@* Edit the file /etc/pam.d/system-login and comment out that line:@* @emph{# auth required pam_tally.so onerr=succeed file=/var/log/faillog}@* Or just delete it. Above it, put:@* @emph{auth required pam_tally.so deny=2 unlock_time=600 onerr=succeed file=/var/log/faillog}@* To unlock a user manually (if a password attempt is failed 3 times), do:@* # @strong{pam_tally --user @emph{theusername} --reset} What the above configuration does is lock the user out for 10 minutes, if they make 3 failed login attempts.
+
+Configure sudo - not covered here. Will be covered post-installation in another tutorial, at a later date. If this is a single-user system, you don't really need sudo.
+
+@node Unmount reboot!
+@section Unmount, reboot!
+@anchor{#unmount-reboot}
+Exit from chroot:@* # @strong{exit}
+
+unmount:@* # @strong{umount -R /mnt}@* # @strong{swapoff -a}
+
+deactivate the lvm lv's:@* # @strong{lvchange -an /dev/matrix/rootvol}@* # @strong{lvchange -an /dev/matrix/swapvol}@*
+
+Lock the encrypted partition (close it):@* # @strong{cryptsetup luksClose lvm}
+
+# @strong{shutdown -h now}@* Remove the installation media, then boot up again.
+
+@node Booting from GRUB
+@section Booting from GRUB
+@anchor{#booting-from-grub}
+Initially you will have to boot manually. Press C to get to the GRUB command line. The underlined parts are optional (using those 2 underlines will boot lts kernel instead of normal).
+
+grub> @strong{cryptomount -a}@* grub> @strong{set root='lvm/matrix-rootvol'}@* grub> @strong{linux /boot/vmlinuz-linux-libre-lts root=/dev/matrix/rootvol cryptdevice=/dev/sda1:root}@* grub> @strong{initrd /boot/initramfs-linux-libre-lts.img}@* grub> @strong{boot}@*
+
+You could also make it load /boot/vmlinuz-linux-libre-grsec and /boot/initramfs-linux-libre-grsec.img
+
+@node Follow-up tutorial configuring Parabola
+@section Follow-up tutorial: configuring Parabola
+@anchor{#follow-up-tutorial-configuring-parabola}
+We will modify grub.config inside the ROM and do all kinds of fun stuff, but I recommend that you first transform the current bare-bones Parabola install into a more useable system. Doing so will make the upcoming ROM modifications MUCH easier to perform and less risky! @uref{configuring_parabola.html,configuring_parabola.html} shows my own notes post-installation. Using these, you can get a basic system similar to the one that I chose for myself. You can also cherry pick useful notes and come up with your own system. Parabola is user-centric, which means that you are in control. For more information, read @uref{https://wiki.archlinux.org/index.php/The_Arch_Way,The Arch Way} (Parabola also follows it).
+
+@node Modify grubcfg inside the ROM
+@section Modify grub.cfg inside the ROM
+@anchor{#modify-grub.cfg-inside-the-rom}
+(Re-)log in to your system, pressing C, so booting manually from GRUB (see above). You need to modify the ROM, so that Parabola can boot automatically with this configuration. @uref{grub_cbfs.html,grub_cbfs.html} shows you how. Follow that guide, using the configuration details below. If you go for option 2 (re-flash), promise to do this on grubtest.cfg first! We can't emphasise this enough. This is to reduce the possibility of bricking your device!
+
+I will go for the re-flash option here. Firstly, cd to the libreboot_util/cbfstool/@{armv7l i686 x86_64@} directory. Dump the current firmware - where @emph{libreboot.rom} is an example: make sure to adapt:@* # @strong{flashrom -p internal -r libreboot.rom}@* If flashrom complains about multiple flash chips detected, add a @emph{-c} option at the end, with the name of your chosen chip is quotes.@* You can check if everything is in there (@emph{grub.cfg} and @emph{grubtest.cfg} would be really nice):@* $ @strong{./cbfstool libreboot.rom print}@* Extract grubtest.cfg:@* $ @strong{./cbfstool libreboot.rom extract -n grubtest.cfg -f grubtest.cfg}@* And modify:@* $ @strong{nano grubtest.cfg}
+
+In grubtest.cfg, inside the 'Load Operating System' menu entry, change the contents to:
+
+@verbatim
+cryptomount -a
+set root='lvm/matrix-rootvol'
+linux /boot/vmlinuz-linux-libre-lts root=/dev/matrix/rootvol cryptdevice=/dev/sda1:root
+initrd /boot/initramfs-linux-libre-lts.img
+@end verbatim
+
+Note: the underlined parts above (-lts) can also be removed, to boot the latest kernel instead of LTS (long-term support) kernels. You could also copy the menu entry and in one have -lts, and without in the other menuentry. You could also create a menu entry to load /boot/vmlinuz-linux-libre-grsec and /boot/initramfs-linux-libre-grsec.img The first entry will load by default.
+
+Without specifying a device, the @emph{-a} parameter tries to unlock all detected LUKS volumes. You can also specify -u UUID or -a (device).
+
+Now, to protect your system from an attacker simply booting a live usb distro and re-flashing the boot firmware, we are going to add a password for GRUB. In a new terminal window, if you are not yet online, start dhcp on ethernet:@* # @strong{systemctl start dhcpcd.service} Or make sure to get connected to the internet in any other way you prefer, at least.
+
+Use of the @emph{diceware method} is recommended, for generating secure passphrases (instead of passwords).
+
+AGAIN: MAKE SURE TO DO THIS WHOLE SECTION ON grubtest.cfg *BEFORE* DOING IT ON grub.cfg. (When we get there, upon reboot, select the menu entry that says @emph{Switch to grubtest.cfg} and test that it works. Only once you are satisfied, copy that to grub.cfg. Only a few steps to go, though.) WHY? BECAUSE AN INCORRECTLY SET PASSWORD CONFIG MEANS YOU CAN'T AUTHENTICATE, WHICH MEANS 'BRICK'.
+
+(emphasis added, because it's needed: this is a common roadblock for users.)
+
+We need a utility that comes with GRUB, so we will download it temporarily. (Remember that GRUB isn't needed for booting, since it's already included as a payload in libreboot.) Also, we will use flashrom, and I installed dmidecode. You only need base-devel (compilers and so on) to build and use cbfstool. It was already installed if you followed this tutorial, but here it is:@* # @strong{pacman -S grub flashrom dmidecode base-devel}@* Next, do:@* # @strong{grub-mkpasswd-pbkdf2}@* Enter your chosen password at the prompt and your hash will be shown. Copy this string - you will add it to your grubtest.cfg.
+
+The password below (it's @strong{password}, by the way) after @emph{'password_pbkdf2 root'} @emph{should be changed} to your own. Make sure to specify a password that is different from both your LUKS *and* your root/user password. Obviously, do not simply copy and paste the examples shown here...
+
+Next, back in grubtest.cfg, above the first 'Load Operating System' menu entry, you should now add your GRUB password, like so (replace with your own name (I used @strong{root} on both lines, feel free to choose another one) and the password hash which you copied):
+
+@verbatim
+set superusers="root"
+password_pbkdf2 root grub.pbkdf2.sha512.10000.711F186347156BC105CD83A2ED7AF1EB971AA2B1EB2640172F34B0DEFFC97E654AF48E5F0C3B7622502B76458DA494270CC0EA6504411D676E6752FD1651E749.8DD11178EB8D1F633308FD8FCC64D0B243F949B9B99CCEADE2ECA11657A757D22025986B0FA116F1D5191E0A22677674C994EDBFADE62240E9D161688266A711
+@end verbatim
+
+Save your changes in grubtest.cfg, then delete the unmodified config from the ROM image:@* $ @strong{./cbfstool libreboot.rom remove -n grubtest.cfg}@* and insert the modified grubtest.cfg:@* $ @strong{./cbfstool libreboot.rom add -n grubtest.cfg -f grubtest.cfg -t raw}@*
+
+Now refer to @uref{http://libreboot.org/install/index.html#flashrom,http://libreboot.org/install/index.html#flashrom}. Cd (up) to the libreboot_util directory and update the flash chip contents:@* # @strong{./flash update libreboot.rom}@* Ocassionally, coreboot changes the name of a given board. If flashrom complains about a board mismatch, but you are sure that you chose the correct ROM image, then run this alternative command:@* # @strong{./flash forceupdate libreboot.rom}@* You should see "Verifying flash... VERIFIED." written at the end of the flashrom output.
+
+With this new configuration, Parabola can boot automatically and you will have to enter a password at boot time, in GRUB, before being able to use any of the menu entries or switch to the terminal. Let's test it out: reboot and choose grubtest.cfg from the GRUB menu, using the arrow keys on your keyboard. Enter the name you chose, the GRUB password, your LUKS passphrase and login as root/your user. All went well? Great!
+
+If it does not work like you want it to, if you are unsure or sceptical in any way, don't despair: you have been wise and did not brick your device! Reboot and login the default way, and then modify your grubtest.cfg until you get it right! @strong{Do *not* proceed past this point unless you are 100% sure that your new configuration is safe (or desirable) to use.}
+
+Now, we can easily and safely create a copy of grubtest.cfg, called grub.cfg. This will be the same except for one difference: the menuentry 'Switch to grub.cfg' is changed to 'Switch to grubtest.cfg' and, inside it, all instances of grub.cfg to grubtest.cfg. This is so that the main config still links (in the menu) to grubtest.cfg, so that you don't have to manually switch to it, in case you ever want to follow this guide again in the future (modifying the already modified config). Inside libreboot_util/cbfstool/@{armv7l i686 x86_64@}, we can do this with the following command:@* $ @strong{sed -e 's:(cbfsdisk)/grub.cfg:(cbfsdisk)/grubtest.cfg:g' -e 's:Switch to grub.cfg:Switch to grubtest.cfg:g' < grubtest.cfg > grub.cfg}@* Delete the grub.cfg that remained inside the ROM:@* $ @strong{./cbfstool libreboot.rom remove -n grub.cfg}@* Add the modified version that you just made:@* $ @strong{./cbfstool libreboot.rom add -n grub.cfg -f grub.cfg -t raw}@*
+
+Now you have a modified ROM. Once more, refer to @uref{http://libreboot.org/install/index.html#flashrom,http://libreboot.org/install/index.html#flashrom}. Cd to the libreboot_util directory and update the flash chip contents:@* # @strong{./flash update libreboot.rom}@* And wait for the "Verifying flash... VERIFIED." Once you have done that, shut down and then boot up with your new configuration.
+
+When done, delete GRUB (remember, we only needed it for the @emph{grub-mkpasswd-pbkdf2} utility; GRUB is already part of libreboot, flashed alongside it as a @emph{payload}):@* # @strong{pacman -R grub}
+
+If you followed all that correctly, you should now have a fully encrypted Parabola installation. Refer to the wiki for how to do the rest.
+
+@node Bonus Using a key file to unlock /boot/
+@section Bonus: Using a key file to unlock /boot/
+@anchor{#bonus-using-a-key-file-to-unlock-boot}
+By default, you will have to enter your LUKS passphrase twice; once in GRUB, and once when booting the kernel. GRUB unlocks the encrypted partition and then loads the kernel, but the kernel is not aware of the fact that it is being loaded from an encrypted volume. Therefore, you will be asked to enter your passphrase a second time. A workaround is to put a keyfile inside initramfs, with instructions for the kernel to use it when booting. This is safe, because /boot/ is encrypted (otherwise, putting a keyfile inside initramfs would be a bad idea).@* Boot up and login as root or your user. Then generate the key file:@* # @strong{dd bs=512 count=4 if=/dev/urandom of=/etc/mykeyfile iflag=fullblock}@* Insert it into the luks volume:@* # @strong{cryptsetup luksAddKey /dev/sdX /etc/mykeyfile}@* and enter your LUKS passphrase when prompted. Add the keyfile to the initramfs by adding it to FILES in /etc/mkinitcpio.conf. For example:@* # @strong{FILES="/etc/mykeyfile"}@* Create the initramfs image from scratch:@* # @strong{mkinitcpio -p linux-libre}@* # @strong{mkinitcpio -p linux-libre-lts}@* # @strong{mkinitcpio -p linux-libre-grsec}@* Add the following to your grub.cfg - you are now able to do that, see above! -, or add it in the kernel command line for GRUB:@* # @strong{cryptkey=rootfs:/etc/mykeyfile}@* @* You can also place this inside the grub.cfg that exists in CBFS: @uref{grub_cbfs.html,grub_cbfs.html}.
+
+@node Further security tips
+@section Further security tips
+@anchor{#further-security-tips}
+@uref{https://wiki.archlinux.org/index.php/Security,https://wiki.archlinux.org/index.php/Security}.@* @uref{https://wiki.parabolagnulinux.org/User:GNUtoo/laptop,https://wiki.parabolagnulinux.org/User:GNUtoo/laptop}
+
+@node Troubleshooting
+@chapter Troubleshooting
+@anchor{#troubleshooting}
+A user reported issues when booting with a docking station attached on an X200, when decrypting the disk in GRUB. The error @emph{AHCI transfer timed out} was observed. The workaround was to remove the docking station.
+
+Further investigation revealed that it was the DVD drive causing problems. Removing that worked around the issue.
+
+@verbatim
+
+"sudo wodim -prcap" shows information about the drive:
+Device was not specified. Trying to find an appropriate drive...
+Detected CD-R drive: /dev/sr0
+Using /dev/cdrom of unknown capabilities
+Device type : Removable CD-ROM
+Version : 5
+Response Format: 2
+Capabilities :
+Vendor_info : 'HL-DT-ST'
+Identification : 'DVDRAM GU10N '
+Revision : 'MX05'
+Device seems to be: Generic mmc2 DVD-R/DVD-RW.
+
+Drive capabilities, per MMC-3 page 2A:
+
+ Does read CD-R media
+ Does write CD-R media
+ Does read CD-RW media
+ Does write CD-RW media
+ Does read DVD-ROM media
+ Does read DVD-R media
+ Does write DVD-R media
+ Does read DVD-RAM media
+ Does write DVD-RAM media
+ Does support test writing
+
+ Does read Mode 2 Form 1 blocks
+ Does read Mode 2 Form 2 blocks
+ Does read digital audio blocks
+ Does restart non-streamed digital audio reads accurately
+ Does support Buffer-Underrun-Free recording
+ Does read multi-session CDs
+ Does read fixed-packet CD media using Method 2
+ Does not read CD bar code
+ Does not read R-W subcode information
+ Does read raw P-W subcode data from lead in
+ Does return CD media catalog number
+ Does return CD ISRC information
+ Does support C2 error pointers
+ Does not deliver composite A/V data
+
+ Does play audio CDs
+ Number of volume control levels: 256
+ Does support individual volume control setting for each channel
+ Does support independent mute setting for each channel
+ Does not support digital output on port 1
+ Does not support digital output on port 2
+
+ Loading mechanism type: tray
+ Does support ejection of CD via START/STOP command
+ Does not lock media on power up via prevent jumper
+ Does allow media to be locked in the drive via PREVENT/ALLOW command
+ Is not currently in a media-locked state
+ Does not support changing side of disk
+ Does not have load-empty-slot-in-changer feature
+ Does not support Individual Disk Present feature
+
+ Maximum read speed: 4234 kB/s (CD 24x, DVD 3x)
+ Current read speed: 4234 kB/s (CD 24x, DVD 3x)
+ Maximum write speed: 4234 kB/s (CD 24x, DVD 3x)
+ Current write speed: 4234 kB/s (CD 24x, DVD 3x)
+ Rotational control selected: CLV/PCAV
+ Buffer size in KB: 1024
+ Copy management revision supported: 1
+ Number of supported write speeds: 4
+ Write speed # 0: 4234 kB/s CLV/PCAV (CD 24x, DVD 3x)
+ Write speed # 1: 2822 kB/s CLV/PCAV (CD 16x, DVD 2x)
+ Write speed # 2: 1764 kB/s CLV/PCAV (CD 10x, DVD 1x)
+ Write speed # 3: 706 kB/s CLV/PCAV (CD 4x, DVD 0x)
+
+Supported CD-RW media types according to MMC-4 feature 0x37:
+ Does write multi speed CD-RW media
+ Does write high speed CD-RW media
+ Does write ultra high speed CD-RW media
+ Does not write ultra high speed+ CD-RW media
+@end verbatim
+
+Copyright © 2014, 2015 Francis Rowe <info@@gluglug.org.uk>@* Copyright © 2015 Jeroen Quint <jezza@@diplomail.ch>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/gnulinux/encrypted_trisquel.texi b/docs/src/gnulinux/encrypted_trisquel.texi
new file mode 100644
index 0000000..4332962
--- /dev/null
+++ b/docs/src/gnulinux/encrypted_trisquel.texi
@@ -0,0 +1,347 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title Installing Trisquel GNU/Linux with full disk encryption (including /boot)
+@end titlepage
+
+@node Top
+@top Installing Trisquel GNU/Linux with full disk encryption (including /boot)
+
+@menu
+* Installing Trisquel GNU/Linux with full disk encryption including /boot::
+* Partitioning::
+* Further partitioning::
+* Kernel::
+* Tasksel::
+* Postfix configuration::
+* Install the GRUB boot loader to the master boot record::
+* Clock UTC::
+* Booting your system::
+* ecryptfs::
+* Modify grubcfg CBFS::
+* Troubleshooting::
+@end menu
+
+@node Installing Trisquel GNU/Linux with full disk encryption including /boot
+@chapter Installing Trisquel GNU/Linux with full disk encryption (including /boot)
+@anchor{#installing-trisquel-gnulinux-with-full-disk-encryption-including-boot}
+Libreboot on x86 uses the GRUB @uref{http://www.coreboot.org/Payloads#GRUB_2,payload} by default, which means that the GRUB configuration file (where your GRUB menu comes from) is stored directly alongside libreboot and its GRUB payload executable, inside the flash chip. In context, this means that installing distributions and managing them is handled slightly differently compared to traditional BIOS systems.
+
+On most systems, the /boot partition has to be left unencrypted while the others are encrypted. This is so that GRUB, and therefore the kernel, can be loaded and executed since the firmware can't open a LUKS volume. Not so with libreboot! Since GRUB is already included directly as a payload, even /boot can be encrypted. This protects /boot from tampering by someone with physical access to the system.
+
+This works in Trisquel 7, and probably Trisquel 6. Boot the 'net installer' (Install Trisquel in Text Mode). @uref{grub_boot_installer.html,How to boot a GNU/Linux installer}.
+
+@strong{This guide is *only* for the GRUB payload. If you use the depthcharge payload, ignore this section entirely.}
+
+@uref{index.html,Back to previous index}
+
+Set a strong user password (lots of lowercase/uppercase, numbers and symbols).
+
+Use of the @emph{diceware method} is recommended, for generating secure passphrases (instead of passwords).
+
+when the installer asks you to set up encryption (ecryptfs) for your home directory, select 'Yes' if you want to: @strong{LUKS is already secure and performs well. Having ecryptfs on top of it will add noticeable performance penalty, for little security gain in most use cases. This is therefore optional, and not recommended. Choose 'no'.}
+
+@strong{Your user password should be different from the LUKS password which you will set later on. Your LUKS password should, like the user password, be secure.}
+
+@node Partitioning
+@chapter Partitioning
+@anchor{#partitioning}
+Choose 'Manual' partitioning:
+
+@itemize
+@item
+Select drive and create new partition table
+@item
+Single large partition. The following are mostly defaults:
+@itemize
+@item
+Use as: physical volume for encryption
+@item
+Encryption: aes
+@item
+key size: 256
+@item
+IV algorithm: xts-plain64
+@item
+Encryption key: passphrase
+@item
+erase data: Yes (only choose 'No' if it's a new drive that doesn't contain your private data)
+@end itemize
+
+@item
+Select 'configure encrypted volumes'
+@itemize
+@item
+Create encrypted volumes
+@item
+Select your partition
+@item
+Finish
+@item
+Really erase: Yes
+@item
+(erase will take a long time. be patient)
+@item
+(if your old system was encrypted, just let this run for about a minute to make sure that the LUKS header is wiped out)
+@end itemize
+
+@item
+Select encrypted space:
+@itemize
+@item
+use as: physical volume for LVM
+@item
+Choose 'done setting up the partition'
+@end itemize
+
+@item
+Configure the logical volume manager:
+@itemize
+@item
+Keep settings: Yes
+@end itemize
+
+@item
+Create volume group:
+@itemize
+@item
+Name: @strong{grubcrypt} (you can use whatever you want here, this is just an example)
+@item
+Select crypto partition
+@end itemize
+
+@item
+Create logical volume
+@itemize
+@item
+select @strong{grubcrypt} (or whatever you named it before)
+@item
+name: @strong{trisquel} (you can use whatever you want here, this is just an example)
+@item
+size: default, minus 2048 MB
+@end itemize
+
+@item
+Create logical volume
+@itemize
+@item
+select @strong{grubcrypt} (or whatever you named it before)
+@item
+name: @strong{swap} (you can use whatever you want here, this is just an example)
+@item
+size: press enter
+@end itemize
+
+@end itemize
+
+@node Further partitioning
+@chapter Further partitioning
+@anchor{#further-partitioning}
+Now you are back at the main partitioning screen. You will simply set mountpoints and filesystems to use.
+
+@itemize
+@item
+LVM LV trisquel
+@itemize
+@item
+use as: ext4
+@item
+mount point: /
+@item
+done setting up partition
+@end itemize
+
+@item
+LVM LV swap
+@itemize
+@item
+use as: swap area
+@item
+done setting up partition
+@end itemize
+
+@item
+Now you select 'Finished partitioning and write changes to disk'.
+@end itemize
+
+@node Kernel
+@chapter Kernel
+@anchor{#kernel}
+Installation will ask what kernel you want to use. linux-generic is fine.
+
+@node Tasksel
+@chapter Tasksel
+@anchor{#tasksel}
+Choose @emph{"Trisquel Desktop Environment"} if you want GNOME, @emph{"Trisquel-mini Desktop Environment"} if you want LXDE or @emph{"Triskel Desktop Environment"} if you want KDE. If you want to have no desktop (just a basic shell) when you boot or if you want to create your own custom setup, then choose nothing here (don't select anything). You might also want to choose some of the other package groups; it's up to you.
+
+@node Postfix configuration
+@chapter Postfix configuration
+@anchor{#postfix-configuration}
+If asked, choose @emph{"No Configuration"} here (or maybe you want to select something else. It's up to you.)
+
+@node Install the GRUB boot loader to the master boot record
+@chapter Install the GRUB boot loader to the master boot record
+@anchor{#install-the-grub-boot-loader-to-the-master-boot-record}
+Choose 'Yes'. It will fail, but don't worry. Then at the main menu, choose 'Continue without a bootloader'. You could also choose 'No'. Choice is irrelevant here.
+
+@emph{You do not need to install GRUB at all, since in libreboot you are using the GRUB payload (for libreboot) to boot your system directly.}
+
+@node Clock UTC
+@chapter Clock UTC
+@anchor{#clock-utc}
+Just say 'Yes'.
+
+@node Booting your system
+@chapter Booting your system
+@anchor{#booting-your-system}
+At this point, you will have finished the installation. At your GRUB payload, press C to get to the command line.
+
+Do that:@* grub> @strong{cryptomount -a}@* grub> @strong{set root='lvm/grubcrypt-trisquel'}@* grub> @strong{linux /vmlinuz root=/dev/mapper/grubcrypt-trisquel cryptdevice=/dev/mapper/grubcrypt-trisquel:root}@* grub> @strong{initrd /initrd.img}@* grub> @strong{boot}
+
+@node ecryptfs
+@chapter ecryptfs
+@anchor{#ecryptfs}
+If you didn't encrypt your home directory, then you can safely ignore this section.
+
+Immediately after logging in, do that:@* $ @strong{sudo ecryptfs-unwrap-passphrase}
+
+This will be needed in the future if you ever need to recover your home directory from another system, so write it down and keep the note somewhere secret. Ideally, you should memorize it and then burn the note (or not even write it down, and memorize it still)>
+
+@node Modify grubcfg CBFS
+@chapter Modify grub.cfg (CBFS)
+@anchor{#modify-grub.cfg-cbfs}
+Now you need to set it up so that the system will automatically boot, without having to type a bunch of commands.
+
+Modify your grub.cfg (in the firmware) @uref{grub_cbfs.html,using this tutorial}; just change the default menu entry 'Load Operating System' to say this inside:
+
+@strong{cryptomount -a}@* @strong{set root='lvm/grubcrypt-trisquel'}@* @strong{linux /vmlinuz root=/dev/mapper/grubcrypt-trisquel cryptdevice=/dev/mapper/grubcrypt-trisquel:root}@* @strong{initrd /initrd.img}
+
+Without specifying a device, the @emph{-a} parameter tries to unlock all detected LUKS volumes. You can also specify -u UUID or -a (device).
+
+Additionally, you should set a GRUB password. This is not your LUKS password, but it's a password that you have to enter to see GRUB. This protects your system from an attacker simply booting a live USB and re-flashing your firmware. @strong{This should be different than your LUKS passphrase and user password.}
+
+Use of the @emph{diceware method} is recommended, for generating secure passphrases (as opposed to passwords).
+
+The GRUB utility can be used like so:@* $ @strong{grub-mkpasswd-pbkdf2}
+
+Give it a password (remember, it has to be secure) and it'll output something like:@* @strong{grub.pbkdf2.sha512.10000.711F186347156BC105CD83A2ED7AF1EB971AA2B1EB2640172F34B0DEFFC97E654AF48E5F0C3B7622502B76458DA494270CC0EA6504411D676E6752FD1651E749.8DD11178EB8D1F633308FD8FCC64D0B243F949B9B99CCEADE2ECA11657A757D22025986B0FA116F1D5191E0A22677674C994EDBFADE62240E9D161688266A711}
+
+Use of the @emph{diceware method} is recommended, for generating secure passphrases (instead of passwords).
+
+Put that in the grub.cfg (the one for CBFS inside the ROM) before the 'Load Operating System' menu entry like so (example):@*
+
+@verbatim
+set superusers="root"
+password_pbkdf2 root grub.pbkdf2.sha512.10000.711F186347156BC105CD83A2ED7AF1EB971AA2B1EB2640172F34B0DEFFC97E654AF48E5F0C3B7622502B76458DA494270CC0EA6504411D676E6752FD1651E749.8DD11178EB8D1F633308FD8FCC64D0B243F949B9B99CCEADE2ECA11657A757D22025986B0FA116F1D5191E0A22677674C994EDBFADE62240E9D161688266A711
+
+@end verbatim
+
+MAKE SURE TO DO THIS ON grubtest.cfg *BEFORE* DOING IT ON grub.cfg. Then select the menu entry that says @emph{Switch to grubtest.cfg} and test that it works. Then copy that to grub.cfg once you're satisfied. WHY? BECAUSE AN INCORRECTLY SET PASSWORD CONFIG MEANS YOU CAN'T AUTHENTICATE, WHICH MEANS 'BRICK'.
+
+(emphasis added, because it's needed. This is a common roadblock for users)
+
+Obviously, replace it with the correct hash that you actually got for the password that you entered. Meaning, not the hash that you see above!
+
+After this, you will have a modified ROM with the menu entry for cryptomount, and the entry before that for the GRUB password. Flash the modified ROM using @uref{../install/index.html#flashrom,this tutorial}.
+
+@node Troubleshooting
+@chapter Troubleshooting
+@anchor{#troubleshooting}
+A user reported issues when booting with a docking station attached on an X200, when decrypting the disk in GRUB. The error @emph{AHCI transfer timed out} was observed. The workaround was to remove the docking station.
+
+Further investigation revealed that it was the DVD drive causing problems. Removing that worked around the issue.
+
+@verbatim
+
+"sudo wodim -prcap" shows information about the drive:
+Device was not specified. Trying to find an appropriate drive...
+Detected CD-R drive: /dev/sr0
+Using /dev/cdrom of unknown capabilities
+Device type : Removable CD-ROM
+Version : 5
+Response Format: 2
+Capabilities :
+Vendor_info : 'HL-DT-ST'
+Identification : 'DVDRAM GU10N '
+Revision : 'MX05'
+Device seems to be: Generic mmc2 DVD-R/DVD-RW.
+
+Drive capabilities, per MMC-3 page 2A:
+
+ Does read CD-R media
+ Does write CD-R media
+ Does read CD-RW media
+ Does write CD-RW media
+ Does read DVD-ROM media
+ Does read DVD-R media
+ Does write DVD-R media
+ Does read DVD-RAM media
+ Does write DVD-RAM media
+ Does support test writing
+
+ Does read Mode 2 Form 1 blocks
+ Does read Mode 2 Form 2 blocks
+ Does read digital audio blocks
+ Does restart non-streamed digital audio reads accurately
+ Does support Buffer-Underrun-Free recording
+ Does read multi-session CDs
+ Does read fixed-packet CD media using Method 2
+ Does not read CD bar code
+ Does not read R-W subcode information
+ Does read raw P-W subcode data from lead in
+ Does return CD media catalog number
+ Does return CD ISRC information
+ Does support C2 error pointers
+ Does not deliver composite A/V data
+
+ Does play audio CDs
+ Number of volume control levels: 256
+ Does support individual volume control setting for each channel
+ Does support independent mute setting for each channel
+ Does not support digital output on port 1
+ Does not support digital output on port 2
+
+ Loading mechanism type: tray
+ Does support ejection of CD via START/STOP command
+ Does not lock media on power up via prevent jumper
+ Does allow media to be locked in the drive via PREVENT/ALLOW command
+ Is not currently in a media-locked state
+ Does not support changing side of disk
+ Does not have load-empty-slot-in-changer feature
+ Does not support Individual Disk Present feature
+
+ Maximum read speed: 4234 kB/s (CD 24x, DVD 3x)
+ Current read speed: 4234 kB/s (CD 24x, DVD 3x)
+ Maximum write speed: 4234 kB/s (CD 24x, DVD 3x)
+ Current write speed: 4234 kB/s (CD 24x, DVD 3x)
+ Rotational control selected: CLV/PCAV
+ Buffer size in KB: 1024
+ Copy management revision supported: 1
+ Number of supported write speeds: 4
+ Write speed # 0: 4234 kB/s CLV/PCAV (CD 24x, DVD 3x)
+ Write speed # 1: 2822 kB/s CLV/PCAV (CD 16x, DVD 2x)
+ Write speed # 2: 1764 kB/s CLV/PCAV (CD 10x, DVD 1x)
+ Write speed # 3: 706 kB/s CLV/PCAV (CD 4x, DVD 0x)
+
+Supported CD-RW media types according to MMC-4 feature 0x37:
+ Does write multi speed CD-RW media
+ Does write high speed CD-RW media
+ Does write ultra high speed CD-RW media
+ Does not write ultra high speed+ CD-RW media
+@end verbatim
+
+Copyright © 2014, 2015 Francis Rowe <info@@gluglug.org.uk>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/gnulinux/grub_boot_installer.texi b/docs/src/gnulinux/grub_boot_installer.texi
new file mode 100644
index 0000000..a06f55c
--- /dev/null
+++ b/docs/src/gnulinux/grub_boot_installer.texi
@@ -0,0 +1,157 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title How to install GNU/Linux on a libreboot system
+@end titlepage
+
+@node Top
+@top How to install GNU/Linux on a libreboot system
+
+@menu
+* How to install GNU/Linux on a libreboot system::
+* Troubleshooting::
+@end menu
+
+@node How to install GNU/Linux on a libreboot system
+@chapter How to install GNU/Linux on a libreboot system
+@anchor{#how-to-install-gnulinux-on-a-libreboot-system}
+This section relates to preparing, booting and installing a GNU/Linux distribution on your libreboot system, using nothing more than a USB flash drive (and @emph{dd}).
+
+@itemize
+@item
+@ref{#prepare,Prepare the USB drive (in GNU/Linux)}
+@item
+@ref{#encryption,Installing GNU/Linux with full disk encryption}
+@item
+@ref{#guix,GNU Guix System Distribution?}
+@item
+@ref{#trisquel_netinstall,Trisquel net install?}
+@item
+@ref{#parse_isolinux,Booting ISOLINUX images (automatic method)}
+@item
+@ref{#manual_isolinux,Booting ISOLINUX images (manual method)}
+@item
+@ref{#troubleshooting,Troubleshooting}
+@end itemize
+
+@uref{index.html,Back to previous index}
+
+@strong{This section is only for the GRUB payload. For depthcharge (used on CrOS devices in libreboot), instructions have yet to be written in the libreboot documentation.}
+@menu
+* Prepare the USB drive in GNU/Linux::
+* Installing GNU/Linux with full disk encryption::
+* GNU Guix System Distribution?::
+* Trisquel net install?::
+* Booting ISOLINUX images automatic method::
+* Booting ISOLINUX images manual method::
+@end menu
+
+@node Prepare the USB drive in GNU/Linux
+@section Prepare the USB drive (in GNU/Linux)
+@anchor{#prepare-the-usb-drive-in-gnulinux}
+Connect the USB drive. Check dmesg:@* @strong{$ dmesg}@* Check lsblk to confirm which drive it is:@* @strong{$ lsblk}
+
+Check that it wasn't automatically mounted. If it was, unmount it. For example:@* @strong{$ sudo umount /dev/sdX*}@* @strong{# umount /dev/sdX*}
+
+dmesg told you what device it is. Overwrite the drive, writing your distro ISO to it with dd. For example:@* @strong{$ sudo dd if=gnulinux.iso of=/dev/sdX bs=8M; sync}@* @strong{# dd if=gnulinux.iso of=/dev/sdX bs=8M; sync}
+
+You should now be able to boot the installer from your USB drive. Continue reading, for information about how to do that.
+
+@ref{#pagetop,Back to top of page}.
+
+@node Installing GNU/Linux with full disk encryption
+@section Installing GNU/Linux with full disk encryption
+@anchor{#installing-gnulinux-with-full-disk-encryption}
+@itemize
+@item
+@uref{encrypted_trisquel.html,Installing Trisquel GNU/Linux with full disk encryption (including /boot)}
+@item
+@uref{encrypted_parabola.html,Installing Parabola GNU/Linux with full disk encryption (including /boot)}
+@end itemize
+
+@ref{#pagetop,Back to top of page}.
+
+@node GNU Guix System Distribution?
+@section GNU Guix System Distribution?
+@anchor{#gnu-guix-system-distribution}
+The Guix installers uses the GRUB bootloader, unlike most GNU/Linux installers which will likely use ISOLINUX.
+
+To boot the Guix live USB install, select @strong{@emph{Search for GRUB configuration (grub.cfg) outside of CBFS}} from the GRUB payload menu. After you have done that, a new menuentry will appear at the very bottom with text like @strong{@emph{Load Config from (usb0)}}; select that, and it should boot.
+
+Once you have installed Guix onto the main storage device, check @uref{grub_cbfs.html#option1_dont_reflash,grub_cbfs.html#option1_dont_reflash} for hints on how to boot it.
+
+GuixSD (Guix System Distribution) is highly recommended; it's part of GNU, and @uref{https://www.gnu.org/distros/free-distros.html,endorsed} by the Free Software Foundation.
+
+@ref{#pagetop,Back to top of page}.
+
+@node Trisquel net install?
+@section Trisquel net install?
+@anchor{#trisquel-net-install}
+Tip: don't use the official net install image. Download the full GNOME ISO (the ~1.5GiB one). In this ISO, there is still the capability to boot the net install, while it also provides an easy to use live system (which you can boot from USB). This ISO also works using @emph{syslinux_configfile -i} (the @emph{Parse ISOLINUX} menu entries in the default GRUB configuration that libreboot uses).
+
+@ref{#pagetop,Back to top of page}.
+
+@node Booting ISOLINUX images automatic method
+@section Booting ISOLINUX images (automatic method)
+@anchor{#booting-isolinux-images-automatic-method}
+Boot it in GRUB using the @emph{Parse ISOLINUX config (USB)} option. A new menu should appear in GRUB, showing the boot options for that distro; this is a GRUB menu, converted from the usual ISOLINUX menu provided by that distro.
+
+@ref{#pagetop,Back to top of page}.
+
+@node Booting ISOLINUX images manual method
+@section Booting ISOLINUX images (manual method)
+@anchor{#booting-isolinux-images-manual-method}
+@emph{These are generic instructions. They may or may not be correct for your distribution. You must adapt them appropriately, for whatever GNU/Linux distribution it is that you are trying to install.}
+
+If the ISOLINUX parser or @emph{Search for GRUB configuration} options won't work, then press C in GRUB to access the command line.@* grub> @strong{ls}@* Get the device from above output, eg (usb0). Example:@* grub> @strong{cat (usb0)/isolinux/isolinux.cfg}@* Either this will show the ISOLINUX menuentries for that ISO, or link to other .cfg files, for example /isolinux/foo.cfg.@* If it did that, then you do:@* grub> @strong{cat (usb0)/isolinux/foo.cfg}@* And so on, until you find the correct menuentries for ISOLINUX. @strong{The file @emph{/isolinux/foo.cfg} is a fictional example. Do not actually use this example, unless you actually have that file, if it is appropriate.}
+
+For Trisquel (and other debian-based distros), there are typically menuentries listed in @emph{/isolinux/txt.cfg} or @emph{/isolinux/gtk.cfg}. For dual-architecture ISO images (i686 and x86_64), there may be separate files/directories for each architecture. Just keep searching through the image, until you find the correct ISOLINUX configuration file.
+
+Now look at the ISOLINUX menuentry. It'll look like:@* @strong{kernel /path/to/kernel@* append PARAMETERS initrd=/path/to/initrd MAYBE_MORE_PARAMETERS@*} GRUB works the same way, but in it's own way. Example GRUB commands:@* grub> @strong{set root='usb0'}@* grub> @strong{linux /path/to/kernel PARAMETERS MAYBE_MORE_PARAMETERS}@* grub> @strong{initrd /path/to/initrd}@* grub> @strong{boot}@* Note: @emph{usb0} may be incorrect. Check the output of the @emph{ls} command in GRUB, to see a list of USB devices/partitions. Of course this will vary from distro to distro. If you did all of that correctly, then it should now be booting your USB drive in the way that you specified.
+
+@ref{#pagetop,Back to top of page}.
+
+@node Troubleshooting
+@chapter Troubleshooting
+@anchor{#troubleshooting}
+Most of these issues occur when using libreboot with coreboot's 'text mode' instead of the coreboot framebuffer. This mode is useful for booting payloads like memtest86+ which expect text-mode, but for GNU/Linux distributions it can be problematic when they are trying to switch to a framebuffer because it doesn't exist.
+
+In most cases, you should use the vesafb ROM images. Example filename: libreboot_ukdvorak_vesafb.rom.
+@menu
+* parabola won't boot in text-mode::
+* debian-installer trisquel net install graphical corruption in text-mode::
+@end menu
+
+@node parabola won't boot in text-mode
+@section parabola won't boot in text-mode
+@anchor{#parabola-wont-boot-in-text-mode}
+Use one of the ROM images with vesafb in the filename (uses coreboot framebuffer instead of text-mode).
+
+@node debian-installer trisquel net install graphical corruption in text-mode
+@section debian-installer (trisquel net install) graphical corruption in text-mode
+@anchor{#debian-installer-trisquel-net-install-graphical-corruption-in-text-mode}
+When using the ROM images that use coreboot's "text mode" instead of the coreboot framebuffer, booting the Trisquel net installer results in graphical corruption because it is trying to switch to a framebuffer which doesn't exist. Use that kernel parameter on the 'linux' line when booting it:@* @strong{vga=normal fb=false}
+
+Tested in Trisquel 6 (and 7). This forces debian-installer to start in text-mode, instead of trying to switch to a framebuffer.
+
+If selecting text-mode from a GRUB menu created using the ISOLINUX parser, you can press E on the menu entry to add this. Or, if you are booting manually (from GRUB terminal) then just add the parameters.
+
+This workaround was found on the page: @uref{https://www.debian.org/releases/stable/i386/ch05s04.html,https://www.debian.org/releases/stable/i386/ch05s04.html}. It should also work for gNewSense, Debian and any other apt-get distro that provides debian-installer (text mode) net install method.
+
+@ref{#pagetop,Back to top of page}.
+
+Copyright © 2014, 2015 Francis Rowe <info@@gluglug.org.uk>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/gnulinux/grub_cbfs.texi b/docs/src/gnulinux/grub_cbfs.texi
new file mode 100644
index 0000000..c1b6d37
--- /dev/null
+++ b/docs/src/gnulinux/grub_cbfs.texi
@@ -0,0 +1,178 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title How to replace the default GRUB configuration file on a libreboot system
+@end titlepage
+
+@node Top
+@top How to replace the default GRUB configuration file on a libreboot system
+
+@menu
+* How to replace the default GRUB configuration file on a libreboot system::
+* Table of Contents::
+@end menu
+
+@node How to replace the default GRUB configuration file on a libreboot system
+@chapter How to replace the default GRUB configuration file on a libreboot system
+@anchor{#how-to-replace-the-default-grub-configuration-file-on-a-libreboot-system}
+Libreboot on x86 uses the GRUB @uref{http://www.coreboot.org/Payloads#GRUB_2,payload} by default, which means that the GRUB configuration file (where your GRUB menu comes from) is stored directly alongside libreboot and its GRUB payload executable, inside the flash chip. In context, this means that installing distributions and managing them is handled slightly differently compared to traditional BIOS systems.
+
+A libreboot (or coreboot) ROM image is not simply "flat"; there is an actual filesystem inside called CBFS (coreboot filesystem). A utility called 'cbfstool' allows you to change the contents of the ROM image. In this case, libreboot is configured such that the 'grub.cfg' and 'grubtest.cfg' files exist directly inside CBFS instead of inside the GRUB payload 'memdisk' (which is itself stored in CBFS).
+
+You can either modify the GRUB configuration stored in the flash chip, or you can modify a GRUB configuration file on the main storage which the libreboot GRUB payload will automatically search for.
+
+Here is an excellent writeup about CBFS (coreboot filesystem): @uref{http://lennartb.home.xs4all.nl/coreboot/col5.html,http://lennartb.home.xs4all.nl/coreboot/col5.html}.
+
+@strong{This guide is *only* for the GRUB payload. If you use the depthcharge payload, ignore this section entirely.}
+
+@uref{index.html,Back to previous index}
+
+@node Table of Contents
+@chapter Table of Contents
+@anchor{#table-of-contents}
+@itemize
+@item
+@ref{#introduction,Introduction}
+@item
+@ref{#option1_dont_reflash,1st option: don't re-flash}
+@item
+@ref{#option2_reflash,2nd option: re-flash}
+@itemize
+@item
+@ref{#tools,Acquire the necessary utilities}
+@item
+@ref{#rom,Acquiring the correct ROM image}
+@item
+@ref{#extract_testconfig,Extract grubtest from the ROM image}
+@item
+@ref{#reinsert_modified_testconfig,Re-insert the modified grubtest.cfg into the ROM image}
+@item
+@ref{#testing,Testing}
+@item
+@ref{#final_steps,Final steps}
+@end itemize
+
+@end itemize
+
+@menu
+* Introduction::
+* 1st option don't re-flash::
+* 2nd option re-flash::
+* Acquire the necessary utilities::
+* Acquiring the correct ROM image::
+* Extract grubtestcfg from the ROM image::
+* Re-insert the modified grubtestcfg into the ROM image::
+* Testing::
+* Final steps::
+@end menu
+
+@node Introduction
+@section Introduction
+@anchor{#introduction}
+Download the latest release from @uref{http://libreboot.org/,http://libreboot.org/} @*@strong{If you downloaded from git, refer to @uref{../git/index.html#build_meta,../git/index.html#build_meta} before continuing.}
+
+@ref{#pagetop,Back to top of page.}
+
+There are several advantages to modifying the GRUB configuration stored in CBFS, but this also means that you have to flash a new libreboot ROM image on your system (some users feel intimidated by this, to say the least). Doing so can be risky if not handled correctly, because it can result in a bricked system (recovery is easy if you have the @uref{../install/bbb_setup.html,equipment} for it, but most people don't). If you aren't up to that then don't worry; it is possible to use a custom GRUB menu without flashing a new image, by loading a GRUB configuration from a partition on the main storage instead.
+
+@node 1st option don't re-flash
+@section 1st option: don't re-flash
+@anchor{#st-option-dont-re-flash}
+By default, GRUB in libreboot is configured to scan all partitions on the main storage for /boot/grub/libreboot_grub.cfg or /grub/libreboot_grub.cfg(for systems where /boot is on a dedicated partition), and then use it automatically.
+
+Simply create your custom GRUB configuration and save it to @strong{/boot/grub/libreboot_grub.cfg} on the running system. The next time you boot, GRUB (in libreboot) will automatically switch to this configuration file. @strong{This means that you do not have to re-flash, recompile or otherwise modify libreboot at all!}
+
+Ideally, your distribution should automatically generate a libreboot_grub.cfg file that is written specifically under the assumption that it will be read and used on a libreboot system that uses GRUB as a payload. If your distribution does not do this, then you can try to add that feature yourself or politely ask someone involved with or otherwise knowledgeable about the distribution to do it for you. The libreboot_grub.cfg could either contain the full configuration, or it could chainload another GRUB ELF executable (built to be used as a coreboot payload) that is located in a partition on the main storage.
+
+If you want to adapt a copy of the existing @emph{libreboot} GRUB configuration and use that for the libreboot_grub.cfg file, then follow @ref{#tools,#tools}, @ref{#rom,#rom} and @ref{#extract_testconfig,#extract_testconfig} to get the @strong{@emph{grubtest.cfg}}. Rename @strong{@emph{grubtest.cfg}} to @strong{@emph{libreboot_grub.cfg}} and save it to @strong{@emph{/boot/grub/}} on the running system where it is intended to be used. Modify the file at that location however you see fit, and then stop reading this guide (the rest of this page is irrelevant to you); @strong{in libreboot_grub.cfg on disk, if you are adapting it based on grub.cfg from CBFS then remove the check for libreboot_grub.cfg otherwise it will loop.}.
+
+This is all well and good, but what should you actually put in your GRUB configuration file? Read @uref{grub_config.html,grub_config.html} for more information.
+
+@ref{#pagetop,Back to top of page.}
+
+@node 2nd option re-flash
+@section 2nd option: re-flash
+@anchor{#nd-option-re-flash}
+You can modify what is stored inside the flash chip quite easily. Read on to find out how.
+
+@ref{#pagetop,Back to top of page.}
+
+@node Acquire the necessary utilities
+@section Acquire the necessary utilities
+@anchor{#acquire-the-necessary-utilities}
+Use @strong{@emph{cbfstool}} and @strong{@emph{flashrom}}. There are available in the @emph{libreboot_util} release archive, or they can be compiled (see @uref{../git/index.html#build_flashrom,../git/index.html#build_flashrom}). Flashrom is also available from the repositories:@* # @strong{pacman -S flashrom}
+
+@ref{#pagetop,Back to top of page.}
+
+@node Acquiring the correct ROM image
+@section Acquiring the correct ROM image
+@anchor{#acquiring-the-correct-rom-image}
+You can either work directly with one of the ROM images already included in the libreboot ROM archives, or re-use the ROM that you have currently flashed. For the purpose of this tutorial it is assumed that your ROM image file is named @emph{libreboot.rom}, so please make sure to adapt.
+
+ROM images are included pre-compiled in libreboot. You can also dump your current firmware, using flashrom:@* $ @strong{sudo flashrom -p internal -r libreboot.rom}@* # @strong{flashrom -p internal -r libreboot.rom}@* If you are told to specify the chip, add the option @strong{-c @{your chip@}} to the command, for example:@* # @strong{flashrom -c MX25L6405 -p internal -r libreboot.rom}
+
+@ref{#pagetop,Back to top of page.}
+
+@node Extract grubtestcfg from the ROM image
+@section Extract grubtest.cfg from the ROM image
+@anchor{#extract-grubtest.cfg-from-the-rom-image}
+You can check the contents of the ROM image, inside CBFS:@* @strong{$ cd .../libreboot_util/cbfstool} @strong{$ ./cbfstool libreboot.rom print}
+
+The files @emph{grub.cfg} and @emph{grubtest.cfg} should be present. grub.cfg is loaded by default, with a menuentry for switching to grubtest.cfg. In this tutorial, you will first modify and test @emph{grubtest.cfg}. This is to reduce the possibility of bricking your device, so DO NOT SKIP THIS!
+
+Extract grubtest.cfg from the ROM image:@* @strong{$ ./cbfstool libreboot.rom extract -n grubtest.cfg -f grubtest.cfg}
+
+Modify the grubtest.cfg accordingly.
+
+This is all well and good, but what should you actually put in your GRUB configuration file? Read @uref{grub_config.html,grub_config.html} for more information.
+
+@ref{#pagetop,Back to top of page.}
+
+@node Re-insert the modified grubtestcfg into the ROM image
+@section Re-insert the modified grubtest.cfg into the ROM image
+@anchor{#re-insert-the-modified-grubtest.cfg-into-the-rom-image}
+Once your grubtest.cfg is modified and saved, delete the unmodified config from the ROM image:@* @strong{$ ./cbfstool libreboot.rom remove -n grubtest.cfg}
+
+Next, insert the modified version:@* @strong{$ ./cbfstool libreboot.rom add -n grubtest.cfg -f grubtest.cfg -t raw}
+
+@ref{#pagetop,Back to top of page.}
+
+@node Testing
+@section Testing
+@anchor{#testing}
+@strong{Now you have a modified ROM. Refer back to @uref{../install/index.html#flashrom,../install/index.html#flashrom} for information on how to flash it.@* $ @strong{cd /libreboot_util} # @strong{./flash update libreboot.rom}@* Ocassionally, coreboot changes the name of a given board. If flashrom complains about a board mismatch, but you are sure that you chose the correct ROM image, then run this alternative command:@* # @strong{./flash forceupdate libreboot.rom}@* You should see @strong{"Verifying flash... VERIFIED."} written at the end of the flashrom output. Once you have done that, shut down and then boot up with your new test configuration.}
+
+Choose (in GRUB) the menu entry that switches to grubtest.cfg. If it works, then your config is safe and you can continue below.
+
+@strong{If it does not work like you want it to, if you are unsure or sceptical in any way, then re-do the steps above until you get it right! Do *not* proceed past this point unless you are 100% sure that your new configuration is safe (or desirable) to use.}
+
+@ref{#pagetop,Back to top of page.}
+
+@node Final steps
+@section Final steps
+@anchor{#final-steps}
+When you are satisfied booting from grubtest.cfg, you can create a copy of grubtest.cfg, called grub.cfg. This is the same except for one difference: the menuentry 'Switch to grub.cfg' will be changed to 'Switch to grubtest.cfg' and inside it, all instances of grub.cfg to grubtest.cfg. This is so that the main config still links (in the menu) to grubtest.cfg, so that you don't have to manually switch to it, in case you ever want to follow this guide again in the future (modifying the already modified config). From /libreboot_util/cbfstool, do:@* $ @strong{sed -e 's:(cbfsdisk)/grub.cfg:(cbfsdisk)/grubtest.cfg:g' -e 's:Switch to grub.cfg:Switch to grubtest.cfg:g' < grubtest.cfg > grub.cfg}@*
+
+Delete the grub.cfg that remained inside the ROM:@* @strong{$ ./cbfstool libreboot.rom remove -n grub.cfg}
+
+Add the modified version that you just made:@* @strong{$ ./cbfstool libreboot.rom add -n grub.cfg -f grub.cfg -t raw}
+
+@strong{Now you have a modified ROM. Again, refer back to @uref{../install/index.html#flashrom,../install/index.html#flashrom} for information on how to flash it. It's the same method as you used before. Shut down and then boot up with your new configuration.}
+
+@ref{#pagetop,Back to top of page.}
+
+Copyright © 2014, 2015 Francis Rowe <info@@gluglug.org.uk>@* Copyright © 2015 Jeroen Quint <jezza@@diplomail.ch>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/gnulinux/grub_config.texi b/docs/src/gnulinux/grub_config.texi
new file mode 100644
index 0000000..e0c8520
--- /dev/null
+++ b/docs/src/gnulinux/grub_config.texi
@@ -0,0 +1,119 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title Writing a GRUB configuration file
+@end titlepage
+
+@node Top
+@top Writing a GRUB configuration file
+
+@menu
+* Writing a GRUB configuration file::
+* Table of Contents::
+@end menu
+
+@node Writing a GRUB configuration file
+@chapter Writing a GRUB configuration file
+@anchor{#writing-a-grub-configuration-file}
+This section is for those systems which use the GRUB payload. @strong{If your system uses the depthcharge payload, ignore this section.}
+
+@uref{index.html,Back to index}
+
+@node Table of Contents
+@chapter Table of Contents
+@anchor{#table-of-contents}
+@itemize
+@item
+@ref{#example_modifications,Example modifications for @emph{grubtest.cfg}}
+@itemize
+@item
+@ref{#example_modifications_trisquel,Trisquel GNU/Linux-libre}
+@item
+@ref{#example_modifications_parabola,Parabola GNU/Linux-libre}
+@end itemize
+
+@end itemize
+
+@menu
+* Example modifications for grubtestcfg::
+* Obvious option don't even modify the built-in grubcfg::
+* Trisquel with full disk encryption custom partition layout::
+@end menu
+
+@node Example modifications for grubtestcfg
+@section Example modifications for @emph{grubtest.cfg}
+@anchor{#example-modifications-for-grubtest.cfg}
+These are some common examples of ways in which the grubtest.cfg file can be modified.
+
+@node Obvious option don't even modify the built-in grubcfg
+@section Obvious option: don't even modify the built-in grub.cfg
+@anchor{#obvious-option-dont-even-modify-the-built-in-grub.cfg}
+Use the menuentry that says something like @emph{Search for GRUB outside CBFS}. Assuming that you have a grub.cfg file at /boot/grub/ in your installed distro, this will generate a new menuentry in the GRUB menu. Use that to boot.
+
+Then do this as root:@* $ @strong{cd /boot/grub/}@* $ @strong{ln -s grub.cfg libreboot_grub.cfg}
+
+After that, your system should then boot automatically.
+
+@node Trisquel with full disk encryption custom partition layout
+@section Trisquel with full disk encryption, custom partition layout
+@anchor{#trisquel-with-full-disk-encryption-custom-partition-layout}
+GRUB can boot from a symlink (or symlinks) pointing to your kernel/initramfs, whether from an unencrypted or encrypted /boot/. You can create your own custom symlink(s) but you have to manually update them when updating your kernel. This guide (not maintained by the libreboot project) shows how to configure Trisquel to automatically update that symlink on every kernel update. @uref{http://www.rel4tion.org/people/fr33domlover/libreboot-fix/,http://www.rel4tion.org/people/fr33domlover/libreboot-fix/}
+
+TODO: adapt those notes and put them here. The author said that it was CC-0, so re-licensing under GFDL shouldn't be a problem.
+@menu
+* Trisquel GNU/Linux-libre::
+* Parabola GNU/Linux-libre::
+@end menu
+
+@node Trisquel GNU/Linux-libre
+@subsection Trisquel GNU/Linux-libre
+@anchor{#trisquel-gnulinux-libre}
+As an example, on my test system in /boot/grub/grub.cfg (on the HDD/SSD) I see for the main menu entry:
+
+@itemize
+@item
+@strong{linux /boot/vmlinuz-3.15.1-gnu.nonpae root=UUID=3a008e14-4871-497b-95e5-fb180f277951 ro crashkernel=384M-2G:64M,2G-:128M quiet splash $vt_handoff}
+@item
+@strong{initrd /boot/initrd.img-3.15.1-gnu.nonpae}
+@end itemize
+
+@strong{ro}, @strong{quiet}, @strong{splash}, @strong{crashkernel=384M-2G:64M,2G-:128M} and @strong{$vt_handoff} can be safely ignored.
+
+I use this to get my partition layout:@* $ @strong{lsblk}
+
+In my case, I have no /boot partition, instead /boot is on the same partition as / on sda1. Yours might be different. In GRUB terms, sda means ahci0. 1 means msdos1, or gpt1, depending on whether I am using MBR or GPT partitioning. Thus, /dev/sda1 is GRUB is (ahci0,msdos1) or (ahci0,gpt1). In my case, I use MBR partitioning so it's (ahci0,msdos1). 'msdos' is a GRUB name simply because this partitioning type is traditionally used by MS-DOS. It doesn't mean that you have a proprietary OS.
+
+Trisquel doesn't keep the filenames of kernels consistent, instead it keeps old kernels and new kernel updates are provided with the version in the filename. This can make GRUB payload a bit tricky. Fortunately, there are symlinks /vmlinuz and /initrd.img so if your /boot and / are on the same partition, you can set GRUB to boot from that. These are also updated automatically when installing kernel updates from your distributions apt-get repositories. @strong{Note: when using @uref{http://jxself.org/linux-libre,jxself kernel releases}, these are not updated at all and you have to update them manually.}
+
+For the GRUB payload grubtest.cfg (in the 'Load Operating System' menu entry), we therefore have (in this example):@* @strong{set root='ahci0,msdos1'}@* @strong{linux /vmlinuz root=UUID=3a008e14-4871-497b-95e5-fb180f277951}@* @strong{initrd /initrd.img}
+
+Optionally, you can convert the UUID to its real device name, for example /dev/sda1 in this case. sdX naming isn't very reliable, though, which is why UUID is used for most distributions.
+
+Alternatively, if your /boot is on a separate partition then you cannot rely on the /vmlinuz and /initrd.img symlinks. Instead, go into /boot and create your own symlinks (update them manually when you install a new kernel update).@* $ @strong{sudo -s} (or @strong{su -})@* # @strong{cd /boot/}@* # @strong{rm -f vmlinuz initrd.img}@* # @strong{ln -s yourkernel ksym}@* # @strong{ln -s yourinitrd isym}@* # @strong{exit}
+
+Then your grubtest.cfg menu entry (for payload) becomes like that, for example if / was on sda2 and /boot was on sda1:@* @strong{set root='ahci0,msdos1'}@* @strong{linux /ksym root=/dev/sda2}@* @strong{initrd /isym}
+
+There are lots of possible variations so please try to adapt.
+
+@node Parabola GNU/Linux-libre
+@subsection Parabola GNU/Linux-libre
+@anchor{#parabola-gnulinux-libre}
+You can basically adapt the above. Note however that Parabola does not keep old kernels still installed, and the file names are always consistent, so you don't need to boot from symlinks, you can just use the real thing directly.
+
+@ref{#pagetop,Back to top of page.}
+
+Copyright © 2014, 2015 Francis Rowe <info@@gluglug.org.uk>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/gnulinux/index.texi b/docs/src/gnulinux/index.texi
new file mode 100644
index 0000000..9a0c9df
--- /dev/null
+++ b/docs/src/gnulinux/index.texi
@@ -0,0 +1,58 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title GNU/Linux distributions
+@end titlepage
+
+@node Top
+@top GNU/Linux distributions
+
+@menu
+* GNU/Linux distributions::
+@end menu
+
+@node GNU/Linux distributions
+@chapter GNU/Linux distributions
+@anchor{#gnulinux-distributions}
+This section relates to dealing with GNU/Linux distributions: preparing bootable USB drives, changing the default GRUB menu and so on.
+
+@strong{This section is only for the *GRUB* payload. For depthcharge, instructions have yet to be written.}
+
+@uref{../index.html,Back to previous index}.
+
+@itemize
+@item
+@uref{grub_boot_installer.html,How to install GNU/Linux on a libreboot system}
+@item
+@uref{grub_cbfs.html,How to replace the default GRUB configuration file on a libreboot system}
+@itemize
+@item
+@uref{grub_config.html,Writing a GRUB configuration file}
+@end itemize
+
+@item
+@uref{encrypted_parabola.html,Installing Parabola GNU/Linux-libre with full disk encryption (including /boot)}
+@itemize
+@item
+Follow-up tutorial: @uref{configuring_parabola.html,Configuring Parabola (post-install)}
+@end itemize
+
+@item
+@uref{encrypted_trisquel.html,Installing Trisquel GNU/Linux-libre with full disk encryption (including /boot)}
+@end itemize
+
+Copyright © 2014, 2015 Francis Rowe <info@@gluglug.org.uk>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/grub/index.texi b/docs/src/grub/index.texi
new file mode 100644
index 0000000..3bb55ad
--- /dev/null
+++ b/docs/src/grub/index.texi
@@ -0,0 +1,116 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title GRUB payload
+@end titlepage
+
+@node Top
+@top GRUB payload
+
+@menu
+* GRUB payload::
+* Changing the background image in GRUB::
+* Setting font in GRUB for reference::
+* GRUB keyboard layouts for reference::
+@end menu
+
+@node GRUB payload
+@chapter GRUB payload
+@anchor{#grub-payload}
+This section relates to the GRUB payload used in libreboot.
+
+Or @uref{../index.html,Back to main index}.
+
+@itemize
+@item
+@ref{#grub_background,Changing the background image in GRUB}
+@item
+@ref{#grub_font,Setting font in GRUB}
+@item
+@ref{#grub_keyboard,GRUB keyboard layouts}
+@itemize
+@item
+@ref{#grub_custom_keyboard,Custom keyboard layout in GRUB}
+@item
+@ref{#grub_ukdvorak_keyboard,UK Dvorak keyboard layout in GRUB}
+@end itemize
+
+@end itemize
+
+@node Changing the background image in GRUB
+@chapter Changing the background image in GRUB
+@anchor{#changing-the-background-image-in-grub}
+Use cbfstool from libreboot_util, or libreboot_src/coreboot/util/cbfstool/ if you want to build from source.
+
+./cbfstool yourrom.rom remove background.png -n background.png@* ./cbfstool yourrom.rom add -f background.png -n background.png -t raw
+
+When you've done this, re-flash your ROM and you should have a new background at boot time.
+
+@node Setting font in GRUB for reference
+@chapter Setting font in GRUB (for reference)
+@anchor{#setting-font-in-grub-for-reference}
+You don't need to do this unless you would like to change the default font yourself. (this is just for reference. It has already been done for you)
+
+The old font used was Unifont, and this had some missing characters: for instance, the border showed ??? characters instead of lines.
+
+I tried DeJavu Sans Mono from this website: @uref{http://dejavu-fonts.org/wiki/Download,dejavu-fonts.org}
+
+Specifically, the version that I chose was the latest at the time of writing (Saturday 21 June 2014): @uref{http://sourceforge.net/projects/dejavu/files/dejavu/2.34/dejavu-fonts-ttf-2.34.tar.bz2,this one}
+
+This is a free font that is also contained in GNU/Linux distributions like Trisquel or Parabola.
+
+@strong{$ cd libreboot_src/grub}@* compile grub (the build scripts info on how to do this)@* come back out into libreboot_src/resources/grub:@* @strong{$ cd ../libreboot_src/resources/grub/font}
+
+I took Dejavu Sans Mono from dejavu (included in this version of libreboot) and did:@* @strong{$ ../../../grub/grub-mkfont -o dejavusansmono.pf2 dejavu-fonts-ttf-2.34/ttf/DejaVuSansMono.ttf}
+
+I then added the instructions to 'gen.sh' script in grub-assemble to include resources/grub/dejavusansmono.pf2 in all of the ROM images, at the root of the GRUB memdisk.@* I then added that instructions to the grub.cfg files (to load the font):@* @strong{loadfont (memdisk)/dejavusansmono.pf2}
+
+@ref{#pagetop,Back to top of page}
+
+@node GRUB keyboard layouts for reference
+@chapter GRUB keyboard layouts (for reference)
+@anchor{#grub-keyboard-layouts-for-reference}
+@menu
+* Custom keyboard layout in GRUB for reference::
+* UK Dvorak keyboard layout in GRUB for reference::
+@end menu
+
+@node Custom keyboard layout in GRUB for reference
+@section Custom keyboard layout in GRUB (for reference)
+@anchor{#custom-keyboard-layout-in-grub-for-reference}
+Keymaps are stored in resources/utilities/grub-assemble/keymap/.
+
+Example (French Azerty):@* @strong{$ ckbcomp fr > frazerty}@*@* Go in grub directory:@* @strong{cat frazerty | ./grub/grub-mklayout -o frazerty.gkb}
+
+You must make sure that the files are named keymap and keymap.gkb (where 'keymap' can be whatever you want).
+
+Then from the above example, you would put @strong{frazerty} in @strong{resources/utilities/grub-assemble/keymap/original/} and the @strong{frazerty.gkb} file goes under @strong{resources/utilities/grub-assemble/keymap/}
+
+The build scripts will automatically see this, and automatically build ROM images with your custom layout (given the name) and include them under bin. Example: @strong{libreboot_frazerty.rom}.
+
+@ref{#pagetop,Back to top of page}
+
+@node UK Dvorak keyboard layout in GRUB for reference
+@section UK Dvorak keyboard layout in GRUB (for reference)
+@anchor{#uk-dvorak-keyboard-layout-in-grub-for-reference}
+ukdvorak had to be created manually, based on usdvorak. diff them (under resources/utilities/grub-assemble/keymap/original) to see how ukdvorak file was created
+
+@strong{$ cat ukdvorak | ./grub/grub-mklayout -o ukdvorak.gkb}
+
+@ref{#pagetop,Back to top of page}
+
+Copyright © 2014 Francis Rowe <info@@gluglug.org.uk>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/hardware/index.texi b/docs/src/hardware/index.texi
new file mode 100644
index 0000000..0e915b0
--- /dev/null
+++ b/docs/src/hardware/index.texi
@@ -0,0 +1,48 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title Hardware maintenance
+@end titlepage
+
+@node Top
+@top Hardware maintenance
+
+@menu
+* Hardware maintenance::
+@end menu
+
+@node Hardware maintenance
+@chapter Hardware maintenance
+@anchor{#hardware-maintenance}
+This section relates to hardware maintenance on supported targets.
+
+@uref{../index.html,Back to previous index}.
+
+@itemize
+@item
+@uref{x60_keyboard.html,ThinkPad X60/X60s/X60T: Change keyboard} (the procedure on X200/X200S/X200T is almost identical)
+@item
+@uref{x60_heatsink.html,ThinkPad X60/X60S: change the fan/heatsink}
+@item
+@uref{x60_lcd_change.html,ThinkPad X60/X60s: How to change the LCD panel} (incomplete. pics only for now)
+@item
+@uref{t60_lcd_15.html,ThinkPad T60 15.1" changing LCD panel}
+@item
+@uref{t60_heatsink.html,ThinkPad T60: change the fan/heatsink}
+@end itemize
+
+Copyright © 2014, 2015 Francis Rowe <info@@gluglug.org.uk>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/hardware/t60_heatsink.texi b/docs/src/hardware/t60_heatsink.texi
new file mode 100644
index 0000000..41ff0a9
--- /dev/null
+++ b/docs/src/hardware/t60_heatsink.texi
@@ -0,0 +1,91 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title Changing the heatsink or CPU on a ThinkPad T60
+@end titlepage
+
+@node Top
+@top Changing the heatsink or CPU on a ThinkPad T60
+
+@menu
+* Changing heatsink or CPU on the ThinkPad T60::
+* Hardware requirements::
+* Software requirements::
+* Disassembly::
+@end menu
+
+@node Changing heatsink or CPU on the ThinkPad T60
+@chapter Changing heatsink (or CPU) on the ThinkPad T60
+@anchor{#changing-heatsink-or-cpu-on-the-thinkpad-t60}
+Using this guide you can also change/upgrade the CPU.
+
+@uref{index.html,Back to previous index}
+
+@node Hardware requirements
+@chapter Hardware requirements
+@anchor{#hardware-requirements}
+@itemize
+@item
+rubbing alcohol or isopropyl alcohol, and thermal compound for changing CPU heatsink (procedure involves removing heatsink)
+@item
+thermal compound/paste (Arctic MX-4 is good. Others are also good.)
+@end itemize
+
+@node Software requirements
+@chapter Software requirements
+@anchor{#software-requirements}
+@itemize
+@item
+xsensors
+@item
+stress
+@end itemize
+
+@node Disassembly
+@chapter Disassembly
+@anchor{#disassembly}
+Remove those screws and remove the HDD:@* @image{../resources/images/t60_dev/0001,,,,JPG} @image{../resources/images/t60_dev/0002,,,,JPG}
+
+Lift off the palm rest:@* @image{../resources/images/t60_dev/0003,,,,JPG}
+
+Lift up the keyboard, pull it back a bit, flip it over like that and then disconnect it from the board:@* @image{../resources/images/t60_dev/0004,,,,JPG} @image{../resources/images/t60_dev/0005,,,,JPG} @image{../resources/images/t60_dev/0006,,,,JPG}
+
+Gently wedge both sides loose:@* @image{../resources/images/t60_dev/0007,,,,JPG} @image{../resources/images/t60_dev/0008,,,,JPG}
+
+Remove that cable from the position:@* @image{../resources/images/t60_dev/0009,,,,JPG} @image{../resources/images/t60_dev/0010,,,,JPG}
+
+Remove the bezel (sorry forgot to take pics).
+
+On the CPU (and there is another chip south-east to it, sorry forgot to take pic) clean off the old thermal paste (with the alcohol) and apply new (Artic Silver 5 is good, others are good too) you should also clean the heatsink the same way@* @image{../resources/images/t60_dev/0051,,,,JPG}
+
+This is also an opportunity to change the CPU to another one. For example if you had a Core Duo T2400, you can upgrade it to a better processor (higher speed, 64-bit support). A Core 2 Duo T7600 was installed here.
+
+Attach the heatsink and install the screws (also, make sure to install the AC jack as highlighted):@* @image{../resources/images/t60_dev/0052,,,,JPG}
+
+Reinstall that upper bezel:@* @image{../resources/images/t60_dev/0053,,,,JPG}
+
+Do that:@* @image{../resources/images/t60_dev/0054,,,,JPG} @image{../resources/images/t60_dev/0055,,,,JPG}
+
+Attach keyboard:@* @image{../resources/images/t60_dev/0056,,,,JPG}
+
+Place keyboard and (sorry, forgot to take pics) reinstall the palmrest and insert screws on the underside:@* @image{../resources/images/t60_dev/0058,,,,JPG}
+
+It lives!@* @image{../resources/images/t60_dev/0071,,,,JPG} @image{../resources/images/t60_dev/0072,,,,JPG} @image{../resources/images/t60_dev/0073,,,,JPG}
+
+Always stress test ('stress -c 2' and xsensors. below 90C is ok) when replacing cpu paste/heatsink:@* @image{../resources/images/t60_dev/0074,,,,JPG}
+
+Copyright © 2014, 2015 Francis Rowe <info@@gluglug.org.uk>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/hardware/t60_lcd_15.texi b/docs/src/hardware/t60_lcd_15.texi
new file mode 100644
index 0000000..3eb0b90
--- /dev/null
+++ b/docs/src/hardware/t60_lcd_15.texi
@@ -0,0 +1,59 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title Changing LCD panel on 15.1 inch T60
+@end titlepage
+
+@node Top
+@top Changing LCD panel on 15.1 inch T60
+
+@menu
+* Changing the LCD panel on a 151" T60::
+* Disassembly::
+@end menu
+
+@node Changing the LCD panel on a 151" T60
+@chapter Changing the LCD panel on a 15.1" T60
+@anchor{#changing-the-lcd-panel-on-a-15.1-t60}
+This is for the 15.1" T60. If you have another size then the procedure will differ; for example, on 14.1" you have to remove the hinges and the procedure is a bit more involved than on 15.1".
+
+@uref{index.html,Back to previous index}
+
+@node Disassembly
+@chapter Disassembly
+@anchor{#disassembly}
+Remove those covers and unscrew:@* @image{../resources/images/t60_dev/0059,,,,JPG} @image{../resources/images/t60_dev/0060,,,,JPG} @image{../resources/images/t60_dev/0061,,,,JPG}
+
+Gently pry off the front bezel.
+
+Remove inverter board:@* @image{../resources/images/t60_dev/0064,,,,JPG}
+
+Disconnect LCD cable:@* @image{../resources/images/t60_dev/0065,,,,JPG}
+
+Remove the panel:@* @image{../resources/images/t60_dev/0066,,,,JPG}
+
+Move the rails (left and right side) from the old panel to the new one and then attach LCD cable:@* @image{../resources/images/t60_dev/0068,,,,JPG}
+
+Insert panel (this one is an LG-Philips LP150E05-A2K1, and there are others. See @uref{../hcl/index.html#supported_t60_list,../hcl/index.html#supported_t60_list}):@* @image{../resources/images/t60_dev/0069,,,,JPG}
+
+Insert new inverter board (see @uref{../hcl/index.html#supported_t60_list,../hcl/index.html#supported_t60_list} for what is recommended on your LCD panel):@* @image{../resources/images/t60_dev/0070,,,,JPG}
+
+Now re-attach the front bezel and put all the screws in.
+
+It lives!@* @image{../resources/images/t60_dev/0071,,,,JPG} @image{../resources/images/t60_dev/0072,,,,JPG} @image{../resources/images/t60_dev/0073,,,,JPG}
+
+Copyright © 2014, 2015 Francis Rowe <info@@gluglug.org.uk>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/hardware/x60_heatsink.texi b/docs/src/hardware/x60_heatsink.texi
new file mode 100644
index 0000000..3930e3f
--- /dev/null
+++ b/docs/src/hardware/x60_heatsink.texi
@@ -0,0 +1,116 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title Libreboot documentation: Switch heatsink on ThinkPad X60
+@end titlepage
+
+@node Top
+@top Libreboot documentation: Switch heatsink on ThinkPad X60
+
+@menu
+* Changing the fan/heatsink on the ThinkPad X60::
+* Table of Contents::
+* Hardware requirements::
+* Software requirements for CPU stress testing::
+* Disassembly::
+@end menu
+
+@node Changing the fan/heatsink on the ThinkPad X60
+@chapter Changing the fan/heatsink on the ThinkPad X60
+@anchor{#changing-the-fanheatsink-on-the-thinkpad-x60}
+This guide will teach you how to replace the fan and heatsink on your ThinkPad X60.
+
+@uref{index.html,Back to main index}
+
+@node Table of Contents
+@chapter Table of Contents
+@anchor{#table-of-contents}
+@itemize
+@item
+@ref{#hardware_requirements,Hardware Requirements}
+@item
+@ref{#software_requirements,Software Requirements}
+@item
+@ref{#procedure,Disassembly}
+@end itemize
+
+@node Hardware requirements
+@chapter Hardware requirements
+@anchor{#hardware-requirements}
+@itemize
+@item
+isopropyl alcohol (sometimes called rubbing alcohol)
+@item
+your new fan and/or heatsink
+@item
+CPU thermal compound (some say Arctic MX-4 is good, others are also 'ok')
+@item
+Something to spread the paste with
+@end itemize
+
+@node Software requirements for CPU stress testing
+@chapter Software requirements (for CPU stress testing)
+@anchor{#software-requirements-for-cpu-stress-testing}
+@itemize
+@item
+xsensors utility
+@item
+stress utility
+@end itemize
+
+@node Disassembly
+@chapter Disassembly
+@anchor{#disassembly}
+Remove those screws:@* @image{../resources/images/x60_heatsink/0000,,,,jpg}
+
+Push the keyboard forward (carefully):@* @image{../resources/images/x60_heatsink/0001,,,,jpg}
+
+Lift the keyboard up and disconnect it from the board:@* @image{../resources/images/x60_heatsink/0002,,,,jpg}
+
+Grab the right-hand side of the chassis and force it off (gently) and pry up the rest of the chassis:@* @image{../resources/images/x60_heatsink/0003,,,,jpg}
+
+You should now have this:@* @image{../resources/images/x60_heatsink/0004,,,,jpg}
+
+Disconnect the wifi antenna cables, the modem cable and the speaker:@* @image{../resources/images/x60_heatsink/0005,,,,jpg}
+
+Unroute the cables along their path, carefully lifting the tape that holds them in place. Then, disconnect the modem cable (other end) and power connection and unroute all the cables so that they dangle by the monitor hinge on the right-hand side:@* @image{../resources/images/x60_heatsink/0006,,,,jpg}
+
+Disconnect the monitor from the motherboard, and unroute the grey antenna cable, carefully lifting the tape that holds it into place:@* @image{../resources/images/x60_heatsink/0008,,,,jpg}
+
+Carefully lift the remaining tape and unroute the left antenna cable so that it is loose:@* @image{../resources/images/x60_heatsink/0009,,,,jpg}
+
+Remove those screws:@* @image{../resources/images/x60_heatsink/0011,,,,jpg}
+
+Remove those screws:@* @image{../resources/images/x60_heatsink/0012,,,,jpg}
+
+Carefully remove the plate, like so:@* @image{../resources/images/x60_heatsink/0013,,,,jpg}
+
+Remove the SATA connector:@* @image{../resources/images/x60_heatsink/0014,,,,jpg}
+
+Now remove the motherboard (gently) and cast the lcd/chassis aside:@* @image{../resources/images/x60_heatsink/0015,,,,jpg}
+
+Look at that black tape above the heatsink, remove it:@* @image{../resources/images/x60_heatsink/0016,,,,jpg}
+
+Now you have removed it:@* @image{../resources/images/x60_heatsink/0017,,,,jpg}
+
+Disconnect the fan and remove all the screws, heatsink will easily come off:@* @image{../resources/images/x60_heatsink/0018,,,,jpg}
+
+Remove the old paste with a cloth (from the CPU and heatsink) and then clean both of them with the alcohol (to remove remaining residue of the paste). Apply a pea-sized amount of paste to the both chipsets that the heatsink covered and spread it evenly (uniformally). Finally reinstall the heatsink, reversing previous steps.
+
+@strong{stress -c 2} command can be used to push the CPU to 100%, and @strong{xsensors} (or @strong{watch sensors} command) can be used to monitor heat. Below 90C is ok.
+
+Copyright © 2014, 2015 Francis Rowe <info@@gluglug.org.uk>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/hardware/x60_keyboard.texi b/docs/src/hardware/x60_keyboard.texi
new file mode 100644
index 0000000..69e2e83
--- /dev/null
+++ b/docs/src/hardware/x60_keyboard.texi
@@ -0,0 +1,43 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title ThinkPad X60: Change keyboard
+@end titlepage
+
+@node Top
+@top ThinkPad X60: Change keyboard
+
+@menu
+* Thinkpad X60/X60s/X60t Change keyboard::
+* Just follow these steps and then reverse::
+@end menu
+
+@node Thinkpad X60/X60s/X60t Change keyboard
+@chapter Thinkpad X60/X60s/X60t: Change keyboard
+@anchor{#thinkpad-x60x60sx60t-change-keyboard}
+Use this guide to replace the keyboard on your ThinkPad X60. Also works for X60s and X60 Tablet.
+
+Although slightly different, this guide can also be followed for the ThinkPad X200, X200S and X200 Tablet. The screws are in more or less the same place, and it's the same procedure.
+
+@uref{index.html,Back to previous index}
+
+@node Just follow these steps and then reverse
+@chapter Just follow these steps, and then reverse
+@anchor{#just-follow-these-steps-and-then-reverse}
+@image{../resources/images/x60_keyboard/1,,,,JPG}@* @image{../resources/images/x60_keyboard/2,,,,JPG}@* @image{../resources/images/x60_keyboard/3,,,,JPG}@* @image{../resources/images/x60_keyboard/4,,,,JPG}@* @image{../resources/images/x60_keyboard/5,,,,JPG}
+
+Copyright © 2014, 2015 Francis Rowe <info@@gluglug.org.uk>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/hardware/x60_lcd_change.texi b/docs/src/hardware/x60_lcd_change.texi
new file mode 100644
index 0000000..6061b90
--- /dev/null
+++ b/docs/src/hardware/x60_lcd_change.texi
@@ -0,0 +1,37 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title Libreboot documentation: Unbricking the ThinkPad T60
+@end titlepage
+
+@node Top
+@top Libreboot documentation: Unbricking the ThinkPad T60
+
+@menu
+* Changing the LCD panel on X60::
+@end menu
+
+@node Changing the LCD panel on X60
+@chapter Changing the LCD panel on X60
+@anchor{#changing-the-lcd-panel-on-x60}
+This tutorial is incomplete, and only pictures for now.
+
+@uref{index.html,Back to previous index}
+
+@image{../resources/images/x60_lcd_change/0001,,,,JPG} @image{../resources/images/x60_lcd_change/0002,,,,JPG} @image{../resources/images/x60_lcd_change/0003,,,,JPG} @image{../resources/images/x60_lcd_change/0004,,,,JPG} @image{../resources/images/x60_lcd_change/0005,,,,JPG} @image{../resources/images/x60_lcd_change/0006,,,,JPG} @image{../resources/images/x60_lcd_change/0007,,,,JPG}
+
+Copyright © 2014, 2015 Francis Rowe <info@@gluglug.org.uk>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/hcl/c201.texi b/docs/src/hcl/c201.texi
new file mode 100644
index 0000000..28ed66e
--- /dev/null
+++ b/docs/src/hcl/c201.texi
@@ -0,0 +1,161 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title ASUS Chromebook C201
+@end titlepage
+
+@node Top
+@top ASUS Chromebook C201
+
+@menu
+* ASUS Chromebook C201::
+* Google's intent with CrOS devices::
+* Considerations about ChromeOS and free operating systems::
+* Caution Video acceleration requires a non-free blob software rendering can be used instead::
+* Caution WiFi requires a non-free blob a USB dongle can be used instead::
+* EC firmware is free software!::
+* No microcode!::
+* Depthcharge payload::
+* Flash chip write protection the screw::
+@end menu
+
+@node ASUS Chromebook C201
+@chapter ASUS Chromebook C201
+@anchor{#asus-chromebook-c201}
+This is a Chromebook, using the Rockchip RK3288 SoC. It uses an ARM CPU, and has free EC firmware (unlike some other laptops). More RK3288-based laptops will be added to libreboot at a later date.
+
+Paul Kocialkowski, a @uref{http://www.replicant.us/,Replicant} developer, ported this laptop to libreboot. Thank you, Paul!
+
+@strong{NOTE: This board is unsupported in libreboot 20150518. To use it in libreboot, for now, you must build for it from source using the libreboot git repository. Note that we recommend building for it from an x86 host, until libreboot's build system is modified accordingly.}
+
+@strong{More info will be added later, including build/installation instructions. The board is supported in libreboot, however, and has been confirmed to work.}
+
+Flashing instructions can be found at @uref{../install/index.html#flashrom,../install/index.html#flashrom}
+
+@uref{index.html,Back to previous index}.
+
+@itemize
+@item
+@ref{#googlesintent,Google's intent with CrOS devices}
+@item
+@ref{#os,Considerations about ChromeOS and free operating systems}
+@item
+@ref{#videoblobs,Caution: Video acceleration requires a non-free blob, software rendering can be used instead.}
+@item
+@ref{#wifiblobs,Caution: WiFi requires a non-free blob, a USB dongle can be used instead.}
+@item
+@ref{#ec,EC firmware is free software!}
+@item
+@ref{#microcode,No microcode!}
+@item
+@ref{#depthcharge,Depthcharge payload}
+@item
+@ref{#thescrew,Flash chip write protection: the screw}
+@end itemize
+
+@node Google's intent with CrOS devices
+@chapter Google's intent with CrOS devices
+@anchor{#googles-intent-with-cros-devices}
+CrOS (Chromium OS/Chrome OS) devices, such as Chromebooks, were not designed with the intent of bringing more freedom to users. However, they run with a lot of free software at the boot software and embedded controller levels, since free software gives Google enough flexibility to optimize various aspects such as boot time and most importantly, to implement the CrOS security system, that involves various aspects of the software. Google does hire a lot of Coreboot developers, who are generally friendly to the free software movement and try to be good members of the free software community, by contributing code back.
+
+CrOS devices are designed (from the factory) to actually coax the user into using @uref{https://www.gnu.org/philosophy/who-does-that-server-really-serve.en.html,proprietary web services} (SaaSS) that invade the user's privacy (ChromeOS is literally just the Google Chrome browser when you boot up, itself proprietary and comes with proprietary add-ons like flash. It's only intended for SaaSS, not actual, real computing). Google is even a member of the @emph{PRISM} program, as outlined by Edward Snowden. See notes about ChromeOS below. The libreboot project recommends that the user replace the default @emph{ChromeOS} with a distribution that can be used in freedom, without invading the user's privacy.
+
+We also use a similar argument for the MacBook and the ThinkPads that are supported in libreboot. Those laptops are supported, in spite of Apple and Lenovo, companies which are actually @emph{hostile} to the free software movement.
+
+@ref{#pagetop,Back to top of page}.
+
+@node Considerations about ChromeOS and free operating systems
+@chapter Considerations about ChromeOS and free operating systems
+@anchor{#considerations-about-chromeos-and-free-operating-systems}
+This laptop comes preinstalled (from the factory) with Google ChromeOS. This is a GNU/Linux distribution, but it's not general purpose and it comes with proprietary software. It's designed for @emph{@uref{https://www.gnu.org/philosophy/who-does-that-server-really-serve.en.html,SaaSS}}. Libreboot recommends that users of this laptop replace it with another distribution.
+@menu
+* No FSF-endorsed distros available::
+@end menu
+
+@node No FSF-endorsed distros available
+@section No FSF-endorsed distros available
+@anchor{#no-fsf-endorsed-distros-available}
+The FSF has a @uref{https://www.gnu.org/distros/free-distros.html,list of distributions} that are 100% free software. None of these are confirmed to work on ARM CrOS devices yet. Parabola looks hopeful: @uref{https://www.parabola.nu/news/parabola-supports-armv7/,https://www.parabola.nu/news/parabola-supports-armv7/}
+
+The libreboot project would like to see all FSF-endorsed distro projects port to these laptops. This includes Trisquel, GuixSD and others. And ProteanOS. Maybe even LibreCMC. The more the merrier. We need them, badly.
+
+@strong{We need these distributions to be ported as soon as possible.}
+
+@ref{#pagetop,Back to top of page}.
+
+@node Caution Video acceleration requires a non-free blob software rendering can be used instead
+@chapter Caution: Video acceleration requires a non-free blob, software rendering can be used instead.
+@anchor{#caution-video-acceleration-requires-a-non-free-blob-software-rendering-can-be-used-instead.}
+The lima driver source code for the onboard Mali GPU is not released. The developer withheld it for personal reasons. Until that is released, the only way to use video (in freedom) on this laptop is to not have video acceleration, by making sure not to install the relevant blob. Most tasks can still be performed without video acceleration, without any noticeable performance penalty.
+
+In practise, this means that certain things like games, blender and GNOME shell (or other fancy desktops) won't work well. The libreboot project recommends a lightweight desktop which does not need video acceleration, such as @emph{XFCE} or @emph{LXDE}.
+
+The lima developer wrote this blog post, which sheds light on the story: @uref{http://libv.livejournal.com/27461.html,http://libv.livejournal.com/27461.html}
+
+@ref{#pagetop,Back to top of page}.
+
+@node Caution WiFi requires a non-free blob a USB dongle can be used instead
+@chapter Caution: WiFi requires a non-free blob, a USB dongle can be used instead.
+@anchor{#caution-wifi-requires-a-non-free-blob-a-usb-dongle-can-be-used-instead.}
+These laptops have non-removeable (soldered on) WiFi chips, which require non-free firmware in the Linux kernel in order to work.
+
+The libreboot project recommends using an external USB wifi dongle that works with free software. See @uref{index.html#recommended_wifi,index.html#recommended_wifi}.
+
+There are 2 companies (endorsed by the Free Software Foundation, under their @emph{Respects your Freedom} guidelines), that sell USB WiFi dongles guaranteed to work with free software (i.e. linux-libre kernel):
+
+@itemize
+@item
+@uref{https://www.thinkpenguin.com/gnu-linux/penguin-wireless-n-usb-adapter-gnu-linux-tpe-n150usb,ThinkPenguin sells them} (company based in USA)
+@item
+@uref{https://tehnoetic.com/tehnoetic-wireless-adapter-gnu-linux-libre-tet-n150,Tehnoetic sells them} (company based in Europe)
+@end itemize
+
+These wifi dongles use the AR9271 (atheros) chipset, supported by the free @emph{ath9k_htc} driver in the Linux kernel. They work in @emph{linux-libre} too.
+
+@node EC firmware is free software!
+@chapter EC firmware is free software!
+@anchor{#ec-firmware-is-free-software}
+It's free software. Google provides the source. Build scripts will be added later, with EC sources provided in libreboot, and builds of the EC firmware.
+
+This is unlike the other current libreboot laptops (Intel based). In practise, you can (if you do without the video/wifi blobs, and replace ChromeOS with a distribution that respects your freedom) be more free when using one of these laptops.
+
+The libreboot FAQ briefly describes what an @emph{EC} is: @uref{http://libreboot.org/faq/#firmware-ec,http://libreboot.org/faq/#firmware-ec}
+
+@node No microcode!
+@chapter No microcode!
+@anchor{#no-microcode}
+Unlike x86 (e.g. Intel/AMD) CPUs, ARM CPUs do not use microcode, not even built in. On the Intel/AMD based libreboot systems, there is still microcode in the CPU (not considered problematic by the FSF, provided that it is reasonably trusted to not be malicious, since it's part of the hardware and read-only), but we exclude microcode updates (volatile updates which are uploaded at boot time by the boot firmware, if present), which are proprietary software.
+
+On ARM CPUs, the instruction set is implemented in circuitry, without microcode.
+
+@ref{#pagetop,Back to top of page}.
+
+@node Depthcharge payload
+@chapter Depthcharge payload
+@anchor{#depthcharge-payload}
+These systems do not use the GRUB payload. Instead, they use a payload called depthcharge, which is common on CrOS devices. This is free software, maintained by Google.
+
+@node Flash chip write protection the screw
+@chapter Flash chip write protection: the screw
+@anchor{#flash-chip-write-protection-the-screw}
+It's next to the flash chip. Unscrew it, and the flash chip is read-write. Screw it back in, and the flash chip is read-only. It's called the screw.
+
+@emph{The screw} is accessible by removing other screws and gently prying off the upper shell, where the flash chip and the screw are then directly accessible. User flashing from software is possible, without having to externally re-flash, but the flash chip is SPI (SOIC-8 form factor) so you can also externally re-flash if you want to. In practise, you only need to externally re-flash if you brick the laptop; read @uref{../install/bbb_setup.html,../install/bbb_setup.html} for an example of how to set up an SPI programmer.
+
+Write protection is useful, because it prevents the firmware from being re-flashed by any malicious software that might become executed on your GNU/Linux system, as root. In other words, it can prevent a firmware-level @emph{evil maid} attack. It's possible to write protect on all current libreboot systems, but CrOS devices make it easy. The screw is such a stupidly simple idea, which all designs should implement.
+
+Copyright © 2015 Francis Rowe <info@@gluglug.org.uk>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/hcl/gm45_lcd.texi b/docs/src/hcl/gm45_lcd.texi
new file mode 100644
index 0000000..e1e87e1
--- /dev/null
+++ b/docs/src/hcl/gm45_lcd.texi
@@ -0,0 +1,298 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title LCD compatibility on GM45 laptops
+@end titlepage
+
+@node Top
+@top LCD compatibility on GM45 laptops
+
+@menu
+* LCD compatibility on GM45 laptops::
+* The problem::
+* Current workaround::
+* Differences in dmesg kernel parameter added ::
+@end menu
+
+@node LCD compatibility on GM45 laptops
+@chapter LCD compatibility on GM45 laptops
+@anchor{#lcd-compatibility-on-gm45-laptops}
+On the T400 and T500 (maybe others), some of the higher resolution panels (e.g. 1440x900, 1680x1050, 1920x1200) fail in libreboot.
+
+It is currently unknown, whether there exist any compatibility issues on the ThinkPad R500.
+
+@strong{All X200/X200S/X200T LCD panels are believed to be compatible.}
+
+@uref{index.html,Back to previous index}.
+
+@node The problem
+@chapter The problem
+@anchor{#the-problem}
+In some cases, backlight turns on during boot, sometimes not. In all cases, no display is shown in GRUB, nor in GNU/Linux.
+
+@node Current workaround
+@chapter Current workaround:
+@anchor{#current-workaround}
+Libreboot (git, and releases after 20150518) now automatically detect whether to use single or dual link LVDS configuration. If you're using an older version, use the instructions below. In practise, this means that you'll get a visual display when booting GNU/Linux, but not in GRUB (payload).
+
+The i915 module in the Linux kernel also provides an option to set the LVDS link configuration. i915.lvds_channel_mode:Specify LVDS channel mode (0=probe BIOS [default], 1=single-channel, 2=dual-channel) (int) - from /sbin/modinfo i915 - use @strong{i915.lvds_channel_mode=2} as a kernel option in grub.cfg.
+
+@node Differences in dmesg kernel parameter added
+@chapter Differences in dmesg (kernel parameter added: )
+@anchor{#differences-in-dmesg-kernel-parameter-added}
+@uref{https://01.org/linuxgraphics/documentation/how-report-bugs,https://01.org/linuxgraphics/documentation/how-report-bugs}
+
+These panels all work in the original firmware, so the idea is to see what differences there are in how coreboot handles them.
+
+@uref{http://www.coreboot.org/pipermail/coreboot/attachments/20150712/d2e214bb/attachment-0002.txt,dmesg with coreboot-libre} (coreboot) - See: @emph{[drm:intel_lvds_init] detected single-link lvds configuration}
+
+@uref{http://www.coreboot.org/pipermail/coreboot/attachments/20150712/d2e214bb/attachment-0003.txt,dmesg with lenovobios} (lenovobios) - For the same line, it says dual-channel lvds configuration.
+@menu
+* EDID::
+@end menu
+
+@node EDID
+@section EDID
+@anchor{#edid}
+One T500 had a screen (1920x1200) that is currently incompatible. Working to fix it. EDID:
+
+@verbatim
+user@user-ThinkPad-T500:~/Desktop$ sudo i2cdump -y 2 0x50
+No size specified (using byte-data access)
+ 0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef
+00: XX ff ff ff ff ff ff 00 30 ae 55 40 00 00 00 00 X.......0?U@....
+10: 00 11 01 03 80 21 15 78 ea ba 70 98 59 52 8c 28 .????!?x??p?YR?(
+20: 25 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01 %PT...??????????
+30: 01 01 01 01 01 01 e7 3a 80 8c 70 b0 14 40 1e 50 ???????:??p??@?P
+40: 24 00 4b cf 10 00 00 19 16 31 80 8c 70 b0 14 40 $.K??..??1??p??@
+50: 1e 50 24 00 4b cf 10 00 00 19 00 00 00 0f 00 d1 ?P$.K??..?...?.?
+60: 0a 32 d1 0a 28 11 01 00 32 0c 00 00 00 00 00 fe ?2??(??.2?.....?
+70: 00 4c 50 31 35 34 57 55 31 2d 54 4c 42 31 00 9a .LP154WU1-TLB1.?
+80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
+90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
+a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
+b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
+c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
+d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
+e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
+f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
+@end verbatim
+
+What happens: backlight turns on at boot, then turns off. At no point is there a working visual display.
+
+Another incompatible screen (EDID) 1680 x 1050 with the same issue:
+
+@verbatim
+EDID:
+00 ff ff ff ff ff ff 00 30 ae 53 40 00 00 00 00
+00 11 01 03 80 21 15 78 ea cd 75 91 55 4f 8b 26
+21 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
+01 01 01 01 01 01 a8 2f 90 e0 60 1a 10 40 20 40
+13 00 4b cf 10 00 00 19 b7 27 90 e0 60 1a 10 40
+20 40 13 00 4b cf 10 00 00 19 00 00 00 0f 00 b3
+0a 32 b3 0a 28 14 01 00 4c a3 50 33 00 00 00 fe
+00 4c 54 4e 31 35 34 50 33 2d 4c 30 32 0a 00 7e
+Extracted contents:
+header: 00 ff ff ff ff ff ff 00
+serial number: 30 ae 53 40 00 00 00 00 00 11
+version: 01 03
+basic params: 80 21 15 78 ea
+chroma info: cd 75 91 55 4f 8b 26 21 50 54
+established: 00 00 00
+standard: 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
+descriptor 1: a8 2f 90 e0 60 1a 10 40 20 40 13 00 4b cf 10 00 00 19
+descriptor 2: b7 27 90 e0 60 1a 10 40 20 40 13 00 4b cf 10 00 00 19
+descriptor 3: 00 00 00 0f 00 b3 0a 32 b3 0a 28 14 01 00 4c a3 50 33
+descriptor 4: 00 00 00 fe 00 4c 54 4e 31 35 34 50 33 2d 4c 30 32 0a
+extensions: 00
+checksum: 7e
+
+Manufacturer: LEN Model 4053 Serial Number 0
+Made week 0 of 2007
+EDID version: 1.3
+Digital display
+Maximum image size: 33 cm x 21 cm
+Gamma: 220%
+Check DPMS levels
+DPMS levels: Standby Suspend Off
+Supported color formats: RGB 4:4:4, YCrCb 4:2:2
+First detailed timing is preferred timing
+Established timings supported:
+Standard timings supported:
+Detailed timings
+Hex of detail: a82f90e0601a1040204013004bcf10000019
+Did detailed timing
+Detailed mode (IN HEX): Clock 122000 KHz, 14b mm x cf mm
+ 0690 06b0 06f0 0770 hborder 0
+ 041a 041b 041e 042a vborder 0
+ -hsync -vsync
+Hex of detail: b72790e0601a1040204013004bcf10000019
+Detailed mode (IN HEX): Clock 122000 KHz, 14b mm x cf mm
+ 0690 06b0 06f0 0770 hborder 0
+ 041a 041b 041e 042a vborder 0
+ -hsync -vsync
+Hex of detail: 0000000f00b30a32b30a281401004ca35033
+Manufacturer-specified data, tag 15
+Hex of detail: 000000fe004c544e31353450332d4c30320a
+ASCII string: LTN154P3-L02
+Checksum
+Checksum: 0x7e (valid)
+WARNING: EDID block does NOT fully conform to EDID 1.3.
+ Missing name descriptor
+ Missing monitor ranges
+bringing up panel at resolution 1680 x 1050
+Borders 0 x 0
+Blank 224 x 16
+Sync 64 x 3
+Front porch 32 x 1
+Spread spectrum clock
+Single channel
+Polarities 1, 1
+Data M1=2132104, N1=8388608
+Link frequency 270000 kHz
+Link M1=236900, N1=524288
+Pixel N=9, M1=24, M2=8, P1=1
+Pixel clock 243809 kHz
+waiting for panel powerup
+panel powered up
+@end verbatim
+
+Another incompatible (T400) screen:
+
+@verbatim
+No size specified (using byte-data access)
+ 0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef
+00: XX ff ff ff ff ff ff 00 30 ae 33 40 00 00 00 00 X.......0?3@....
+10: 00 0f 01 03 80 1e 13 78 ea cd 75 91 55 4f 8b 26 .??????x??u?UO?&
+20: 21 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01 !PT...??????????
+30: 01 01 01 01 01 01 b0 27 a0 60 51 84 2d 30 30 20 ???????'?`Q?-00
+40: 36 00 2f be 10 00 00 19 d5 1f a0 40 51 84 1a 30 6./??..????@Q??0
+50: 30 20 36 00 2f be 10 00 00 19 00 00 00 0f 00 90 0 6./??..?...?.?
+60: 0a 32 90 0a 28 14 01 00 4c a3 42 44 00 00 00 fe ?2??(??.L?BD...?
+70: 00 4c 54 4e 31 34 31 57 44 2d 4c 30 35 0a 00 32 .LTN141WD-L05?.2
+80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
+90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
+a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
+b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
+c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
+d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
+e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
+f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
+@end verbatim
+
+For comparison, here is a working display (T400 screen, but was connected to a T500. Some T500 displays also work, but no EDID available on this page yet):
+
+@verbatim
+EDID:
+00 ff ff ff ff ff ff 00 30 ae 31 40 00 00 00 00
+00 12 01 03 80 1e 13 78 ea b3 85 95 58 53 8a 28
+25 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
+01 01 01 01 01 01 26 1b 00 7d 50 20 16 30 30 20
+36 00 30 be 10 00 00 18 8b 16 00 7d 50 20 16 30
+30 20 36 00 30 be 10 00 00 18 00 00 00 0f 00 81
+0a 32 81 0a 28 14 01 00 30 e4 28 01 00 00 00 fe
+00 4c 50 31 34 31 57 58 33 2d 54 4c 52 31 00 d8
+Extracted contents:
+header: 00 ff ff ff ff ff ff 00
+serial number: 30 ae 31 40 00 00 00 00 00 12
+version: 01 03
+basic params: 80 1e 13 78 ea
+chroma info: b3 85 95 58 53 8a 28 25 50 54
+established: 00 00 00
+standard: 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
+descriptor 1: 26 1b 00 7d 50 20 16 30 30 20 36 00 30 be 10 00 00 18
+descriptor 2: 8b 16 00 7d 50 20 16 30 30 20 36 00 30 be 10 00 00 18
+descriptor 3: 00 00 00 0f 00 81 0a 32 81 0a 28 14 01 00 30 e4 28 01
+descriptor 4: 00 00 00 fe 00 4c 50 31 34 31 57 58 33 2d 54 4c 52 31
+extensions: 00
+checksum: d8
+
+Manufacturer: LEN Model 4031 Serial Number 0
+Made week 0 of 2008
+EDID version: 1.3
+Digital display
+Maximum image size: 30 cm x 19 cm
+Gamma: 220%
+Check DPMS levels
+DPMS levels: Standby Suspend Off
+Supported color formats: RGB 4:4:4, YCrCb 4:2:2
+First detailed timing is preferred timing
+Established timings supported:
+Standard timings supported:
+Detailed timings
+Hex of detail: 261b007d502016303020360030be10000018
+Did detailed timing
+Detailed mode (IN HEX): Clock 69500 KHz, 130 mm x be mm
+ 0500 0530 0550 057d hborder 0
+ 0320 0323 0329 0336 vborder 0
+ -hsync -vsync
+Hex of detail: 8b16007d502016303020360030be10000018
+Detailed mode (IN HEX): Clock 69500 KHz, 130 mm x be mm
+ 0500 0530 0550 057d hborder 0
+ 0320 0323 0329 0336 vborder 0
+ -hsync -vsync
+Hex of detail: 0000000f00810a32810a2814010030e42801
+Manufacturer-specified data, tag 15
+Hex of detail: 000000fe004c503134315758332d544c5231
+ASCII string: LP141WX3-TLR1
+Checksum
+Checksum: 0xd8 (valid)
+WARNING: EDID block does NOT fully conform to EDID 1.3.
+ Missing name descriptor
+ Missing monitor ranges
+bringing up panel at resolution 1280 x 800
+Borders 0 x 0
+Blank 125 x 22
+Sync 32 x 6
+Front porch 48 x 3
+Spread spectrum clock
+Single channel
+Polarities 1, 1
+Data M1=1214600, N1=8388608
+Link frequency 270000 kHz
+Link M1=134955, N1=524288
+Pixel N=10, M1=14, M2=11, P1=1
+Pixel clock 138857 kHz
+waiting for panel powerup
+panel powered up
+@end verbatim
+
+Another compatible T400 screen:
+
+@verbatim
+trisquel@trisquel:~$ sudo i2cdump -y 2 0x50
+No size specified (using byte-data access)
+ 0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef
+00: 00 ff ff ff ff ff ff 00 30 ae 31 40 00 00 00 00 ........0?1@....
+10: 00 12 01 03 80 1e 13 78 ea b3 85 95 58 53 8a 28 .??????x????XS?(
+20: 25 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01 %PT...??????????
+30: 01 01 01 01 01 01 26 1b 00 7d 50 20 16 30 30 20 ??????&?.}P ?00
+40: 36 00 30 be 10 00 00 18 8b 16 00 7d 50 20 16 30 6.0??..???.}P ?0
+50: 30 20 36 00 30 be 10 00 00 18 00 00 00 0f 00 81 0 6.0??..?...?.?
+60: 0a 32 81 0a 28 14 01 00 30 e4 28 01 00 00 00 fe ?2??(??.0?(?...?
+70: 00 4c 50 31 34 31 57 58 33 2d 54 4c 52 31 00 d8 .LP141WX3-TLR1.?
+80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
+90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
+a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
+b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
+c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
+d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
+e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
+f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
+@end verbatim
+
+Copyright © 2015 Francis Rowe <info@@gluglug.org.uk>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/hcl/gm45_remove_me.texi b/docs/src/hcl/gm45_remove_me.texi
new file mode 100644
index 0000000..27c4e6e
--- /dev/null
+++ b/docs/src/hcl/gm45_remove_me.texi
@@ -0,0 +1,437 @@
+\input texinfo
+@documentencoding UTF-8
+
+@macro textstrikeout{text}
+~~\text\~~
+@end macro
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title GM45 chipsets: remove the ME (manageability engine)
+@end titlepage
+
+@node Top
+@top GM45 chipsets: remove the ME (manageability engine)
+
+@menu
+* GM45 chipsets remove the ME manageability engine::
+* ICH9 gen utility::
+* ICH9 deblob utility::
+* demefactory utility::
+@end menu
+
+@node GM45 chipsets remove the ME manageability engine
+@chapter GM45 chipsets: remove the ME (manageability engine)
+@anchor{#gm45-chipsets-remove-the-me-manageability-engine}
+This sections relates to disabling and removing the ME (Intel @strong{M}anagement @strong{E}ngine) on GM45. This was originally done on the ThinkPad X200, and later adapted for the ThinkPad R400/T400/T500. It can in principle be done on any GM45 or GS45 system.
+
+The ME is a blob that typically must be left inside the flash chip (in the ME region, as outlined by the default descriptor). On GM45, it is possible to remove it without any ill effects. All other parts of coreboot on GM45 systems (provided GMA MHD4500 / Intel graphics) can be blob-free, so removing the ME was the last obstacle to make GM45 a feasible target in libreboot (the systems can also work without the microcode blobs).
+
+The ME is removed and disabled in libreboot by modifying the descriptor. More info about this can be found in the ich9deblob/ich9gen source code in resources/utilities/ich9deblob/ in libreboot, or more generally on this page.
+
+More information about the ME can be found at @uref{http://www.coreboot.org/Intel_Management_Engine,http://www.coreboot.org/Intel_Management_Engine} and @uref{http://me.bios.io/Main_Page,http://me.bios.io/Main_Page}.
+
+Another project recently found: @uref{http://io.smashthestack.org/me/,http://io.smashthestack.org/me/}
+
+@uref{index.html,Back to previous index}.
+
+@node ICH9 gen utility
+@chapter ICH9 gen utility
+@anchor{#ich9-gen-utility}
+It is no longer necessary to use @ref{#ich9deblob,ich9deblob} to generate a deblobbed descriptor+gbe image for GM45 targets. ich9gen is a small utility within ich9deblob that can generate them from scratch, without a factory.bin dump.
+
+ich9gen executables can be found under ./ich9deblob/ statically compiled in libreboot_util. If you are using src or git, build ich9gen from source with:@* $ @strong{./build module ich9deblob}@* The executable will appear under resources/utilities/ich9deblob/
+
+Run:@* $ @strong{./ich9gen}
+
+Running ich9gen this way (without any arguments) generates a default descriptor+gbe image with a generic MAC address. You probably don't want to use the generic one; the ROM images in libreboot contain a descriptor+gbe image by default (already inserted) just to prevent or mitigate the risk of bricking your laptop, but with the generic MAC address (the libreboot project does not know what your real MAC address is).
+
+You can find out your MAC address from @strong{ip addr} or @strong{ifconfig} in GNU/Linux. Alternatively, if you are running libreboot already (with the correct MAC address in your ROM), dump it (flashrom -r) and read the first 6 bytes from position 0x1000 (or 0x2000) in a hex editor (or, rename it to factory.rom and run it in ich9deblob: in the newly created mkgbe.c will be the individual bytes of your MAC address). If you are currently running the stock firmware and haven't installed libreboot yet, you can also run that through ich9deblob to get the mac address.
+
+An even simpler way to get the MAC address would be to read what's on the little sticker on the bottom/base of the laptop.
+
+On GM45 laptops that use flash descriptors, the MAC address or the onboard ethernet chipset is flashed (inside the ROM image). You should generate a descriptor+gbe image with your own MAC address inside (with the Gbe checksum updated to match). Run:@* $ @strong{./ich9gen --macaddress XX:XX:XX:XX:XX:XX}@* (replace the XX chars with the hexadecimal chars in the MAC address that you want)
+
+Two new files will be created:
+
+@itemize
+@item
+@strong{ich9fdgbe_4m.bin}: this is for GM45 laptops with the 4MB flash chip.
+@item
+@strong{ich9fdgbe_8m.bin}: this is for GM45 laptops with the 8MB flash chip.
+@end itemize
+
+Two other files will also be created, for the ThinkPad R500 which has a different NIC and, therefore, no GbE region (for this laptop, it is not necessary to change the MAC address in the flash chip, because it's burned into the NIC):
+
+@itemize
+@item
+@strong{ich9fdnogbe_4m.bin}: this is for ThinkPad R500 laptops with the 4MB flash chip, where no GbE region is to be defined.
+@item
+@strong{ich9fdnogbe_8m.bin}: this is for ThinkPad R500 laptops with the 8MB flash chip, where no GbE region is to be defined - @strong{NOTE: No actual R500 laptops with 8MiB are believed to exist. It is believed, that all R500 laptops have 4MiB flash chips}.
+@end itemize
+
+Assuming that your libreboot image is named @strong{libreboot.rom}, copy the file to where @strong{libreboot.rom} is located and then insert the descriptor+gbe file into the ROM image. For 8MiB flash chips:@* $ @strong{dd if=ich9fdgbe_8m.bin of=libreboot.rom bs=1 count=12k conv=notrunc}@* For 4MiB flash chips:@* $ @strong{dd if=ich9fdgbe_4m.bin of=libreboot.rom bs=1 count=12k conv=notrunc}@*
+
+@strong{For the ThinkPad R500, do this instead:}@* For 8MiB flash chips (@strong{highly unlikely on the ThinkPad R500)}:@* $ @strong{dd if=ich9fdnogbe_8m.bin of=libreboot.rom bs=1 count=4k conv=notrunc}@* For 4MiB flash chips (@strong{You probably have this)}:@* $ @strong{dd if=ich9fdnogbe_4m.bin of=libreboot.rom bs=1 count=4k conv=notrunc}@* NOTE: This shouldn't be necessary. Libreboot ROM images already contain a descriptor embedded inside the ROM images for GM45, generated by the ich9gen utility. It's only desirable to re-insert your own when changing the MAC address, which is unnecessary (actually impossible) on the R500, because on that laptop, as already stated, the NIC already has the correct MAC address burned in, along with along configuration data.
+
+Your libreboot.rom image is now ready to be flashed on the system. Refer back to @uref{../install/index.html#flashrom,../install/index.html#flashrom} for how to flash it.
+@menu
+* Write-protecting the flash chip::
+@end menu
+
+@node Write-protecting the flash chip
+@section Write-protecting the flash chip
+@anchor{#write-protecting-the-flash-chip}
+Look in @emph{resources/utilities/ich9deblob/src/descriptor/descriptor.c} for the following lines in the @emph{descriptorHostRegionsUnlocked} function:
+
+@verbatim
+ descriptorStruct.masterAccessSection.flMstr1.fdRegionWriteAccess = 0x1;
+ descriptorStruct.masterAccessSection.flMstr1.biosRegionWriteAccess = 0x1;
+ descriptorStruct.masterAccessSection.flMstr1.meRegionWriteAccess = 0x1;
+ descriptorStruct.masterAccessSection.flMstr1.gbeRegionWriteAccess = 0x1;
+ descriptorStruct.masterAccessSection.flMstr1.pdRegionWriteAccess = 0x1;
+@end verbatim
+
+Also look in @emph{resources/utilities/ich9deblob/src/ich9gen/mkdescriptor.c} for the following lines:
+
+@verbatim
+ descriptorStruct.masterAccessSection.flMstr1.fdRegionWriteAccess = 0x1; /* see ../descriptor/descriptor.c */
+ descriptorStruct.masterAccessSection.flMstr1.biosRegionWriteAccess = 0x1; /* see ../descriptor/descriptor.c */
+ descriptorStruct.masterAccessSection.flMstr1.meRegionWriteAccess = 0x1; /* see ../descriptor/descriptor.c */
+ descriptorStruct.masterAccessSection.flMstr1.gbeRegionWriteAccess = 0x1; /* see ../descriptor/descriptor.c */
+ descriptorStruct.masterAccessSection.flMstr1.pdRegionWriteAccess = 0x1; /* see ../descriptor/descriptor.c */
+@end verbatim
+
+NOTE: When you write-protect the flash chip, re-flashing is no longer possible unless you use dedicated external equipment, which also means disassembling the laptop. The same equipment can also be used to remove the write-protection later on, if you choose to do so. *Only* write-protect the chip if you have the right equipment for external flashing later on; for example, see @uref{../install/bbb_setup.html,../install/bbb_setup.html}.
+
+Change them all to 0x0, then re-compile ich9gen. After you have done that, follow the notes in @ref{#ich9gen,#ich9gen} to generate a new descriptor+gbe image and insert that into your ROM image, then flash it. The next time you boot, the flash chip will be read-only in software (hardware re-flashing will still work, which you will need for re-flashing the chip after write-protecting it, to clear the write protection or to flash yet another ROM image with write protection set in the descriptor).
+
+Flashrom will tell you that you can still forcefully re-flash, using @emph{-p internal:ich_spi_force=yes} but this won't actually work; it'll just brick your laptop.
+
+For external flashing guides, refer to @uref{../install/index.html,../install/index.html}.
+
+@node ICH9 deblob utility
+@chapter ICH9 deblob utility
+@anchor{#ich9-deblob-utility}
+@strong{This is no longer strictly necessary. Libreboot ROM images for GM45 systems now contain the 12KiB descriptor+gbe generated from ich9gen, by default.}
+
+This was the tool originally used to disable the ME on X200 (later adapted for other systems that use the GM45 chipset). @ref{#ich9gen,ich9gen} now supersedes it; ich9gen is better because it does not rely on dumping the factory.rom image (whereas, ich9deblob does).
+
+This is what you will use to generate the deblobbed descriptor+gbe regions for your libreboot ROM image.
+
+If you are working with libreboot_src (or git), you can find the source under resources/utilities/ich9deblob/ and will already be compiled if you ran @strong{./build module all} or @strong{./build module ich9deblob} from the main directory (./), otherwise you can build it like so:@* $ @strong{./build module ich9deblob}@* An executable file named @strong{ich9deblob} will now appear under resources/utilities/ich9deblob/
+
+If you are working with libreboot_util release archive, you can find the utility included, statically compiled (for i686 and x86_64 on GNU/Linux) under ./ich9deblob/.
+
+Place the factory.rom from your system (can be obtained using the external flashing guides for GM45 targets linked @uref{../install/index.html,../install/index.html}) in the directory where you have your ich9deblob executable, then run the tool:@* $ @strong{./ich9deblob}
+
+A 12kiB file named @strong{deblobbed_descriptor.bin} will now appear. @strong{Keep this and the factory.rom stored in a safe location!} The first 4KiB contains the descriptor data region for your system, and the next 8KiB contains the gbe region (config data for your gigabit NIC). These 2 regions could actually be separate files, but they are joined into 1 file in this case.
+
+A 4KiB file named @strong{deblobbed_4kdescriptor.bin} will alternatively appear, if no GbE region was detected inside the ROM image. This is usually the case, when a discrete NIC is used (eg Broadcom) instead of Intel. Only the Intel NICs need a GbE region in the flash chip.
+
+Assuming that your libreboot image is named @strong{libreboot.rom}, copy the @strong{deblobbed_descriptor.bin} file to where @strong{libreboot.rom} is located and then run:@* $ @strong{dd if=deblobbed_descriptor.bin of=libreboot.rom bs=1 count=12k conv=notrunc}
+
+Alternatively, if you got a the @strong{deblobbed_4kdescriptor.bin} file (no GbE defined), do this: $ @strong{dd if=deblobbed_4kdescriptor.bin of=libreboot.rom bs=1 count=4k conv=notrunc}
+
+The utility will also generate 4 additional files:
+
+@itemize
+@item
+mkdescriptor.c
+@item
+mkdescriptor.h
+@item
+mkgbe.c
+@item
+mkgbe.h
+@end itemize
+
+These are C source files that can re-generate the very same Gbe and Descriptor structs (from ich9deblob/ich9gen). To use these, place them in src/ich9gen/ in ich9deblob, then re-build. The newly built @strong{ich9gen} executable will be able to re-create the very same 12KiB file from scratch, based on the C structs, this time @strong{without} the need for a factory.rom dump!
+
+You should now have a @strong{libreboot.rom} image containing the correct 4K descriptor and 8K gbe regions, which will then be safe to flash. Refer back to @uref{../install/index.html#flashrom,../install/index.html#flashrom} for how to flash it.
+
+@node demefactory utility
+@chapter demefactory utility
+@anchor{#demefactory-utility}
+This takes a factory.rom dump and disables the ME/TPM, but leaves the region intact. It also sets all regions read-write.
+
+The ME interferes with flash read/write in flashrom, and the default descriptor locks some regions. The idea is that doing this will remove all of those restrictions.
+
+Simply run (with factory.rom in the same directory):@* $ @strong{./demefactory}
+
+It will generate a 4KiB descriptor file (only the descriptor, no GbE). Insert that into a factory.rom image (NOTE: do this on a copy of it. Keep the original factory.rom stored safely somewhere):@* $ @strong{dd if=demefactory_4kdescriptor.bin of=factory_nome.rom bs=1 count=4k conv=notrunc}
+
+TODO: test this.@* TODO: lenovobios (GM45 thinkpads) still write-protects parts of the flash. Modify the assembly code inside. Note: the factory.rom (BIOS region) from lenovobios is in a compressed format, which you have to extract. bios_extract upstream won't work, but the following was said in #coreboot on freenode IRC:
+
+@verbatim
+<roxfan> fchmmr: try bios_extract with ffv patch http://patchwork.coreboot.org/patch/3444/
+<roxfan> or https://github.com/coreboot/bios_extract/blob/master/phoenix_extract.py
+<roxfan> what are you looking for specifically, btw?
+
+0x74: 0x9fff03e0 PR0: Warning: 0x003e0000-0x01ffffff is read-only.
+0x84: 0x81ff81f8 PR4: Warning: 0x001f8000-0x001fffff is locked.
+@end verbatim
+
+Use-case: a factory.rom image modified in this way would theoretically have no flash protections whatsoever, making it easy to quickly switch between factory/libreboot in software, without ever having to disassemble and re-flash externally unless you brick the device.
+
+demefactory is part of the ich9deblob src, found at @emph{resources/utilities/ich9deblob/}
+
+The sections below are adapted from (mostly) IRC logs related to early development getting the ME removed on GM45. They are useful for background information. This could not have been done without sgsit's help.
+@menu
+* Early notes::
+* Flash chips::
+* Early development notes::
+* GBE gigabit ethernet region in SPI flash::
+* Flash descriptor region::
+* platform data partition in boot flash factoryrom / lenovo bios::
+@end menu
+
+@node Early notes
+@section Early notes
+@anchor{#early-notes}
+@itemize
+@item
+@uref{http://www.intel.co.uk/content/dam/doc/datasheet/io-controller-hub-10-family-datasheet.pdf,http://www.intel.co.uk/content/dam/doc/datasheet/io-controller-hub-10-family-datasheet.pdf} page 230 mentions about descriptor and non-descriptor mode (which wipes out gbe and ME/AMT).
+@item
+@textstrikeout{@strong{See reference to HDA_SDO (disable descriptor security)}} strap connected GPIO33 pin is it on ICH9-M (X200). HDA_SDO applies to later chipsets (series 6 or higher). Disabling descriptor security also disables the ethernet according to sgsit. sgsit's method involves use of 'soft straps' (see IRC logs below) instead of disabling the descriptor.
+@item
+@strong{and the location of GPIO33 on the x200s: (was an external link. Putting it here instead)} @uref{../resources/images/x200/gpio33_location.jpg,../resources/images/x200/gpio33_location.jpg} - it's above the number 7 on TP37 (which is above the big intel chip at the bottom)
+@item
+The ME datasheet may not be for the mobile chipsets but it doesn't vary that much. This one gives some detail and covers QM67 which is what the X201 uses: @uref{http://www.intel.co.uk/content/dam/www/public/us/en/documents/datasheets/6-chipset-c200-chipset-datasheet.pdf,http://www.intel.co.uk/content/dam/www/public/us/en/documents/datasheets/6-chipset-c200-chipset-datasheet.pdf}
+@end itemize
+
+@node Flash chips
+@section Flash chips
+@anchor{#flash-chips}
+@itemize
+@item
+Schematics for X200 laptop: @uref{http://pdf.datasheetarchive.com/indexerfiles/Datasheets-USER/DSAUPLD00006075.pdf,http://pdf.datasheetarchive.com/indexerfiles/Datasheets-USER/DSAUPLD00006075.pdf} @strong{@textstrikeout{- Page 20 and page 9 refer to SDA_HDO or SDA_HDOUT}} only on series 6 or higher chipsets. ICH9-M (X200) does it with a strap connected to GPIO33 pin (see IRC notes below)@* - According to page 29, the X200 can have any of the following flash chips:
+@itemize
+@item
+ATMEL AT26DF321-SU 72.26321.A01 - this is a 32Mb (4MiB) chip
+@item
+MXIC (Macronix?) MX25L3205DM2I-12G 72.25325.A01 - another 32Mb (4MiB) chip
+@item
+MXIC (Macronix?) MX25L6405DMI-12G 41R0820AA - this is a 64Mb (8MiB) chip
+@item
+Winbond W25X64VSFIG 41R0820BA - another 64Mb (8MiB) chip
+@end itemize
+
+sgsit says that the X200s with the 64Mb flash chips are (probably) the ones with AMT (alongside the ME), whereas the 32Mb chips contain only the ME.
+@item
+Schematics for X200s laptop: @uref{http://pdf.datasheetarchive.com/indexerfiles/Datasheets-USER/DSAUPLD00006104.pdf,http://pdf.datasheetarchive.com/indexerfiles/Datasheets-USER/DSAUPLD00006104.pdf}.
+@end itemize
+
+@node Early development notes
+@section Early development notes
+@anchor{#early-development-notes}
+
+@verbatim
+
+Start (hex) End (hex) Length (hex) Area Name
+----------- --------- ------------ ---------
+00000000 003FFFFF 00400000 Flash Image
+
+00000000 00000FFF 00001000 Descriptor Region
+00000004 0000000F 0000000C Descriptor Map
+00000010 0000001B 0000000C Component Section
+00000040 0000004F 00000010 Region Section
+00000060 0000006B 0000000C Master Access Section
+00000060 00000063 00000004 CPU/BIOS
+00000064 00000067 00000004 Manageability Engine (ME)
+00000068 0000006B 00000004 GbE LAN
+00000100 00000103 00000004 ICH Strap 0
+00000104 00000107 00000004 ICH Strap 1
+00000200 00000203 00000004 MCH Strap 0
+00000EFC 00000EFF 00000004 Descriptor Map 2
+00000ED0 00000EF7 00000028 ME VSCC Table
+00000ED0 00000ED7 00000008 Flash device 1
+00000ED8 00000EDF 00000008 Flash device 2
+00000EE0 00000EE7 00000008 Flash device 3
+00000EE8 00000EEF 00000008 Flash device 4
+00000EF0 00000EF7 00000008 Flash device 5
+00000F00 00000FFF 00000100 OEM Section
+00001000 001F5FFF 001F5000 ME Region
+001F6000 001F7FFF 00002000 GbE Region
+001F8000 001FFFFF 00008000 PDR Region
+00200000 003FFFFF 00200000 BIOS Region
+
+Start (hex) End (hex) Length (hex) Area Name
+----------- --------- ------------ ---------
+00000000 003FFFFF 00400000 Flash Image
+
+00000000 00000FFF 00001000 Descriptor Region
+00000004 0000000F 0000000C Descriptor Map
+00000010 0000001B 0000000C Component Section
+00000040 0000004F 00000010 Region Section
+00000060 0000006B 0000000C Master Access Section
+00000060 00000063 00000004 CPU/BIOS
+00000064 00000067 00000004 Manageability Engine (ME)
+00000068 0000006B 00000004 GbE LAN
+00000100 00000103 00000004 ICH Strap 0
+00000104 00000107 00000004 ICH Strap 1
+00000200 00000203 00000004 MCH Strap 0
+00000ED0 00000EF7 00000028 ME VSCC Table
+00000ED0 00000ED7 00000008 Flash device 1
+00000ED8 00000EDF 00000008 Flash device 2
+00000EE0 00000EE7 00000008 Flash device 3
+00000EE8 00000EEF 00000008 Flash device 4
+00000EF0 00000EF7 00000008 Flash device 5
+00000EFC 00000EFF 00000004 Descriptor Map 2
+00000F00 00000FFF 00000100 OEM Section
+00001000 00002FFF 00002000 GbE Region
+00003000 00202FFF 00200000 BIOS Region
+
+Build Settings
+--------------
+Flash Erase Size = 0x1000
+
+@end verbatim
+
+It's a utility called 'Flash Image Tool' for ME 4.x that was used for this. You drag a complete image into in and the utility decomposes the various components, allowing you to set soft straps.
+
+This tool is proprietary, for Windows only, but was used to deblob the X200. End justified means, and the utility is no longer needed since the ich9deblob utility (documented on this page) can now be used to create deblobbed descriptors.
+
+@node GBE gigabit ethernet region in SPI flash
+@section GBE (gigabit ethernet) region in SPI flash
+@anchor{#gbe-gigabit-ethernet-region-in-spi-flash}
+Of the 8K, about 95% is 0xFF. The data is the gbe region is fully documented in this public datasheet: @uref{http://www.intel.co.uk/content/dam/doc/application-note/i-o-controller-hub-9m-82567lf-lm-v-nvm-map-appl-note.pdf,http://www.intel.co.uk/content/dam/doc/application-note/i-o-controller-hub-9m-82567lf-lm-v-nvm-map-appl-note.pdf}
+
+The only actual content found was:
+
+@verbatim
+
+00 1F 1F 1F 1F 1F 00 08 FF FF 83 10 FF FF FF FF
+08 10 FF FF C3 10 EE 20 AA 17 F5 10 86 80 00 00
+01 0D 00 00 00 00 05 06 20 30 00 0A 00 00 8B 8D
+02 06 40 2B 43 00 00 00 F5 10 AD BA F5 10 BF 10
+AD BA CB 10 AD BA AD BA 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 01 00 40 28 12 07 40 FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF D9 F0
+20 60 1F 00 02 00 13 00 00 80 1D 00 FF 00 16 00
+DD CC 18 00 11 20 17 00 DD DD 18 00 12 20 17 00
+00 80 1D 00 00 00 1F
+@end verbatim
+
+The first part is the MAC address set to all 0x1F. It's repeated haly way through the 8K area, and the rest is all 0xFF. This is all documented in the datasheet.
+
+The GBe region starts at 0x20A000 bytes from the *end* of a factory image and is 0x2000 bytes long. In libreboot (deblobbed) the descriptor is set to put gbe directly after the initial 4K flash descriptor. So the first 4K of the ROM is the descriptor, and then the next 8K is the gbe region.
+@menu
+* GBE region change MAC address::
+@end menu
+
+@node GBE region change MAC address
+@subsection GBE region: change MAC address
+@anchor{#gbe-region-change-mac-address}
+According to the datasheet, it's supposed to add up to 0xBABA but can actually be others on the X200. @uref{https://communities.intel.com/community/wired/blog/2010/10/14/how-to-basic-eeprom-checksums,https://communities.intel.com/community/wired/blog/2010/10/14/how-to-basic-eeprom-checksums}
+
+@emph{"One of those engineers loves classic rock music, so they selected 0xBABA"}
+
+In honour of the song @emph{Baba O'Reilly} by @emph{The Who} apparently. We're not making this stuff up...
+
+0x3ABA, 0x34BA, 0x40BA and more have been observed in the main Gbe regions on the X200 factory.rom dumps. The checksums of the backup regions match BABA, however.
+
+By default, the X200 (as shipped by Lenovo) actually has an invalid main gbe checksum. The backup gbe region is correct, and is what these systems default to. Basically, you should do what you need on the *backup* gbe region, and then correct the main one by copying from the backup.
+
+Look at resources/utilities/ich9deblob/ich9deblob.c.
+
+@itemize
+@item
+Add the first 0x3F 16bit numbers (unsigned) of the GBe descriptor together (this includes the checksum value) and that has to add up to 0xBABA. In other words, the checksum is 0xBABA minus the total of the first 0x3E 16bit numbers (unsigned), ignoring any overflow.
+@end itemize
+
+@node Flash descriptor region
+@section Flash descriptor region
+@anchor{#flash-descriptor-region}
+@uref{http://www.intel.co.uk/content/dam/doc/datasheet/io-controller-hub-9-datasheet.pdf,http://www.intel.co.uk/content/dam/doc/datasheet/io-controller-hub-9-datasheet.pdf} from page 850 onwards. This explains everything that is in the flash descriptor, which can be used to understand what libreboot is doing about modifying it.
+
+How to deblob:
+
+@itemize
+@item
+patch the number of regions present in the descriptor from 5 - 3
+@item
+originally descriptor + bios + me + gbe + platform
+@item
+modified = descriptor + bios + gbe
+@item
+the next stage is to patch the part of the descriptor which defines the start and end point of each section
+@item
+then cut out the gbe region and insert it just after the region
+@item
+all this can be substantiated with public docs (ICH9 datasheet)
+@item
+the final part is flipping 2 bits. Halting the ME via 1 MCH soft strap and 1 ICH soft strap
+@item
+the part of the descriptor described there gives the base address and length of each region (bits 12:24 of each address)
+@item
+to disable a region, you set the base address to 0xFFF and the length to 0
+@item
+and you change the number of regions from 4 (zero based) to 2
+@end itemize
+
+There's an interesting parameter called 'ME Alternate disable', which allows the ME to only handle hardware errata in the southbridge, but disables any other functionality. This is similar to the 'ignition' in the 5 series and higher but using the standard firmware instead of a small 128K version. Useless for libreboot, though.
+
+To deblob GM45, you chop out the platform and ME regions and correct the addresses in flReg1-4. Then you set meDisable to 1 in ICHSTRAP0 and MCHSTRAP0.
+
+How to patch the descriptor from the factory.rom dump
+
+@itemize
+@item
+map the first 4k into the struct (minus the gbe region)
+@item
+set NR in FLMAP0 to 2 (from 4)
+@item
+adjust BASE and LIMIT in flReg1,2,3,4 to reflect the new location of each region (or remove them in the case of Platform and ME)
+@item
+set meDisable to 1/true in ICHSTRAP0 and MCHSTRAP0
+@item
+extract the 8k GBe region and append that to the end of the 4k descriptor
+@item
+output the 12k concatenated chunk
+@item
+Then it can be dd'd into the first 12K part of a coreboot image.
+@item
+the GBe region always starts 0x20A000 bytes from the end of the ROM
+@end itemize
+
+This means that libreboot's descriptor region will simply define the following regions:
+
+@itemize
+@item
+descriptor (4K)
+@item
+gbe (8K)
+@item
+bios (rest of flash chip. CBFS also set to occupy this whole size)
+@end itemize
+
+The data in the descriptor region is little endian, and it represents bits 24:12 of the address (bits 12-24, written this way since bit 24 is nearer to left than bit 12 in the binary representation).
+
+So, @emph{x << 12 = address}
+
+If it's in descriptor mode, then the first 4 bytes will be 5A A5 F0 0F.
+
+@node platform data partition in boot flash factoryrom / lenovo bios
+@section platform data partition in boot flash (factory.rom / lenovo bios)
+@anchor{#platform-data-partition-in-boot-flash-factory.rom-lenovo-bios}
+Basically useless for libreboot, since it appears to be a blob. Removing it didn't cause any issues in libreboot.
+
+This is a 32K region from the factory image. It could be data (non-functional) that the original Lenovo BIOS used, but we don't know.
+
+It has only a 448 byte fragment different from 0x00 or 0xFF.
+
+Copyright © 2014, 2015 Francis Rowe <info@@gluglug.org.uk>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/hcl/index.texi b/docs/src/hcl/index.texi
new file mode 100644
index 0000000..b8558f8
--- /dev/null
+++ b/docs/src/hcl/index.texi
@@ -0,0 +1,543 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title Hardware compatibility list
+@end titlepage
+
+@node Top
+@top Hardware compatibility list
+
+@menu
+* Hardware compatibility list::
+@end menu
+
+@node Hardware compatibility list
+@chapter Hardware compatibility list
+@anchor{#hardware-compatibility-list}
+This sections relates to known hardware compatibility in libreboot.
+
+@itemize
+@item
+@ref{#supported_list,List of supported hardware}
+@itemize
+@item
+@ref{#supported_workstations_x86amd,Servers/workstations}
+@item
+@ref{#supported_laptops_arm,Laptops (ARM)}
+@item
+@ref{#supported_laptops_x86intel,Laptops (Intel, x86)}
+@end itemize
+
+@item
+@ref{#recommended_wifi,Recommended wifi chipsets}
+@end itemize
+
+@uref{../index.html,Back to previous index}.
+@menu
+* List of supported hardware::
+* Recommended wifi chipsets::
+* List of supported ThinkPad X60s::
+* List of supported ThinkPad X60 Tablets::
+* Supported T60 list::
+* ThinkPad T60 ATI GPU and ThinkPad T60 Intel GPU differences::
+* Information about the macbook11::
+* Information about the macbook21::
+@end menu
+
+@node List of supported hardware
+@section List of supported hardware
+@anchor{#list-of-supported-hardware}
+Libreboot supports the following systems in this release:
+@menu
+* Servers/workstations AMD x86::
+* Laptops ARM::
+* Laptops Intel x86::
+@end menu
+
+@node Servers/workstations AMD x86
+@subsection Servers/workstations (AMD, x86)
+@anchor{#serversworkstations-amd-x86}
+@itemize
+@item
+@uref{kfsn4-dre.html,ASUS KFSN4-DRE motherboard}
+@item
+@uref{kgpe-d16.html,ASUS KGPE-D16 motherboard}
+@end itemize
+
+@node Laptops ARM
+@subsection Laptops (ARM)
+@anchor{#laptops-arm}
+@itemize
+@item
+@uref{c201.html,ASUS Chromebook C201}
+@end itemize
+
+@node Laptops Intel x86
+@subsection Laptops (Intel, x86)
+@anchor{#laptops-intel-x86}
+@itemize
+@item
+@ref{#supported_x60_list,Lenovo ThinkPad X60/X60s}
+@item
+@ref{#supported_x60t_list,Lenovo ThinkPad X60 Tablet}
+@item
+@ref{#supported_t60_list,Lenovo ThinkPad T60} (there are exceptions. see link)
+@item
+@uref{x200.html,Lenovo ThinkPad X200}
+@item
+@uref{r400.html,Lenovo ThinkPad R400}
+@item
+@uref{r500.html,Lenovo ThinkPad R500}
+@item
+@uref{t400.html,Lenovo ThinkPad T400}
+@item
+@uref{t500.html,Lenovo ThinkPad T500}
+@item
+@ref{#macbook11,Apple MacBook1,1}
+@item
+@ref{#macbook21,Apple MacBook2,1}
+@end itemize
+
+'Supported' means that the build scripts know how to build ROM images for these systems, and that the systems have been tested (confirmed working). There may be exceptions; in other words, this is a list of 'officially' supported systems.
+
+It is also possible to build ROM images (from source) for other systems (and virtual systems, e.g. QEMU).
+
+@ref{#pagetop,Back to top of page}
+
+@node Recommended wifi chipsets
+@section Recommended wifi chipsets
+@anchor{#recommended-wifi-chipsets}
+The following are known to work well:
+
+@itemize
+@item
+@uref{http://h-node.org/search/results/en/1/search/wifi/ar9285,Atheros AR5B95} (chipset: Atheros AR9285); mini PCI-E. Most of these are half-height, so you will need a half>full height mini PCI express adapter/bracket.
+@item
+@uref{http://h-node.org/wifi/view/en/116/Atheros-Communications-Inc--AR928X-Wireless-Network-Adapter--PCI-Express---rev-01-,Atheros AR928X} chipset; mini PCI-E. Most of these are half-height, so you will need a half>full height mini PCI express adapter/bracket
+@item
+Unex DNUA-93F (chipset: @uref{http://h-node.org/search/results/en/1/search/wifi/ar9271,Atheros AR9271}); USB.
+@item
+Any of the chipsets listed at @uref{https://www.fsf.org/resources/hw/endorsement/respects-your-freedom,https://www.fsf.org/resources/hw/endorsement/respects-your-freedom}
+@item
+Any of the chipsets listed at @uref{http://h-node.org/wifi/catalogue/en/1/1/undef/undef/yes?,http://h-node.org/wifi/catalogue/en/1/1/undef/undef/yes?}
+@end itemize
+
+The following was mentioned (on IRC), but it's unknown to the libreboot project if these work with linux-libre kernel (TODO: test):
+
+@itemize
+@item
+ar5bhb116 ar9382 ABGN
+@item
+[0200]: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c]
+@end itemize
+
+@ref{#pagetop,Back to top of page}
+
+@node List of supported ThinkPad X60s
+@section List of supported ThinkPad X60s
+@anchor{#list-of-supported-thinkpad-x60s}
+Native gpu initialization ('native graphics') which replaces the proprietary VGA Option ROM ('@uref{https://en.wikipedia.org/wiki/Video_BIOS,Video BIOS}' or 'VBIOS'), all known LCD panels are currently compatible:
+
+To find what LCD panel you have, see: @uref{../misc/index.html#get_edid_panelname,../misc/index.html#get_edid_panelname}.
+
+@itemize
+@item
+TMD-Toshiba LTD121ECHB: #
+@item
+CMO N121X5-L06: #
+@item
+Samsung LTN121XJ-L07: #
+@item
+BOE-Hydis HT121X01-101: #
+@end itemize
+
+You can remove an X61/X61s motherboard from the chassis and install an X60/X60s motherboard in it's place (for flashing libreboot). The chassis is mostly identical and the motherboards are the same shape/size.
+
+The X60 typically comes with an Intel wifi chipset which does not work at all without proprietary firmware, and while Lenovo BIOS is running the system will refuse to boot if you replace the card. Fortunately it is very easily replaced; just remove the card and install another one @strong{after} libreboot is installed. See @ref{#recommended_wifi,#recommended_wifi} for replacements.
+
+@ref{#pagetop,Back to top of page.}
+
+@node List of supported ThinkPad X60 Tablets
+@section List of supported ThinkPad X60 Tablets
+@anchor{#list-of-supported-thinkpad-x60-tablets}
+Native gpu initialization ('native graphics') which replaces the proprietary VGA Option ROM ('@uref{https://en.wikipedia.org/wiki/Video_BIOS,Video BIOS}' or 'VBIOS').
+
+To find what LCD panel you have, see: @uref{../misc/index.html#get_edid_panelname,../misc/index.html#get_edid_panelname}.
+
+There are 5 known LCD panels for the X60 Tablet:
+
+@itemize
+@item
+@strong{X60T XGA (1024x768):}
+@itemize
+@item
+BOE-Hydis HV121X03-100 (works)
+@item
+Samsung LTN121XP01 (does not work. blank screen)
+@item
+BOE-Hydis HT12X21-351 (does not work. blank screen)
+@end itemize
+
+@item
+@strong{X60T SXGA+ (1400x1050):}
+@itemize
+@item
+BOE-Hydis HV121P01-100 (works)
+@item
+BOE-Hydis HV121P01-101 (works)
+@end itemize
+
+@end itemize
+
+Most X60Ts only have digitizer (pen), but some have finger (touch) aswell as pen; finger/multitouch doesn't work, only digitizer (pen) does.
+
+You can remove an X61/X61s motherboard from the chassis and install an X60/X60s motherboard in its place (for flashing libreboot). The chassis is mostly identical and the motherboards are the same shape/size. @strong{It is unknown if the same applies between the X60 Tablet and the X61 Tablet}.
+
+The X60 Tablet typically comes with an Intel wifi chipset which does not work at all without proprietary firmware, and while Lenovo BIOS is running the system will refuse to boot if you replace the card. Fortunately it is very easily replaced; just remove the card and install another one @strong{after} libreboot is installed. See @ref{#recommended_wifi,#recommended_wifi} for replacements.
+
+A user with a X60T that has digitizer+finger support, reported that they could get finger input working. They used linuxwacom at git tag 0.25.99.2 and had the following in their xorg.conf:
+
+@verbatim
+# Now, for some reason (probably a bug in linuxwacom),
+# the 'Touch=on' directive gets reset to 'off'.
+# So you'll need to do
+# $ xsetwacom --set WTouch Touch on
+#
+# tested with linuxwacom git 42a42b2a8636abc9e105559e5dea467163499de7
+
+Section "Monitor"
+ Identifier "<default monitor>"
+ DisplaySize 245 184
+EndSection
+
+Section "Screen"
+ Identifier "Default Screen Section"
+ Monitor "<default monitor<"
+EndSection
+
+Section "InputDevice"
+ Identifier "WTouch"
+ Driver "wacom"
+ Option "Device" "/dev/ttyS0"
+# Option "DebugLevel" "12"
+ Option "BaudRate" "38400"
+ Option "Type" "touch"
+ Option "Touch" "on"
+ Option "Gesture" "on"
+ Option "ForceDevice" "ISDV4"
+# Option "KeepShape" "on"
+ Option "Mode" "Absolute"
+ Option "RawSample" "2"
+# Option "TPCButton" "off"
+ Option "TopX" "17"
+ Option "TopY" "53"
+ Option "BottomX" "961"
+ Option "BottomY" "985"
+EndSection
+
+Section "ServerLayout"
+ Identifier "Default Layout"
+ Screen "Default Screen Section"
+ InputDevice "WTouch" "SendCoreEvents"
+EndSection
+@end verbatim
+
+@ref{#pagetop,Back to top of page.}
+
+@node Supported T60 list
+@section Supported T60 list
+@anchor{#supported-t60-list}
+Native gpu initialization ('native graphics') which replaces the proprietary VGA Option ROM ('@uref{https://en.wikipedia.org/wiki/Video_BIOS,Video BIOS}' or 'VBIOS').
+
+To find what LCD panel you have, see: @uref{../misc/index.html#get_edid_panelname,../misc/index.html#get_edid_panelname}.
+
+@strong{Some T60s have ATI GPUs, and all T60P laptops have ATI GPUs These are incompatible! See @ref{#t60_ati_intel,#t60_ati_intel} for how to remedy this.}
+
+How to dump the EDID:@*
+
+Tested LCD panels: @strong{working(compatible)}
+
+@itemize
+@item
+TMD-Toshiba LTD141EN9B (14.1" 1400x1050) (FRU P/N 41W1478 recommended for the inverter board)
+@item
+Samsung LTN141P4-L02 (14.1" 1400x1050) (FRU P/N 41W1478 recommended for the inverter board)
+@item
+LG-Philips LP150E05-A2K1 (15.1" 1400x1050) (P/N 42T0078 FRU 42T0079 or P/N 41W1338 recommended for the inverter board)
+@item
+Samsung LTN150P4-L01 (15.1" 1400x1050) (P/N 42T0078 FRU 42T0079 or P/N 41W1338 recommended for the inverter board) (not a T60 screen afaik, but it works)
+@item
+BOE-Hydis HV150UX1-100 (15.1" 1600x1200) (P/N 42T0078 FRU 42T0079 or P/N 41W1338 recommended for the inverter board)
+@end itemize
+
+Tested LCD panels: @strong{not working yet (incompatible; see @uref{../future/index.html#lcd_i945_incompatibility,../future/index.html#lcd_i945_incompatibility})}
+
+@itemize
+@item
+Samsung LTN141XA-L01 (14.1" 1024x768)
+@item
+LG-Philips LP150X09 (15.1" 1024x768)
+@item
+Samsung LTN150XG (15.1" 1024x768)
+@item
+LG-Philips LP150E06-A5K4 (15.1" 1400x1050) (also, not an official T60 screen)
+@item
+Samsung LTN154X3-L0A (15.4" 1280x800)
+@item
+IDtech IAQX10N (15.1" 2048x1536) (no display in GRUB, display in GNU/Linux is temperamental) (P/N 42T0078 FRU 42T0079 or P/N 41W1338 recommended for the inverter board)
+@item
+IDtech N150U3-L01 (15.1" 1600x1200) (no display in GRUB, display in GNU/Linux works) (P/N 42T0078 FRU 42T0079 or P/N 41W1338 recommended for the inverter board)
+@end itemize
+
+@emph{The following LCD panels are @strong{UNTESTED}. If you have one of these panels then please submit a report!}:
+
+@itemize
+@item
+CMO(IDtech?) N141XC (14.1" 1024x768)
+@item
+BOE-Hydis HT14X14 (14.1" 1024x768)
+@item
+TMD-Toshiba LTD141ECMB (14.1" 1024x768)
+@item
+Boe-Hydis HT14P12 (14.1" 1400x1050) (FRU P/N 41W1478 recommended for the inverter board)
+@item
+CMO (IDtech?) 13N7068 (15.1" 1024x768)
+@item
+CMO (IDtech?) 13N7069 (15.1" 1024x768)
+@item
+BOE-Hydis HV150P01-100 (15.1" 1400x1050) (P/N 42T0078 FRU 42T0079 or P/N 41W1338 recommended for the inverter board)
+@item
+BOE-Hydis HV150UX1-102 (15.1" 1600x1200) (P/N 42T0078 FRU 42T0079 or P/N 41W1338 recommended for the inverter board)
+@item
+IDtech IAQX10S (15.1" 2048x1536) (P/N 42T0078 FRU 42T0079 or P/N 41W1338 recommended for the inverter board)
+@item
+Samsung LTN154P2-L05 (42X4641 42T0329) (15.4" 1680x1050)
+@item
+LG-Philips LP154W02-TL10 (13N7020 42T0423) (15.4" 1680x1050)
+@item
+LG-Philips LP154WU1-TLB1 (42T0361) (15.4" 1920x1200) @strong{(for T61p but it might work in T60. Unknown!)}
+@item
+Samsung LTN154U2-L05 (42T0408 42T0574) (15.4" 1920x1200) @strong{(for T61p but it might work in T60. Unknown!)}
+@end itemize
+
+It is unknown whether the 1680x1050 (15.4") and 1920x1200 (15.4") panels use a different inverter board than the 1280x800 panels.
+
+The T60 typically comes with an Intel wifi chipset which does not work at all without proprietary firmware, and while Lenovo BIOS is running the system will refuse to boot if you replace the card. Fortunately it is very easily replaced; just remove the card and install another one @strong{after} libreboot is installed. See @ref{#recommended_wifi,#recommended_wifi} for replacements.
+
+@ref{#pagetop,Back to top of page.}
+
+@node ThinkPad T60 ATI GPU and ThinkPad T60 Intel GPU differences
+@section ThinkPad T60 (ATI GPU) and ThinkPad T60 (Intel GPU) differences.
+@anchor{#thinkpad-t60-ati-gpu-and-thinkpad-t60-intel-gpu-differences.}
+If your T60 is a 14.1" or 15.1" model with an ATI GPU, it won't work with libreboot by default but you can replace the motherboard with another T60 motherboard that has an Intel GPU, and then libreboot should work.
+
+As far as I know, 14.1" (Intel GPU) and 15.1" (Intel GPU) T60 motherboards are the same, where 'spacers' are used on the 15.1" T60. In any case, it makes sense to find one that is guaranteed to fit in your chassis.
+
+There is also a 15.4" T60 with Intel GPU.
+
+Note: the T60@strong{p} laptops all have ATI graphics. The T60p laptops cannot be used with libreboot under any circumstances.
+
+The following T60 motherboard (see area highlighted in white) shows an empty space where the ATI GPU would be (this particular motherboard has an Intel GPU):@*@* @image{../resources/images/t60_dev/t60_unbrick,,,,jpg}
+
+The reason that the ATI GPU on T60 is unsupported is due to the VBIOS (Video BIOS) which is non-free. The VBIOS for the Intel GPU on X60/T60 has been reverse engineered, and replaced with Free Software and so will work in libreboot.
+
+The 'Video BIOS' is what initializes graphics.
+
+See: @uref{https://en.wikipedia.org/wiki/Video_BIOS,https://en.wikipedia.org/wiki/Video_BIOS}.@* In fact, lack of free VBIOS in general is a big problem in coreboot, and is one reason (among others) why many ports for coreboot are unsuitable for libreboot's purpose.
+
+Theoretically, the ThinkPad T60 with ATI GPU can work with libreboot and have ROM images compiled for it, however in practise it would not be usable as a laptop because there would be no visual display at all. That being said, such a configuration is acceptable for use in a 'headless' server setup (with serial and/or ssh console as the display).
+
+@ref{#pagetop,Back to top of page.}
+
+@node Information about the macbook11
+@section Information about the macbook1,1
+@anchor{#information-about-the-macbook11}
+There is an Apple laptop called the macbook1,1 from 2006 which uses the same i945 chipset as the ThinkPad X60/T60. A developer ported the @ref{#macbook21,MacBook2,1} to coreboot, the ROM images also work on the macbook1,1.
+
+You can refer to @ref{#macbook21,#macbook21} for most of this. Macbook2,1 laptops come with Core 2 Duo processors which support 64-bit operating systems (and 32-bit). The MacBook1,1 uses Core Duo processors (supports 32-bit OS but not 64-bit), and it is believed that this is the only difference.
+
+It is believed that all models are compatible, listed here:
+
+@itemize
+@item
+@uref{http://www.everymac.com/ultimate-mac-lookup/?search_keywords=MacBook1,1,http://www.everymac.com/ultimate-mac-lookup/?search_keywords=MacBook1,1}
+@end itemize
+
+@menu
+* Compatible models::
+@end menu
+
+@node Compatible models
+@subsection Compatible models
+@anchor{#compatible-models}
+Specifically (Order No. / Model No. / CPU):
+
+@itemize
+@item
+MA255LL/A / A1181 (EMC 2092) / Core Duo T2500 @strong{(tested - working)}
+@item
+MA254LL/A / A1181 (EMC 2092) / Core Duo T2400 (untested)
+@item
+MA472LL/A / A1181 (EMC 2092) / Core Duo T2500 (untested)
+@end itemize
+
+Also of interest: @uref{../git/index.html#config_macbook21,../git/index.html#config_macbook21}.
+
+Unbricking: @uref{https://www.ifixit.com/Device/MacBook_Core_2_Duo,this page shows disassembly guides} and mono's page (see @ref{#macbook21,#macbook21}) shows the location of the SPI flash chip on the motherboard. @uref{https://www.ifixit.com/Guide/MacBook+Core+2+Duo+PRAM+Battery+Replacement/529,How to remove the motherboard}.
+
+No method is yet known for flashing in GNU/Linux while the Apple firmware is running. You will need to disassemble the system and flash externally. Reading from flash seems to work. For external flashing, refer to @uref{../install/bbb_setup.html,../install/bbb_setup.html}.
+
+@ref{#pagetop,Back to top of page.}
+
+@node Information about the macbook21
+@section Information about the macbook2,1
+@anchor{#information-about-the-macbook21}
+There is an Apple laptop called the macbook2,1 from late 2006 or early 2007 that uses the same i945 chipset as the ThinkPad X60 and ThinkPad T60. A developer ported coreboot to their macbook2,1, and now libreboot can run on it.
+
+Mono Moosbart is the person who wrote the port for macbook2,1. Referenced below are copies (up to date at the time of writing, 20140630) of the pages that this person wrote when porting coreboot to the macbook2,1. They are included here in case the main site goes down for whatever reason, since they include a lot of useful information.
+
+Backups created using wget:@* @strong{$ wget -m -p -E -k -K -np http://macbook.donderklumpen.de/}@* @strong{$ wget -m -p -E -k -K -np http://macbook.donderklumpen.de/coreboot/}@* Use @strong{-e robots=off} if using this trick for other sites and the site restricts using robots.txt
+
+@strong{Links to wget backups (and the backups themselves) of Mono's pages (see above) removed temporarily. Mono has given me permission to distribute them, but I need to ask this person to tell me what license these works fall under first. Otherwise, the above URLs should be fine. NOTE TO SELF: REMOVE THIS WHEN DONE}
+@menu
+* Installing GNU/Linux distributions on Apple EFI firmware::
+* Information about coreboot::
+* coreboot wiki page::
+* Compatible models::
+@end menu
+
+@node Installing GNU/Linux distributions on Apple EFI firmware
+@subsection Installing GNU/Linux distributions (on Apple EFI firmware)
+@anchor{#installing-gnulinux-distributions-on-apple-efi-firmware}
+@itemize
+@item
+@ref{#,Parabola GNU/Linux installation on a macbook2,1 with Apple EFI firmware} (this is a copy of Mono's page, see above)
+@end itemize
+
+How to boot an ISO: burn it to a CD (like you would normally) and hold down the Alt/Control key while booting. The bootloader will detect the GNU/Linux CD as 'Windows' (because Apple doesn't think GNU/Linux exists). Install it like you normally would. When you boot up again, hold Alt/Control once more. The installation (on the HDD) will once again be seen as 'Windows'. (it's not actually Windows, but Apple likes to think that Apple and Microsoft are all that exist.) Now to install libreboot, follow @uref{../install/index.html#flashrom_macbook21,../install/index.html#flashrom_macbook21}.
+
+@node Information about coreboot
+@subsection Information about coreboot
+@anchor{#information-about-coreboot}
+@itemize
+@item
+@ref{#,Coreboot on the macbook2,1} (this is a copy of Mono's page, see above)
+@end itemize
+
+@node coreboot wiki page
+@subsection coreboot wiki page
+@anchor{#coreboot-wiki-page}
+@itemize
+@item
+@uref{http://www.coreboot.org/Board:apple/macbook21,http://www.coreboot.org/Board:apple/macbook21}
+@end itemize
+
+@node Compatible models
+@subsection Compatible models
+@anchor{#compatible-models-1}
+It is believed that all models are compatible, listed here:
+
+@itemize
+@item
+@uref{http://www.everymac.com/ultimate-mac-lookup/?search_keywords=MacBook2,1,http://www.everymac.com/ultimate-mac-lookup/?search_keywords=MacBook2,1}
+@end itemize
+
+Specifically (Order No. / Model No. / CPU):
+
+@itemize
+@item
+MA699LL/A / A1181 (EMC 2121) / Intel Core 2 Duo T5600 @strong{(tested - working)}
+@item
+MA701LL/A / A1181 (EMC 2121) / Intel Core 2 Duo T7200 @strong{(tested - working)}
+@item
+MB061LL/A / A1181 (EMC 2139) / Intel Core 2 Duo T7200 (untested)
+@item
+MA700LL/A / A1181 (EMC 2121) / Intel Core 2 Duo T7200 @strong{(tested - working)}
+@item
+MB063LL/A / A1181 (EMC 2139) / Intel Core 2 Duo T7400 (untested)
+@item
+MB062LL/A / A1181 (EMC 2139) / Intel Core 2 Duo T7400 @strong{(tested - working)}
+@end itemize
+
+Also of interest: @uref{../git/index.html#config_macbook21,../git/index.html#config_macbook21}.
+
+Unbricking: @uref{https://www.ifixit.com/Device/MacBook_Core_2_Duo,this page shows disassembly guides} and mono's page (see above) shows the location of the SPI flash chip on the motherboard. @uref{https://www.ifixit.com/Guide/MacBook+Core+2+Duo+PRAM+Battery+Replacement/529,How to remove the motherboard}.
+
+For external flashing, refer to @uref{../install/bbb_setup.html,../install/bbb_setup.html}.
+
+You need to replace OS X with GNU/Linux before flashing libreboot. (OSX won't run at all in libreboot).
+
+There are some issues with this system (compared to other computers that libreboot supports):
+
+This is an apple laptop, so it comes with OS X: it has an Apple keyboard, which means that certain keys are missing: insert, del, home, end, pgup, pgdown. There is also one mouse button only. Battery life is poor compared to X60/T60 (for now). It also has other issues: for example, the Apple logo on the back is a hole, exposing the backlight, which means that it glows. You should cover it up.
+
+The system does get a bit hotter compared to when running the original firmware. It is certainly hotter than an X60/T60. The heat issues have been partially fixed by the following patch (now merged in libreboot): @uref{http://review.coreboot.org/#/c/7923/,http://review.coreboot.org/#/c/7923/}.
+
+@strong{The MacBook2,1 comes with a webcam, which does not work without proprietary software. Also, webcams are a security risk; cover it up! Or remove it.}
+
+A user reported that they could get better response from the touchpad with the following in their xorg.conf:
+
+@verbatim
+Section "InputClass"
+ Identifier "Synaptics Touchpad"
+ Driver "synaptics"
+ MatchIsTouchpad "on"
+ MatchDevicePath "/dev/input/event*"
+ Driver "synaptics"
+# The next two values determine how much pressure one needs
+# for tapping, moving the cursor and other events.
+ Option "FingerLow" "10"
+ Option "FingerHigh" "15"
+# Do not emulate mouse buttons in the touchpad corners.
+ Option "RTCornerButton" "0"
+ Option "RBCornerButton" "0"
+ Option "LTCornerButton" "0"
+ Option "LBCornerButton" "0"
+# One finger tap = left-click
+ Option "TapButton1" "1"
+# Two fingers tap = right-click
+ Option "TapButton2" "3"
+# Three fingers tap = middle-mouse
+ Option "TapButton3" "2"
+# Try to not count the palm of the hand landing on the touchpad
+# as a tap. Not sure if helps.
+ Option "PalmDetect" "1"
+# The following modifies how long and how fast scrolling continues
+# after lifting the finger when scrolling
+ Option "CoastingSpeed" "20"
+ Option "CoastingFriction" "200"
+# Smaller number means that the finger has to travel less distance
+# for it to count as cursor movement. Larger number prevents cursor
+# shaking.
+ Option "HorizHysteresis" "10"
+ Option "VertHysteresis" "10"
+# Prevent two-finger scrolling. Very jerky movement
+ Option "HorizTwoFingerScroll" "0"
+ Option "VertTwoFingerScroll" "0"
+# Use edge scrolling
+ Option "HorizEdgeScroll" "1"
+ Option "VertEdgeScroll" "1"
+EndSection
+@end verbatim
+
+A user reported that the above is only for linux kernel 3.15 or lower. For newer kernels, the touchpad works fine out of the box, except middle tapping.
+
+A user submitted a utility to enable 3-finger tap on this laptop. It's available at @emph{resources/utilities/macbook21-three-finger-tap} in the libreboot git repository. The script is for GNOME, confirmed to work in Trisquel 7.
+
+@ref{#pagetop,Back to top of page.}
+
+Copyright © 2014, 2015 Francis Rowe <info@@gluglug.org.uk>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/hcl/kfsn4-dre.texi b/docs/src/hcl/kfsn4-dre.texi
new file mode 100644
index 0000000..08876b2
--- /dev/null
+++ b/docs/src/hcl/kfsn4-dre.texi
@@ -0,0 +1,88 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title ASUS KFSN4-DRE server/workstation board
+@end titlepage
+
+@node Top
+@top ASUS KFSN4-DRE server/workstation board
+
+@menu
+* ASUS KFSN4-DRE server/workstation board::
+* Form factor::
+* Flash chips::
+* Native graphics initialization::
+* Memory::
+* Hex-core CPUs::
+* Current issues::
+* Other information::
+@end menu
+
+@node ASUS KFSN4-DRE server/workstation board
+@chapter ASUS KFSN4-DRE server/workstation board
+@anchor{#asus-kfsn4-dre-serverworkstation-board}
+This is a server board using AMD hardware (Fam10h). It can also be used for building a high-powered workstation. Powered by libreboot.
+
+@strong{NOTE: This board is unsupported in libreboot 20150518. To use it in libreboot, for now, you must build for it from source using the libreboot git repository.}
+
+Flashing instructions can be found at @uref{../install/index.html#flashrom,../install/index.html#flashrom}
+
+@uref{index.html,Back to previous index}.
+
+@node Form factor
+@chapter Form factor
+@anchor{#form-factor}
+These boards use the SSI EEB 3.61 form factor; make sure that your case supports this. This form factor is similar to E-ATX in that the size is identical, but the position of the screws are different.
+
+@node Flash chips
+@chapter Flash chips
+@anchor{#flash-chips}
+These boards use LPC flash (not SPI), in a PLCC socket. The default flash size 1MiB (8Mbits), and can be upgraded to 2MiB (16Mbits). SST49LF080A is the default that the board uses. SST49LF016C is an example of a 2MiB (16Mbits) chip, which might work. It is believed that 2MiB (16Mbits) is the maximum size available for the flash chip.
+
+@strong{DO NOT hot-swap the chip with your bare hands. Use a PLCC chip extractor. These can be found online. See @uref{http://www.coreboot.org/Developer_Manual/Tools#Chip_removal_tools,http://www.coreboot.org/Developer_Manual/Tools#Chip_removal_tools}}
+
+@node Native graphics initialization
+@chapter Native graphics initialization
+@anchor{#native-graphics-initialization}
+Native graphics initialization exists (XGI Z9s) for this board. Framebuffer- and text-mode both work. A serial port is also available.
+
+@node Memory
+@chapter Memory
+@anchor{#memory}
+DDR2 533/667 Registered ECC. 16 slots. Total capacity up to 64GiB.
+
+@node Hex-core CPUs
+@chapter Hex-core CPUs
+@anchor{#hex-core-cpus}
+PCB revision 1.05G is the best version of this board (the revision number will be printed on the board), because it can use dual hex-core CPUs (Opteron 2400/8400 series). Other revisions are believed to only support dual quad-core CPUs.
+
+@node Current issues
+@chapter Current issues
+@anchor{#current-issues}
+@itemize
+@item
+There seems to be a 30 second bootblock delay (observed by tpearson); the system otherwise boots and works as expected. See @uref{../resources/text/kfsn4-dre/bootlog.txt,kfsn4-dre/bootlog.txt} - this uses the 'simple' bootblock, while tpearson uses the 'normal' bootblock, which tpearson suspects may be a possible cause. This person says that they will look into it. @uref{http://review.coreboot.org/gitweb?p=board-status.git;a=blob;f=asus/kfsn4-dre/4.0-10101-g039edeb/2015-06-27T03:59:16Z/config.txt;h=4742905c185a93fbda8eb14322dd82c70641aef0;hb=055f5df4e000a97453dfad6c91c2d06ea22b8545,This config} doesn't have the issue.
+@item
+Text-mode is a bit jittery (but still usable). (the jitter disappears if using KMS, once the kernel starts. The jitter will remain, if booting the kernel in text-mode).
+@end itemize
+
+@node Other information
+@chapter Other information
+@anchor{#other-information}
+@uref{ftp://ftp.sgi.com/public/Technical%20Support/Pdf%20files/Asus/kfsn4-dre.pdf,specifications}
+
+Copyright © 2015 Francis Rowe <info@@gluglug.org.uk>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/hcl/kgpe-d16.texi b/docs/src/hcl/kgpe-d16.texi
new file mode 100644
index 0000000..14782f1
--- /dev/null
+++ b/docs/src/hcl/kgpe-d16.texi
@@ -0,0 +1,326 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title ASUS KGPE-D16 server/workstation board
+@end titlepage
+
+@node Top
+@top ASUS KGPE-D16 server/workstation board
+
+@menu
+* ASUS KGPE-D16 server/workstation board::
+* Board status compatibility::
+* Form factor::
+* IPMI iKVM module add-on::
+* Flash chips::
+* Native graphics initialization::
+* Current issues::
+@end menu
+
+@node ASUS KGPE-D16 server/workstation board
+@chapter ASUS KGPE-D16 server/workstation board
+@anchor{#asus-kgpe-d16-serverworkstation-board}
+This is a server board using AMD hardware (Fam10h @strong{and Fam15h} CPUs available). It can also be used for building a high-powered workstation. Powered by libreboot. The coreboot port was done by Timothy Pearson of @uref{https://raptorengineeringinc.com/,Raptor Engineering Inc.} and, working with Timothy (and sponsoring the work) merged into libreboot.
+
+@strong{NOTE: This board is unsupported in libreboot 20150518. To use it in libreboot, for now, you must build for it from source using the libreboot git repository.}
+
+Flashing instructions can be found at @uref{../install/index.html#flashrom,../install/index.html#flashrom} - note that external flashing is required (e.g. BBB), if the proprietary (ASUS) firmware is currently installed. If you already have libreboot, by default it is possible to re-flash using software running in GNU/Linux on the KGPE-D16, without using external hardware.
+
+@uref{index.html,Back to previous index}.
+
+@node Board status compatibility
+@chapter Board status (compatibility)
+@anchor{#board-status-compatibility}
+See @uref{https://raptorengineeringinc.com/coreboot/kgpe-d16-status.php,https://raptorengineeringinc.com/coreboot/kgpe-d16-status.php}.
+
+@node Form factor
+@chapter Form factor
+@anchor{#form-factor}
+These boards use the SSI EEB 3.61 form factor; make sure that your case supports this. This form factor is similar to E-ATX in that the size is identical, but the position of the screws are different.
+
+@node IPMI iKVM module add-on
+@chapter IPMI iKVM module add-on
+@anchor{#ipmi-ikvm-module-add-on}
+Don't use it. It uses proprietary firmware and adds a backdoor (remote out-of-band management chip, similar to the @uref{http://libreboot.org/faq/#intelme,Intel Management Engine}. Fortunately, the firmware is unsigned (possibly to replace) and physically separate from the mainboard since it's on the add-on module, which you don't have to install.
+
+@node Flash chips
+@chapter Flash chips
+@anchor{#flash-chips}
+2MiB flash chips are included by default, on these boards. It's on a P-DIP 8 slot (SPI chip). The flash chip can be upgraded to higher sizes: 4MiB, 8MiB or 16MiB. With at least 8MiB, you could feasibly fit a compressed linux+initramfs image (BusyBox+Linux system) into CBFS and boot that, loading it into memory.
+
+Libreboot has configs for 2, 4, 8 and 16 MiB flash chip sizes (default flash chip is 2MiB).
+
+@strong{DO NOT hot-swap the chip with your bare hands. Use a P-DIP 8 chip extractor. These can be found online. See @uref{http://www.coreboot.org/Developer_Manual/Tools#Chip_removal_tools,http://www.coreboot.org/Developer_Manual/Tools#Chip_removal_tools}}
+
+@node Native graphics initialization
+@chapter Native graphics initialization
+@anchor{#native-graphics-initialization}
+Only text-mode is known to work, but linux(kernel) can initialize the framebuffer display (if it has KMS - kernel mode setting).
+
+@node Current issues
+@chapter Current issues
+@anchor{#current-issues}
+@itemize
+@item
+RDIMM memory modules untested, according to tpearson (they'll probably work)
+@item
+LRDIMM memory modules are currently incompatible
+@item
+SAS (via PIKE 2008 module) requires non-free option ROM (and SeaBIOS) to boot from it (theoretically possible to replace, but you can put a kernel in CBFS or on SATA and use that to boot GNU, which can be on a SAS drive. The linux kernel can use those SAS drives (via PIKE module) without an option ROM).
+@item
+IPMI iKVM module (optional add-on card) uses proprietary firmware. Since it's for remote out-of-band management, it's theoretically a backdoor similar to the Intel Management Engine. Fortunately, unlike the ME, this firmware is unsigned which means that a free replacement is theoretically possible. For now, the libreboot project recommends not installing the module. @uref{https://github.com/facebook/openbmc,This project} might be interesting to derive from, for those who want to work on a free replacement. In practise, out-of-band management isn't very useful anyway (or at the very least, it's not a major inconvenience to not have it).
+@item
+Graphics: only text-mode works. See @ref{#graphics,#graphics}
+@end itemize
+
+@menu
+* Hardware specifications::
+@end menu
+
+@node Hardware specifications
+@section Hardware specifications
+@anchor{#hardware-specifications}
+The information here is adapted, from the ASUS website.
+@menu
+* Processor / system bus::
+* Core logic::
+* Memory compatibility with libreboot::
+* Expansion slots::
+* Form factor::
+* ASUS features::
+* Storage::
+* Networking::
+* Graphics::
+* On board I/O::
+* Back I/O ports::
+* Environment::
+* Monitoring::
+* Note::
+@end menu
+
+@node Processor / system bus
+@subsection Processor / system bus
+@anchor{#processor-system-bus}
+@itemize
+@item
+2 CPU sockets (G34 compatible)
+@item
+HyperTransport™ Technology 3.0
+@item
+CPUs supported (not provided by Minifree, yet):
+@itemize
+@item
+AMD Opteron 6100 series (Fam10h. No IOMMU support. @strong{Not} recommended)
+@item
+AMD Opteron 6200 series (Fam15h, with full IOMMU support in libreboot)
+@item
+AMD Opteron 6300 series (Fam15h, with full IOMMU support in libreboot. @strong{Recommended}
+@end itemize
+
+@item
+6.4 GT/s per link (triple link)
+@end itemize
+
+@node Core logic
+@subsection Core logic
+@anchor{#core-logic}
+@itemize
+@item
+AMD SR5690
+@item
+AMD SP5100
+@end itemize
+
+@node Memory compatibility with libreboot
+@subsection Memory compatibility (with libreboot)
+@anchor{#memory-compatibility-with-libreboot}
+@itemize
+@item
+@strong{Total Slots:} 16 (4-channel per CPU, 8 DIMM per CPU), ECC
+@item
+@strong{Capacity:} Maximum up to 256GB RDIMM
+@item
+@strong{Memory Type that is compatible:}
+@itemize
+@item
+DDR3 1600/1333/1066/800 UDIMM*
+@item
+DDR3 1600/1333/1066/800 RDIMM*
+@end itemize
+
+@item
+@strong{Compatible sizes per memory module:}
+@itemize
+@item
+16GB, 8GB, 4GB, 3GB, 2GB, 1GB RDIMM
+@item
+8GB, 4GB, 2GB, 1GB UDIMM
+@end itemize
+
+@end itemize
+
+@node Expansion slots
+@subsection Expansion slots
+@anchor{#expansion-slots}
+@itemize
+@item
+@strong{Total slot:} 6
+@item
+@strong{Slot Location 1:} PCI 32bit/33MHz
+@item
+@strong{Slot Location 2:} PCI-E x16 (Gen2 X8 Link)
+@item
+@strong{Slot Location 3:} PCI-E x16 (Gen2 X16 Link), Auto switch to x8 link if slot 2 is occupied
+@item
+@strong{Slot Location 4:} PCI-E x8 (Gen2 X4 Link)
+@item
+@strong{Slot Location 5:} PCI-E x16 (Gen2 X16 Link)
+@item
+@strong{Slot Location 6:} PCI-E x16 (Gen2 X16 Link), Auto turn off if slot 5 is occupied, For 1U FH/FL Card, MIO supported
+@item
+@strong{Additional Slot 1:} PIKE slot (for SAS drives. See notes above)
+@item
+Follow SSI Location#
+@end itemize
+
+@node Form factor
+@subsection Form factor
+@anchor{#form-factor-1}
+@itemize
+@item
+SSI EEB 3.61 (12"x13")
+@end itemize
+
+@node ASUS features
+@subsection ASUS features
+@anchor{#asus-features}
+@itemize
+@item
+Fan Speed Control
+@item
+Rack Ready (Rack and Pedestal dual use)
+@end itemize
+
+@node Storage
+@subsection Storage
+@anchor{#storage}
+@itemize
+@item
+@strong{SATA controller:}
+@itemize
+@item
+AMD SP5100
+@item
+6 x SATA2 300MB/s
+@end itemize
+
+@item
+@strong{SAS/SATA Controller:}
+@itemize
+@item
+ASUS PIKE2008 3Gbps 8-port SAS card included
+@end itemize
+
+@end itemize
+
+@node Networking
+@subsection Networking
+@anchor{#networking}
+@itemize
+@item
+2 x Intel® 82574L + 1 x Mgmt LAN
+@end itemize
+
+@node Graphics
+@subsection Graphics
+@anchor{#graphics}
+@itemize
+@item
+Aspeed AST2050 with 8MB VRAM
+@end itemize
+
+@node On board I/O
+@subsection On board I/O
+@anchor{#on-board-io}
+@itemize
+@item
+1 x PSU Power Connector (24-pin SSI power connector + 8-pin SSI 12V + 8-pin SSI 12V power connector)
+@item
+1 x Management Connector , Onboard socket for management card
+@item
+3 x USB pin header , Up to 6 Devices
+@item
+1 x Internal A Type USB Port
+@item
+8 x Fan Header , 4pin (3pin/4pin fan dual support)
+@item
+2 x SMBus
+@item
+1 x Serial Port Header
+@item
+1 x TPM header
+@item
+1 x PS/2 KB/MS port
+@end itemize
+
+@node Back I/O ports
+@subsection Back I/O ports
+@anchor{#back-io-ports}
+@itemize
+@item
+1 x External Serial Port
+@item
+2 x External USB Port
+@item
+1 x VGA Port
+@item
+2 x RJ-45
+@item
+1 x PS/2 KB/Mouse
+@end itemize
+
+@node Environment
+@subsection Environment
+@anchor{#environment}
+@itemize
+@item
+@strong{Operation temperature:} 10C ~ 35C
+@item
+@strong{Non operation temperature:} -40C ~ 70C
+@item
+@strong{Non operation humidity:} 20% ~ 90% ( Non condensing)
+@end itemize
+
+@node Monitoring
+@subsection Monitoring
+@anchor{#monitoring}
+@itemize
+@item
+CPU temperatures
+@item
+Fan speed (RPM)
+@end itemize
+
+@node Note
+@subsection Note:
+@anchor{#note}
+@itemize
+@item
+* DDR3 1600 can only be supported with AMD Opteron 6300/6200 series processor
+@end itemize
+
+Copyright © 2015 Francis Rowe <info@@gluglug.org.uk>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/hcl/r400.texi b/docs/src/hcl/r400.texi
new file mode 100644
index 0000000..73332ea
--- /dev/null
+++ b/docs/src/hcl/r400.texi
@@ -0,0 +1,70 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title ThinkPad R400
+@end titlepage
+
+@node Top
+@top ThinkPad R400
+
+@menu
+* ThinkPad R400::
+* LCD compatibly::
+@end menu
+
+@node ThinkPad R400
+@chapter ThinkPad R400
+@anchor{#thinkpad-r400}
+It is believed that all or most R400 laptops are compatible. See notes about @uref{../install/r400_external.html#cpu_compatibility,CPU compatibility} for potential incompatibilities.
+
+There are two possible flash chip sizes for the R400: 4MiB (32Mbit) or 8MiB (64Mbit). This can be identified by the type of flash chip below the palmrest: 4MiB is SOIC-8, 8MiB is SOIC-16.
+
+@strong{The R400 laptops come with the ME (and sometimes AMT in addition) before flashing libreboot. Libreboot disables and removes it by using a modified descriptor: see @uref{gm45_remove_me.html,gm45_remove_me.html}} (contains notes, plus instructions)
+
+Flashing instructions can be found at @uref{../install/index.html#flashrom,../install/index.html#flashrom}
+
+@uref{index.html,Back to previous index}.
+@menu
+* Compatibility without blobs::
+@end menu
+
+@node Compatibility without blobs
+@section Compatibility (without blobs)
+@anchor{#compatibility-without-blobs}
+@menu
+* Hardware virtualization vt-x::
+@end menu
+
+@node Hardware virtualization vt-x
+@subsection Hardware virtualization (vt-x)
+@anchor{#hardware-virtualization-vt-x}
+The R400, when run without CPU microcode updates in coreboot, currently kernel panics if running QEMU with vt-x enabled on 2 cores for the guest. With a single core enabled for the guest, the guest panics (but the host is fine). Working around this in QEMU might be possible; if not, software virtualization should work fine (it's just slower).
+
+On GM45 hardware (with libreboot), make sure that the @emph{kvm} and @emph{kvm_intel} kernel modules are not loaded, when using QEMU.
+
+The following errata datasheet from Intel might help with investigation: @uref{http://download.intel.com/design/mobile/specupdt/320121.pdf,http://download.intel.com/design/mobile/specupdt/320121.pdf}
+
+The R400 is almost identical to the X200, code-wise. See @uref{x200.html,x200.html}.
+
+TODO: put hardware register logs here like on the @uref{x200.html,X200} and @uref{t400.html,T400} page.
+
+@node LCD compatibly
+@chapter LCD compatibly
+@anchor{#lcd-compatibly}
+Not all LCD panels are compatible yet. See @uref{gm45_lcd.html,gm45_lcd.html}.
+
+Copyright © 2014, 2015 Francis Rowe <info@@gluglug.org.uk>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/hcl/r500.texi b/docs/src/hcl/r500.texi
new file mode 100644
index 0000000..f8bd10a
--- /dev/null
+++ b/docs/src/hcl/r500.texi
@@ -0,0 +1,190 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title ThinkPad R500
+@end titlepage
+
+@node Top
+@top ThinkPad R500
+
+@menu
+* ThinkPad R500::
+* LCD compatibly::
+* Issues::
+* Descriptor differences::
+* No Gbe region!::
+@end menu
+
+@node ThinkPad R500
+@chapter ThinkPad R500
+@anchor{#thinkpad-r500}
+It is believed that all or most R500 laptops are compatible. See notes about @uref{../install/r500_external.html#cpu_compatibility,CPU compatibility} for potential incompatibilities.
+
+There are two possible flash chip sizes for the R500: 4MiB (32Mbit) or 8MiB (64Mbit). This can be identified by the type of flash chip below the palmrest: 4MiB is SOIC-8, 8MiB is SOIC-16. @strong{NOTE: this paragraph is being treated with contempt. When an R500 was disassembled, it didn't look like there was an extra place for SOIC-16. It's highly likely that these laptops only have SOIC-8 (4MiB) flash chips. For now, libreboot will distribute 8MiB images just in case. If it is found later on that no 8MiB (SOIC-16) chips exist on the R500, then libreboot will cease to distribute 8MiB ROM images for this laptop. It is only said that the R500 has 4MiB or 8MiB, for now, since this is the case on other GM45 thinkpads that are supported in libreboot.}
+
+@strong{The R400 laptops come with the ME (and sometimes AMT in addition) before flashing libreboot. Libreboot disables and removes it by using a modified descriptor: see @uref{gm45_remove_me.html,gm45_remove_me.html}} (contains notes, plus instructions)
+
+Flashing instructions can be found at @uref{../install/index.html#flashrom,../install/index.html#flashrom}
+
+@strong{NOTE: This board is unsupported in libreboot 20150518. To use it in libreboot, for now, you must build for it from source using the libreboot git repository.}
+
+@uref{index.html,Back to previous index}.
+@menu
+* Compatibility without blobs::
+@end menu
+
+@node Compatibility without blobs
+@section Compatibility (without blobs)
+@anchor{#compatibility-without-blobs}
+@menu
+* Hardware virtualization vt-x::
+@end menu
+
+@node Hardware virtualization vt-x
+@subsection Hardware virtualization (vt-x)
+@anchor{#hardware-virtualization-vt-x}
+The R400, when run without CPU microcode updates in coreboot, currently kernel panics if running QEMU with vt-x enabled on 2 cores for the guest. With a single core enabled for the guest, the guest panics (but the host is fine). Working around this in QEMU might be possible; if not, software virtualization should work fine (it's just slower).
+
+On GM45 hardware (with libreboot), make sure that the @emph{kvm} and @emph{kvm_intel} kernel modules are not loaded, when using QEMU.
+
+The following errata datasheet from Intel might help with investigation: @uref{http://download.intel.com/design/mobile/specupdt/320121.pdf,http://download.intel.com/design/mobile/specupdt/320121.pdf}
+
+@node LCD compatibly
+@chapter LCD compatibly
+@anchor{#lcd-compatibly}
+Not all LCD panels are known to be compatible yet. See @uref{gm45_lcd.html,gm45_lcd.html}.
+
+The R500 is almost identical to the X200, code-wise, but there are some hardware differences. See @uref{x200.html,x200.html}.
+@menu
+* Hardware register dumps::
+@end menu
+
+@node Hardware register dumps
+@section Hardware register dumps
+@anchor{#hardware-register-dumps}
+The coreboot wiki @uref{http://www.coreboot.org/Motherboard_Porting_Guide,shows} how to collect various logs useful in porting to new boards. Following are outputs from the R500:
+
+@itemize
+@item
+Lenovo BIOS 3.13 (EC firmware 1.06):
+@itemize
+@item
+@url{../resources/misc/dumps/r500/}
+@end itemize
+
+@end itemize
+
+@node Issues
+@chapter Issues
+@anchor{#issues}
+@menu
+* False report of overheating automatic shut down::
+* Cardbus slot didn't work when tested::
+@end menu
+
+@node False report of overheating automatic shut down
+@section False report of overheating, automatic shut down
+@anchor{#false-report-of-overheating-automatic-shut-down}
+When attempting to boot Trisquel 7 live USB (GNOME), the following error appears and then the system abruptly shuts down: @strong{thermal thermal_zone1: critical temperature reached(120 C),shutting down}.
+
+This is false. When booting with @strong{acpi=off}, xsensors shows no overheating during a stress test. The system does not feel hot, nor does anything smell like it's burning.
+
+This is most likely caused by an ACPI bug in coreboot, which will have to be investigated. Grep for those things, comparing factory/libreboot (iasl -d or acpidump):
+
+@verbatim
+ Return (C2K(\_SB.PCI0.LPCB.EC.TMP0))
+TMP0, 8, /* Thermal Zone 0 temperature */
+@end verbatim
+
+@node Cardbus slot didn't work when tested
+@section Cardbus slot didn't work when tested
+@anchor{#cardbus-slot-didnt-work-when-tested}
+Investigate.
+
+@node Descriptor differences
+@chapter Descriptor differences
+@anchor{#descriptor-differences}
+The @emph{ich9gen} and @emph{ich9deblob} utilities were modified, to reflect these differences.
+@menu
+* Component 1 Density::
+* flReg1LIMIT::
+* Onboard gigabit ethernet NIC is disabled::
+@end menu
+
+@node Component 1 Density
+@section Component 1 Density
+@anchor{#component-1-density}
+
+@verbatim
+- descriptorStruct.componentSection.flcomp.component1Density = 0x4;
++ descriptorStruct.componentSection.flcomp.component1Density = 0x3;
+@end verbatim
+
+Read page 848 in the ICH9 datasheet, linked to from @uref{gm45_remove_me.html#flash_descriptor_region,gm45_remove_me.html#flash_descriptor_region}. This doesn't break anything, but in the process of debugging descriptor differences on the R500, it was found that this config option isn't being modified in libreboot, for different size ROM images. 4MiB ROM images still contain 0x4 for component1Density. Per datasheets, 0x4 (100) is 8MiB, and 0x3 (011) is 4MiB. @strong{This should be fixed!}
+
+It was 0x3 for this test, because the R500 that was used to create this report had a 4MiB SOIC-8 flash chip.
+
+@node flReg1LIMIT
+@section flReg1.LIMIT
+@anchor{#flreg1.limit}
+
+@verbatim
+- /* descriptorStruct.regionSection.flReg1.LIMIT = 0x07ff; */
++ /* descriptorStruct.regionSection.flReg1.LIMIT = 0x03ff; */
+@end verbatim
+
+Ignore this. This is not used at all, and is instead automatically set, depending on the targetted ROM image size, both in ich9gen and ich9deblob. 0x7ff means 8MiB, and 0x3ff means 4MiB. flReg1 is for the BIOS region. Simply speaking, this is defining the final 4KiB section of the ROM image, where the BIOS region ends.
+
+It was 0x3ff for this test, because the R500 that was used to create this report had a 4MiB SOIC-8 flash chip.
+
+@node Onboard gigabit ethernet NIC is disabled
+@section Onboard gigabit ethernet NIC is disabled
+@anchor{#onboard-gigabit-ethernet-nic-is-disabled}
+
+@verbatim
+- descriptorStruct.ichStraps.ichStrap0.integratedGbe = 0x1;
+- descriptorStruct.ichStraps.ichStrap0.lanPhy = 0x1;
++ descriptorStruct.ichStraps.ichStrap0.integratedGbe = 0x0;
++ descriptorStruct.ichStraps.ichStrap0.lanPhy = 0x0;
+@end verbatim
+
+Most GM45 laptops (e.g. X200, T400, T500, R400) have the @strong{Intel 82567LM} integrated gigabit NIC.
+
+On the R500, a @strong{Broadcom BCM5787M} NIC is present. To make this work, the change above must be made for the R500 descriptor.
+
+@node No Gbe region!
+@chapter No Gbe region!
+@anchor{#no-gbe-region}
+Not shown in the diffs above:
+
+@verbatim
+Original: Descriptor start block: 00000000 ; Descriptor end block: 00000000
+Original: BIOS start block: 00200000 ; BIOS end block: 003ff000
+Original: ME start block: 00001000 ; ME end block: 001f7000
+Original: GBe start block: 00fff000 ; GBe end block: 00000000
+Original: Platform start block: 001f8000 ; Platform end block: 001ff000
+@end verbatim
+
+As explained above, this laptop uses a Broadcom NIC, which means that the Gbe region does not and @emph{should not} exist, since this is for the Intel NIC only.
+
+In the output above, Gbe starts at fff and ends at 000. Base 1FFF or FFF, and limit 0, means that the region is disabled.
+
+In the output above, the ME region is 4KiB larger than on other GM45 systems that have a Gbe region. This accounts for the lack of a Gbe region.
+
+As part of this effort, ich9gen/ich9deblob/demefactory will all be modified to account for the differences above.
+
+Copyright © 2015 Francis Rowe <info@@gluglug.org.uk>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/hcl/t400.texi b/docs/src/hcl/t400.texi
new file mode 100644
index 0000000..2c2b303
--- /dev/null
+++ b/docs/src/hcl/t400.texi
@@ -0,0 +1,88 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title ThinkPad T400
+@end titlepage
+
+@node Top
+@top ThinkPad T400
+
+@menu
+* ThinkPad T400::
+* LCD compatibly::
+@end menu
+
+@node ThinkPad T400
+@chapter ThinkPad T400
+@anchor{#thinkpad-t400}
+It is believed that all or most T400 laptops are compatible. See notes about @uref{../install/t400_external.html#cpu_compatibility,CPU compatibility} for potential incompatibilities.
+
+There are two possible flash chip sizes for the T400: 4MiB (32Mbit) or 8MiB (64Mbit). This can be identified by the type of flash chip below the palmrest: 4MiB is SOIC-8, 8MiB is SOIC-16.
+
+@strong{The T400 laptops come with the ME (and sometimes AMT in addition) before flashing libreboot. Libreboot disables and removes it by using a modified descriptor: see @uref{gm45_remove_me.html,gm45_remove_me.html}} (contains notes, plus instructions)
+
+Flashing instructions can be found at @uref{../install/index.html#flashrom,../install/index.html#flashrom}
+
+@uref{index.html,Back to previous index}.
+@menu
+* Compatibility without blobs::
+@end menu
+
+@node Compatibility without blobs
+@section Compatibility (without blobs)
+@anchor{#compatibility-without-blobs}
+@menu
+* Hardware virtualization vt-x::
+@end menu
+
+@node Hardware virtualization vt-x
+@subsection Hardware virtualization (vt-x)
+@anchor{#hardware-virtualization-vt-x}
+The T400, when run without CPU microcode updates in coreboot, currently kernel panics if running QEMU with vt-x enabled on 2 cores for the guest. With a single core enabled for the guest, the guest panics (but the host is fine). Working around this in QEMU might be possible; if not, software virtualization should work fine (it's just slower).
+
+On GM45 hardware (with libreboot), make sure that the @emph{kvm} and @emph{kvm_intel} kernel modules are not loaded, when using QEMU.
+
+The following errata datasheet from Intel might help with investigation: @uref{http://download.intel.com/design/mobile/specupdt/320121.pdf,http://download.intel.com/design/mobile/specupdt/320121.pdf}
+
+The T400 is almost identical to the X200, code-wise. See @uref{x200.html,x200.html}.
+
+@node LCD compatibly
+@chapter LCD compatibly
+@anchor{#lcd-compatibly}
+Not all LCD panels are compatible yet. See @uref{gm45_lcd.html,gm45_lcd.html}.
+@menu
+* Hardware register dumps::
+@end menu
+
+@node Hardware register dumps
+@section Hardware register dumps
+@anchor{#hardware-register-dumps}
+The coreboot wiki @uref{http://www.coreboot.org/Motherboard_Porting_Guide,shows} how to collect various logs useful in porting to new boards. Following are outputs from the T400:
+
+@itemize
+@item
+T400 with @strong{Winbond W25X64} flash chip (8MiB, SOIC-16) and Lenovo BIOS 2.02 (EC firmware 1.01):
+@itemize
+@item
+@uref{../resources/misc/dumps/logs-t400-bios2.02-ec1.01/,../resources/misc/dumps/logs-t400-bios2.02-ec1.01/}
+@end itemize
+
+@item
+Version of flashrom used for the external flashing/reading logs is the one that libreboot git revision c164960 uses.
+@end itemize
+
+Copyright © 2015 Francis Rowe <info@@gluglug.org.uk>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/hcl/t500.texi b/docs/src/hcl/t500.texi
new file mode 100644
index 0000000..42dcad1
--- /dev/null
+++ b/docs/src/hcl/t500.texi
@@ -0,0 +1,98 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title ThinkPad T500
+@end titlepage
+
+@node Top
+@top ThinkPad T500
+
+@menu
+* ThinkPad T500::
+* LCD compatibly::
+@end menu
+
+@node ThinkPad T500
+@chapter ThinkPad T500
+@anchor{#thinkpad-t500}
+It is believed that all or most T500 laptops are compatible. See notes about @uref{../install/t500_external.html#cpu_compatibility,CPU compatibility} for potential incompatibilities.
+
+There are two possible flash chip sizes for the T500: 4MiB (32Mbit) or 8MiB (64Mbit). This can be identified by the type of flash chip below the palmrest: 4MiB is SOIC-8, 8MiB is SOIC-16.
+
+@strong{The T500 laptops come with the ME (and sometimes AMT in addition) before flashing libreboot. Libreboot disables and removes it by using a modified descriptor: see @uref{gm45_remove_me.html,gm45_remove_me.html}} (contains notes, plus instructions)
+
+Flashing instructions can be found at @uref{../install/index.html#flashrom,../install/index.html#flashrom}
+
+@uref{index.html,Back to previous index}.
+@menu
+* Compatibility without blobs::
+@end menu
+
+@node Compatibility without blobs
+@section Compatibility (without blobs)
+@anchor{#compatibility-without-blobs}
+@menu
+* Hardware virtualization vt-x::
+@end menu
+
+@node Hardware virtualization vt-x
+@subsection Hardware virtualization (vt-x)
+@anchor{#hardware-virtualization-vt-x}
+The T500, when run without CPU microcode updates in coreboot, currently kernel panics if running QEMU with vt-x enabled on 2 cores for the guest. With a single core enabled for the guest, the guest panics (but the host is fine). Working around this in QEMU might be possible; if not, software virtualization should work fine (it's just slower).
+
+On GM45 hardware (with libreboot), make sure that the @emph{kvm} and @emph{kvm_intel} kernel modules are not loaded, when using QEMU.
+
+The following errata datasheet from Intel might help with investigation: @uref{http://download.intel.com/design/mobile/specupdt/320121.pdf,http://download.intel.com/design/mobile/specupdt/320121.pdf}
+
+The T500 is almost identical to the X200, code-wise. See @uref{x200.html,x200.html}.
+
+@node LCD compatibly
+@chapter LCD compatibly
+@anchor{#lcd-compatibly}
+Not all LCD panels are compatible yet. See @uref{gm45_lcd.html,gm45_lcd.html}.
+@menu
+* Descriptor and Gbe differences::
+* Hardware register dumps::
+@end menu
+
+@node Descriptor and Gbe differences
+@section Descriptor and Gbe differences
+@anchor{#descriptor-and-gbe-differences}
+See @uref{../resources/misc/dumps/t500_x200_descriptor/descriptor_diff_t500_x200.txt,../resources/misc/dumps/t500_x200_descriptor/descriptor_diff_t500_x200.txt} and @uref{../resources/misc/dumps/t500_x200_descriptor/gbe_diff_t500_x200.txt,../resources/misc/dumps/t500_x200_descriptor/gbe_diff_t500_x200.txt}
+
+The patches above are based on the output from ich9deblob on a factory.rom image dumped from the T500 with a SOIC-8 4MiB flash chip. The patch re-creates the X200 descriptor/gbe source, so the commands were something like:@* $ @strong{diff -u t500gbe x200gbe}@* $ @strong{diff -u t500descriptor x200descriptor}
+
+ME VSCC table is in a different place and a different size on the T500. Libreboot disables and removes the ME anyway, so it doesn't matter.
+
+The very same descriptor/gbe used on the X200 (generated by @uref{gm45_remove_me.html#ich9gen,ich9gen}) was re-used on the T500, and it still worked.
+
+@node Hardware register dumps
+@section Hardware register dumps
+@anchor{#hardware-register-dumps}
+The coreboot wiki @uref{http://www.coreboot.org/Motherboard_Porting_Guide,shows} how to collect various logs useful in porting to new boards. Following are outputs from the T500:
+
+@itemize
+@item
+T500 with @strong{Macronix MX25L3205D} flash chip (4MiB, SOIC-8) and Lenovo BIOS 3.13 7VET83WW (EC firmware 1.06):
+@itemize
+@item
+@uref{../resources/misc/dumps/t500log/,../resources/misc/dumps/t500log/}
+@end itemize
+
+@end itemize
+
+Copyright © 2015 Francis Rowe <info@@gluglug.org.uk>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/hcl/x200.texi b/docs/src/hcl/x200.texi
new file mode 100644
index 0000000..76d5bad
--- /dev/null
+++ b/docs/src/hcl/x200.texi
@@ -0,0 +1,220 @@
+\input texinfo
+@documentencoding UTF-8
+
+@macro textstrikeout{text}
+~~\text\~~
+@end macro
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title ThinkPad X200
+@end titlepage
+
+@node Top
+@top ThinkPad X200
+
+@menu
+* ThinkPad X200::
+* RAM S3 and microcode updates::
+@end menu
+
+@node ThinkPad X200
+@chapter ThinkPad X200
+@anchor{#thinkpad-x200}
+It is believed that all X200 laptops are compatible. X200S and X200 Tablet will also work, @ref{#x200s,depending on the configuration}.
+
+It *might* be possible to put an X200 motherboard in an X201 chassis, though this is currently untested by the libreboot project. The same may also apply between X200S and X201S; again, this is untested. @strong{It's most likely true.}
+
+There are two possible flash chip sizes for the X200: 4MiB (32Mbit) or 8MiB (64Mbit). This can be identified by the type of flash chip below the palmrest: 4MiB is SOIC-8, 8MiB is SOIC-16.
+
+@strong{The X200 laptops come with the ME (and sometimes AMT in addition) before flashing libreboot. Libreboot disables and removes it by using a modified descriptor: see @uref{gm45_remove_me.html,gm45_remove_me.html}} (contains notes, plus instructions)
+
+Flashing instructions can be found at @uref{../install/index.html#flashrom,../install/index.html#flashrom}
+
+@uref{index.html,Back to previous index}.
+@menu
+* Compatibility without blobs::
+* X200S and X200 Tablet::
+* Trouble undocking button doesn't work::
+* LCD compatibility list::
+* How to tell if it has an LED or CCFL?::
+* Hardware register dumps::
+@end menu
+
+@node Compatibility without blobs
+@section Compatibility (without blobs)
+@anchor{#compatibility-without-blobs}
+@menu
+* Hardware virtualization vt-x::
+@end menu
+
+@node Hardware virtualization vt-x
+@subsection Hardware virtualization (vt-x)
+@anchor{#hardware-virtualization-vt-x}
+The X200, when run without CPU microcode updates in coreboot, currently kernel panics if running QEMU with vt-x enabled on 2 cores for the guest. With a single core enabled for the guest, the guest panics (but the host is fine). Working around this in QEMU might be possible; if not, software virtualization should work fine (it's just slower).
+
+On GM45 hardware (with libreboot), make sure that the @emph{kvm} and @emph{kvm_intel} kernel modules are not loaded, when using QEMU.
+
+The following errata datasheet from Intel might help with investigation: @uref{http://download.intel.com/design/mobile/specupdt/320121.pdf,http://download.intel.com/design/mobile/specupdt/320121.pdf}
+
+@node X200S and X200 Tablet
+@section X200S and X200 Tablet.
+@anchor{#x200s-and-x200-tablet.}
+X200S and X200 Tablet have raminit issues at the time of writing (GS45 chipset. X200 uses GM45).
+
+X200S and X200 Tablet are known to work, but only with certain CPU+RAM configurations. The current stumbling block is RCOMP and SFF, mentioned in @uref{https://www.cs.cmu.edu/~410/doc/minimal_boot.pdf,https://www.cs.cmu.edu/~410/doc/minimal_boot.pdf}.
+
+The issues mostly relate to raminit (memory initialization). With an unpatched coreboot, you get the following: @uref{../resources/text/x200s/cblog00.txt,x200s/cblog00.txt}. No SODIMM combination that was tested would work. At first glance, it looks like GS45 (chipset that X200S uses. X200 uses GM45) is unsupported, but there is a workaround that can be used to make certain models of the X200S work, depending on the RAM.
+
+The datasheet for GS45 describes two modes: low-performance and high-performance. Low performance uses the SU range of ultra-low voltage procesors (SU9400, for example), and high-performance uses the SL range of processors (SL9400, for example). According to datasheets, GS45 behaves very similarly to GM45 when operating in high-performance mode.
+
+The theory then was that you could simply remove the checks in coreboot and make it pass GS45 off as GM45; the idea is that, with a high-performance mode CPU (SL9400, for example) it would just boot up and work.
+
+This suspicion was confirmed with the following log: @uref{../resources/text/x200s/cblog01.txt,x200s/cblog01.txt}. The memory modules in this case are 2x4GB. @textstrikeout{@strong{However, not all configurations work: @uref{../resources/text/x200s/cblog02.txt,x200s/cblog02.txt} (2x2GB) and @uref{../resources/text/x200s/cblog03.txt,x200s/cblog03.txt} (1x2GB) show a failed bootup.}} @emph{False alarm. The modules were mixed (non-matching). X200S with high-performance mode CPU will work so long as you use matching memory modules (doesn't matter what size).}
+
+This was then pushed as a patch for coreboot, which can be found at @uref{http://review.coreboot.org/#/c/7786/,http://review.coreboot.org/#/c/7786/} (libreboot merges this patch in coreboot-libre now. Check the 'getcb' script in src or git).
+@menu
+* Proper GS45 raminit::
+@end menu
+
+@node Proper GS45 raminit
+@subsection Proper GS45 raminit
+@anchor{#proper-gs45-raminit}
+A new northbridge gs45 should be added to coreboot, based on gm45, and a new port x200st (X200S and X200T) should be added based on the x200 port.
+
+This port would have proper raminit. Alternatively, gs45 (if raminit is taken to be the only issue with it) can be part of gm45 northbridge support (and X200S/Tablet being part of the X200 port) with conditional checks in the raminit that make raminit work differently (as required) for GS45. nico_h and pgeorgi/patrickg in the coreboot IRC channel should know more about raminit on gm45 and likely gs45.
+
+pgeorgi recommends to run SerialICE on the factory BIOS (for X200S), comparing it with X200 (factory BIOS) and X200 (gm45 raminit code in coreboot), to see what the differences are. Then tweak raminit code based on that.
+
+@node Trouble undocking button doesn't work
+@section Trouble undocking (button doesn't work)
+@anchor{#trouble-undocking-button-doesnt-work}
+This person seems to have a workaround: @uref{https://github.com/the-unconventional/libreboot-undock,https://github.com/the-unconventional/libreboot-undock}
+
+@node LCD compatibility list
+@section LCD compatibility list
+@anchor{#lcd-compatibility-list}
+LCD panel list (X200 panels listed there): @uref{http://www.thinkwiki.org/wiki/TFT_display,http://www.thinkwiki.org/wiki/TFT_display}
+
+All LCD panels for the X200, X200S and X200 Tablet are known to work.
+
+@ref{#pagetop,Back to top of page.}
+@menu
+* AFFS/IPS panels::
+* X200S::
+@end menu
+
+@node AFFS/IPS panels
+@subsection AFFS/IPS panels
+@anchor{#affsips-panels}
+@menu
+* X200::
+@end menu
+
+@node X200
+@subsubsection X200
+@anchor{#x200}
+Adapted from @uref{https://github.com/bibanon/Coreboot-ThinkPads/wiki/ThinkPad-X200,https://github.com/bibanon/Coreboot-ThinkPads/wiki/ThinkPad-X200}
+
+Look at wikipedia for difference between TN and IPS panels. IPS have much better colour/contrast than a regular TN, and will typically have good viewing angles.
+
+These seem to be from the X200 tablet. You need to find one without the glass touchscreen protection on it (might be able to remove it, though). It also must not have a digitizer on it (again, might be possible to just simply remove the digitizer).
+
+@itemize
+@item
+BOE-Hydis HV121WX4-120, HV121WX4-110 or HV121WX4-100 - cheap-ish, might be hard to find
+@item
+Samsung LTN121AP02-001 - common to find, cheap
+@end itemize
+
+@strong{If your X200 has an LED backlit panel in it, then you also need to get an inverter and harness cable that is compatible with the CCFL panels. To see which panel type you have, see @ref{#led_howtotell,#led_howtotell}. If you need the inverter/cable, here are part numbers: 44C9909 for CCFL LVDS cable with bluetooth and camera connections, and 42W8009 or 42W8010 for the inverter.}
+
+There are glossy and matte versions of these. Matte means anti-glare, which is what you want (in this authors opinion).
+
+Refer to the HMM (hardware maintenance manual) for how to replace the screen.
+
+Sources:
+
+@itemize
+@item
+@uref{http://forum.thinkpads.com/viewtopic.php?f=2&t=84941,ThinkPad Forums - Matte AFFS Panel on X200}
+@item
+@uref{http://forum.thinkpads.com/viewtopic.php?p=660662#p660662,ThinkPad Forums - Parts for X200 AFFS Mod}
+@item
+@uref{http://thinkwiki.de/X200_Displayumbau,ThinkWiki.de - X200 Displayumbau} (achtung: du musst lesen und/oder spreche deutsch; oder ein freund fur hilfe)
+@end itemize
+
+@node X200S
+@subsection X200S
+@anchor{#x200s}
+@uref{http://forum.thinkpads.com/viewtopic.php?p=618928#p618928,http://forum.thinkpads.com/viewtopic.php?p=618928#p618928} explains that the X200S screens/assemblies are thinner. You need to replace the whole lid with one from a normal X200/X201.
+
+@ref{#pagetop,Back to top of page.}
+
+@node How to tell if it has an LED or CCFL?
+@section How to tell if it has an LED or CCFL?
+@anchor{#how-to-tell-if-it-has-an-led-or-ccfl}
+Some X200s have a CCFL backlight and some have an LED backlight, in their LCD panel. This also means that the inverters will vary, so you must be careful if ever replacing either the panel and/or inverter. (a CCFL inverter is high-voltage and will destroy an LED backlit panel).
+
+CCFLs contain mercury. An X200 with a CCFL backlight will (@strong{}unless it has been changed to an LED, with the correct inverter. Check with your supplier!) the following: @emph{"This product contains Lithium Ion Battery, Lithium Battery and a lamp which contains mercury; dispose according to local, state or federal laws"} (one with an LED backlit panel will say something different).
+
+@ref{#pagetop,Back to top of page.}
+
+@node Hardware register dumps
+@section Hardware register dumps
+@anchor{#hardware-register-dumps}
+The coreboot wiki @uref{http://www.coreboot.org/Motherboard_Porting_Guide,shows} how to collect various logs useful in porting to new boards. Following are outputs from the X200:
+
+@itemize
+@item
+BIOS 3.15, EC 1.06
+@itemize
+@item
+@url{../resources/misc/dumps/x200/}
+@end itemize
+
+@end itemize
+
+@node RAM S3 and microcode updates
+@chapter RAM, S3 and microcode updates
+@anchor{#ram-s3-and-microcode-updates}
+Not all memory modules work. Most of the default ones do, but you have to be careful when upgrading to 8GiB; some modules work, some don't.
+
+pehjota started collecting some steppings for different CPUs on several X200 laptops. You can get the CPUID by running: @* $ @strong{dmesg | sed -n 's/^.* microcode: CPU0 sig=0x\([^,]*\),.*$/\1/p'}
+
+What pehjota wrote: The laptops that have issues resuming from suspend, as well as a laptop that (as I mentioned earlier in #libreboot) won't boot with any Samsung DIMMs, all have CPUID 0x10676 (stepping M0).
+
+What pehjota wrote: Laptops with CPUID 0x167A (stepping R0) resume properly every time and work with Samsung DIMMs. I'll need to do more testing on more units to better confirm these trends, but it looks like the M0 microcode is very buggy. That would also explain why I didn't have issues with Samsung DIMMs with the Lenovo BIOS (which would have microcode updates). I wonder if VT-x works on R0.
+
+What pehjota wrote: As I said, 10676 is M0 and 1067A is R0; those are the two CPUIDs and steppings for Intel Core 2 Duo P8xxx CPUs with factory microcode. (1067 is the family and model, and 6 or A is the stepping ID.)
+
+@strong{TODO: check the CPUIDs and test S3 resume and/or KVM on any C2D systems (including non-P8xxx ones, which I don't have here) you have available. I'd be curious if you could confirm these results.} It might not be coreboot that's buggy with raminit/S3; it might just be down to the microcode updates.
+@menu
+* Unsorted notes::
+@end menu
+
+@node Unsorted notes
+@section Unsorted notes
+@anchor{#unsorted-notes}
+
+@verbatim
+<sgsit> do you know if it's possible to flash thinkpads over the LPC debug connector at the front edge?
+<sgsit> that would make life much easier for systems like this
+<sgsit> all the Wistron manufactured systems have this thing called a "golden finger", normally at the front edge of the board
+<sgsit> you can plug a board in which gives diagnostic codes but i'm wondering whether it is capable of more
+<sgsit> http://www.endeer.cz/bios.tools/bios.html
+@end verbatim
+
+Copyright © 2014, 2015 Francis Rowe <info@@gluglug.org.uk>@* Copyright © 2015 Patrick "P. J." McDermott <pj@@pehjota.net>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/index.texi b/docs/src/index.texi
new file mode 100644
index 0000000..aa73d53
--- /dev/null
+++ b/docs/src/index.texi
@@ -0,0 +1,135 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title Libreboot project documentation
+@end titlepage
+
+@node Top
+@top Libreboot project documentation
+
+@menu
+* Libreboot project documentation::
+* Table of contents::
+* About the libreboot project::
+* How do I know what version I'm running?::
+@end menu
+
+@node Libreboot project documentation
+@chapter Libreboot project documentation
+@anchor{#libreboot-project-documentation}
+Information about this release can be found at @uref{release.html,release.html}. Always check @uref{http://libreboot.org,libreboot.org} for updates.
+
+@ref{#why,What is libreboot?}
+
+@ref{#version,How do I know what version I'm running?}
+
+@node Table of contents
+@chapter Table of contents
+@anchor{#table-of-contents}
+@itemize
+@item
+@uref{hcl/index.html,Hardware compatibility list} - @uref{https://www.gnu.org/distros/,GNU/Linux} is expected to be running on your device.
+@item
+@uref{install/index.html,How to install libreboot}
+@item
+@uref{gnulinux/index.html,How to install GNU/Linux on a libreboot system}
+@item
+@uref{git/index.html,How to use the git repository and build libreboot from source}
+@itemize
+@item
+@uref{maintain/index.html,Maintaining libreboot}
+@end itemize
+
+@item
+@uref{security/index.html,Hardware security}
+@item
+@uref{hardware/index.html,Hardware maintenance}
+@item
+@uref{depthcharge/index.html,Depthcharge payload}
+@item
+@uref{grub/index.html,GRUB payload}
+@item
+@uref{misc/index.html,Miscellaneous}
+@end itemize
+
+@node About the libreboot project
+@chapter About the libreboot project
+@anchor{#about-the-libreboot-project}
+Libreboot originally began during December 2013, as a commercial effort by @uref{http://gluglug.org.uk/,Gluglug} to achieve @uref{https://www.fsf.org/resources/hw/endorsement/respects-your-freedom,RYF} endorsement for a modified ThinkPad X60 (the first system to ever be added to libreboot).
+
+Back then, the name @emph{libreboot} didn't exist; the project was nameless, referring to itself as a @emph{deblobbed version of coreboot}. The project named itself libreboot at some point during early 2014, and has since rapidly expanded to support more hardware and become more user-friendly.
+
+Libreboot is a @uref{http://coreboot.org/,coreboot} distribution (distro) with proprietary software removed, intended to be a @uref{https://www.fsf.org/about/what-is-free-software,free} (libre) 'BIOS' replacement for your computer. The project is aimed at users, attempting to make coreboot as easy to use as possible. Read the full @uref{https://www.gnu.org/philosophy/free-sw.html,Free Software definition}.
+
+Libreboot has many practical advantages over @uref{https://gnu.org/philosophy/proprietary/,proprietary} boot firmware, such as faster boot speeds and better security. You can @uref{gnulinux/index.html,install GNU/Linux with encrypted /boot/}, @uref{http://www.coreboot.org/GRUB2#signed_kernels,verify GPG signatures on your kernel}, put a kernel in the flash chip and more.
+@menu
+* The libreboot project has three main goals::
+* Libreboot is a coreboot distribution not a coreboot fork::
+* Libreboot is a 'stable' version of coreboot::
+@end menu
+
+@node The libreboot project has three main goals
+@section The libreboot project has three main goals:
+@anchor{#the-libreboot-project-has-three-main-goals}
+@itemize
+@item
+@emph{@strong{Recommend and distribute only free software}}. Coreboot distributes certain pieces of proprietary software which is needed on some systems. Examples can include things like CPU microcode updates, memory initialization blobs and so on. The coreboot project sometimes recommends adding more blobs which it does not distribute, such as the Video BIOS or Intel's @emph{Management Engine}. However, a lot of dedicated and talented individuals in coreboot work hard to replace these blobs whenever possible.
+@item
+@emph{@strong{Support as much hardware as possible!}} Libreboot supports less hardware than coreboot, because most systems from coreboot still require certain proprietary software to work properly. Libreboot is an attempt to support as much hardware as possible, without any proprietary software.
+@item
+@emph{@strong{Make coreboot easy to use}}. Coreboot is notoriously difficult to install, due to an overall lack of user-focussed documentation and support. Most people will simply give up before attempting to install coreboot.@*@* Libreboot attempts to bridge this divide, making sure that everything from building to installing coreboot is automated, as much as is feasibly possible. Secondly, the project produces documentation aimed at non-technical users. Thirdly, the project attempts to provide excellent user support via mailing lists and IRC.@*@* Libreboot already comes with a payload (GRUB), flashrom and other needed parts. Everything is fully integrated, in a way where most of the complicated steps that are otherwise required, are instead done for the user in advance.@*@* You can download ROM images for your libreboot system and install them, without having to build anything from source. The build system is also fully automated, so building from source is easy if you wanted to do that (for whatever reason).
+@end itemize
+
+@node Libreboot is a coreboot distribution not a coreboot fork
+@section Libreboot is a coreboot distribution, not a coreboot fork
+@anchor{#libreboot-is-a-coreboot-distribution-not-a-coreboot-fork}
+Libreboot is not a fork of coreboot. Every so often, the project re-bases on the latest version of coreboot, with the number of custom patches in use minimized.
+
+All new coreboot development should be done in coreboot (upstream), not libreboot! Libreboot is about deblobbing and packaging coreboot in a user-friendly way, where most work is already done for the user.
+
+For example, if you wanted to add a new board to libreboot, you should add it to coreboot first. Libreboot will automatically receive your code at a later date, when it updates itself.
+
+The deblobbed coreboot tree used in libreboot is referred to as @emph{coreboot-libre}, to distinguish it as a component of @emph{libreboot}.
+
+@node Libreboot is a 'stable' version of coreboot
+@section Libreboot is a 'stable' version of coreboot
+@anchor{#libreboot-is-a-stable-version-of-coreboot}
+@itemize
+@item
+Coreboot uses the @uref{https://en.wikipedia.org/wiki/Rolling_release,rolling release} model, which means that it is not guaranteed to be stable, or to even work at all on a given day. Coreboot does have a strict code review process, but being such a large project with so many contributors, regressions are always possible.
+@item
+Libreboot freezes on a particular revision of coreboot, making sure that everything works properly, making fixes on top of that and repeating this during each subsequent update to a later version of coreboot. By doing this, it provides a stronger guarantee to the user that the firmware will be reliable, and not break their system.
+@end itemize
+
+@ref{#pagetop,Back to top of page.}
+
+@node How do I know what version I'm running?
+@chapter How do I know what version I'm running?
+@anchor{#how-do-i-know-what-version-im-running}
+If you are at least 127 commits after release 20150518 (commit message @emph{build/roms/helper: add version information to CBFS}) (or you have any @strong{upstream} stable release of libreboot after 20150518), then you can press C at the GRUB console, and use this command to find out what version of libreboot you have:@* @strong{cat (cbfsdisk)/lbversion}@* This will also work on non-release images (the version string is automatically generated, using @emph{git describe --tags HEAD}), built from the git repository. A file named @emph{version} will also be included in the archives that you downloaded (if you are using release archives).
+
+If it exists, you can also extract this @emph{lbversion} file by using the @emph{cbfstool} utility which libreboot includes, from a ROM image that you either dumped or haven't flashed yet. In GNU/Linux, run cbfstool on your ROM image (@emph{libreboot.rom}, in this example):@* $ @strong{./cbfstool libreboot.rom extract -n lbversion -f lbversion}@* You will now have a file, named @emph{lbversion}, which you can read in whatever program it is that you use for reading/writing text files.
+
+For git, it's easy. Just check the git log.
+
+For releases on or below 20150518, or snapshots generated from the git repository below 127 commits after 20150518, you can find a file named @emph{commitid} inside the archives. If you are using pre-built ROM images from the libreboot project, you can press C in GRUB for access to the terminal, and then run this command:@* @strong{lscoreboot}@* You may find a date in here, detailing when that ROM image was built. For pre-built images distributed by the libreboot project, this is a rough approximation of what version you have, because the version numbers are dated, and the release archives are typically built on the same day as the release; you can correlate that with the release information in @uref{release.html,release.html}.
+
+You can also check the documentation that came with your archives, and in @emph{release.html} will be the information about the version of libreboot that you are using.
+
+Generally speaking, it is advisable to use the latest version of libreboot.
+
+Copyright © 2014, 2015 Francis Rowe <info@@gluglug.org.uk>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/install/bbb_ehci.texi b/docs/src/install/bbb_ehci.texi
new file mode 100644
index 0000000..8a25db3
--- /dev/null
+++ b/docs/src/install/bbb_ehci.texi
@@ -0,0 +1,400 @@
+\input texinfo
+@documentencoding UTF-8
+
+@macro textsuperscript{text}
+@iftex
+@textsuperscript{\text\}
+@end iftex
+@ifnottex
+^@{\text\@}
+@end ifnottex
+@end macro
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title EHCI debugging on the BeagleBone Black
+@end titlepage
+
+@node Top
+@top EHCI debugging on the BeagleBone Black
+
+@menu
+* EHCI debugging on the BeagleBone Black::
+* EHCI debugging::
+@end menu
+
+@node EHCI debugging on the BeagleBone Black
+@chapter EHCI debugging on the BeagleBone Black
+@anchor{#ehci-debugging-on-the-beaglebone-black}
+@uref{index.html,Back to previous index}
+
+@node EHCI debugging
+@chapter EHCI debugging
+@anchor{#ehci-debugging}
+@enumerate
+@item
+@ref{#FindUSBportonthetargetthatsupportsEHCIdebug,Find USB port on the target that supports EHCI debug}
+@item
+@ref{#InitialsetupofBBBtoactasEHCIdebugdongle,Initial setup of BBB to act as EHCI debug dongle}
+@item
+@ref{#PatchBBBsgdbgpmoduleoptionalbuthighlyrecommended,Patch BBB's @code{g_dbgp} module (optional, but highly recommended)}
+@item
+@ref{#ConfigurelibrebootwithEHCIdebug,Configure libreboot with EHCI debug}
+@enumerate
+@item
+@ref{#SelectingHCDIndexandUSBDebugport,Selecting @code{HCD Index} and @code{USB Debug port}}
+@end enumerate
+
+@item
+@ref{#Howtogetthedebuglogs,How to get the debug logs}
+@item
+@ref{#EnebleEHCIDebugonthetargetskerneloptionalrecommended,Eneble EHCI Debug on the target's kernel (optional, recommended)}
+@item
+@ref{#References,References}
+@end enumerate
+
+If your computer does not boot after installing libreboot, it is very useful to get debug logs from it, from the payload (grub) and/or the kernel (if gets to there). All of them stream debug logs on the available serial (RS-232) by default. However, most of todays laptops lack RS-232 port. The other option is to stream the logs to USB EHCI debug port.
+
+This section explains step-by-step how to setup BBB as a “USB EHCI debug dongle” and configure libreboot and the linux kernel to stream logs to it (TODO: grub).
+
+I will refer to three computers:
+
+@itemize
+@item
+@strong{host} - this is the computer you use, have tools, compiler, Internet, etc
+@item
+@strong{BBB} - Beaglebone Black (rev. B or higher, i use rev. C)
+@item
+@strong{target} - the computer you are trying to install liberboot
+@end itemize
+
+@node Find USB port on the target that supports EHCI debug
+@subsection Find USB port on the target that supports EHCI debug
+@anchor{#find-usb-port-on-the-target-that-supports-ehci-debug}
+Not all USB controllers support EHCI debug (see: @uref{http://www.coreboot.org/EHCI_Debug_Port#Hardware_capability,EHCI Debug Port} ). Even more, if a USB controller supports EHCI debug, it is available only @strong{on a single port} that might or might not be exposed externally.
+
+@itemize
+@item
+You need running OS (GNU/Linux) on your target for this step (If you've flashed libreboot and it does not boot, you have to flush back the stock bios)
+@item
+You need USB memory stick (the data on it will not be touched).
+@item
+The EHCI debugging can not be done through external hub, BBB must be connected directly to the debug port of the controller (so, no hubs)
+@end itemize
+
+@itemize
+@item
+Download@textsuperscript{@ref{#___fn1,1}} @uref{http://www.coreboot.org/pipermail/coreboot/attachments/20080909/ae11c291/attachment.sh,this} shell script.
+@end itemize
+
+@enumerate
+@item
+Plug the usb stick in the first available usb port
+@item
+Run the script, you will get output similar to following:
+@item
+The buses the support debug are Bus 3 (0000:00:1a.0) on Port 1 and Bus 4 (0000:00:1d.0) on port 2. Your usb stick is plugged on Bus 1, Port 3
+@item
+Repeat the steps, plugging the USB stick in the next available port
+@item
+Go through all available ports and remember(write down) those for which bus/port of the usb stick matches one of the bus/port that support debug (bold).
+@end enumerate
+
+Remember (write down) for each port (external plug) you found that supports debug: @strong{PCI device id, the bus id, the port number, and the physical location of the usb plug.}
+
+If you do not find a match, you can not get debug over EHCI. Sorry.
+
+@textsuperscript{1} The guys from coreboot were talking about including the script in coreboot distribution (check the status).
+
+@node Initial setup of BBB to act as EHCI debug dongle
+@subsection Initial setup of BBB to act as EHCI debug dongle
+@anchor{#initial-setup-of-bbb-to-act-as-ehci-debug-dongle}
+BBB must be powered with a barrel power connector since the mini-B USB plug will be used for the EHCI debug stream. So you will need:
+
+@itemize
+@item
+power supply (5V, 2A(10W) is sufficient).
+@item
+an extra usb cable: A to mini-B
+@end itemize
+
+(On BBB) The linux kernel includes module (g_dbgp that enables one of the usb ports on a computer to behave as EHCI debug dongle. Make sure you have this module available on your BBB (Debian 7.8 that comes with BBB should have it), if not, you should compile it yourself (see next section):
+
+@verbatim
+ls /lib/modules/3.8.13-bone70/kernel/drivers/usb/gadget/g_dbgp.ko
+@end verbatim
+
+Unload all other g_* modules:
+
+@verbatim
+# lsmod
+# rmmod g_multi
+...
+@end verbatim
+
+Then load g_dbgp :
+
+@verbatim
+# modprobe g_dbgp
+# lsmod # should show that g_dbgp is loaded, and no other g_*
+@end verbatim
+
+Plug the mini-B side of the USB cable in your BBB and the A side in your target. Then one of the usb devices on your target (with lsusb ) should be:
+
+@verbatim
+Bus 001 Device 024: ID 0525:c0de Netchip Technology, Inc.
+@end verbatim
+
+If you see the device on the target, you are good to continue to the next step.
+
+@node Patch BBB's g_dbgp module optional but highly recommended
+@subsection Patch BBB's g_dbgp module (optional, but highly recommended)
+@anchor{#patch-bbbs-g_dbgp-module-optional-but-highly-recommended}
+For the reasons why you need this, see: @uref{http://www.coreboot.org/EHCI_Gadget_Debug,EHCI Gadget Debug}.@*Make sure that you have cross compiling environment for arm-linux-gnueabihf setup on your @emph{host}.
+
+@itemize
+@item
+On BBB: uname -r - this will give you version number like 3.8.13-bone70 (I will refer to this as: $mav.$miv-$lv: where mav=3.8, miv=13, lv=bone70
+@item
+Get the BBB kernel ready on your host for cross-compiling:
+@end itemize
+
+@verbatim
+$ cd $work_dir
+$ git clone https://github.com/beagleboard/kernel.git
+$ cd kernel
+$ git checkout $mav (see above)
+$ ./patch.sh
+$ wget http://arago-project.org/git/projects/?p=am33x-cm3.git\;a=blob_plain\;f=bin/am335x-pm-firmware.bin\;hb=HEAD -O kernel/firmware/am335x-pm-firmware.bin
+$ cp configs/beaglebone kernel/arch/arm/configs/beaglebone_defconfig
+@end verbatim
+
+@itemize
+@item
+Download the patch from @uref{http://www.coreboot.org/images/8/88/Ehci-debug-gadget-patches.tar.gz,here}
+@item
+tar -xf Ehci-debug-gadget-patches.tar.gz (will create dir: usbdebug-gadget)
+@item
+Note that there are two patches (patch_1 and patch_2) for each of the two different version of the kernel (3.8 and 3.10). I will use 3.8. (If using kernel 3.12 patch_1 is not needed)
+@item
+cd kernel (note that this is one more level: you should be in $work_dir/kernel/kernel)
+@item
+Apply the patches:
+@end itemize
+
+@verbatim
+git apply ../usbdebug-gadget/v3.8-debug-gadget/0001-usb-dbgp-gadget-Fix-re-connecting-after-USB-disconne.patch
+git apply ../usbdebug-gadget/v3.8-debug-gadget/0002-usb-serial-gadget-no-TTY-hangup-on-USB-disconnect-WI.patch
+;
+make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- beaglebone_defconfig -j4@
+@end verbatim
+
+@itemize
+@item
+You should also apply the linux-libre @emph{deblob} script to turn it into linux-libre (deletes all the blobs from the linux kernel). @uref{http://www.fsfla.org/ikiwiki/selibre/linux-libre/,fsfla website} - see @uref{http://www.fsfla.org/svn/fsfla/software/linux-libre/scripts/,scripts}.
+@item
+Get your current BBB kernel config (from: /boot/config-<ver>) and copy it to your host as $work_dir/kernel/kernel/.config
+@item
+Set proper version number:
+@itemize
+@item
+On your host, edit $work_dir/kernel/kernel/.config (the one you've just copied from BBB), find the line CONFIG_LOCALVERSION="<something or empty>" and change it to CONFIG_LOCALVERSION="-$lv", so it will look something like: CONFIG_LOCALVERSION="-bone70"
+@end itemize
+
+@item
+Also, make sure that: CONFIG_USB_G_DBGP=m (If not, make menuconfig, and set @@Device Drivers-> USB Support -> USB Gadget Support -> EHCI Debug Device Gadget=m
+@item
+Build the module:
+@end itemize
+
+@verbatim
+$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- -j4 (is it possoble to build only the gadget modules)
+$ mkdir ../tmp && make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- INSTALL_MOD_PATH=../tmp modules_install
+@end verbatim
+
+@itemize
+@item
+on BBB, backup /lib/modules/3.8.13-bone70/kernel/drivers/usb/gadget (i.e. mv /lib/modules/3.8.13-bone70/kernel/drivers/usb/gadget $HOME)
+@item
+copy the freshly compiled usb/gadget dir to /lib/modules/3.8.13-bone70/kernel/drivers/usb
+@item
+restart BBB
+@item
+Remove all g_* modules (rmmod g_<>)
+@item
+modprobpe g_dbgp
+@end itemize
+
+@node Configure libreboot with EHCI debug
+@subsection Configure libreboot with EHCI debug
+@anchor{#configure-libreboot-with-ehci-debug}
+Libreboot(coreboot) should be configured with debug turned on and to push debug messages to the EHCI debug port.@*If you've downloaded the binary distribution, you can check if it is properly configured in the following way:
+
+@itemize
+@item
+Go to the libreboot dist root directory cd $libreboot_bin
+@item
+Locate the rom image for your target (I will call it: $img_path)
+@item
+Running the following command will extract the config in a file ./my_config:
+@end itemize
+
+@verbatim
+./cbfstool/i686/cbfstool $img_path extract -n config -f ./my_config
+@end verbatim
+
+@itemize
+@item
+Make sure that the following params in the config are set as following:
+@end itemize
+
+@verbatim
+CONFIG_USBDEBUG=y (Generic Drivers -> USB 2.0 EHCI debug dongle support)
+CONFIG_USBDEBUG_IN_ROMSTAGE=y (Generic Drivers -> Enable early (pre-RAM) usbdebug)
+CONFIG_USBDEBUG_HCD_INDEX=<HCD Index of usb controller - see below> (Generic Drivers -> Index for EHCI controller to use with usbdebug)
+CONFIG_USBDEBUG_DEFAULT_PORT=<USB Debug port - see below> (Generic Drivers -> Default USB port to use as Debug Port)
+@end verbatim
+
+The following three are behind radio button in the menu. Only the first one@textsuperscript{@ref{#___fn2,2}} should be = y
+
+@verbatim
+USBDEBUG_DONGLE_STD=y (Generic Drivers -> Type of dongle (Net20DC or compatible) -> Net20DC or compatible)
+CONFIG_USBDEBUG_DONGLE_BEAGLEBONE=n (Generic Drivers -> Type of dongle (Net20DC or compatible) -> BeagleBone)
+CONFIG_USBDEBUG_DONGLE_BEAGLEBONE_BLACK=n (Generic Drivers -> Type of dongle (Net20DC or compatible) -> BeagleBone Black)
+@end verbatim
+
+@textsuperscript{2} The g_dbgp module on BeagleBone Black (Rev. C) reports it self as Net20DC, the other options are for older BB(B) - ver1. This is documented @uref{https://johnlewis.ie/coreboot-ehci-debug-gadget-demonstration/,here} (also tested/verified).
+
+Then:@*
+
+@verbatim
+CONFIG_CONSOLE_USB=y (Console -> USB dongle console output)
+@end verbatim
+
+Also Debugging ---> Output verbose XYZ ) (@strong{FIXME} somebody verify these):
+
+@verbatim
+CONFIG_DEBUG_CBFS=y (Output verbose CBFS debug messages )
+CONFIG_HAVE_DEBUG_RAM_SETUP=y (??? What/where is this)
+CONFIG_DEBUG_RAM_SETUP=y (Output verbose RAM init debug messages)
+CONFIG_DEBUG_SMI=y (Output verbose SMI debug messages)
+CONFIG_DEBUG_ACPI=y (Output verbose ACPI debug messages )
+CONFIG_DEBUG_USBDEBUG=y (Output verbose USB 2.0 EHCI debug dongle messages)
+@end verbatim
+
+If some of the above mentioned configuration options are not as specified, you have to configure and compile libreboot yourself. Please refer to the doc(@strong{FIXME: link} about compiling libreboot.
+@menu
+* Selecting HCD Index and USB Debug port::
+@end menu
+
+@node Selecting HCD Index and USB Debug port
+@subsubsection Selecting HCD Index and USB Debug port
+@anchor{#selecting-hcd-index-and-usb-debug-port}
+This applies (and works) only if the USB controller that supports debug (found in the first section) is from Intel.@*If the PCI ID of the port you found in the first section is 0000:00:1a.0 or 0000:00:1d.0 , you are ok. Otherwise you have to try without guarantee that will work.
+
+If the externally exposed port is on a bus with PCI ID == 0000:00:1a.0 then for CONFIG_USBDEBUG_HCD_INDEX choose 2, otherwise choose 0 .
+
+For CONFIG_USBDEBUG_DEFAULT_PORT choose the port from the first section that correspond to the PCI ID
+
+Notes:@*The above is based on the implementation of coreboot/src/southbridge/intel/common/usb_debug.c : pci_ehci_dbg_dev() .@*This is enough as it applies for the supported GM45/G45 Thinkpads. coreboot support some other contollers too, but they are irellevent for libreboot (for now).
+
+@itemize
+@item
+On T500 (with switchable GPU) the debug ports for both intel controllers is exposed.
+@item
+On x200t the debug ports for both intel controllers is exposed.
+@end itemize
+
+@node How to get the debug logs
+@subsection How to get the debug logs
+@anchor{#how-to-get-the-debug-logs}
+@itemize
+@item
+Plug the USB cable in the target's debug port (the one you found in step 1) and BBB's mini-B USB
+@item
+Make sure no other then g_dbgp of the g_* modules is loaded on your BBB
+@item
+On the BBB:
+@end itemize
+
+@verbatim
+stty -icrnl -inlcr -F /dev/ttyGS0
+cat /dev/ttyGS0
+@end verbatim
+
+@itemize
+@item
+Power on the target with libreboot
+@item
+You should see debug logs comming on your BBB console
+@end itemize
+
+Note that this is not permanent on BBB, if you reboot it, you have to rmmod g_* and modprobe g_dbgp
+
+@node Eneble EHCI Debug on the target's kernel optional recommended
+@subsection Eneble EHCI Debug on the target's kernel (optional, recommended)
+@anchor{#eneble-ehci-debug-on-the-targets-kernel-optional-recommended}
+You have to know how to compile kernel for your target.
+
+@enumerate
+@item
+Check if early debugging is already enabled: grep CONFIG_EARLY_PRINTK_DBGP /boot/config-<ver>
+@item
+If enabled, you do not have to compile the kernel (skip this step). Otherwise, prepare kernel source for your distribution and select (Kernel hacking -> Early printk via EHCI debug port). Compile and install the new kernel.
+@item
+Edit your grub configuration and add following to the kenel parameters@textsuperscript{@ref{#___fn20,20}}@textsuperscript{@ref{#___fn21,21}}: earlyprintk=dbgp,keep. Also, try: earlyprintk=dbgp<N>,keep where N is the debug port id if the first does not work.
+@end enumerate
+
+@node References
+@subsection References
+@anchor{#references}
+@textsuperscript{10} @uref{http://www.coreboot.org/EHCI_Debug_Port,EHCI Debug Port}
+
+@textsuperscript{11} @uref{https://johnlewis.ie/coreboot-ehci-debug-gadget-demonstration/,coreboot EHCI debug gadget demonstration}
+
+@textsuperscript{12} @uref{http://www.coreboot.org/EHCI_Gadget_Debug,EHCI Gadget Debug}
+
+@textsuperscript{13} @uref{http://www.coreboot.org/images/8/88/Ehci-debug-gadget-patches.tar.gz,Ehci-debug-gadget-patches.tar.gz}
+
+@textsuperscript{14} @uref{http://wiki.beyondlogic.org/index.php/BeagleBoneBlack_Building_Kernel,Compiling the BeagleBone Black Kernel}
+
+@textsuperscript{15} http://dumb-looks-free.blogspot.ca/2014/06/beaglebone-black-bbb-compile-kernel.html
+
+@textsuperscript{16} http://dumb-looks-free.blogspot.fr/2014/06/beaglebone-black-bbb-kernal-headers.html
+
+@textsuperscript{17} @uref{http://elinux.org/Building_BBB_Kernel,Building BBB Kernel}
+
+@textsuperscript{18} http://komposter.com.ua/documents/USB-2.0-Debug-Port%28John-Keys%29.pdf
+
+@textsuperscript{19} @uref{http://cs.usfca.edu/~cruse/cs698s10/,Exploring USB at the Hardware/Software Interface}
+
+@textsuperscript{20} https://www.kernel.org/doc/Documentation/x86/earlyprintk.txt
+
+@textsuperscript{21} https://wiki.ubuntu.com/Kernel/Debugging/USBearlyprintk
+
+@strong{TODO}:
+
+@enumerate
+@item
+grub does not send messages to EHCI debug. Investigate.
+@item
+The section “Configure libreboot with EHCI debug” can be skipped/simplified if a common configuration works for all relevant targets is selected as defualt
+@item
+Patch and compule g_dbgp on BBB instead cross-compile
+@item
+Find a simple way to send debug messages from targets userland
+@end enumerate
+
+Copyright © 2015 Alex David <opdecirkel@@gmail.com>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/install/bbb_setup.texi b/docs/src/install/bbb_setup.texi
new file mode 100644
index 0000000..78dc126
--- /dev/null
+++ b/docs/src/install/bbb_setup.texi
@@ -0,0 +1,284 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title How to program an SPI flash chip with the BeagleBone Black
+@end titlepage
+
+@node Top
+@top How to program an SPI flash chip with the BeagleBone Black
+
+@menu
+* How to program an SPI flash chip with the BeagleBone Black::
+* Hardware requirements::
+* Setting up the 33V DC PSU::
+* Accessing the operating system on the BBB::
+* Setting up spidev on the BBB::
+* Connecting the Pomona 5250/5252::
+* Notes about stability::
+@end menu
+
+@node How to program an SPI flash chip with the BeagleBone Black
+@chapter How to program an SPI flash chip with the BeagleBone Black
+@anchor{#how-to-program-an-spi-flash-chip-with-the-beaglebone-black}
+This document exists as a guide for reading from or writing to an SPI flash chip with the BeagleBone Black, using the @uref{http://flashrom.org/Flashrom,flashrom} software. BeagleBone Black rev. C was used when creating this guide, but earlier revisions may also work.
+
+@uref{index.html,Back to previous index}
+
+@node Hardware requirements
+@chapter Hardware requirements
+@anchor{#hardware-requirements}
+Shopping list (pictures of this hardware is shown later):
+
+@itemize
+@item
+External SPI programmer: @strong{BeagleBone Black} (rev. C) is highly recommended. Sometimes referred to as 'BBB'. @uref{http://beagleboard.org/black,This page} contains a list of distributors. farnell sells them - @uref{http://farnell.com/,http://farnell.com/} - If you can't get a BBB, there are other programmers listed on flashrom.org, but not all of them will be suitable for libreboot's purpose. (some may also require blobs. all BBs and BBBs though can be used without blobs). There are also some programmers not listed on flashrom.org, that can also work. A BB (original beaglebone) should work as well, though you might have to replace the distro that it came with.
+@item
+Electrical/insulative tape: cover the entire bottom surface of the BBB (the part that rests on a surface). This is important, when placing the BBB on top of a board so that nothing shorts. - easy to find in most hardware/electronics stores
+@item
+Clip for connecting to the flash chip: if you have a SOIC-16 flash chip (16 pins), you will need the @strong{Pomona 5252} or equivalent. For SOIC-8 flash chips (8 pins), you will need the @strong{Pomona 5250} or equivalent. Do check which chip you have, before ordering a clip. Also, make sure to buy at least two clips (they break easily). - Farnell sells these, and ships to many countries. @uref{http://farnell.com/,http://farnell.com/} - Some people find these difficult to get, especially in South America. If you have more links to suppliers, please contact the libreboot project with the relevant information. - @strong{if you can't get a pomona clip, some other clips might work (eg 3M) but are not always reliable. You can also directly solder the wires to the chip, if that suits you. The clip is just for convenience, really.}
+@item
+@strong{External 3.3V DC power supply}, for powering the flash chip. An ATX power supply / PSU (common on Intel/AMD desktop computers) will work for this. A lab PSU (DC) will also work (adjusted to 3.3V). Etc.
+@itemize
+@item
+Getting a multimeter might be worthwhile, to verify that it's supplying 3.3V
+@end itemize
+
+@item
+@strong{External 5V DC power supply} (barrel connector), for powering the BBB. The BeagleBone can have power supplied via USB, but a dedicated power supply is recommended. These should be easy to find in most places that sell electronics. - @strong{OPTIONAL. Only needed if not powering with the USB cable, or if you want to use @uref{bbb_ehci.html,EHCI debug}}
+@item
+@strong{Pin header / jumper cables} (2.54mm / 0.1" headers) You should get male-male, male-female and female-female cables in 10cm size. Just get a load of them. other possible names for these cables:
+@itemize
+@item
+flying leads
+@item
+dupont (this is just one possible brand name)
+@item
+Often used on breadboards, so they might be called breadboard cables
+@item
+Maybe they are called @strong{wires} instead of cables or leads
+@item
+They are also the same cables used on the GPIOs on the RPi
+@item
+@strong{adafruit.com} sells them, and there are others
+@item
+@strong{Some people find these difficult to buy. Contact the libreboot project if you have more links to sellers.}
+@item
+You might also be able to make these cables yourself.
+@end itemize
+
+For PSU connections, long cables (e.g. 20cm) is fine, and you can extend it longer than that if needed.
+@item
+@strong{Mini USB A-B cable} (the BeagleBone probably already comes with one.) - @strong{OPTIONAL - only needed for @uref{bbb_ehci.html,EHCI debug} or for serial/ssh access without ethernet cable (g_multi kernel module)}
+@item
+@strong{FTDI TTL cable or debug board}, for accessing the serial console on your BBB. @uref{http://elinux.org/Beagleboard:BeagleBone_Black_Serial,This page} contains a list. - @strong{OPTIONAL - only needed for serial console on the BBB, if not using SSH via ethernet cable}
+@end itemize
+
+@ref{#pagetop,Back to top of page.}
+
+@node Setting up the 33V DC PSU
+@chapter Setting up the 3.3V DC PSU
+@anchor{#setting-up-the-3.3v-dc-psu}
+ATX PSU pinouts are on @uref{https://en.wikipedia.org/wiki/Power_supply_unit_%28computer%29#Wiring_diagrams,wikipedia}
+
+You can use pin 1 or 2 (orange wire) on a 20-pin or 24-pin ATX PSU for 3.3V, and any of the ground/earth sources (black cables) for ground. Short PS_ON# / Power on (green wire. pin 16 on 24-pin ATX PSU, or pin 14 on a 20-pin ATX PSU) to a ground (black. there is one right next to it) using a wire/paperclip/jumper then power on the PSU by grounding PS_ON# (this is also how an ATX motherboard turns on a PSU).
+
+@strong{DO **NOT** use pin 4, 6, do **NOT** use pin 19 or 20 (on a 20-pin ATX PSU), and DO **NOT** use pin 21, 22 or 23 (on a 24-pin ATX PSU). Those wires (the red ones) are 5V, and they **WILL** kill your flash chip. ***NEVER*** supply more than 3.3V to your flash chip. (that is, if it's a 3.3V flash chip. 5V and 1.8V SPI flash chips do exist, but they are rare. always check what voltage your chip takes. most take 3.3V)}
+
+You only need one 3.3V supply and one ground for the flash chip, after grounding PS_ON#.
+
+The male end of a 0.1" or 2.54mm header cable is not thick enough to remain permanently connected to the ATX PSU on its own. When connecting header cables to the connector on the ATX PSU, use a female end attached to a thicker piece of wire (you could use a paper clip), or wedge the male end of the jumper cable into the sides of the hole in the connector, instead of going through the centre.
+
+Here is an example set up:@* @image{../resources/images/x200/psu33,,,,jpg}
+
+@node Accessing the operating system on the BBB
+@chapter Accessing the operating system on the BBB
+@anchor{#accessing-the-operating-system-on-the-bbb}
+The operating system on your BBB will probably have an SSH daemon running where the root account has no password. Use SSH to access the operating system and set a root password. By default, the OS on your BBB will most likely use DHCP, so it should already have an IP address.
+
+You will also be using the OS on your BBB for programming an SPI flash chip.
+@menu
+* Alternatives to SSH in case SSH fails::
+@end menu
+
+@node Alternatives to SSH in case SSH fails
+@section Alternatives to SSH (in case SSH fails)
+@anchor{#alternatives-to-ssh-in-case-ssh-fails}
+You can also use a serial FTDI debug board with GNU Screen, to access the serial console.@* # @strong{screen /dev/ttyUSB0 115200}@* Here are some example photos:@* @image{../resources/images/x200/ftdi,,,,jpg} @image{../resources/images/x200/ftdi_port,,,,jpg}@*
+
+You can also connect the USB cable from the BBB to another computer and a new network interface will appear, with its own IP address. This is directly accessible from SSH, or screen:@* # @strong{screen /dev/ttyACM0 115200}
+
+You can also access the uboot console, using the serial method instead of SSH.
+
+@node Setting up spidev on the BBB
+@chapter Setting up spidev on the BBB
+@anchor{#setting-up-spidev-on-the-bbb}
+Log on as root on the BBB, using either SSH or a serial console as defined in @ref{#bbb_access,#bbb_access}. Make sure that you have internet access on your BBB.
+
+Follow the instructions at @uref{http://elinux.org/BeagleBone_Black_Enable_SPIDEV#SPI0,http://elinux.org/BeagleBone_Black_Enable_SPIDEV#SPI0} up to (and excluding) the point where it tells you to modify uEnv.txt
+
+You need to update the software on the BBB first. If you have an element14 brand BBB (sold by Premier Farnell plc. stores like Farnell element14, Newark element14, and Embest), you may need to @uref{https://groups.google.com/forum/?_escaped_fragment_=msg/beagleboard/LPjCn4LEY2I/alozBGsbTJMJ#!msg/beagleboard/LPjCn4LEY2I/alozBGsbTJMJ,work around a bug} in the LED aging init script before you can update your software. If you don't have a file named /etc/init.d/led_aging.sh, you can skip this step and update your software as described below. Otherwise, replace the contents of this file with:
+
+@verbatim
+#!/bin/sh -e
+### BEGIN INIT INFO
+# Provides: led_aging.sh
+# Required-Start: $local_fs
+# Required-Stop: $local_fs
+# Default-Start: 2 3 4 5
+# Default-Stop: 0 1 6
+# Short-Description: Start LED aging
+# Description: Starts LED aging (whatever that is)
+### END INIT INFO
+
+x=$(/bin/ps -ef | /bin/grep "[l]ed_acc")
+if [ ! -n "$x" -a -x /usr/bin/led_acc ]; then
+ /usr/bin/led_acc &
+fi
+@end verbatim
+
+Run @strong{apt-get update} and @strong{apt-get upgrade} then reboot the BBB, before continuing.
+
+Check that the firmware exists:@* # @strong{ls /lib/firmware/BB-SPI0-01-00A0.*}@* Output:
+
+@verbatim
+/lib/firmware/BB-SPI0-01-00A0.dtbo
+@end verbatim
+
+Then:@* # @strong{echo BB-SPI0-01 > /sys/devices/bone_capemgr.*/slots}@* # @strong{cat /sys/devices/bone_capemgr.*/slots}@* Output:
+
+@verbatim
+ 0: 54:PF---
+ 1: 55:PF---
+ 2: 56:PF---
+ 3: 57:PF---
+ 4: ff:P-O-L Bone-LT-eMMC-2G,00A0,Texas Instrument,BB-BONE-EMMC-2G
+ 5: ff:P-O-L Bone-Black-HDMI,00A0,Texas Instrument,BB-BONELT-HDMI
+ 7: ff:P-O-L Override Board Name,00A0,Override Manuf,BB-SPI0-01
+@end verbatim
+
+Verify that the spidev device now exists:@* # @strong{ls -al /dev/spid*}@* Output:
+
+@verbatim
+crw-rw---T 1 root spi 153, 0 Nov 19 21:07 /dev/spidev1.0
+@end verbatim
+
+Now the BBB is ready to be used for flashing. Make this persist across reboots:@* In /etc/default/capemgr add @strong{CAPE=BB-SPI0-01} at the end (or change the existing @strong{CAPE=} entry to say that, if an entry already exists.
+
+Get flashrom from the libreboot_util release archive, or build it from libreboot_src/git if you need to. An ARM binary (statically compiled) for flashrom exists in libreboot_util releases. Put the flashrom binary on your BBB.
+
+You may also need ich9gen, if you will be flashing an ICH9-M laptop (such as the X200). Get it from libreboot_util, or build it from libreboot_src, and put the ARM binary for it on your BBB.
+
+Finally, get the ROM image that you would like to flash and put that on your BBB.
+
+Now test flashrom:@* # @strong{./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512}@* Output:
+
+@verbatim
+Calibrating delay loop... OK.
+No EEPROM/flash device found.
+Note: flashrom can never write if the flash chip isn't found automatically.
+@end verbatim
+
+This means that it's working (the clip isn't connected to any flash chip, so the error is fine).
+
+@node Connecting the Pomona 5250/5252
+@chapter Connecting the Pomona 5250/5252
+@anchor{#connecting-the-pomona-52505252}
+Use this image for reference when connecting the pomona to the BBB: @uref{http://beagleboard.org/Support/bone101#headers,http://beagleboard.org/Support/bone101#headers} (D0 = MISO or connects to MISO).
+
+The following shows how to connect clip to the BBB (on the P9 header), for SOIC-16 (clip: Pomona 5252):
+
+@verbatim
+ NC - - 21
+ 1 - - 17
+ NC - - NC
+ NC - - NC
+ NC - - NC
+ NC - - NC
+ 18 - - 3.3V (PSU)
+ 22 - - NC - this is pin 1 on the flash chip
+This is how you will connect. Numbers refer to pin numbers on the BBB, on the plugs near the DC jack.
+
+You may also need to connect pins 1 and 9 (tie to 3.3V supply). These are HOLD# and WP#.
+On some systems they are held high, if the flash chip is attached to the board.
+If you're flashing a chip that isn't connected to a board, you'll almost certainly
+have to connect them.
+
+SOIC16 pinout (more info available online, or in the datasheet for your flash chip):
+HOLD 1-16 SCK
+VDD 2-15 MOSI
+N/C 3-14 N/C
+N/C 4-13 N/C
+N/C 5-12 N/C
+N/C 6-11 N/C
+SS 7-10 GND
+MISO 8-9 WP
+@end verbatim
+
+The following shows how to connect clip to the BBB (on the P9 header), for SOIC-8 (clip: Pomona 5250):
+
+@verbatim
+ 18 - - 1
+ 22 - - NC
+ NC - - 21
+ 3.3V (PSU) - - 17 - this is pin 1 on the flash chip
+This is how you will connect. Numbers refer to pin numbers on the BBB, on the plugs near the DC jack.
+
+You may also need to connect pins 3 and 7 (tie to 3.3V supply). These are HOLD# and WP#.
+On some systems they are held high, if the flash chip is attached to the board.
+If you're flashing a chip that isn't connected to a board, you'll almost certainly
+have to connect them.
+
+SOIC8 pinout (more info available online, or in the datasheet for your flash chip):
+SS 1-8 VDD
+MISO 2-7 HOLD
+WP 3-6 SCK
+GND 4-5 MOSI
+@end verbatim
+
+@strong{NC = no connection}
+
+@strong{DO NOT connect 3.3V (PSU) yet. ONLY connect this once the pomona is connected to the flash chip.}
+
+@strong{You also need to connect the BLACK wire (ground/earth) from the 3.3V PSU to pin 2 on the BBB (P9 header). It is safe to install this now (that is, before you connect the pomona to the flash chip); in fact, you should.}
+
+if you need to extend the 3.3v psu leads, just use the same colour M-F leads, @strong{but} keep all other leads short (10cm or less)
+
+You should now have something that looks like this:@* @image{../resources/images/x200/5252_bbb0,,,,jpg} @image{../resources/images/x200/5252_bbb1,,,,jpg}
+
+@ref{#pagetop,Back to top of page.}
+
+@node Notes about stability
+@chapter Notes about stability
+@anchor{#notes-about-stability}
+@uref{http://flashrom.org/ISP,http://flashrom.org/ISP} is what we typically do in libreboot, though not always. That page has some notes about using resistors to affect stability. Currently, we use spispeed=512 (512kHz) but it is possible to use higher speeds while maintaining stability.
+
+tty0_ in #libreboot was able to get better flashing speeds with the following configuration:
+
+@itemize
+@item
+"coax" with 0.1 mm core and aluminum foley (from my kitchen), add 100 Ohm resistors (serial)
+@item
+put heatshrink above the foley, for: CS, CLK, D0, D1
+@item
+Twisted pair used as core (in case more capacitors are needed)
+@item
+See this image: @uref{http://i.imgur.com/qHGxKpj.jpg,http://i.imgur.com/qHGxKpj.jpg}
+@item
+He was able to flash at 50MHz (lower speeds are also fine).
+@end itemize
+
+Copyright © 2014, 2015 Francis Rowe <info@@gluglug.org.uk>@* Copyright © 2015 Patrick "P. J." McDermott <pj@@pehjota.net>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/install/c201.texi b/docs/src/install/c201.texi
new file mode 100644
index 0000000..9ea5feb
--- /dev/null
+++ b/docs/src/install/c201.texi
@@ -0,0 +1,163 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title ASUS Chromebook C201 installation guide
+@end titlepage
+
+@node Top
+@top ASUS Chromebook C201 installation guide
+
+@menu
+* ASUS Chromebook C201 installation guide::
+* Installing Libreboot to the SPI flash::
+@end menu
+
+@node ASUS Chromebook C201 installation guide
+@chapter ASUS Chromebook C201 installation guide
+@anchor{#asus-chromebook-c201-installation-guide}
+These instructions are for installing Libreboot to the ASUS Chromebook C201. Since the device ships with Coreboot, the installation instructions are the same before and after flashing Libreboot for the first time.
+
+@strong{If you are using libreboot_src or git, then make sure that you built the sources first (see @uref{../git/index.html#build,../git/index.html#build}).}
+
+Look at the @ref{#rom,list of ROM images} to see which image is compatible with your device.
+
+Libreboot can be installed internally from the device, with sufficient privileges. The installation process requires using @strong{Google's modified version of flashrom}, that has support for reflashing the Chromebook's SPI flash. Otherwise, flashing externally will work with the upstream flashrom version.
+
+@strong{Google's modified version of flashrom} is free software and its source code is made available by Google: @uref{https://chromium.googlesource.com/chromiumos/third_party/flashrom/,flashrom}.@* It is not distributed along with Libreboot yet. However, it is preinstalled on the device, with ChromeOS.
+
+Installing Libreboot internally requires sufficient privileges on the system installed on the device.@* When the device has ChromeOS installed (as it does initially), it is necessary to gain root privileges in ChromeOS, to be able to access a root shell.
+
+@itemize
+@item
+@ref{#root_chromeos,Gaining root privileges on ChromeOS}
+@item
+@ref{#preparing_device,Preparing the device for the installation}
+@itemize
+@item
+@ref{#configuring_verified_boot_parameters,Configuring verified boot parameters}
+@item
+@ref{#removing_write_protect_screw,Removing the write protect screw}
+@end itemize
+
+@item
+@uref{,Installing Libreboot to the SPI flash}
+@itemize
+@item
+@ref{#installing_libreboot_internally,Installing Libreboot internally, from the device}
+@item
+@ref{#installing_libreboot_externally,Installing Libreboot externally, with a SPI flash programmer}
+@end itemize
+
+@end itemize
+
+@uref{../index.html,Back to main index}
+
+Gaining root privileges on ChromeOS
+
+In order to gain root privileges on ChromeOS, developer mode has to be enabled from the recovery mode screen and debugging features have to be enabled in ChromeOS.
+
+Instructions to access the @uref{../depthcharge/index.html#recovery_mode_screen,recovery mode screen} and @uref{../depthcharge/index.html#enabling_developer_mode,enabling developer mode} are available on the page dedicated to @uref{../depthcharge/index.html,depthcharge}.
+
+Once developer mode is enabled, the device will boot to the @uref{../depthcharge/index.html#developer_mode_screen,developer mode screen}. ChromeOS can be booted by waiting for 30 seconds (the delay is shortened in Libreboot) or by pressing @strong{Ctrl + D}
+
+After the system has booted, root access can be enabled by clicking on the @strong{Enable debugging features} link. A confirmation dialog will ask whether to proceed.@* After confirming by clicking @strong{Proceed}, the device will reboot and ask for the root password to set. Finally, the operation has to be confirmed by clicking @strong{Enable}.
+
+After setting the root password, it becomes possible to log-in as root. A tty prompt can be obtained by pressing @strong{Ctrl}+@strong{Alt}+@strong{Previous}. The @strong{Previous} key is the one on the top left of the keyboard.
+
+Preparing the device for the installation
+
+Before installing Libreboot on the device, both its software and hardware has to be prepared to allow the installation procedure and to ensure that security features don't get in the way.
+@menu
+* Configuring verified boot parameters::
+* Removing the write protect screw::
+@end menu
+
+@node Configuring verified boot parameters
+@section Configuring verified boot parameters
+@anchor{#configuring-verified-boot-parameters}
+It is recommended to have access to the @uref{../depthcharge/index.html#developer_mode_screen,developer mode screen} and to @uref{../depthcharge/index.html#configuring_verified_boot_parameters,configure the following verified boot parameters}:
+
+@itemize
+@item
+Kernels signature verification: @emph{disabled}
+@item
+External media boot: @emph{enabled}
+@end itemize
+
+Those changes can be reverted later, when the device is known to be in a working state.
+
+@node Removing the write protect screw
+@section Removing the write protect screw
+@anchor{#removing-the-write-protect-screw}
+Since part of the SPI flash is write-protected by a screw, it is necessary to remove the screw to remove the write protection and allow writing Libreboot to the @emph{read-only} part of the flash.
+
+To access the screw, the device has to be opened. There are 7 screws to remove from the bottom of the device, as shown on the picture below. One is hidden under the top right pad. After removing the screws, the keyboard plastic part can be carefully detached from the rest. @strong{Beware: there are cables attached to it!} It is advised to flip the keyboard plastic part over, as shown on the picture below. The write protect screw is located next to the SPI flash chip, circled in red in the picture below. It has to be removed.
+
+@uref{../resources/images/c201/screws.jpg,@image{../resources/images/c201/screws,,,Screws,jpg}} @uref{../resources/images/c201/wp-screw.jpg,@image{../resources/images/c201/wp-screw,,,WP screw,jpg}}
+
+The write protect screw can be put back in place later, when the device is known to be in a working state.
+
+@node Installing Libreboot to the SPI flash
+@chapter Installing Libreboot to the SPI flash
+@anchor{#installing-libreboot-to-the-spi-flash}
+The SPI flash (that holds Libreboot) is divided into various partitions that are used to implement parts of the CrOS security system. Libreboot is installed in the @emph{read-only} coreboot partition, that becomes writable after removing the write-protect screw.
+@menu
+* Installing Libreboot internally from the device::
+* Installing Libreboot externally with a SPI flash programmer::
+@end menu
+
+@node Installing Libreboot internally from the device
+@section Installing Libreboot internally, from the device
+@anchor{#installing-libreboot-internally-from-the-device}
+Before installing Libreboot to the SPI flash internally, the device has to be reassembled.
+
+All the files from the @strong{veyron_speedy} release (or build) have to be transferred to the device.
+
+The SPI flash has to be read first:@* # @strong{flashrom -p host -r flash.img}@* @strong{Note: it might be a good idea to copy the produced flash.img file at this point and store it outside of the device for backup purposes.}
+
+Then, the @strong{cros-flash-replace} script has to be executed as such:@* # @strong{./cros-firmware-replace flash.img coreboot ro-frid}@* If any error is shown, it is definitely a bad idea to go further than this point.
+
+The resulting flash image can then be flashed back:@* # @strong{flashrom -p host -w flash.img}@*
+
+You should also see within the output the following:@* @strong{"Verifying flash... VERIFIED."}
+
+Shut down. The device will now boot to Libreboot.
+
+@node Installing Libreboot externally with a SPI flash programmer
+@section Installing Libreboot externally, with a SPI flash programmer
+@anchor{#installing-libreboot-externally-with-a-spi-flash-programmer}
+Before installing Libreboot to the SPI flash internally, the device has to be opened.
+
+The SPI flash is located next to the write protect screw. Its layout is indicated in the picture below. Note that it is not necessary to connect @strong{WP#} since removing the screw already connects it to ground. Before writing to the chip externally, the battery connector has to be detached. It is located under the heat spreader, that has to be unscrewed from the rest of the case. The battery connector is located on the right and has colorful cables, as shown on the picture below.
+
+@uref{../resources/images/c201/spi-flash-layout.jpg,@image{../resources/images/c201/spi-flash-layout,,,SPI flash layout,jpg}} @uref{../resources/images/c201/battery-connector.jpg,@image{../resources/images/c201/battery-connector,,,Battery connector,jpg}}
+
+All the files from the @strong{veyron_speedy} release (or build) have to be transferred to the host.
+
+The SPI flash has to be read first (using the right spi programmer):@* # @strong{flashrom -p @emph{programmer} -r flash.img}@* @strong{Note: it might be a good idea to copy the produced flash.img file at this point and store it outside of the device for backup purposes.}
+
+Then, the @strong{cros-flash-replace} script has to be executed as such:@* # @strong{./cros-firmware-replace flash.img coreboot ro-frid}@* If any error is shown, it is definitely a bad idea to go further than this point.
+
+The resulting flash image can then be flashed back (using the right spi programmer):@* # @strong{flashrom -p @emph{programmer} -w flash.img}@*
+
+You should also see within the output the following:@* @strong{"Verifying flash... VERIFIED."}
+
+The device will now boot to Libreboot.
+
+@ref{#pagetop,Back to top of page.}
+
+Copyright © 2015 Paul Kocialkowski <contact@@paulk.fr>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/install/index.texi b/docs/src/install/index.texi
new file mode 100644
index 0000000..8ca7e39
--- /dev/null
+++ b/docs/src/install/index.texi
@@ -0,0 +1,274 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title Installing libreboot
+@end titlepage
+
+@node Top
+@top Installing libreboot
+
+@menu
+* Installing libreboot::
+* List of ROM images in libreboot::
+* How to update or install libreboot if you are already running libreboot or coreboot::
+* ThinkPad X60/T60 Initial installation guide if running the proprietary firmware::
+* MacBook21 Initial installation guide if running the proprietary firmware::
+@end menu
+
+@node Installing libreboot
+@chapter Installing libreboot
+@anchor{#installing-libreboot}
+This section relates to installing libreboot on supported targets.
+
+@uref{../index.html,Back to previous index}
+@menu
+* Software methods::
+* Hardware methods::
+@end menu
+
+@node Software methods
+@section Software methods
+@anchor{#software-methods}
+@itemize
+@item
+@ref{#rom,List of ROM images in libreboot}
+@item
+@ref{#flashrom,How to update or install libreboot (if you are already running libreboot or coreboot)}
+@item
+@ref{#flashrom,KFSN4-DRE: initial installation guide (if running the proprietary firmware or libreboot)}
+@item
+@ref{#flashrom_lenovobios,ThinkPad X60/T60: Initial installation guide (if running the proprietary firmware)}
+@item
+@ref{#flashrom_macbook21,MacBook2,1: Initial installation guide (if running the proprietary firmware)}
+@item
+@uref{c201.html,ASUS Chromebook C201 installation guide} (Installing Libreboot internally, from the device)
+@end itemize
+
+@node Hardware methods
+@section Hardware methods
+@anchor{#hardware-methods}
+@itemize
+@item
+@uref{bbb_setup.html,How to program an SPI flash chip with the BeagleBone Black}
+@item
+@uref{bbb_ehci.html,How to configure EHCI debugging on the BeagleBone Black}
+@item
+@uref{kgpe-d16.html,KGPE-D16 (needed if running the proprietary firmware, or to unbrick)}
+@item
+@uref{x60_unbrick.html,ThinkPad X60: Recovery guide}
+@item
+@uref{x60tablet_unbrick.html,ThinkPad X60 Tablet: Recovery guide}
+@item
+@uref{t60_unbrick.html,ThinkPad T60: Recovery guide}
+@item
+@uref{x200_external.html,ThinkPad X200/X200S/X200T (needed if running the proprietary firmware, or to unbrick)}
+@item
+@uref{r400_external.html,ThinkPad R400 (needed if running the proprietary firmware, or to unbrick)}
+@item
+@uref{r500_external.html,ThinkPad R500 (needed if running the proprietary firmware, or to unbrick)}
+@item
+@uref{t400_external.html,ThinkPad T400 (needed if running the proprietary firmware, or to unbrick)}
+@item
+@uref{t500_external.html,ThinkPad T500 (needed if running the proprietary firmware, or to unbrick)}
+@item
+@uref{c201.html,ASUS Chromebook C201 installation guide} (Installing Libreboot externally, with a SPI flash programmer)
+@end itemize
+
+@node List of ROM images in libreboot
+@chapter List of ROM images in libreboot
+@anchor{#list-of-rom-images-in-libreboot}
+Libreboot distributes pre-compiled ROM images, built from the libreboot source code. These images are provided for user convenience, so that they don't have to build anything from source on their own.
+
+The ROM images in each archive use the following at the end of the file name, if they are built with the GRUB payload: @strong{_@emph{keymap}_@emph{mode}.rom}
+
+Available @emph{modes}: @strong{vesafb} or @strong{txtmode}. The @emph{vesafb} ROM images are recommended, in most cases; @emph{txtmode} ROM images come with MemTest86+, which requires text-mode instead of the usual framebuffer used by coreboot native graphics initialization.
+
+@emph{keymap} can be one of several keymaps that keyboard supports (there are quite a few), which affects the keyboard layout configuration that is used in GRUB. It doesn't matter which ROM image you choose here, as far as the keymap in GNU/Linux is concerned.
+
+Keymaps are named appropriately according to each keyboard layout support in GRUB. To learn how these keymaps are created, see @uref{../grub/index.html#grub_keyboard,../grub/index.html#grub_keyboard}
+@menu
+* QEMU::
+@end menu
+
+@node QEMU
+@section QEMU
+@anchor{#qemu}
+Libreboot comes with ROM images built for QEMU, by default:
+
+Examples of how to use libreboot ROM images in QEMU:
+
+@itemize
+@item
+$ @strong{qemu-system-i386 -M q35 -m 512 -bios qemu_q35_ich9_keymap_mode.rom}
+@item
+$ @strong{qemu-system-i386 -M pc -m 512 -bios qemu_i440fx_piix4_keymap_mode.rom}
+@end itemize
+
+You can optionally specify the @strong{-serial stdio} argument, so that QEMU will emulate a serial terminal on the standard input/output (most likely your terminal emulator or TTY).
+
+Other arguments are available for QEMU. The manual will contain more information.
+
+@ref{#pagetop,Back to top of page.}
+
+@node How to update or install libreboot if you are already running libreboot or coreboot
+@chapter How to update or install libreboot (if you are already running libreboot or coreboot)
+@anchor{#how-to-update-or-install-libreboot-if-you-are-already-running-libreboot-or-coreboot}
+On all current targets, updating libreboot can be accomplished without disassembly and, therefore, without having to externally re-flash using any dedicated hardware. In other words, you can do everything entirely in software, directly from the OS that is running on your libreboot system.
+
+@strong{If you are using libreboot_src or git, then make sure that you built the sources first (see @uref{../git/index.html#build,../git/index.html#build}).}
+
+Look at the @ref{#rom,list of ROM images} to see which image is compatible with your device.
+@menu
+* Are you currently running the original proprietary firmware?::
+* ASUS KFSN4-DRE?::
+* ASUS KGPE-D16?::
+* Are you currently running libreboot or coreboot?::
+* MAC address on GM45 X200/R400/T400/T500::
+* Flash chip size::
+* All good?::
+@end menu
+
+@node Are you currently running the original proprietary firmware?
+@section Are you currently running the original, proprietary firmware?
+@anchor{#are-you-currently-running-the-original-proprietary-firmware}
+If you are currently running the proprietary firmware (not libreboot or coreboot), then the flashing instructions for your system are going to be different.
+
+X60/T60 users running the proprietary firmware should refer to @ref{#flashrom_lenovobios,#flashrom_lenovobios}. MacBook2,1 users running Apple EFI should refer to @ref{#flashrom_macbook21,#flashrom_macbook21}
+
+X200 users, refer to @uref{x200_external.html,x200_external.html}, R400 users refer to @uref{r400_external.html,r400_external.html}, R500 users refer to @uref{r500_external.html,r500_external.html}, T400 users refer to @uref{t400_external.html,t400_external.html}, T500 users refer to @uref{t500_external.html,t500_external.html}
+
+@node ASUS KFSN4-DRE?
+@section ASUS KFSN4-DRE?
+@anchor{#asus-kfsn4-dre}
+Internal flashing should work just fine, even if you are currently booting the proprietary firmware.
+
+Libreboot currently lacks documentation for externally re-flashing an LPC flash chip. However, these boards have the flash chip inside of a PLCC socket, and it is possible to hot-swap the chips. If you want to back up your known-working image, simply hot-swap the chip for one that is the same capacity, after having dumped a copy of the current firmware (flashrom -p internal -r yourchosenname.rom), and then flash that chip with the known-working image. Check whether the system still boots, and if it does, then it should be safe to flash the new image (because you now have a backup of the old image).
+
+Keeping at least one spare LPC PLCC chip with working firmware on it is highly recommended, in case of bricks.
+
+@strong{DO NOT hot-swap the chip with your bare hands. Use a PLCC chip extractor. These can be found online. See @uref{http://www.coreboot.org/Developer_Manual/Tools#Chip_removal_tools,http://www.coreboot.org/Developer_Manual/Tools#Chip_removal_tools}}
+
+Do check the HCL entry: @uref{../hcl/kfsn4-dre.html,../hcl/kfsn4-dre.html}
+
+@node ASUS KGPE-D16?
+@section ASUS KGPE-D16?
+@anchor{#asus-kgpe-d16}
+If you have the proprietary BIOS, you need to flash libreboot externally. See @uref{kgpe-d16.html,kgpe-d16.html}.
+
+If you already have coreboot or libreboot installed, without write protection on the flash chip, then you can do it in software (otherwise, see link above).
+
+@strong{DO NOT hot-swap the chip with your bare hands. Use a PDIP-8 chip extractor. These can be found online. See @uref{http://www.coreboot.org/Developer_Manual/Tools#Chip_removal_tools,http://www.coreboot.org/Developer_Manual/Tools#Chip_removal_tools}}
+
+Do check the HCL entry: @uref{../hcl/kgpe-d16.html,../hcl/kgpe-d16.html}
+
+@node Are you currently running libreboot or coreboot?
+@section Are you currently running libreboot (or coreboot)?
+@anchor{#are-you-currently-running-libreboot-or-coreboot}
+X60/T60 users should be fine with this guide. If you write-protected the flash chip, please refer to @uref{x60_unbrick.html,x60_unbrick.html}, @uref{x60tablet_unbrick.html,x60tablet_unbrick.html} or @uref{t60_unbrick.html,t60_unbrick.html}. @emph{This probably does not apply to you. Most people do not write-protect the flash chip, so you probably didn't either.}
+
+Similarly, it is possible to write-protect the flash chip in coreboot or libreboot on GM45 laptops (X200/R400/R500/T400/T500). If you did this, then you will need to use the links above for flashing, treating your laptop as though it currently has the proprietary firmware (because write-protected SPI flash requires external re-flashing, as is also the case when running the proprietary firmware).
+
+If you did not write-protect the flash chip, or it came to you without any write-protection (@strong{@emph{libreboot does not write-protect the flash chip by default, so this probably applies to you}}), read on!
+
+@node MAC address on GM45 X200/R400/T400/T500
+@section MAC address on GM45 (X200/R400/T400/T500)
+@anchor{#mac-address-on-gm45-x200r400t400t500}
+@strong{Users of the X200/R400/T400/T500 take note:} The MAC address for the onboard ethernet chipset is located inside the flash chip. Libreboot ROM images for these laptops contain a generic MAC address by default (00:F5:F0:40:71:FE), but this is not what you want. @emph{Make sure to change the MAC address inside the ROM image, before flashing it. The instructions on @uref{../hcl/gm45_remove_me.html#ich9gen,../hcl/gm45_remove_me.html#ich9gen} show how to do this.}
+
+It is important that you change the default MAC address, before flashing. It will be printed on a sticker at the bottom of the laptop, or it will be printed on a sticker next to or underneath the RAM. Alternatively, and assuming that your current firmware has the correct MAC address in it, you can get it from your OS.
+
+@strong{R500 users: your laptop lacks a GbE region, because it has a different NIC. You do not need to change the MAC address on this laptop; it will already be correct. You can simply flash the available ROM images for the R500, as-is. See @uref{../hcl/r500.html#nogbe,../hcl/r500.html#nogbe}.}
+
+@node Flash chip size
+@section Flash chip size
+@anchor{#flash-chip-size}
+Use this to find out:@* # @strong{dmidecode | grep ROM\ Size}
+
+@node All good?
+@section All good?
+@anchor{#all-good}
+Excellent! Moving on...
+
+Download the @emph{libreboot_util.tar.xz} archive, and extract it. Inside, you will find a directory called @emph{flashrom}. This contains statically compiled executable files of the @emph{flashrom} utility, which you will use to re-flash your libreboot system.
+
+Simply use @emph{cd} on your terminal, to switch to the @emph{libreboot_util} directory. Inside, there is a script called @emph{flash}, which will detect what CPU architecture you have (e.g. i686, x86_64) and use the appropriate executable. It is also possible for you to build these executables from the libreboot source code archives.
+
+How to update the flash chip contents:@* $ @strong{sudo ./flash update @ref{#rom,yourrom.rom}}
+
+Ocassionally, coreboot changes the name of a given board. If flashrom complains about a board mismatch, but you are sure that you chose the correct ROM image, then run this alternative command:@* $ @strong{sudo ./flash forceupdate @ref{#rom,yourrom.rom}}
+
+You should see @strong{"Verifying flash... VERIFIED."} written at the end of the flashrom output. @strong{Shut down} after you see this, and then boot up again after a few seconds.
+
+@ref{#pagetop,Back to top of page}
+
+@node ThinkPad X60/T60 Initial installation guide if running the proprietary firmware
+@chapter ThinkPad X60/T60: Initial installation guide (if running the proprietary firmware)
+@anchor{#thinkpad-x60t60-initial-installation-guide-if-running-the-proprietary-firmware}
+@strong{This is for the ThinkPad X60 and T60 while running Lenovo BIOS. If you already have coreboot or libreboot running, then go to @ref{#flashrom,#flashrom} instead!}
+
+@strong{If you are flashing a Lenovo ThinkPad T60, be sure to read @uref{../hcl/index.html#supported_t60_list,../hcl/index.html#supported_t60_list}}
+
+@strong{If you are using libreboot_src or git, then make sure that you built the sources first (see @uref{../git/index.html#build,../git/index.html#build}).}
+
+@strong{Warning: this guide will not instruct the user how to backup the original Lenovo BIOS firmware. These backups are tied to each system, and will not work on any other. For that, please refer to @uref{http://www.coreboot.org/Board:lenovo/x60/Installation,http://www.coreboot.org/Board:lenovo/x60/Installation}.}
+
+@strong{If you're using libreboot 20150518, note that there is a mistake in the flashing script. Apply this patch to the BASH script named @emph{flash} (this is the script for flashing libreboot into your X60): @uref{../resources/misc/patch/x60flashscript.patch,x60flashscript.patch}. This patch is merged in the main git repository, and in all releases after 20150518.}
+
+The first half of the procedure is as follows:@* $ @strong{sudo ./flash i945lenovo_firstflash @ref{#rom,yourrom.rom}.}
+
+You should see within the output the following:@* @strong{"Updated BUC.TS=1 - 64kb address ranges at 0xFFFE0000 and 0xFFFF0000 are swapped"}.
+
+You should also see within the output the following:@* @strong{"Your flash chip is in an unknown state"}, @strong{"FAILED"} and @strong{"DO NOT REBOOT OR POWEROFF"}@* Seeing this means that the operation was a @strong{resounding} success! @strong{DON'T PANIC}.
+
+See this link for more details: @uref{http://thread.gmane.org/gmane.linux.bios.flashrom/575,http://thread.gmane.org/gmane.linux.bios.flashrom/575}.
+
+If the above is what you see, then @strong{SHUT DOWN}. Wait a few seconds, and then boot; libreboot is running, but there is a 2nd procedure @strong{*needed*} (see below).
+
+When you have booted up again, you must also do this:@* $ @strong{sudo ./flash i945lenovo_secondflash @ref{#rom,yourrom.rom}}
+
+If flashing fails at this stage, try the following:@* $ @strong{sudo ./flashrom/i686/flashrom -p internal:laptop=force_I_want_a_brick -w @ref{#rom,yourrom.rom}}
+
+You should see within the output the following:@* @strong{"Updated BUC.TS=0 - 128kb address range 0xFFFE0000-0xFFFFFFFF is untranslated"}
+
+You should also see within the output the following:@* @strong{"Verifying flash... VERIFIED."}
+
+@ref{#pagetop,Back to top of page.}
+
+@node MacBook21 Initial installation guide if running the proprietary firmware
+@chapter MacBook2,1: Initial installation guide (if running the proprietary firmware)
+@anchor{#macbook21-initial-installation-guide-if-running-the-proprietary-firmware}
+@strong{If you have a MacBook1,1, refer to @uref{../hcl/index.html#macbook11,../hcl/index.html#macbook11} for flashing instructions.}
+
+@strong{This is for the MacBook2,1 while running Apple EFI firmware. If you already have coreboot or libreboot running, then go to @ref{#flashrom,#flashrom} instead!}
+
+Be sure to read the information in @uref{../hcl/index.html#macbook21,../hcl/index.html#macbook21}.
+
+@strong{Warning: this guide will not instruct the user how to backup the original Apple EFI firmware. For that, please refer to @uref{http://www.coreboot.org/Board:apple/macbook21,http://www.coreboot.org/Board:apple/macbook21}.}
+
+@strong{If you are using libreboot_src or git, then make sure that you built the sources first (see @uref{../git/index.html#build,../git/index.html#build}).}
+
+Look at the @ref{#rom,list of ROM images} to see which image is compatible with your device.
+
+Use this flashing script, to install libreboot:@* $ @strong{sudo ./flash i945apple_firstflash @ref{#rom,yourrom.rom}}
+
+You should also see within the output the following:@* @strong{"Verifying flash... VERIFIED."}
+
+Shut down.
+
+@ref{#pagetop,Back to top of page.}
+
+Copyright © 2014, 2015 Francis Rowe <info@@gluglug.org.uk>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/install/kgpe-d16.texi b/docs/src/install/kgpe-d16.texi
new file mode 100644
index 0000000..41a834b
--- /dev/null
+++ b/docs/src/install/kgpe-d16.texi
@@ -0,0 +1,66 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title KGPE-D16 external flashing instructions
+@end titlepage
+
+@node Top
+@top KGPE-D16 external flashing instructions
+
+@menu
+* KGPE-D16 external flashing instructions::
+* KGPE-D16 boards and full systems with libreboot preinstalled::
+* External programmer::
+@end menu
+
+@node KGPE-D16 external flashing instructions
+@chapter KGPE-D16 external flashing instructions
+@anchor{#kgpe-d16-external-flashing-instructions}
+Initial flashing instructions for X200.
+
+This guide is for those who want libreboot on their ThinkPad X200 while they still have the original Lenovo BIOS present. This guide can also be followed (adapted) if you brick your X200, to know how to recover.
+
+This guide is for those who want libreboot on their ASUS KGPE-D16 motherboard, while they still have the proprietary ASUS BIOS present. This guide can also be followed (adapted) if you brick you board, to know how to recover.
+
+For more general information about this board, refer to @uref{../hcl/kgpe-d16.html,../hcl/kgpe-d16.html}.
+
+TODO: show photos here, and other info.
+
+@itemize
+@item
+@ref{#preinstall,KGPE-D16 boards (and full systems) with libreboot preinstalled}
+@item
+@ref{#programmer,External programmer}
+@end itemize
+
+@uref{index.html,Back to main index}
+
+@node KGPE-D16 boards and full systems with libreboot preinstalled
+@chapter KGPE-D16 boards (and full systems) with libreboot preinstalled
+@anchor{#kgpe-d16-boards-and-full-systems-with-libreboot-preinstalled}
+If you don't want to install libreboot yourself, companies exist that sell these boards with libreboot pre-installed, along with a free GNU/Linux distribution.
+
+Check the @uref{../../suppliers,suppliers} page for more information.
+
+@node External programmer
+@chapter External programmer
+@anchor{#external-programmer}
+Refer to @uref{bbb_setup.html,bbb_setup.html} for a guide on how to set up an external SPI programmer.
+
+The flash chip is in a PDIP 8 socket (SPI flash chip) on the motherboard, which you take out and then re-flash with libreboot, using the programmer. @strong{DO NOT} remove the chip with your hands. Use a chip extractor tool.
+
+Copyright © 2015 Francis Rowe <info@@gluglug.org.uk>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/install/r400_external.texi b/docs/src/install/r400_external.texi
new file mode 100644
index 0000000..4d5518b
--- /dev/null
+++ b/docs/src/install/r400_external.texi
@@ -0,0 +1,296 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title ThinkPad R400: flashing tutorial (BeagleBone Black)
+@end titlepage
+
+@node Top
+@top ThinkPad R400: flashing tutorial (BeagleBone Black)
+
+@menu
+* Flashing the R400 with a BeagleBone Black::
+* Libreboot T400::
+* LCD compatibly::
+* A note about CPUs::
+* A note about GPUs::
+* CPU paste required::
+* Flash chip size::
+* MAC address::
+* Initial BBB configuration::
+* Thermal paste IMPORTANT::
+* Wifi::
+* WWAN::
+* Memory::
+@end menu
+
+@node Flashing the R400 with a BeagleBone Black
+@chapter Flashing the R400 with a BeagleBone Black
+@anchor{#flashing-the-r400-with-a-beaglebone-black}
+Initial flashing instructions for R400.
+
+This guide is for those who want libreboot on their ThinkPad R400 while they still have the original Lenovo BIOS present. This guide can also be followed (adapted) if you brick your R400, to know how to recover.
+
+Before following this section, please make sure to setup your libreboot ROM properly first. Although ROM images are provided pre-built in libreboot, there are some modifications that you need to make to the one you chose before flashing. (instructions referenced later in this guide)
+
+@uref{index.html,Back to main index}
+
+@node Libreboot T400
+@chapter Libreboot T400
+@anchor{#libreboot-t400}
+You may also be interested in the smaller, more portable @uref{t400_external.html,Libreboot T400}.
+@menu
+* Serial port::
+@end menu
+
+@node Serial port
+@section Serial port
+@anchor{#serial-port}
+EHCI debug might not be needed. It has been reported that the docking station for this laptop has a serial port, so it might be possible to use that instead.
+
+@node LCD compatibly
+@chapter LCD compatibly
+@anchor{#lcd-compatibly}
+Not all LCD panels are compatible yet. See @uref{../hcl/gm45_lcd.html,../hcl/gm45_lcd.html}.
+
+@node A note about CPUs
+@chapter A note about CPUs
+@anchor{#a-note-about-cpus}
+@uref{http://www.thinkwiki.org/wiki/Category:R400,ThinkWiki} has a list of CPUs for this system. The Core 2 Duo P8400 and P8600 are believed to work in libreboot. The Core 2 Duo T9600 was confirmed to work, so the T9400 probably also works. @strong{The Core 2 Duo T5870/5670 and Celeron M 575/585 are untested!}
+@menu
+* Quad-core CPUs::
+@end menu
+
+@node Quad-core CPUs
+@section Quad-core CPUs
+@anchor{#quad-core-cpus}
+Although blocked by lenovobios (as was reported), it is reported that there are quad-core CPUs for GM45. This laptop has socketed CPUs, so it might be possible to use them (they are untested in coreboot; support may have to be added). Core 2 Quad Q9000, Q9100 or QX9300.
+
+Look at this link:@* @uref{https://en.wikipedia.org/wiki/List_of_Intel_Core_2_microprocessors#Quad-Core_Notebook_processors,https://en.wikipedia.org/wiki/List_of_Intel_Core_2_microprocessors#Quad-Core_Notebook_processors}
+
+@node A note about GPUs
+@chapter A note about GPUs
+@anchor{#a-note-about-gpus}
+Some models have an Intel GPU, while others have both an ATI and an Intel GPU; this is referred to as "switchable graphics". In the @emph{BIOS setup} program for lenovobios, you can specify that the system will use one or the other (but not both).
+
+Libreboot is known to work on systems with only the Intel GPU, using native graphics initialization. On systems with switchable graphics, the Intel GPU is used and the ATI GPU is disabled, so native graphics initialization works all the same.
+
+@node CPU paste required
+@chapter CPU paste required
+@anchor{#cpu-paste-required}
+See @ref{#paste,#paste}.
+
+@node Flash chip size
+@chapter Flash chip size
+@anchor{#flash-chip-size}
+Use this to find out:@* # @strong{dmidecode | grep ROM\ Size}@*
+
+@ref{#pagetop,Back to top of page.}
+
+@node MAC address
+@chapter MAC address
+@anchor{#mac-address}
+On the R400, the MAC address for the onboard gigabit ethernet chipset is stored inside the flash chip, along with other configuration data.
+
+Keep a note of the MAC address before disassembly; this is very important, because you will need to insert this into the libreboot ROM image before flashing it. It will be written in one of these locations:
+
+@image{../resources/images/t400/macaddress0,,,,jpg} @image{../resources/images/t400/macaddress1,,,,jpg} @image{../resources/images/x200/disassembly/0001,,,,jpg}
+
+@node Initial BBB configuration
+@chapter Initial BBB configuration
+@anchor{#initial-bbb-configuration}
+Refer to @uref{bbb_setup.html,bbb_setup.html} for how to setup the BBB for flashing.
+
+The following shows how to connect clip to the BBB (on the P9 header), for SOIC-16 (clip: Pomona 5252):
+
+@verbatim
+POMONA 5252 (correlate with the BBB guide)
+=== ethernet jack and VGA port ====
+ NC - - 21
+ 1 - - 17
+ NC - - NC
+ NC - - NC
+ NC - - NC
+ NC - - NC
+ 18 - - 3.3V (PSU)
+ 22 - - NC - this is pin 1 on the flash chip
+=== SATA port ===
+This is how you will connect. Numbers refer to pin numbers on the BBB, on the plugs near the DC jack.
+@end verbatim
+
+The following shows how to connect clip to the BBB (on the P9 header), for SOIC-8 (clip: Pomona 5250):
+
+@verbatim
+POMONA 5250 (correlate with the BBB guide)
+=== RAM slots ====
+ 18 - - 1
+ 22 - - NC
+ NC - - 21
+ 3.3V (PSU) - - 17 - this is pin 1 on the flash chip
+=== slot where the AC jack is connected ===
+This is how you will connect. Numbers refer to pin numbers on the BBB, on the plugs near the DC jack.
+@end verbatim
+
+@menu
+* Disassembly::
+@end menu
+
+@node Disassembly
+@section Disassembly
+@anchor{#disassembly}
+Remove all screws:@* @image{../resources/images/r400/0000,,,,jpg}@* Remove the HDD and optical drive:@* @image{../resources/images/r400/0001,,,,jpg}@* Remove the hinge screws:@* @image{../resources/images/r400/0002,,,,jpg} @image{../resources/images/r400/0003,,,,jpg}
+
+Remove the palm rest and keyboard:@* @image{../resources/images/r400/0004,,,,jpg} @image{../resources/images/r400/0005,,,,jpg}
+
+Remove these screws, and then remove the bezel:@* @image{../resources/images/r400/0006,,,,jpg} @image{../resources/images/r400/0007,,,,jpg}
+
+Remove the speaker screws, but don't remove the speakers yet (just set them loose):@* @image{../resources/images/r400/0008,,,,jpg} @image{../resources/images/r400/0009,,,,jpg} @image{../resources/images/r400/0010,,,,jpg}
+
+Remove these screws, and then remove the metal plate:@* @image{../resources/images/r400/0011,,,,jpg} @image{../resources/images/r400/0012,,,,jpg} @image{../resources/images/r400/0013,,,,jpg}
+
+Remove the antennas from the wifi card, and then start unrouting them:@* @image{../resources/images/r400/0014,,,,jpg} @image{../resources/images/r400/0015,,,,jpg} @image{../resources/images/r400/0016,,,,jpg} @image{../resources/images/r400/0017,,,,jpg} @image{../resources/images/r400/0018,,,,jpg} @image{../resources/images/r400/0019,,,,jpg}
+
+Disconnect the LCD cable from the motherboard:@* @image{../resources/images/r400/0020,,,,jpg} @image{../resources/images/r400/0021,,,,jpg} @image{../resources/images/r400/0022,,,,jpg} @image{../resources/images/r400/0023,,,,jpg}
+
+Remove the hinge screws, and then remove the LCD panel:@* @image{../resources/images/r400/0024,,,,jpg} @image{../resources/images/r400/0025,,,,jpg} @image{../resources/images/r400/0026,,,,jpg} @image{../resources/images/r400/0027,,,,jpg}
+
+Remove this:@* @image{../resources/images/r400/0028,,,,jpg} @image{../resources/images/r400/0029,,,,jpg}
+
+Remove this long cable (there are 3 connections):@* @image{../resources/images/r400/0030,,,,jpg} @image{../resources/images/r400/0031,,,,jpg} @image{../resources/images/r400/0032,,,,jpg} @image{../resources/images/r400/0033,,,,jpg}
+
+Disconnect the speaker cable, and remove the speakers:@* @image{../resources/images/r400/0034,,,,jpg}
+
+Remove the heatsink screws, remove the fan and then remove the heatsink/fan:@* @image{../resources/images/r400/0035,,,,jpg} @image{../resources/images/r400/0036,,,,jpg} @image{../resources/images/r400/0037,,,,jpg} @image{../resources/images/r400/0038,,,,jpg}
+
+Remove the NVRAM battery:@* @image{../resources/images/r400/0039,,,,jpg} @image{../resources/images/r400/0040,,,,jpg}
+
+Remove this screw:@* @image{../resources/images/r400/0041,,,,jpg} @image{../resources/images/r400/0042,,,,jpg}
+
+Disconnect the AC jack:@* @image{../resources/images/r400/0043,,,,jpg} @image{../resources/images/r400/0044,,,,jpg}
+
+Remove this screw and then remove what is under it:@* @image{../resources/images/r400/0045,,,,jpg}
+
+Remove this:@* @image{../resources/images/r400/0046,,,,jpg}
+
+Lift the motherboard (which is still inside the cage) from the side on the right, removing it completely:@* @image{../resources/images/r400/0047,,,,jpg} @image{../resources/images/r400/0048,,,,jpg}
+
+Remove all screws, marking each hole so that you know where to re-insert them. You should place the screws in a layout corresponding to the order that they were in before removal: @image{../resources/images/r400/0049,,,,jpg} @image{../resources/images/r400/0050,,,,jpg}
+
+Remove the motherboard from the cage, and the SPI flash chip will be next to the memory slots:@* @image{../resources/images/r400/0051,,,,jpg} @image{../resources/images/r400/0052,,,,jpg}
+
+Connect your programmer, then connect GND and 3.3V@* @image{../resources/images/t400/0065,,,,jpg} @image{../resources/images/t400/0066,,,,jpg} @image{../resources/images/t400/0067,,,,jpg} @image{../resources/images/t400/0069,,,,jpg} @image{../resources/images/t400/0070,,,,jpg} @image{../resources/images/t400/0071,,,,jpg}
+
+A dedicated 3.3V PSU was used to create this guide, but at ATX PSU is also fine:@* @image{../resources/images/t400/0072,,,,jpg}
+
+Of course, make sure to turn on your PSU:@* @image{../resources/images/x200/disassembly/0013,,,,jpg}
+
+Now, you should be ready to install libreboot.
+
+Flashrom binaries for ARM (tested on a BBB) are distributed in libreboot_util. Alternatively, libreboot also distributes flashrom source code which can be built.
+
+Log in as root on your BBB, using the instructions in @uref{bbb_setup.html#bbb_access,bbb_setup.html#bbb_access}.
+
+Test that flashrom works:@* # @strong{./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512}@* In this case, the output was:
+
+@verbatim
+flashrom v0.9.7-r1854 on Linux 3.8.13-bone47 (armv7l)
+flashrom is free software, get the source code at http://www.flashrom.org
+Calibrating delay loop... OK.
+Found Macronix flash chip "MX25L6405(D)" (8192 kB, SPI) on linux_spi.
+Found Macronix flash chip "MX25L6406E/MX25L6436E" (8192 kB, SPI) on linux_spi.
+Found Macronix flash chip "MX25L6445E/MX25L6473E" (8192 kB, SPI) on linux_spi.
+Multiple flash chip definitions match the detected chip(s): "MX25L6405(D)", "MX25L6406E/MX25L6436E", "MX25L6445E/MX25L6473E"
+Please specify which chip definition to use with the -c <chipname> option.
+@end verbatim
+
+How to backup factory.rom (change the -c option as neeed, for your flash chip):@* # @strong{./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -r factory.rom}@* # @strong{./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -r factory1.rom}@* # @strong{./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -r factory2.rom}@* Note: the @strong{-c} option is not required in libreboot's patched flashrom, because the redundant flash chip definitions in @emph{flashchips.c} have been removed.@* Now compare the 3 images:@* # @strong{sha512sum factory*.rom}@* If the hashes match, then just copy one of them (the factory.rom) to a safe place (on a drive connected to another system, not the BBB). This is useful for reverse engineering work, if there is a desirable behaviour in the original firmware that could be replicated in coreboot and libreboot.
+
+Follow the instructions at @uref{../hcl/gm45_remove_me.html#ich9gen,../hcl/gm45_remove_me.html#ich9gen} to change the MAC address inside the libreboot ROM image, before flashing it. Although there is a default MAC address inside the ROM image, this is not what you want. @strong{Make sure to always change the MAC address to one that is correct for your system.}
+
+Now flash it:@* # @strong{./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w path/to/libreboot/rom/image.rom -V}
+
+@image{../resources/images/x200/disassembly/0015,,,,jpg}
+
+You might see errors, but if it says @strong{Verifying flash... VERIFIED} at the end, then it's flashed and should boot. If you see errors, try again (and again, and again); the message @strong{Chip content is identical to the requested image} is also an indication of a successful installation.
+
+Example output from running the command (see above):
+
+@verbatim
+flashrom v0.9.7-r1854 on Linux 3.8.13-bone47 (armv7l)
+flashrom is free software, get the source code at http://www.flashrom.org
+Calibrating delay loop... OK.
+Found Macronix flash chip "MX25L6405(D)" (8192 kB, SPI) on linux_spi.
+Reading old flash chip contents... done.
+Erasing and writing flash chip... FAILED at 0x00001000! Expected=0xff, Found=0x00, failed byte count from 0x00000000-0x0000ffff: 0xd716
+ERASE FAILED!
+Reading current flash chip contents... done. Looking for another erase function.
+Erase/write done.
+Verifying flash... VERIFIED.
+@end verbatim
+
+@ref{#pagetop,Back to top of page.}
+
+@node Thermal paste IMPORTANT
+@chapter Thermal paste (IMPORTANT)
+@anchor{#thermal-paste-important}
+Because part of this procedure involved removing the heatsink, you will need to apply new paste. Arctic MX-4 is ok. You will also need isopropyl alcohol and an anti-static cloth to clean with.
+
+When re-installing the heatsink, you must first clean off all old paste with the alcohol/cloth. Then apply new paste. Arctic MX-4 is also much better than the default paste used on these systems.
+
+@image{../resources/images/t400/paste,,,,jpg}
+
+NOTE: the photo above is for illustration purposes only, and does not show how to properly apply the thermal paste. Other guides online detail the proper application procedure.
+
+@node Wifi
+@chapter Wifi
+@anchor{#wifi}
+The R400 typically comes with an Intel wifi chipset, which does not work without proprietary software. For a list of wifi chipsets that work without proprietary software, see @uref{../hcl/index.html#recommended_wifi,../hcl/index.html#recommended_wifi}.
+
+Some R400 laptops might come with an Atheros chipset, but this is 802.11g only.
+
+It is recommended that you install a new wifi chipset. This can only be done after installing libreboot, because the original firmware has a whitelist of approved chips, and it will refuse to boot if you use an 'unauthorized' wifi card.
+
+The following photos show an Atheros AR5B95 being installed, to replace the Intel chip that this R400 came with:@* @image{../resources/images/t400/0012,,,,jpg} @image{../resources/images/t400/ar5b95,,,,jpg}
+
+@node WWAN
+@chapter WWAN
+@anchor{#wwan}
+If you have a WWAN/3G card and/or sim card reader, remove them permanently. The WWAN-3G card has proprietary firmware inside; the technology is identical to what is used in mobile phones, so it can also track your movements.
+
+Not to be confused with wifi (wifi is fine).
+
+@node Memory
+@chapter Memory
+@anchor{#memory}
+You need DDR3 SODIMM PC3-8500 RAM installed, in matching pairs (speed/size). Non-matching pairs won't work. You can also install a single module (meaning, one of the slots will be empty) in slot 0.
+
+Make sure that the RAM you buy is the 2Rx8 density.
+
+The following photo shows 8GiB (2x4GiB) of RAM installed:@* @image{../resources/images/t400/memory,,,,jpg}
+@menu
+* Boot it!::
+@end menu
+
+@node Boot it!
+@section Boot it!
+@anchor{#boot-it}
+You should see something like this:
+
+@image{../resources/images/t400/boot0,,,,jpg} @image{../resources/images/t400/boot1,,,,jpg}
+
+Now @uref{../gnulinux/index.html,install GNU/Linux}.
+
+Copyright © 2014, 2015 Francis Rowe <info@@gluglug.org.uk>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/install/r500_external.texi b/docs/src/install/r500_external.texi
new file mode 100644
index 0000000..5b46f7f
--- /dev/null
+++ b/docs/src/install/r500_external.texi
@@ -0,0 +1,241 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title ThinkPad R500: flashing tutorial (BeagleBone Black)
+@end titlepage
+
+@node Top
+@top ThinkPad R500: flashing tutorial (BeagleBone Black)
+
+@menu
+* Flashing the R500 with a BeagleBone Black::
+* LCD compatibly::
+* A note about CPUs::
+* A note about GPUs::
+* CPU paste required::
+* Flash chip size::
+* MAC address::
+* Initial BBB configuration::
+* Thermal paste IMPORTANT::
+* Wifi::
+* WWAN::
+* Memory::
+@end menu
+
+@node Flashing the R500 with a BeagleBone Black
+@chapter Flashing the R500 with a BeagleBone Black
+@anchor{#flashing-the-r500-with-a-beaglebone-black}
+Initial flashing instructions for R500.
+
+This guide is for those who want libreboot on their ThinkPad R500 while they still have the original Lenovo BIOS present. This guide can also be followed (adapted) if you brick your R500, to know how to recover.
+
+Before following this section, please make sure to setup your libreboot ROM properly first. Although ROM images are provided pre-built in libreboot, there are some modifications that you need to make to the one you chose before flashing. (instructions referenced later in this guide)
+
+@strong{NOTE: This board is unsupported in libreboot 20150518. To use it in libreboot, for now, you must build for it from source using the libreboot git repository.}
+
+@uref{index.html,Back to main index}
+@menu
+* Serial port::
+@end menu
+
+@node Serial port
+@section Serial port
+@anchor{#serial-port}
+EHCI debug might not be needed. It has been reported that the docking station for this laptop has a serial port, so it might be possible to use that instead.
+
+@node LCD compatibly
+@chapter LCD compatibly
+@anchor{#lcd-compatibly}
+Not all LCD panels are known to be compatible yet. See @uref{../hcl/gm45_lcd.html,../hcl/gm45_lcd.html}.
+
+@node A note about CPUs
+@chapter A note about CPUs
+@anchor{#a-note-about-cpus}
+@uref{http://www.thinkwiki.org/wiki/Category:R500,ThinkWiki} has a list of CPUs for this system. The Core 2 Duo P8400, P8600 and P8700 are believed to work in libreboot. The Core 2 Duo T9600 was confirmed to work (on a different laptop, but still GM45), so the T9400 probably also works. @strong{The Core 2 Duo T5870/5670 and Celeron M 575/585 are untested!}
+@menu
+* Quad-core CPUs::
+@end menu
+
+@node Quad-core CPUs
+@section Quad-core CPUs
+@anchor{#quad-core-cpus}
+Although blocked by lenovobios (as was reported), it is reported that there are quad-core CPUs for GM45. This laptop has socketed CPUs, so it might be possible to use them (they are untested in coreboot; support may have to be added). Core 2 Quad Q9000, Q9100 or QX9300.
+
+Look at this link:@* @uref{https://en.wikipedia.org/wiki/List_of_Intel_Core_2_microprocessors#Quad-Core_Notebook_processors,https://en.wikipedia.org/wiki/List_of_Intel_Core_2_microprocessors#Quad-Core_Notebook_processors}
+
+@node A note about GPUs
+@chapter A note about GPUs
+@anchor{#a-note-about-gpus}
+@uref{http://www.thinkwiki.org/wiki/Category:R500,ThinkWiki} lists two possible GPUs: Intel or ATI. Only the Intel GPUs work in libreboot; the ATI GPUs require a proprietary Video BIOS, and so those are unsupported in libreboot.
+
+On other GM45 laptops in libreboot (e.g. T400, T500), so-called @emph{switchable graphics} is used, which means that the laptop will have @strong{both} an ATI and Intel GPU, or it will only have Intel, depending on which variation you have. On the systems with ATI and Intel, you can disable the ATI GPU and use only the Intel GPU, which works in libreboot.
+
+@strong{It is unknown whether R500 laptops with an ATI GPU still have an Intel GPU, where you could disable the ATI GPU and use the Intel GPU. These are budget laptops, so it's highly likely that Lenovo decided on this model to ship with one GPU or the other, but not both (GPUs cost money).}
+
+@strong{It is **HIGHLY** recommended, when ordering an R500 laptop, to **ENSURE** that the one you're ordering has an Intel GPU.}
+
+@node CPU paste required
+@chapter CPU paste required
+@anchor{#cpu-paste-required}
+See @ref{#paste,#paste}.
+
+@node Flash chip size
+@chapter Flash chip size
+@anchor{#flash-chip-size}
+Use this to find out:@* # @strong{dmidecode | grep ROM\ Size}@*
+
+It is believed that all R500 laptops have only SOIC-8 (4MiB) chips.
+
+@ref{#pagetop,Back to top of page.}
+
+@node MAC address
+@chapter MAC address
+@anchor{#mac-address}
+Unlike other GM45 thinkpads, the R500 has a different onboard gigabit NIC, where the MAC address is built-in. You do not need to change the MAC address at all on this laptop; simply flash the provided ROM images, as-is.
+
+@node Initial BBB configuration
+@chapter Initial BBB configuration
+@anchor{#initial-bbb-configuration}
+Refer to @uref{bbb_setup.html,bbb_setup.html} for how to setup the BBB for flashing.
+
+The following shows how to connect clip to the BBB (on the P9 header), for SOIC-8 (clip: Pomona 5250):
+
+@verbatim
+POMONA 5250 (correlate with the BBB guide)
+=== VGA and ethernet socket ===
+ 18 - - 1
+ 22 - - NC
+ NC - - 21
+ 3.3V (PSU) - - 17 - this is pin 1 on the flash chip
+=== DVD drive ===
+This is how you will connect. Numbers refer to pin numbers on the BBB, on the plugs near the DC jack.
+@end verbatim
+
+@menu
+* Disassembly::
+@end menu
+
+@node Disassembly
+@section Disassembly
+@anchor{#disassembly}
+@image{../resources/images/r500/0001,,,,JPG} @image{../resources/images/r500/0002,,,,JPG} @image{../resources/images/r500/0003,,,,JPG} @image{../resources/images/r500/0004,,,,JPG} @image{../resources/images/r500/0005,,,,JPG} @image{../resources/images/r500/0006,,,,JPG} @image{../resources/images/r500/0007,,,,JPG} @image{../resources/images/r500/0008,,,,JPG} @image{../resources/images/r500/0009,,,,JPG} @image{../resources/images/r500/0010,,,,JPG} @image{../resources/images/r500/0011,,,,JPG} @image{../resources/images/r500/0012,,,,JPG} @image{../resources/images/r500/0013,,,,JPG} @image{../resources/images/r500/0014,,,,JPG} @image{../resources/images/r500/0015,,,,JPG} @image{../resources/images/r500/0016,,,,JPG} @image{../resources/images/r500/0017,,,,JPG} @image{../resources/images/r500/0018,,,,JPG} @image{../resources/images/r500/0019,,,,JPG} @image{../resources/images/r500/0020,,,,JPG} @image{../resources/images/r500/0021,,,,JPG} @image{../resources/images/r500/0022,,,,JPG} @image{../resources/images/r500/0023,,,,JPG} @image{../resources/images/r500/0024,,,,JPG} @image{../resources/images/r500/0025,,,,JPG} @image{../resources/images/r500/0026,,,,JPG} @image{../resources/images/r500/0027,,,,JPG} @image{../resources/images/r500/0028,,,,JPG} @image{../resources/images/r500/0029,,,,JPG} @image{../resources/images/r500/0030,,,,JPG} @image{../resources/images/r500/0031,,,,JPG}
+
+Remove the motherboard from the cage, and the SPI flash chip will be next to the memory slots:@* @image{../resources/images/r500/0032,,,,JPG} @image{../resources/images/r500/flashchip,,,,jpg}
+
+The following image is for illustration only, to show how a SOIC-8 clip is connected. This photo is from a T500, which has a different arrangement to the R500:@* @image{../resources/images/t500/0061,,,,jpg}
+
+Connect your programmer, then connect GND and 3.3V@* @image{../resources/images/t400/0067,,,,jpg} @image{../resources/images/t400/0069,,,,jpg} @image{../resources/images/t400/0070,,,,jpg} @image{../resources/images/t400/0071,,,,jpg}
+
+A dedicated 3.3V PSU was used to create this guide, but at ATX PSU is also fine:@* @image{../resources/images/t400/0072,,,,jpg}
+
+Of course, make sure to turn on your PSU:@* @image{../resources/images/x200/disassembly/0013,,,,jpg}
+
+Now, you should be ready to install libreboot.
+
+Flashrom binaries for ARM (tested on a BBB) are distributed in libreboot_util. Alternatively, libreboot also distributes flashrom source code which can be built.
+
+Log in as root on your BBB, using the instructions in @uref{bbb_setup.html#bbb_access,bbb_setup.html#bbb_access}.
+
+Test that flashrom works:@* # @strong{./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512}@* In this case, the output was:
+
+@verbatim
+flashrom v0.9.7-r1854 on Linux 3.8.13-bone47 (armv7l)
+flashrom is free software, get the source code at http://www.flashrom.org
+Calibrating delay loop... OK.
+Found Macronix flash chip "MX25L6405(D)" (8192 kB, SPI) on linux_spi.
+Found Macronix flash chip "MX25L6406E/MX25L6436E" (8192 kB, SPI) on linux_spi.
+Found Macronix flash chip "MX25L6445E/MX25L6473E" (8192 kB, SPI) on linux_spi.
+Multiple flash chip definitions match the detected chip(s): "MX25L6405(D)", "MX25L6406E/MX25L6436E", "MX25L6445E/MX25L6473E"
+Please specify which chip definition to use with the -c <chipname> option.
+@end verbatim
+
+How to backup factory.rom (change the -c option as neeed, for your flash chip):@* # @strong{./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -r factory.rom}@* # @strong{./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -r factory1.rom}@* # @strong{./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -r factory2.rom}@* Note: the @strong{-c} option is not required in libreboot's patched flashrom, because the redundant flash chip definitions in @emph{flashchips.c} have been removed.@* Now compare the 3 images:@* # @strong{sha512sum factory*.rom}@* If the hashes match, then just copy one of them (the factory.rom) to a safe place (on a drive connected to another system, not the BBB). This is useful for reverse engineering work, if there is a desirable behaviour in the original firmware that could be replicated in coreboot and libreboot.
+
+Now flash it:@* # @strong{./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w path/to/libreboot/rom/image.rom -V}
+
+@image{../resources/images/x200/disassembly/0015,,,,jpg}
+
+You might see errors, but if it says @strong{Verifying flash... VERIFIED} at the end, then it's flashed and should boot. If you see errors, try again (and again, and again); the message @strong{Chip content is identical to the requested image} is also an indication of a successful installation.
+
+Example output from running the command (see above):
+
+@verbatim
+flashrom v0.9.7-r1854 on Linux 3.8.13-bone47 (armv7l)
+flashrom is free software, get the source code at http://www.flashrom.org
+Calibrating delay loop... OK.
+Found Macronix flash chip "MX25L6405(D)" (8192 kB, SPI) on linux_spi.
+Reading old flash chip contents... done.
+Erasing and writing flash chip... FAILED at 0x00001000! Expected=0xff, Found=0x00, failed byte count from 0x00000000-0x0000ffff: 0xd716
+ERASE FAILED!
+Reading current flash chip contents... done. Looking for another erase function.
+Erase/write done.
+Verifying flash... VERIFIED.
+@end verbatim
+
+@ref{#pagetop,Back to top of page.}
+
+@node Thermal paste IMPORTANT
+@chapter Thermal paste (IMPORTANT)
+@anchor{#thermal-paste-important}
+Because part of this procedure involved removing the heatsink, you will need to apply new paste. Arctic Silver 5 is ok. You will also need isopropyl alcohol and an anti-static cloth to clean with.
+
+When re-installing the heatsink, you must first clean off all old paste with the alcohol/cloth. Then apply new paste. AS5 is also much better than the default paste used on these systems.
+
+@image{../resources/images/t400/paste,,,,jpg}
+
+NOTE: the photo above is for illustration purposes only, and does not show how to properly apply the thermal paste. Other guides online detail the proper application procedure.
+
+@node Wifi
+@chapter Wifi
+@anchor{#wifi}
+The R500 typically comes with an Intel wifi chipset, which does not work without proprietary software. For a list of wifi chipsets that work without proprietary software, see @uref{../hcl/index.html#recommended_wifi,../hcl/index.html#recommended_wifi}.
+
+Some R500 laptops might come with an Atheros chipset, but this is 802.11g only.
+
+It is recommended that you install a new wifi chipset. This can only be done after installing libreboot, because the original firmware has a whitelist of approved chips, and it will refuse to boot if you use an 'unauthorized' wifi card.
+
+The following photos show an Atheros AR5B95 being installed, to replace the Intel chip that this R500 came with:@* @image{../resources/images/t400/0012,,,,jpg} @image{../resources/images/t400/ar5b95,,,,jpg}
+
+@node WWAN
+@chapter WWAN
+@anchor{#wwan}
+If you have a WWAN/3G card and/or sim card reader, remove them permanently. The WWAN-3G card has proprietary firmware inside; the technology is identical to what is used in mobile phones, so it can also track your movements.
+
+Not to be confused with wifi (wifi is fine).
+
+@node Memory
+@chapter Memory
+@anchor{#memory}
+You need DDR3 SODIMM PC3-8500 RAM installed, in matching pairs (speed/size). Non-matching pairs won't work. You can also install a single module (meaning, one of the slots will be empty) in slot 0.
+
+Make sure that the RAM you buy is the 2Rx8 density.
+
+The following photo shows 8GiB (2x4GiB) of RAM installed:@* @image{../resources/images/t400/memory,,,,jpg}
+@menu
+* Boot it!::
+@end menu
+
+@node Boot it!
+@section Boot it!
+@anchor{#boot-it}
+You should see something like this:
+
+@image{../resources/images/t400/boot0,,,,jpg} @image{../resources/images/t400/boot1,,,,jpg}
+
+Now @uref{../gnulinux/index.html,install GNU/Linux}.
+
+Copyright © 2015 Francis Rowe <info@@gluglug.org.uk>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/install/t400_external.texi b/docs/src/install/t400_external.texi
new file mode 100644
index 0000000..7afe4bd
--- /dev/null
+++ b/docs/src/install/t400_external.texi
@@ -0,0 +1,296 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title ThinkPad T400: flashing tutorial (BeagleBone Black)
+@end titlepage
+
+@node Top
+@top ThinkPad T400: flashing tutorial (BeagleBone Black)
+
+@menu
+* Flashing the T400 with a BeagleBone Black::
+* T400 laptops with libreboot pre-installed::
+* LCD compatibly::
+* A note about CPUs::
+* A note about GPUs::
+* CPU paste required::
+* Flash chip size::
+* MAC address::
+* Initial BBB configuration::
+* Thermal paste IMPORTANT::
+* Wifi::
+* WWAN::
+* Memory::
+@end menu
+
+@node Flashing the T400 with a BeagleBone Black
+@chapter Flashing the T400 with a BeagleBone Black
+@anchor{#flashing-the-t400-with-a-beaglebone-black}
+Initial flashing instructions for T400.
+
+This guide is for those who want libreboot on their ThinkPad T400 while they still have the original Lenovo BIOS present. This guide can also be followed (adapted) if you brick your T400, to know how to recover.
+
+@uref{index.html,Back to main index}
+
+@node T400 laptops with libreboot pre-installed
+@chapter T400 laptops with libreboot pre-installed
+@anchor{#t400-laptops-with-libreboot-pre-installed}
+If you don't want to install libreboot yourself, companies exist that sell these laptops with libreboot pre-installed, along with a free GNU/Linux distribution.
+
+Check the @uref{../../suppliers,suppliers} page for more information.
+@menu
+* Serial port::
+@end menu
+
+@node Serial port
+@section Serial port
+@anchor{#serial-port}
+EHCI debug might not be needed. It has been reported that the docking station for this laptop has a serial port, so it might be possible to use that instead.
+
+@node LCD compatibly
+@chapter LCD compatibly
+@anchor{#lcd-compatibly}
+Not all LCD panels are compatible yet. See @uref{../hcl/gm45_lcd.html,../hcl/gm45_lcd.html}.
+
+@node A note about CPUs
+@chapter A note about CPUs
+@anchor{#a-note-about-cpus}
+@uref{http://www.thinkwiki.org/wiki/Category:T400,ThinkWiki} has a list of CPUs for this system. The Core 2 Duo P8400, P8600 and P8700 are believed to work in libreboot. The T9600 was confirmed to work, so the T9500/T9550 probably also work.
+@menu
+* Quad-core CPUs::
+@end menu
+
+@node Quad-core CPUs
+@section Quad-core CPUs
+@anchor{#quad-core-cpus}
+Although blocked by lenovobios (as was reported), it is reported that there are quad-core CPUs for GM45. This laptop has socketed CPUs, so it might be possible to use them (they are untested in coreboot; support may have to be added). Core 2 Quad Q9000, Q9100 or QX9300.
+
+Look at this link:@* @uref{https://en.wikipedia.org/wiki/List_of_Intel_Core_2_microprocessors#Quad-Core_Notebook_processors,https://en.wikipedia.org/wiki/List_of_Intel_Core_2_microprocessors#Quad-Core_Notebook_processors}
+
+@node A note about GPUs
+@chapter A note about GPUs
+@anchor{#a-note-about-gpus}
+Some models have an Intel GPU, while others have both an ATI and an Intel GPU; this is referred to as "switchable graphics". In the @emph{BIOS setup} program for lenovobios, you can specify that the system will use one or the other (but not both).
+
+Libreboot is known to work on systems with only the Intel GPU, using native graphics initialization. On systems with switchable graphics, the Intel GPU is used and the ATI GPU is disabled, so native graphics initialization works all the same.
+
+@node CPU paste required
+@chapter CPU paste required
+@anchor{#cpu-paste-required}
+See @ref{#paste,#paste}.
+
+@node Flash chip size
+@chapter Flash chip size
+@anchor{#flash-chip-size}
+Use this to find out:@* # @strong{dmidecode | grep ROM\ Size}
+
+@ref{#pagetop,Back to top of page.}
+
+@node MAC address
+@chapter MAC address
+@anchor{#mac-address}
+On the T400, the MAC address for the onboard gigabit ethernet chipset is stored inside the flash chip, along with other configuration data.
+
+Keep a note of the MAC address before disassembly; this is very important, because you will need to insert this into the libreboot ROM image before flashing it. It will be written in one of these locations:
+
+@image{../resources/images/t400/macaddress0,,,,jpg} @image{../resources/images/t400/macaddress1,,,,jpg} @image{../resources/images/x200/disassembly/0001,,,,jpg}
+
+@node Initial BBB configuration
+@chapter Initial BBB configuration
+@anchor{#initial-bbb-configuration}
+Refer to @uref{bbb_setup.html,bbb_setup.html} for how to configure the BBB for flashing.
+
+The following shows how to connect clip to the BBB (on the P9 header), for SOIC-16 (clip: Pomona 5252):
+
+@verbatim
+POMONA 5252 (correlate with the BBB guide)
+=== ethernet jack and VGA port ====
+ NC - - 21
+ 1 - - 17
+ NC - - NC
+ NC - - NC
+ NC - - NC
+ NC - - NC
+ 18 - - 3.3V (PSU)
+ 22 - - NC - this is pin 1 on the flash chip
+=== SATA port ===
+This is how you will connect. Numbers refer to pin numbers on the BBB, on the plugs near the DC jack.
+@end verbatim
+
+The following shows how to connect clip to the BBB (on the P9 header), for SOIC-8 (clip: Pomona 5250):
+
+@verbatim
+POMONA 5250 (correlate with the BBB guide)
+=== RAM slots ====
+ 18 - - 1
+ 22 - - NC
+ NC - - 21
+ 3.3V (PSU) - - 17 - this is pin 1 on the flash chip
+=== slot where the AC jack is connected ===
+This is how you will connect. Numbers refer to pin numbers on the BBB, on the plugs near the DC jack.
+@end verbatim
+
+@menu
+* The procedure::
+@end menu
+
+@node The procedure
+@section The procedure
+@anchor{#the-procedure}
+Remove @emph{all} screws, placing them in the order that you removed them:@* @image{../resources/images/t400/0001,,,,jpg} @image{../resources/images/t400/0002,,,,jpg}
+
+Remove those three screws then remove the rear bezel:@* @image{../resources/images/t400/0003,,,,jpg} @image{../resources/images/t400/0004,,,,jpg} @image{../resources/images/t400/0005,,,,jpg} @image{../resources/images/t400/0006,,,,jpg}
+
+Remove the speakers:@* @image{../resources/images/t400/0007,,,,jpg} @image{../resources/images/t400/0008,,,,jpg} @image{../resources/images/t400/0009,,,,jpg} @image{../resources/images/t400/0010,,,,jpg} @image{../resources/images/t400/0011,,,,jpg}
+
+Remove the wifi:@* @image{../resources/images/t400/0012,,,,jpg} @image{../resources/images/t400/0013,,,,jpg}
+
+Remove this cable:@* @image{../resources/images/t400/0014,,,,jpg} @image{../resources/images/t400/0015,,,,jpg} @image{../resources/images/t400/0016,,,,jpg} @image{../resources/images/t400/0017,,,,jpg} @image{../resources/images/t400/0018,,,,jpg}
+
+Unroute those antenna wires:@* @image{../resources/images/t400/0019,,,,jpg} @image{../resources/images/t400/0020,,,,jpg} @image{../resources/images/t400/0021,,,,jpg} @image{../resources/images/t400/0022,,,,jpg} @image{../resources/images/t400/0023,,,,jpg}
+
+Remove the LCD assembly:@* @image{../resources/images/t400/0024,,,,jpg} @image{../resources/images/t400/0025,,,,jpg} @image{../resources/images/t400/0026,,,,jpg} @image{../resources/images/t400/0027,,,,jpg} @image{../resources/images/t400/0028,,,,jpg} @image{../resources/images/t400/0029,,,,jpg} @image{../resources/images/t400/0030,,,,jpg} @image{../resources/images/t400/0031,,,,jpg}
+
+Disconnect the NVRAM battery:@* @image{../resources/images/t400/0033,,,,jpg}
+
+Disconnect the fan:@* @image{../resources/images/t400/0034,,,,jpg}
+
+Unscrew these:@* @image{../resources/images/t400/0035,,,,jpg} @image{../resources/images/t400/0036,,,,jpg} @image{../resources/images/t400/0037,,,,jpg} @image{../resources/images/t400/0038,,,,jpg}
+
+Unscrew the heatsink, then lift it off:@* @image{../resources/images/t400/0039,,,,jpg} @image{../resources/images/t400/0040,,,,jpg}
+
+Disconnect the power jack:@* @image{../resources/images/t400/0041,,,,jpg} @image{../resources/images/t400/0042,,,,jpg}
+
+Loosen this:@* @image{../resources/images/t400/0043,,,,jpg}
+
+Remove this:@* @image{../resources/images/t400/0044,,,,jpg} @image{../resources/images/t400/0045,,,,jpg} @image{../resources/images/t400/0046,,,,jpg} @image{../resources/images/t400/0047,,,,jpg} @image{../resources/images/t400/0048,,,,jpg}
+
+Unscrew these:@* @image{../resources/images/t400/0049,,,,jpg} @image{../resources/images/t400/0050,,,,jpg}
+
+Remove this:@* @image{../resources/images/t400/0051,,,,jpg} @image{../resources/images/t400/0052,,,,jpg}
+
+Unscrew this:@* @image{../resources/images/t400/0053,,,,jpg}
+
+Remove the motherboard (the cage is still attached) from the right hand side, then lift it out:@* @image{../resources/images/t400/0054,,,,jpg} @image{../resources/images/t400/0055,,,,jpg} @image{../resources/images/t400/0056,,,,jpg}
+
+Remove these screws, placing the screws in the same layout and marking each screw hole (so that you know what ones to put the screws back into later): @image{../resources/images/t400/0057,,,,jpg} @image{../resources/images/t400/0058,,,,jpg} @image{../resources/images/t400/0059,,,,jpg} @image{../resources/images/t400/0060,,,,jpg} @image{../resources/images/t400/0061,,,,jpg} @image{../resources/images/t400/0062,,,,jpg}
+
+Separate the motherboard:@* @image{../resources/images/t400/0063,,,,jpg} @image{../resources/images/t400/0064,,,,jpg}
+
+Connect your programmer, then connect GND and 3.3V@* @image{../resources/images/t400/0065,,,,jpg} @image{../resources/images/t400/0066,,,,jpg} @image{../resources/images/t400/0067,,,,jpg} @image{../resources/images/t400/0069,,,,jpg} @image{../resources/images/t400/0070,,,,jpg} @image{../resources/images/t400/0071,,,,jpg}
+
+A dedicated 3.3V PSU was used to create this guide, but at ATX PSU is also fine:@* @image{../resources/images/t400/0072,,,,jpg}
+
+Of course, make sure to turn on your PSU:@* @image{../resources/images/x200/disassembly/0013,,,,jpg}
+
+Now, you should be ready to install libreboot.
+
+Flashrom binaries for ARM (tested on a BBB) are distributed in libreboot_util. Alternatively, libreboot also distributes flashrom source code which can be built.
+
+Log in as root on your BBB, using the instructions in @uref{bbb_setup.html#bbb_access,bbb_setup.html#bbb_access}.
+
+Test that flashrom works:@* # @strong{./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512}@* In this case, the output was:
+
+@verbatim
+flashrom v0.9.7-r1854 on Linux 3.8.13-bone47 (armv7l)
+flashrom is free software, get the source code at http://www.flashrom.org
+Calibrating delay loop... OK.
+Found Macronix flash chip "MX25L6405(D)" (8192 kB, SPI) on linux_spi.
+Found Macronix flash chip "MX25L6406E/MX25L6436E" (8192 kB, SPI) on linux_spi.
+Found Macronix flash chip "MX25L6445E/MX25L6473E" (8192 kB, SPI) on linux_spi.
+Multiple flash chip definitions match the detected chip(s): "MX25L6405(D)", "MX25L6406E/MX25L6436E", "MX25L6445E/MX25L6473E"
+Please specify which chip definition to use with the -c <chipname> option.
+@end verbatim
+
+How to backup factory.rom (change the -c option as neeed, for your flash chip):@* # @strong{./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -r factory.rom}@* # @strong{./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -r factory1.rom}@* # @strong{./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -r factory2.rom}@* Note: the @strong{-c} option is not required in libreboot's patched flashrom, because the redundant flash chip definitions in @emph{flashchips.c} have been removed.@* Now compare the 3 images:@* # @strong{sha512sum factory*.rom}@* If the hashes match, then just copy one of them (the factory.rom) to a safe place (on a drive connected to another system, not the BBB). This is useful for reverse engineering work, if there is a desirable behaviour in the original firmware that could be replicated in coreboot and libreboot.
+
+Follow the instructions at @uref{../hcl/gm45_remove_me.html#ich9gen,../hcl/gm45_remove_me.html#ich9gen} to change the MAC address inside the libreboot ROM image, before flashing it. Although there is a default MAC address inside the ROM image, this is not what you want. @strong{Make sure to always change the MAC address to one that is correct for your system.}
+
+Now flash it:@* # @strong{./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w path/to/libreboot/rom/image.rom -V}
+
+@image{../resources/images/x200/disassembly/0015,,,,jpg}
+
+You might see errors, but if it says @strong{Verifying flash... VERIFIED} at the end, then it's flashed and should boot. If you see errors, try again (and again, and again); the message @strong{Chip content is identical to the requested image} is also an indication of a successful installation.
+
+Example output from running the command (see above):
+
+@verbatim
+flashrom v0.9.7-r1854 on Linux 3.8.13-bone47 (armv7l)
+flashrom is free software, get the source code at http://www.flashrom.org
+Calibrating delay loop... OK.
+Found Macronix flash chip "MX25L6405(D)" (8192 kB, SPI) on linux_spi.
+Reading old flash chip contents... done.
+Erasing and writing flash chip... FAILED at 0x00001000! Expected=0xff, Found=0x00, failed byte count from 0x00000000-0x0000ffff: 0xd716
+ERASE FAILED!
+Reading current flash chip contents... done. Looking for another erase function.
+Erase/write done.
+Verifying flash... VERIFIED.
+@end verbatim
+
+@ref{#pagetop,Back to top of page.}
+
+@node Thermal paste IMPORTANT
+@chapter Thermal paste (IMPORTANT)
+@anchor{#thermal-paste-important}
+Because part of this procedure involved removing the heatsink, you will need to apply new paste. Arctic MX-4 is ok. You will also need isopropyl alcohol and an anti-static cloth to clean with.
+
+When re-installing the heatsink, you must first clean off all old paste with the alcohol/cloth. Then apply new paste. Arctic MX-4 is also much better than the default paste used on these systems.
+
+@image{../resources/images/t400/paste,,,,jpg}
+
+NOTE: the photo above is for illustration purposes only, and does not show how to properly apply the thermal paste. Other guides online detail the proper application procedure.
+
+@node Wifi
+@chapter Wifi
+@anchor{#wifi}
+The T400 typically comes with an Intel wifi chipset, which does not work without proprietary software. For a list of wifi chipsets that work without proprietary software, see @uref{../hcl/index.html#recommended_wifi,../hcl/index.html#recommended_wifi}.
+
+Some T400 laptops might come with an Atheros chipset, but this is 802.11g only.
+
+It is recommended that you install a new wifi chipset. This can only be done after installing libreboot, because the original firmware has a whitelist of approved chips, and it will refuse to boot if you use an 'unauthorized' wifi card.
+
+The following photos show an Atheros AR5B95 being installed, to replace the Intel chip that this T400 came with:@* @image{../resources/images/t400/0012,,,,jpg} @image{../resources/images/t400/ar5b95,,,,jpg}
+
+@node WWAN
+@chapter WWAN
+@anchor{#wwan}
+If you have a WWAN/3G card and/or sim card reader, remove them permanently. The WWAN-3G card has proprietary firmware inside; the technology is identical to what is used in mobile phones, so it can also track your movements.
+
+Not to be confused with wifi (wifi is fine).
+
+@node Memory
+@chapter Memory
+@anchor{#memory}
+You need DDR3 SODIMM PC3-8500 RAM installed, in matching pairs (speed/size). Non-matching pairs won't work. You can also install a single module (meaning, one of the slots will be empty) in slot 0.
+
+Make sure that the RAM you buy is the 2Rx8 density.
+
+The following photo shows 8GiB (2x4GiB) of RAM installed:@* @image{../resources/images/t400/memory,,,,jpg}
+@menu
+* Boot it!::
+@end menu
+
+@node Boot it!
+@section Boot it!
+@anchor{#boot-it}
+You should see something like this:
+
+@image{../resources/images/t400/boot0,,,,jpg} @image{../resources/images/t400/boot1,,,,jpg}
+
+Now @uref{../gnulinux/index.html,install GNU/Linux}.
+
+Copyright © 2015 Francis Rowe <info@@gluglug.org.uk>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/install/t500_external.texi b/docs/src/install/t500_external.texi
new file mode 100644
index 0000000..bbb0871
--- /dev/null
+++ b/docs/src/install/t500_external.texi
@@ -0,0 +1,296 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title ThinkPad T500: flashing tutorial (BeagleBone Black)
+@end titlepage
+
+@node Top
+@top ThinkPad T500: flashing tutorial (BeagleBone Black)
+
+@menu
+* Flashing the T500 with a BeagleBone Black::
+* Libreboot T400::
+* LCD compatibly::
+* A note about CPUs::
+* A note about GPUs::
+* CPU paste required::
+* Flash chip size::
+* MAC address::
+* Initial BBB configuration::
+* Thermal paste IMPORTANT::
+* Wifi::
+* WWAN::
+* Memory::
+@end menu
+
+@node Flashing the T500 with a BeagleBone Black
+@chapter Flashing the T500 with a BeagleBone Black
+@anchor{#flashing-the-t500-with-a-beaglebone-black}
+Initial flashing instructions for T500.
+
+This guide is for those who want libreboot on their ThinkPad T500 while they still have the original Lenovo BIOS present. This guide can also be followed (adapted) if you brick your T500, to know how to recover.
+
+@uref{index.html,Back to main index}
+
+@node Libreboot T400
+@chapter Libreboot T400
+@anchor{#libreboot-t400}
+You may also be interested in the smaller, more portable @uref{t400_external.html,Libreboot T400}.
+@menu
+* Serial port::
+@end menu
+
+@node Serial port
+@section Serial port
+@anchor{#serial-port}
+EHCI debug might not be needed. It has been reported that the docking station for this laptop has a serial port, so it might be possible to use that instead.
+
+@node LCD compatibly
+@chapter LCD compatibly
+@anchor{#lcd-compatibly}
+Not all LCD panels are compatible yet. See @uref{../hcl/gm45_lcd.html,../hcl/gm45_lcd.html}.
+
+@node A note about CPUs
+@chapter A note about CPUs
+@anchor{#a-note-about-cpus}
+@uref{http://www.thinkwiki.org/wiki/Category:T500,ThinkWiki} has a list of CPUs for this system. The Core 2 Duo P8400, P8600 and P8700 are believed to work in libreboot. The T9600 was also tested on the T400 and confirmed working, so the T9400/T9500/T9550 probably also work, but they are untested.
+@menu
+* Quad-core CPUs::
+@end menu
+
+@node Quad-core CPUs
+@section Quad-core CPUs
+@anchor{#quad-core-cpus}
+Although blocked by lenovobios (as was reported), it is reported that there are quad-core CPUs for GM45. This laptop has socketed CPUs, so it might be possible to use them (they are untested in coreboot; support may have to be added). Core 2 Quad Q9000, Q9100 or QX9300.
+
+Look at this link:@* @uref{https://en.wikipedia.org/wiki/List_of_Intel_Core_2_microprocessors#Quad-Core_Notebook_processors,https://en.wikipedia.org/wiki/List_of_Intel_Core_2_microprocessors#Quad-Core_Notebook_processors}
+
+@node A note about GPUs
+@chapter A note about GPUs
+@anchor{#a-note-about-gpus}
+Some models have an Intel GPU, while others have both an ATI and an Intel GPU; this is referred to as "switchable graphics". In the @emph{BIOS setup} program for lenovobios, you can specify that the system will use one or the other (but not both).
+
+Libreboot is known to work on systems with only the Intel GPU, using native graphics initialization. On systems with switchable graphics, the Intel GPU is used and the ATI GPU is disabled, so native graphics initialization works all the same.
+
+@node CPU paste required
+@chapter CPU paste required
+@anchor{#cpu-paste-required}
+See @ref{#paste,#paste}.
+
+@node Flash chip size
+@chapter Flash chip size
+@anchor{#flash-chip-size}
+Use this to find out:@* # @strong{dmidecode | grep ROM\ Size}
+
+@ref{#pagetop,Back to top of page.}
+
+@node MAC address
+@chapter MAC address
+@anchor{#mac-address}
+On the T500, the MAC address for the onboard gigabit ethernet chipset is stored inside the flash chip, along with other configuration data.
+
+Keep a note of the MAC address before disassembly; this is very important, because you will need to insert this into the libreboot ROM image before flashing it. It will be written in one of these locations:
+
+@image{../resources/images/t400/macaddress0,,,,jpg} @image{../resources/images/t400/macaddress1,,,,jpg} @image{../resources/images/x200/disassembly/0001,,,,jpg}
+
+@node Initial BBB configuration
+@chapter Initial BBB configuration
+@anchor{#initial-bbb-configuration}
+Refer to @uref{bbb_setup.html,bbb_setup.html} for how to configure the BBB for flashing.
+
+The following shows how to connect clip to the BBB (on the P9 header), for SOIC-16 (clip: Pomona 5252):
+
+@verbatim
+POMONA 5252 (correlate with the BBB guide)
+=== ethernet jack and VGA port ====
+ NC - - 21
+ 1 - - 17
+ NC - - NC
+ NC - - NC
+ NC - - NC
+ NC - - NC
+ 18 - - 3.3V (PSU)
+ 22 - - NC - this is pin 1 on the flash chip
+=== SATA port ===
+This is how you will connect. Numbers refer to pin numbers on the BBB, on the plugs near the DC jack.
+@end verbatim
+
+The following shows how to connect clip to the BBB (on the P9 header), for SOIC-8 (clip: Pomona 5250):
+
+@verbatim
+POMONA 5250 (correlate with the BBB guide)
+=== RAM slots ====
+ 18 - - 1
+ 22 - - NC
+ NC - - 21
+ 3.3V (PSU) - - 17 - this is pin 1 on the flash chip
+=== slot where the AC jack is connected ===
+This is how you will connect. Numbers refer to pin numbers on the BBB, on the plugs near the DC jack.
+@end verbatim
+
+@menu
+* The procedure::
+@end menu
+
+@node The procedure
+@section The procedure
+@anchor{#the-procedure}
+Remove all screws:@* @image{../resources/images/t500/0000,,,,jpg}@* It is also advisable to, throughout the disassembly, place any screws and/or components that you removed in the same layout or arrangement. The follow photos demonstrate this:@* @image{../resources/images/t500/0001,,,,jpg} @image{../resources/images/t500/0002,,,,jpg}
+
+Remove the HDD/SSD and optical drive:@* @image{../resources/images/t500/0003,,,,jpg} @image{../resources/images/t500/0004,,,,jpg}
+
+Remove the palm rest:@* @image{../resources/images/t500/0005,,,,jpg} @image{../resources/images/t500/0006,,,,jpg}
+
+Remove the keyboard and rear bezel:@* @image{../resources/images/t500/0007,,,,jpg} @image{../resources/images/t500/0008,,,,jpg} @image{../resources/images/t500/0009,,,,jpg} @image{../resources/images/t500/0010,,,,jpg} @image{../resources/images/t500/0011,,,,jpg} @image{../resources/images/t500/0012,,,,jpg}
+
+If you have a WWAN/3G card and/or sim card reader, remove them permanently. The WWAN-3G card has proprietary firmware inside; the technology is identical to what is used in mobile phones, so it can also track your movements:@* @image{../resources/images/t500/0013,,,,jpg} @image{../resources/images/t500/0017,,,,jpg} @image{../resources/images/t500/0018,,,,jpg}
+
+Remove this frame, and then remove the wifi chip:@* @image{../resources/images/t500/0014,,,,jpg} @image{../resources/images/t500/0015,,,,jpg} @image{../resources/images/t500/0016,,,,jpg}
+
+Remove the speakers:@* @image{../resources/images/t500/0019,,,,jpg} @image{../resources/images/t500/0020,,,,jpg} @image{../resources/images/t500/0021,,,,jpg} @image{../resources/images/t500/0022,,,,jpg} @image{../resources/images/t500/0023,,,,jpg} @image{../resources/images/t500/0024,,,,jpg} @image{../resources/images/t500/0025,,,,jpg}
+
+Remove the NVRAM battery (already removed in this photo):@* @image{../resources/images/t500/0026,,,,jpg}
+
+When you re-assemble, you will be replacing the wifi chip with another. These two screws don't hold anything together, but they are included in your system because the screw holes for half-height cards are a different size, so use these if you will be installing a half-height card:@* @image{../resources/images/t500/0027,,,,jpg}
+
+Unroute the antenna wires:@* @image{../resources/images/t500/0028,,,,jpg} @image{../resources/images/t500/0029,,,,jpg} @image{../resources/images/t500/0030,,,,jpg} @image{../resources/images/t500/0031,,,,jpg}
+
+Disconnect the LCD cable from the motherboard:@* @image{../resources/images/t500/0032,,,,jpg} @image{../resources/images/t500/0033,,,,jpg}
+
+Remove the LCD assembly hinge screws, and then remove the LCD assembly:@* @image{../resources/images/t500/0034,,,,jpg} @image{../resources/images/t500/0035,,,,jpg} @image{../resources/images/t500/0036,,,,jpg}
+
+Remove the fan and heatsink:@* @image{../resources/images/t500/0037,,,,jpg} @image{../resources/images/t500/0038,,,,jpg} @image{../resources/images/t500/0039,,,,jpg}
+
+Remove this screw:@* @image{../resources/images/t500/0040,,,,jpg}
+
+Remove these cables, keeping note of how and in what arrangement they are connected:@* @image{../resources/images/t500/0041,,,,jpg} @image{../resources/images/t500/0042,,,,jpg} @image{../resources/images/t500/0043,,,,jpg} @image{../resources/images/t500/0044,,,,jpg} @image{../resources/images/t500/0045,,,,jpg} @image{../resources/images/t500/0046,,,,jpg} @image{../resources/images/t500/0047,,,,jpg} @image{../resources/images/t500/0048,,,,jpg} @image{../resources/images/t500/0049,,,,jpg}
+
+Disconnect the power jack:@* @image{../resources/images/t500/0050,,,,jpg} @image{../resources/images/t500/0051,,,,jpg}
+
+Remove the motherboard and cage from the base (the marked hole is where those cables were routed through):@* @image{../resources/images/t500/0052,,,,jpg} @image{../resources/images/t500/0053,,,,jpg}
+
+Remove all screws, arranging them in the same layout when placing the screws on a surface and marking each screw hole (this is to reduce the possibility of putting them back in the wrong holes):@* @image{../resources/images/t500/0054,,,,jpg} @image{../resources/images/t500/0055,,,,jpg}
+
+Also remove this:@* @image{../resources/images/t500/0056,,,,jpg} @image{../resources/images/t500/0057,,,,jpg}
+
+Separate the motherboard from the cage:@* @image{../resources/images/t500/0058,,,,jpg} @image{../resources/images/t500/0059,,,,jpg}
+
+The flash chip is next to the memory slots. On this system, it was a SOIC-8 (4MiB or 32Mb) flash chip:@* @image{../resources/images/t500/0060,,,,jpg}
+
+Connect your programmer, then connect GND and 3.3V@* @image{../resources/images/t500/0061,,,,jpg}@* @image{../resources/images/t400/0067,,,,jpg} @image{../resources/images/t400/0069,,,,jpg} @image{../resources/images/t400/0070,,,,jpg} @image{../resources/images/t400/0071,,,,jpg}
+
+A dedicated 3.3V PSU was used to create this guide, but at ATX PSU is also fine:@* @image{../resources/images/t400/0072,,,,jpg}
+
+Of course, make sure to turn on your PSU:@* @image{../resources/images/x200/disassembly/0013,,,,jpg}
+
+Now, you should be ready to install libreboot.
+
+Flashrom binaries for ARM (tested on a BBB) are distributed in libreboot_util. Alternatively, libreboot also distributes flashrom source code which can be built.
+
+Log in as root on your BBB, using the instructions in @uref{bbb_setup.html#bbb_access,bbb_setup.html#bbb_access}.
+
+Test that flashrom works:@* # @strong{./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512}@* In this case, the output was:
+
+@verbatim
+flashrom v0.9.7-r1854 on Linux 3.8.13-bone47 (armv7l)
+flashrom is free software, get the source code at http://www.flashrom.org
+Calibrating delay loop... OK.
+Found Macronix flash chip "MX25L6405(D)" (8192 kB, SPI) on linux_spi.
+Found Macronix flash chip "MX25L6406E/MX25L6436E" (8192 kB, SPI) on linux_spi.
+Found Macronix flash chip "MX25L6445E/MX25L6473E" (8192 kB, SPI) on linux_spi.
+Multiple flash chip definitions match the detected chip(s): "MX25L6405(D)", "MX25L6406E/MX25L6436E", "MX25L6445E/MX25L6473E"
+Please specify which chip definition to use with the -c <chipname> option.
+@end verbatim
+
+How to backup factory.rom (change the -c option as neeed, for your flash chip):@* # @strong{./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -r factory.rom}@* # @strong{./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -r factory1.rom}@* # @strong{./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -r factory2.rom}@* Note: the @strong{-c} option is not required in libreboot's patched flashrom, because the redundant flash chip definitions in @emph{flashchips.c} have been removed.@* Now compare the 3 images:@* # @strong{sha512sum factory*.rom}@* If the hashes match, then just copy one of them (the factory.rom) to a safe place (on a drive connected to another system, not the BBB). This is useful for reverse engineering work, if there is a desirable behaviour in the original firmware that could be replicated in coreboot and libreboot.
+
+Follow the instructions at @uref{../hcl/gm45_remove_me.html#ich9gen,../hcl/gm45_remove_me.html#ich9gen} to change the MAC address inside the libreboot ROM image, before flashing it. Although there is a default MAC address inside the ROM image, this is not what you want. @strong{Make sure to always change the MAC address to one that is correct for your system.}
+
+Now flash it:@* # @strong{./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w path/to/libreboot/rom/image.rom -V}
+
+@image{../resources/images/x200/disassembly/0015,,,,jpg}
+
+You might see errors, but if it says @strong{Verifying flash... VERIFIED} at the end, then it's flashed and should boot. If you see errors, try again (and again, and again); the message @strong{Chip content is identical to the requested image} is also an indication of a successful installation.
+
+Example output from running the command (see above):
+
+@verbatim
+flashrom v0.9.7-r1854 on Linux 3.8.13-bone47 (armv7l)
+flashrom is free software, get the source code at http://www.flashrom.org
+Calibrating delay loop... OK.
+Found Macronix flash chip "MX25L6405(D)" (8192 kB, SPI) on linux_spi.
+Reading old flash chip contents... done.
+Erasing and writing flash chip... FAILED at 0x00001000! Expected=0xff, Found=0x00, failed byte count from 0x00000000-0x0000ffff: 0xd716
+ERASE FAILED!
+Reading current flash chip contents... done. Looking for another erase function.
+Erase/write done.
+Verifying flash... VERIFIED.
+@end verbatim
+
+@ref{#pagetop,Back to top of page.}
+
+@node Thermal paste IMPORTANT
+@chapter Thermal paste (IMPORTANT)
+@anchor{#thermal-paste-important}
+Because part of this procedure involved removing the heatsink, you will need to apply new paste. Arctic MX-4 is ok. You will also need isopropyl alcohol and an anti-static cloth to clean with.
+
+When re-installing the heatsink, you must first clean off all old paste with the alcohol/cloth. Then apply new paste. Arctic MX-4 is also much better than the default paste used on these systems.
+
+@image{../resources/images/t400/paste,,,,jpg}
+
+NOTE: the photo above is for illustration purposes only, and does not show how to properly apply the thermal paste. Other guides online detail the proper application procedure.
+
+@node Wifi
+@chapter Wifi
+@anchor{#wifi}
+The T500 typically comes with an Intel wifi chipset, which does not work without proprietary software. For a list of wifi chipsets that work without proprietary software, see @uref{../hcl/index.html#recommended_wifi,../hcl/index.html#recommended_wifi}.
+
+Some T500 laptops might come with an Atheros chipset, but this is 802.11g only.
+
+It is recommended that you install a new wifi chipset. This can only be done after installing libreboot, because the original firmware has a whitelist of approved chips, and it will refuse to boot if you use an 'unauthorized' wifi card.
+
+The following photos show an Atheros AR5B95 being installed, to replace the Intel chip that this T500 came with:@* @image{../resources/images/t400/0012,,,,jpg} @image{../resources/images/t400/ar5b95,,,,jpg}
+
+@node WWAN
+@chapter WWAN
+@anchor{#wwan}
+If you have a WWAN/3G card and/or sim card reader, remove them permanently. The WWAN-3G card has DMA, and proprietary firmware inside; the technology is identical to what is used in mobile phones, so it can also track your movements.
+
+Not to be confused with wifi (wifi is fine).
+
+@node Memory
+@chapter Memory
+@anchor{#memory}
+You need DDR3 SODIMM PC3-8500 RAM installed, in matching pairs (speed/size). Non-matching pairs won't work. You can also install a single module (meaning, one of the slots will be empty) in slot 0.
+
+Make sure that the RAM you buy is the 2Rx8 density.
+
+The following photo shows 8GiB (2x4GiB) of RAM installed:@* @image{../resources/images/t400/memory,,,,jpg}
+@menu
+* Boot it!::
+@end menu
+
+@node Boot it!
+@section Boot it!
+@anchor{#boot-it}
+You should see something like this:
+
+@image{../resources/images/t500/0062,,,,jpg}
+
+Now @uref{../gnulinux/index.html,install GNU/Linux}.
+
+Copyright © 2015 Francis Rowe <info@@gluglug.org.uk>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/install/t60_unbrick.texi b/docs/src/install/t60_unbrick.texi
new file mode 100644
index 0000000..7c94b40
--- /dev/null
+++ b/docs/src/install/t60_unbrick.texi
@@ -0,0 +1,152 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title ThinkPad T60: Recovery guide
+@end titlepage
+
+@node Top
+@top ThinkPad T60: Recovery guide
+
+@menu
+* ThinkPad T60 Recovery guide::
+* Brick type 1 bucts not reset::
+* bad rom or user error system won't boot::
+@end menu
+
+@node ThinkPad T60 Recovery guide
+@chapter ThinkPad T60: Recovery guide
+@anchor{#thinkpad-t60-recovery-guide}
+This section documents how to recover from a bad flash that prevents your ThinkPad T60 from booting.
+
+@uref{index.html,Back to previous index}
+@menu
+* Table of Contents::
+@end menu
+
+@node Table of Contents
+@section Table of Contents
+@anchor{#table-of-contents}
+@itemize
+@item
+Types of brick:
+@itemize
+@item
+@ref{#bucts_brick,Brick type 1: bucts not reset}
+@item
+@ref{#recovery,Brick type 2: bad rom (or user error), system won't boot}
+@end itemize
+
+@end itemize
+
+@node Brick type 1 bucts not reset
+@chapter Brick type 1: bucts not reset.
+@anchor{#brick-type-1-bucts-not-reset.}
+You still have Lenovo BIOS, or you had libreboot running and you flashed another ROM; and you had bucts 1 set and the ROM wasn't dd'd.* or if Lenovo BIOS was present and libreboot wasn't flashed.@*@* In this case, unbricking is easy: reset BUC.TS to 0 by removing that yellow cmos coin (it's a battery) and putting it back after a minute or two:@* @image{../resources/images/t60_dev/0006,,,,JPG}@*@* *Those dd commands should be applied to all newly compiled T60 ROM images (the ROM images in libreboot binary archives already have this applied!):@* dd if=coreboot.rom of=top64k.bin bs=1 skip=$[$(stat -c %s coreboot.rom) - 0x10000] count=64k@* dd if=coreboot.rom bs=1 skip=$[$(stat -c %s coreboot.rom) - 0x20000] count=64k | hexdump@* dd if=top64k.bin of=coreboot.rom bs=1 seek=$[$(stat -c %s coreboot.rom) - 0x20000] count=64k conv=notrunc@* (doing this makes the ROM suitable for use when flashing a system that still has Lenovo BIOS running, using those instructions: @uref{http://www.coreboot.org/Board:lenovo/x60/Installation,http://www.coreboot.org/Board:lenovo/x60/Installation}. (it says x60, but instructions for t60 are identical)
+
+@node bad rom or user error system won't boot
+@chapter bad rom (or user error), system won't boot
+@anchor{#bad-rom-or-user-error-system-wont-boot}
+In this scenario, you compiled a ROM that had an incorrect configuration, or there is an actual bug preventing your system from booting. Or, maybe, you set BUC.TS to 0 and shut down after first flash while Lenovo BIOS was running. In any case, your system is bricked and will not boot at all.
+
+"Unbricking" means flashing a known-good (working) ROM. The problem: you can't boot the system, making this difficult. In this situation, external hardware (see hardware requirements above) is needed which can flash the SPI chip (where libreboot resides).
+
+Remove those screws and remove the HDD:@* @image{../resources/images/t60_dev/0001,,,,JPG} @image{../resources/images/t60_dev/0002,,,,JPG}
+
+Lift off the palm rest:@* @image{../resources/images/t60_dev/0003,,,,JPG}
+
+Lift up the keyboard, pull it back a bit, flip it over like that and then disconnect it from the board:@* @image{../resources/images/t60_dev/0004,,,,JPG} @image{../resources/images/t60_dev/0005,,,,JPG} @image{../resources/images/t60_dev/0006,,,,JPG}
+
+Gently wedge both sides loose:@* @image{../resources/images/t60_dev/0007,,,,JPG} @image{../resources/images/t60_dev/0008,,,,JPG}
+
+Remove that cable from the position:@* @image{../resources/images/t60_dev/0009,,,,JPG} @image{../resources/images/t60_dev/0010,,,,JPG}
+
+Now remove that bezel. Remove wifi, nvram battery and speaker connector (also remove 56k modem, on the left of wifi):@* @image{../resources/images/t60_dev/0011,,,,JPG}
+
+Remove those screws:@* @image{../resources/images/t60_dev/0012,,,,JPG}
+
+Disconnect the power jack:@* @image{../resources/images/t60_dev/0013,,,,JPG}
+
+Remove nvram battery:@* @image{../resources/images/t60_dev/0014,,,,JPG}
+
+Disconnect cable (for 56k modem) and disconnect the other cable:@* @image{../resources/images/t60_dev/0015,,,,JPG} @image{../resources/images/t60_dev/0016,,,,JPG}
+
+Disconnect speaker cable:@* @image{../resources/images/t60_dev/0017,,,,JPG}
+
+Disconnect the other end of the 56k modem cable:@* @image{../resources/images/t60_dev/0018,,,,JPG}
+
+Make sure you removed it:@* @image{../resources/images/t60_dev/0019,,,,JPG}
+
+Unscrew those:@* @image{../resources/images/t60_dev/0020,,,,JPG}
+
+Make sure you removed those:@* @image{../resources/images/t60_dev/0021,,,,JPG}
+
+Disconnect LCD cable from board:@* @image{../resources/images/t60_dev/0022,,,,JPG}
+
+Remove those screws then remove the LCD assembly:@* @image{../resources/images/t60_dev/0023,,,,JPG} @image{../resources/images/t60_dev/0024,,,,JPG} @image{../resources/images/t60_dev/0025,,,,JPG}
+
+Once again, make sure you removed those:@* @image{../resources/images/t60_dev/0026,,,,JPG}
+
+Remove the shielding containing the motherboard, then flip it over. Remove these screws, placing them on a steady surface in the same layout as they were in before you removed them. Also, you should mark each screw hole after removing the screw (a permanent marker pen will do), this is so that you have a point of reference when re-assembling the system:@* @image{../resources/images/t60_dev/0027,,,,JPG} @image{../resources/images/t60_dev/0028,,,,JPG} @image{../resources/images/t60_dev/0029,,,,JPG} @image{../resources/images/t60_dev/0031,,,,JPG} @image{../resources/images/t60_dev/0032,,,,JPG} @image{../resources/images/t60_dev/0033,,,,JPG}
+
+Now wire up the BBB and the Pomona with your PSU.@* Refer to @uref{bbb_setup.html,bbb_setup.html} for how to setup the BBB for flashing.@* @strong{Note, the guide mentions a 3.3v DC PSU but you don't need this on the T60: if you don't have or don't want to use an external PSU, then make sure not to connect the 3.3v leads mentioned in the guide; instead, connect the AC adapter (the one that normally charges your battery) so that the board has power (but don't boot it up)}@* @image{../resources/images/t60_dev/0030,,,,JPG}@* Correlate the following with the BBB guide linked above:
+
+@verbatim
+POMONA 5250:
+=== DVD drive ====
+ 18 - - 1
+ 22 - - NC ---- RAM is on this end
+ NC - - 21
+ 3.3V (PSU) - - 17 - this is pin 1 on the flash chip
+=== audio jacks ===
+This is how you will connect. Numbers refer to pin numbers on the BBB, on the plugs near the DC jack.
+@end verbatim
+
+Connect the pomona from the BBB to the flash chip. No pics unfortunately. (use the text diagram above).
+
+Flashrom binaries for ARM (tested on a BBB) are distributed in libreboot_util. Alternatively, libreboot also distributes flashrom source code which can be built.
+
+SSH'd into the BBB:@* # @strong{./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w yourrom.rom}
+
+It should be @strong{Verifying flash... VERIFIED} at the end. If flashrom complains about multiple flash chip definitions detected, then choose one of them following the instructions in the output.
+
+Put those screws back:@* @image{../resources/images/t60_dev/0047,,,,JPG}
+
+Put it back into lower chassis:@* @image{../resources/images/t60_dev/0048,,,,JPG}
+
+Attach LCD and insert screws (also, attach the lcd cable to the board):@* @image{../resources/images/t60_dev/0049,,,,JPG}
+
+Insert those screws:@* @image{../resources/images/t60_dev/0050,,,,JPG}
+
+On the CPU (and there is another chip south-east to it, sorry forgot to take pic) clean off the old thermal paste (with the alcohol) and apply new (Artic Silver 5 is good, others are good too) you should also clean the heatsink the same way@* @image{../resources/images/t60_dev/0051,,,,JPG}
+
+Attach the heatsink and install the screws (also, make sure to install the AC jack as highlighted):@* @image{../resources/images/t60_dev/0052,,,,JPG}
+
+Reinstall that upper bezel:@* @image{../resources/images/t60_dev/0053,,,,JPG}
+
+Do that:@* @image{../resources/images/t60_dev/0054,,,,JPG} @image{../resources/images/t60_dev/0055,,,,JPG}
+
+Re-attach modem, wifi, (wwan?), and all necessary cables. Sorry, forgot to take pics. Look at previous removal steps to see where they go back to.
+
+Attach keyboard and install nvram battery:@* @image{../resources/images/t60_dev/0056,,,,JPG} @image{../resources/images/t60_dev/0057,,,,JPG}
+
+Place keyboard and (sorry, forgot to take pics) reinstall the palmrest and insert screws on the underside:@* @image{../resources/images/t60_dev/0058,,,,JPG}
+
+It lives!@* @image{../resources/images/t60_dev/0071,,,,JPG} @image{../resources/images/t60_dev/0072,,,,JPG} @image{../resources/images/t60_dev/0073,,,,JPG}
+
+Always stress test ('stress -c 2' and xsensors. below 90C is ok) when replacing cpu paste/heatsink:@* @image{../resources/images/t60_dev/0074,,,,JPG}
+
+Copyright © 2014, 2015 Francis Rowe <info@@gluglug.org.uk>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/install/x200_external.texi b/docs/src/install/x200_external.texi
new file mode 100644
index 0000000..f148c6c
--- /dev/null
+++ b/docs/src/install/x200_external.texi
@@ -0,0 +1,277 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title ThinkPad X200: flashing tutorial (BeagleBone Black)
+@end titlepage
+
+@node Top
+@top ThinkPad X200: flashing tutorial (BeagleBone Black)
+
+@menu
+* Flashing the X200 with a BeagleBone Black::
+* X200 laptops with libreboot pre-installed::
+* Flash chip size::
+* MAC address::
+* Initial BBB configuration::
+* Wifi::
+* WWAN::
+* Memory::
+@end menu
+
+@node Flashing the X200 with a BeagleBone Black
+@chapter Flashing the X200 with a BeagleBone Black
+@anchor{#flashing-the-x200-with-a-beaglebone-black}
+Initial flashing instructions for X200.
+
+This guide is for those who want libreboot on their ThinkPad X200 while they still have the original Lenovo BIOS present. This guide can also be followed (adapted) if you brick your X200, to know how to recover.
+
+@itemize
+@item
+@ref{#preinstall,X200 laptops with libreboot pre-installed}
+@item
+@ref{#flashchips,Flash chips}
+@item
+@ref{#macaddress,MAC address}
+@item
+@ref{#clip,Initial BBB configuration and installation procedure}
+@item
+@ref{#boot,Boot it!}
+@item
+@ref{#wifi,Wifi}
+@item
+@ref{#wwan,wwan}
+@item
+@ref{#memory,Memory}
+@item
+@ref{#gpio33,X200S and X200 Tablet users: GPIO33 trick will not work.}
+@end itemize
+
+@uref{index.html,Back to main index}
+
+@node X200 laptops with libreboot pre-installed
+@chapter X200 laptops with libreboot pre-installed
+@anchor{#x200-laptops-with-libreboot-pre-installed}
+If you don't want to install libreboot yourself, companies exist that sell these laptops with libreboot pre-installed, along with a free GNU/Linux distribution.
+
+Check the @uref{../../suppliers,suppliers} page for more information.
+
+@node Flash chip size
+@chapter Flash chip size
+@anchor{#flash-chip-size}
+Use this to find out:@* # @strong{dmidecode | grep ROM\ Size}
+
+The X200S and X200 Tablet will use a WSON-8 flash chip, on the bottom of the motherboard (this requires removal of the motherboard). @strong{Not all X200S/X200T are supported; see @uref{../hcl/x200.html#x200s,../hcl/x200.html#x200s}.}
+
+@ref{#pagetop,Back to top of page.}
+
+@node MAC address
+@chapter MAC address
+@anchor{#mac-address}
+On the X200/X200S/X200T, the MAC address for the onboard gigabit ethernet chipset is stored inside the flash chip, along with other configuration data.
+
+Keep a note of the MAC address before disassembly; this is very important, because you will need to insert this into the libreboot ROM image before flashing it. It will be written in one of these locations:
+
+@image{../resources/images/x200/disassembly/0002,,,,jpg} @image{../resources/images/x200/disassembly/0001,,,,jpg}
+
+@node Initial BBB configuration
+@chapter Initial BBB configuration
+@anchor{#initial-bbb-configuration}
+Refer to @uref{bbb_setup.html,bbb_setup.html} for how to set up the BBB for flashing.
+
+The following shows how to connect the clip to the BBB (on the P9 header), for SOIC-16 (clip: Pomona 5252):
+
+@verbatim
+POMONA 5252 (correlate with the BBB guide)
+=== front (display) on your X200 ====
+ NC - - 21
+ 1 - - 17
+ NC - - NC
+ NC - - NC
+ NC - - NC
+ NC - - NC
+ 18 - - 3.3V (PSU)
+ 22 - - NC - this is pin 1 on the flash chip
+=== back (palmrest) on your X200 ===
+This is how you will connect. Numbers refer to pin numbers on the BBB, on the plugs near the DC jack.
+Here is a photo of the SOIC-16 flash chip. Pins are labelled:
+
+@end verbatim
+
+The following shows how to connect the clip to the BBB (on the P9 header), for SOIC-8 (clip: Pomona 5250):
+
+@verbatim
+POMONA 5250 (correlate with the BBB guide)
+=== left side of the X200 (where the VGA port is) ====
+ 18 - - 1
+ 22 - - NC
+ NC - - 21
+ 3.3V (PSU) - - 17 - this is pin 1 on the flash chip. in front of it is the screen.
+=== right side of the X200 (where the audio jacks are) ===
+This is how you will connect. Numbers refer to pin numbers on the BBB, on the plugs near the DC jack.
+Here is a photo of the SOIC-8 flash chip. The pins are labelled:
+
+
+Look at the pads in that photo, on the left and right. Those are for SOIC-16. Would it be possible to remove the SOIC-8 and solder a SOIC-16
+chip on those pins?
+@end verbatim
+
+@strong{On the X200S and X200 Tablet the flash chip is underneath the board, in a WSON package. The pinout is very much the same as a SOIC-8, except you need to solder (there are no clips available).@* The following image shows how this is done:}@* @image{../resources/images/x200/wson_soldered,,,,jpg} @* In this image, a pin header was soldered onto the WSON. Another solution might be to de-solder the WSON-8 chip and put a SOIC-8 there instead. Check the list of SOIC-8 flash chips at @uref{../hcl/gm45_remove_me.html#flashchips,../hcl/gm45_remove_me.html#flashchips} but do note that these are only 4MiB (32Mb) chips. The only X200 SPI chips with 8MiB capacity are SOIC-16. For 8MiB capacity in this case, the X201 SOIC-8 flash chip (Macronix 25L6445E) might work.
+@menu
+* The procedure::
+@end menu
+
+@node The procedure
+@section The procedure
+@anchor{#the-procedure}
+This section is for the X200. This does not apply to the X200S or X200 Tablet (for those systems, you have to remove the motherboard completely, since the flash chip is on the other side of the board).
+
+Remove these screws:@* @image{../resources/images/x200/disassembly/0003,,,,jpg}
+
+Push the keyboard forward, gently, then lift it off and disconnect it from the board:@* @image{../resources/images/x200/disassembly/0004,,,,jpg} @image{../resources/images/x200/disassembly/0005,,,,jpg}
+
+Pull the palm rest off, lifting from the left and right side at the back of the palm rest:@* @image{../resources/images/x200/disassembly/0006,,,,jpg}
+
+Lift back the tape that covers a part of the flash chip, and then connect the clip:@* @image{../resources/images/x200/disassembly/0007,,,,jpg} @image{../resources/images/x200/disassembly/0008,,,,jpg}
+
+On pin 2 of the BBB, where you have the ground (GND), connect the ground to your PSU:@* @image{../resources/images/x200/disassembly/0009,,,,jpg} @image{../resources/images/x200/disassembly/0010,,,,jpg}
+
+Connect the 3.3V supply from your PSU to the flash chip (via the clip):@* @image{../resources/images/x200/disassembly/0011,,,,jpg} @image{../resources/images/x200/disassembly/0012,,,,jpg}
+
+Of course, make sure that your PSU is also plugged in and turn on:@* @image{../resources/images/x200/disassembly/0013,,,,jpg}
+
+This tutorial tells you to use an ATX PSU, for the 3.3V DC supply. The PSU used when taking these photos is actually not an ATX PSU, but a PSU that is designed specifically for providing 3.3V DC (an ATX PSU will also work):@* @image{../resources/images/x200/disassembly/0014,,,,jpg}
+
+Now, you should be ready to install libreboot.
+
+Flashrom binaries for ARM (tested on a BBB) are distributed in libreboot_util. Alternatively, libreboot also distributes flashrom source code which can be built.
+
+Log in as root on your BBB, using the instructions in @uref{bbb_setup.html#bbb_access,bbb_setup.html#bbb_access}.
+
+Test that flashrom works:@* # @strong{./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512}@* In this case, the output was:
+
+@verbatim
+flashrom v0.9.7-r1854 on Linux 3.8.13-bone47 (armv7l)
+flashrom is free software, get the source code at http://www.flashrom.org
+Calibrating delay loop... OK.
+Found Macronix flash chip "MX25L6405(D)" (8192 kB, SPI) on linux_spi.
+Found Macronix flash chip "MX25L6406E/MX25L6436E" (8192 kB, SPI) on linux_spi.
+Found Macronix flash chip "MX25L6445E/MX25L6473E" (8192 kB, SPI) on linux_spi.
+Multiple flash chip definitions match the detected chip(s): "MX25L6405(D)", "MX25L6406E/MX25L6436E", "MX25L6445E/MX25L6473E"
+Please specify which chip definition to use with the -c <chipname> option.
+@end verbatim
+
+How to backup factory.rom (change the -c option as neeed, for your flash chip):@* # @strong{./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -r factory.rom}@* # @strong{./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -r factory1.rom}@* # @strong{./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -r factory2.rom}@* Note: the @strong{-c} option is not required in libreboot's patched flashrom, because the redundant flash chip definitions in @emph{flashchips.c} have been removed.@* Now compare the 3 images:@* # @strong{sha512sum factory*.rom}@* If the hashes match, then just copy one of them (the factory.rom) to a safe place (on a drive connected to another system, not the BBB). This is useful for reverse engineering work, if there is a desirable behaviour in the original firmware that could be replicated in coreboot and libreboot.
+
+Follow the instructions at @uref{../hcl/gm45_remove_me.html#ich9gen,../hcl/gm45_remove_me.html#ich9gen} to change the MAC address inside the libreboot ROM image, before flashing it. Although there is a default MAC address inside the ROM image, this is not what you want. @strong{Make sure to always change the MAC address to one that is correct for your system.}
+
+Now flash it:@* # @strong{./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w path/to/libreboot/rom/image.rom -V}
+
+@image{../resources/images/x200/disassembly/0015,,,,jpg}
+
+You might see errors, but if it says @strong{Verifying flash... VERIFIED} at the end, then it's flashed and should boot. If you see errors, try again (and again, and again); the message @strong{Chip content is identical to the requested image} is also an indication of a successful installation.
+
+Example output from running the command (see above):
+
+@verbatim
+flashrom v0.9.7-r1854 on Linux 3.8.13-bone47 (armv7l)
+flashrom is free software, get the source code at http://www.flashrom.org
+Calibrating delay loop... OK.
+Found Macronix flash chip "MX25L6405(D)" (8192 kB, SPI) on linux_spi.
+Reading old flash chip contents... done.
+Erasing and writing flash chip... FAILED at 0x00001000! Expected=0xff, Found=0x00, failed byte count from 0x00000000-0x0000ffff: 0xd716
+ERASE FAILED!
+Reading current flash chip contents... done. Looking for another erase function.
+Erase/write done.
+Verifying flash... VERIFIED.
+@end verbatim
+
+@ref{#pagetop,Back to top of page.}
+
+@node Wifi
+@chapter Wifi
+@anchor{#wifi}
+The X200 typically comes with an Intel wifi chipset, which does not work without proprietary software. For a list of wifi chipsets that work without proprietary software, see @uref{../hcl/index.html#recommended_wifi,../hcl/index.html#recommended_wifi}.
+
+Some X200 laptops come with an Atheros chipset, but this is 802.11g only.
+
+It is recommended that you install a new wifi chipset. This can only be done after installing libreboot, because the original firmware has a whitelist of approved chips, and it will refuse to boot if you use an 'unauthorized' wifi card.
+
+The following photos show an Atheros AR5B95 being installed, to replace the Intel chip that this X200 came with:@* @image{../resources/images/x200/disassembly/0016,,,,jpg} @image{../resources/images/x200/disassembly/0017,,,,jpg}
+
+@node WWAN
+@chapter WWAN
+@anchor{#wwan}
+If you have a WWAN/3G card and/or sim card reader, remove them permanently. The WWAN-3G card has proprietary firmware inside; the technology is identical to what is used in mobile phones, so it can also track your movements.
+
+Not to be confused with wifi (wifi is fine).
+
+@node Memory
+@chapter Memory
+@anchor{#memory}
+You need DDR3 SODIMM PC3-8500 RAM installed, in matching pairs (speed/size). Non-matching pairs won't work. You can also install a single module (meaning, one of the slots will be empty) in slot 0.
+
+Make sure that the RAM you buy is the 2Rx8 density.
+
+In this photo, 8GiB of RAM (2x4GiB) is installed:@* @image{../resources/images/x200/disassembly/0018,,,,jpg}
+@menu
+* Boot it!::
+* X200S and X200 Tablet users GPIO33 trick will not work::
+@end menu
+
+@node Boot it!
+@section Boot it!
+@anchor{#boot-it}
+You should see something like this:
+
+@image{../resources/images/x200/disassembly/0019,,,,jpg}
+
+Now @uref{../gnulinux/index.html,install GNU/Linux}.
+
+@node X200S and X200 Tablet users GPIO33 trick will not work
+@section X200S and X200 Tablet users: GPIO33 trick will not work.
+@anchor{#x200s-and-x200-tablet-users-gpio33-trick-will-not-work.}
+sgsit found out about a pin called GPIO33, which can be grounded to disable the flashing protections by the descriptor and stop the ME from starting (which itself interferes with flashing attempts). The theory was proven correct; however, it is still useless in practise.
+
+Look just above the 7 in TP37 (that's GPIO33):@* @image{../hcl/../resources/images/x200/gpio33_location,,,,jpg}
+
+By default we would see this in lenovobios, when trying flashrom -p internal -w rom.rom:
+
+@verbatim
+FREG0: Warning: Flash Descriptor region (0x00000000-0x00000fff) is read-only.
+FREG2: Warning: Management Engine region (0x00001000-0x005f5fff) is locked.
+@end verbatim
+
+With GPIO33 grounded during boot, this disabled the flash protections as set by descriptor, and stopped the ME from starting. The output changed to:
+
+@verbatim
+The Flash Descriptor Override Strap-Pin is set. Restrictions implied by
+the Master Section of the flash descriptor are NOT in effect. Please note
+that Protected Range (PR) restrictions still apply.
+@end verbatim
+
+The part in bold is what got us. This was still observed:
+
+@verbatim
+PR0: Warning: 0x007e0000-0x01ffffff is read-only.
+PR4: Warning: 0x005f8000-0x005fffff is locked.
+@end verbatim
+
+It is actually possible to disable these protections. Lenovobios does, when updating the BIOS (proprietary one). One possible way to go about this would be to debug the BIOS update utility from Lenovo, to find out how it's disabling these protections. Some more research is available here: @uref{http://www.coreboot.org/Board:lenovo/x200/internal_flashing_research,http://www.coreboot.org/Board:lenovo/x200/internal_flashing_research}
+
+On a related note, libreboot has a utility that could help with investigating this: @uref{../hcl/gm45_remove_me.html#demefactory,../hcl/gm45_remove_me.html#demefactory}
+
+Copyright © 2014, 2015 Francis Rowe <info@@gluglug.org.uk>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/install/x60_unbrick.texi b/docs/src/install/x60_unbrick.texi
new file mode 100644
index 0000000..e70e56c
--- /dev/null
+++ b/docs/src/install/x60_unbrick.texi
@@ -0,0 +1,164 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title ThinkPad X60: Recovery guide
+@end titlepage
+
+@node Top
+@top ThinkPad X60: Recovery guide
+
+@menu
+* ThinkPad X60 Recovery guide::
+* Table of Contents::
+* Brick type 1 bucts not reset::
+* bad rom or user error system won't boot::
+@end menu
+
+@node ThinkPad X60 Recovery guide
+@chapter ThinkPad X60: Recovery guide
+@anchor{#thinkpad-x60-recovery-guide}
+This section documents how to recover from a bad flash that prevents your ThinkPad X60 from booting.
+
+@uref{index.html,Back to previous index}
+
+@node Table of Contents
+@chapter Table of Contents
+@anchor{#table-of-contents}
+@itemize
+@item
+Types of brick:
+@itemize
+@item
+@ref{#bucts_brick,Brick type 1: bucts not reset}
+@item
+@ref{#recovery,Brick type 2: bad rom (or user error), system won't boot}
+@end itemize
+
+@end itemize
+
+@node Brick type 1 bucts not reset
+@chapter Brick type 1: bucts not reset.
+@anchor{#brick-type-1-bucts-not-reset.}
+You still have Lenovo BIOS, or you had libreboot running and you flashed another ROM; and you had bucts 1 set and the ROM wasn't dd'd.* or if Lenovo BIOS was present and libreboot wasn't flashed.@*@* In this case, unbricking is easy: reset BUC.TS to 0 by removing that yellow cmos coin (it's a battery) and putting it back after a minute or two:@* @image{../resources/images/x60_unbrick/0004,,,,jpg}@*@* *Those dd commands should be applied to all newly compiled X60 ROM images (the ROM images in libreboot binary archives already have this applied!):@* dd if=coreboot.rom of=top64k.bin bs=1 skip=$[$(stat -c %s coreboot.rom) - 0x10000] count=64k@* dd if=coreboot.rom bs=1 skip=$[$(stat -c %s coreboot.rom) - 0x20000] count=64k | hexdump@* dd if=top64k.bin of=coreboot.rom bs=1 seek=$[$(stat -c %s coreboot.rom) - 0x20000] count=64k conv=notrunc@* (doing this makes the ROM suitable for use when flashing a system that still has Lenovo BIOS running, using those instructions: @uref{http://www.coreboot.org/Board:lenovo/x60/Installation,http://www.coreboot.org/Board:lenovo/x60/Installation}.
+
+@node bad rom or user error system won't boot
+@chapter bad rom (or user error), system won't boot
+@anchor{#bad-rom-or-user-error-system-wont-boot}
+In this scenario, you compiled a ROM that had an incorrect configuration, or there is an actual bug preventing your system from booting. Or, maybe, you set BUC.TS to 0 and shut down after first flash while Lenovo BIOS was running. In any case, your system is bricked and will not boot at all.
+
+"Unbricking" means flashing a known-good (working) ROM. The problem: you can't boot the system, making this difficult. In this situation, external hardware (see hardware requirements above) is needed which can flash the SPI chip (where libreboot resides).
+
+Remove those screws:@* @image{../resources/images/x60_unbrick/0000,,,,jpg}
+
+Push the keyboard forward (carefully):@* @image{../resources/images/x60_unbrick/0001,,,,jpg}
+
+Lift the keyboard up and disconnect it from the board:@* @image{../resources/images/x60_unbrick/0002,,,,jpg}
+
+Grab the right-hand side of the chassis and force it off (gently) and pry up the rest of the chassis:@* @image{../resources/images/x60_unbrick/0003,,,,jpg}
+
+You should now have this:@* @image{../resources/images/x60_unbrick/0004,,,,jpg}
+
+Disconnect the wifi antenna cables, the modem cable and the speaker:@* @image{../resources/images/x60_unbrick/0005,,,,jpg}
+
+Unroute the cables along their path, carefully lifting the tape that holds them in place. Then, disconnect the modem cable (other end) and power connection and unroute all the cables so that they dangle by the monitor hinge on the right-hand side:@* @image{../resources/images/x60_unbrick/0006,,,,jpg}
+
+Disconnect the monitor from the motherboard, and unroute the grey antenna cable, carefully lifting the tape that holds it into place:@* @image{../resources/images/x60_unbrick/0008,,,,jpg}
+
+Carefully lift the remaining tape and unroute the left antenna cable so that it is loose:@* @image{../resources/images/x60_unbrick/0009,,,,jpg}
+
+Remove the screw that is highlighted (do NOT remove the other one; it holds part of the heatsink (other side) into place):@* @image{../resources/images/x60_unbrick/0011,,,,jpg}
+
+Remove those screws:@* @image{../resources/images/x60_unbrick/0012,,,,jpg}
+
+Carefully remove the plate, like so:@* @image{../resources/images/x60_unbrick/0013,,,,jpg}
+
+Remove the SATA connector:@* @image{../resources/images/x60_unbrick/0014,,,,jpg}
+
+Now remove the motherboard (gently) and cast the lcd/chassis aside:@* @image{../resources/images/x60_unbrick/0015,,,,jpg}
+
+Lift back that tape and hold it with something. Highlighted is the SPI flash chip:@* @image{../resources/images/x60_unbrick/0016,,,,jpg}
+
+Now wire up the BBB and the Pomona with your PSU.@* Refer to @uref{bbb_setup.html,bbb_setup.html} for how to setup the BBB for flashing.@* @strong{Note, the guide mentions a 3.3v DC PSU but you don't need this on the X60: if you don't have or don't want to use an external PSU, then make sure not to connect the 3.3v leads mentioned in the guide; instead, connect the AC adapter (the one that normally charges your battery) so that the board has power (but don't boot it up)} @image{../resources/images/x60_unbrick/0017,,,,jpg}@* Correlate the following with the BBB guide linked above:
+
+@verbatim
+POMONA 5250:
+=== golden finger and wifi switch ====
+ 18 - - 1
+ 22 - - NC ---------- audio jacks are on this end
+ NC - - 21
+ 3.3V (PSU) - - 17 - this is pin 1 on the flash chip
+=== CPU fan ===
+This is how you will connect. Numbers refer to pin numbers on the BBB, on the plugs near the DC jack.
+@end verbatim
+
+Connecting the BBB and pomona (in this image, an external 3.3v DC PSU was used):@* @image{../resources/images/x60/th_bbb_flashing,,,,jpg}
+
+Flashrom binaries for ARM (tested on a BBB) are distributed in libreboot_util. Alternatively, libreboot also distributes flashrom source code which can be built.
+
+SSH'd into the BBB:@* # @strong{./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w yourrom.rom}
+
+It should be @strong{Verifying flash... VERIFIED} at the end. If flashrom complains about multiple flash chip definitions detected, then choose one of them following the instructions in the output.
+
+Remove the programmer and put it away somewhere. Put back the tape and press firmly over it:@* @image{../resources/images/x60_unbrick/0026,,,,jpg}
+
+Your empty chassis:@* @image{../resources/images/x60_unbrick/0027,,,,jpg}
+
+Put the motherboard back in:@* @image{../resources/images/x60_unbrick/0028,,,,jpg}
+
+Reconnect SATA:@* @image{../resources/images/x60_unbrick/0029,,,,jpg}
+
+Put the plate back and re-insert those screws:@* @image{../resources/images/x60_unbrick/0030,,,,jpg}
+
+Re-route that antenna cable around the fan and apply the tape:@* @image{../resources/images/x60_unbrick/0031,,,,jpg}
+
+Route the cable here and then (not shown, due to error on my part) reconnect the monitor cable to the motherboard and re-insert the screws:@* @image{../resources/images/x60_unbrick/0032,,,,jpg}
+
+Re-insert that screw:@* @image{../resources/images/x60_unbrick/0033,,,,jpg}
+
+Route the black antenna cable like so:@* @image{../resources/images/x60_unbrick/0034,,,,jpg}
+
+Tuck it in neatly like so:@* @image{../resources/images/x60_unbrick/0035,,,,jpg}
+
+Route the modem cable like so:@* @image{../resources/images/x60_unbrick/0036,,,,jpg}
+
+Connect modem cable to board and tuck it in neatly like so:@* @image{../resources/images/x60_unbrick/0037,,,,jpg}
+
+Route the power connection and connect it to the board like so:@* @image{../resources/images/x60_unbrick/0038,,,,jpg}
+
+Route the antenna and modem cables neatly like so:@* @image{../resources/images/x60_unbrick/0039,,,,jpg}
+
+Connect the wifi antenna cables. At the start of the tutorial, this system had an Intel wifi chip. Here you see I've replaced it with an Atheros AR5B95 (supports 802.11n and can be used without blobs):@* @image{../resources/images/x60_unbrick/0040,,,,jpg}
+
+Connect the modem cable:@* @image{../resources/images/x60_unbrick/0041,,,,jpg}
+
+Connect the speaker:@* @image{../resources/images/x60_unbrick/0042,,,,jpg}
+
+You should now have this:@* @image{../resources/images/x60_unbrick/0043,,,,jpg}
+
+Re-connect the upper chassis:@* @image{../resources/images/x60_unbrick/0044,,,,jpg}
+
+Re-connect the keyboard:@* @image{../resources/images/x60_unbrick/0045,,,,jpg}
+
+Re-insert the screws that you removed earlier:@* @image{../resources/images/x60_unbrick/0046,,,,jpg}
+
+Power on!@* @image{../resources/images/x60_unbrick/0047,,,,jpg}
+
+Trisquel live USB menu (using the GRUB ISOLINUX parser):@* @image{../resources/images/x60_unbrick/0048,,,,jpg}
+
+Trisquel live desktop:@* @image{../resources/images/x60_unbrick/0049,,,,jpg}
+
+Copyright © 2014, 2015 Francis Rowe <info@@gluglug.org.uk>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/install/x60tablet_unbrick.texi b/docs/src/install/x60tablet_unbrick.texi
new file mode 100644
index 0000000..90e19ce
--- /dev/null
+++ b/docs/src/install/x60tablet_unbrick.texi
@@ -0,0 +1,112 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title ThinkPad X60 Tablet: Recovery guide
+@end titlepage
+
+@node Top
+@top ThinkPad X60 Tablet: Recovery guide
+
+@menu
+* ThinkPad X60 Tablet Recovery guide::
+* Brick type 1 bucts not reset::
+* bad rom or user error system won't boot::
+@end menu
+
+@node ThinkPad X60 Tablet Recovery guide
+@chapter ThinkPad X60 Tablet: Recovery guide
+@anchor{#thinkpad-x60-tablet-recovery-guide}
+This section documents how to recover from a bad flash that prevents your ThinkPad X60 Tablet from booting.
+
+@uref{index.html,Back to previous index}
+@menu
+* Table of Contents::
+@end menu
+
+@node Table of Contents
+@section Table of Contents
+@anchor{#table-of-contents}
+@itemize
+@item
+Types of brick:
+@itemize
+@item
+@ref{#bucts_brick,Brick type 1: bucts not reset}
+@item
+@ref{#recovery,Brick type 2: bad rom (or user error), system won't boot}
+@end itemize
+
+@end itemize
+
+@node Brick type 1 bucts not reset
+@chapter Brick type 1: bucts not reset.
+@anchor{#brick-type-1-bucts-not-reset.}
+You still have Lenovo BIOS, or you had libreboot running and you flashed another ROM; and you had bucts 1 set and the ROM wasn't dd'd.* or if Lenovo BIOS was present and libreboot wasn't flashed.@*@* In this case, unbricking is easy: reset BUC.TS to 0 by removing that yellow cmos coin (it's a battery) and putting it back after a minute or two:@* @image{../resources/images/x60t_unbrick/0008,,,,JPG}@*@* *Those dd commands should be applied to all newly compiled X60 ROM images (the ROM images in libreboot binary archives already have this applied!):@* dd if=coreboot.rom of=top64k.bin bs=1 skip=$[$(stat -c %s coreboot.rom) - 0x10000] count=64k@* dd if=coreboot.rom bs=1 skip=$[$(stat -c %s coreboot.rom) - 0x20000] count=64k | hexdump@* dd if=top64k.bin of=coreboot.rom bs=1 seek=$[$(stat -c %s coreboot.rom) - 0x20000] count=64k conv=notrunc@* (doing this makes the ROM suitable for use when flashing a system that still has Lenovo BIOS running, using those instructions: @uref{http://www.coreboot.org/Board:lenovo/x60/Installation,http://www.coreboot.org/Board:lenovo/x60/Installation}.
+
+@node bad rom or user error system won't boot
+@chapter bad rom (or user error), system won't boot
+@anchor{#bad-rom-or-user-error-system-wont-boot}
+In this scenario, you compiled a ROM that had an incorrect configuration, or there is an actual bug preventing your system from booting. Or, maybe, you set BUC.TS to 0 and shut down after first flash while Lenovo BIOS was running. In any case, your system is bricked and will not boot at all.
+
+"Unbricking" means flashing a known-good (working) ROM. The problem: you can't boot the system, making this difficult. In this situation, external hardware (see hardware requirements above) is needed which can flash the SPI chip (where libreboot resides).
+
+@image{../resources/images/x60t_unbrick/0000,,,,JPG}
+
+Remove those screws:@* @image{../resources/images/x60t_unbrick/0001,,,,JPG}
+
+Remove the HDD:@* @image{../resources/images/x60t_unbrick/0002,,,,JPG}
+
+Push keyboard forward to loosen it:@* @image{../resources/images/x60t_unbrick/0003,,,,JPG}
+
+Lift:@* @image{../resources/images/x60t_unbrick/0004,,,,JPG}
+
+Remove those:@* @image{../resources/images/x60t_unbrick/0005,,,,JPG}
+
+@image{../resources/images/x60t_unbrick/0006,,,,JPG}
+
+Also remove that (marked) and unroute the antenna cables:@* @image{../resources/images/x60t_unbrick/0007,,,,JPG}
+
+For some X60T laptops, you have to unroute those too:@* @image{../resources/images/x60t_unbrick/0010,,,,JPG}
+
+Remove the LCD extend board screws. Also remove those screws (see blue marks) and remove/unroute the cables and remove the metal plate:@* @image{../resources/images/x60t_unbrick/0008,,,,JPG}
+
+Remove that screw and then remove the board:@* @image{../resources/images/x60t_unbrick/0009,,,,JPG}
+
+Now wire up the BBB and the Pomona with your PSU.@* Refer to @uref{bbb_setup.html,bbb_setup.html} for how to setup the BBB for flashing.@* @strong{Note, the guide mentions a 3.3v DC PSU but you don't need this on the X60 Tablet: if you don't have or don't want to use an external PSU, then make sure not to connect the 3.3v leads mentioned in the guide; instead, connect the AC adapter (the one that normally charges your battery) so that the board has power (but don't boot it up)} @image{../resources/images/x60t_unbrick/0011,,,,JPG}@* Correlate the following with the BBB guide linked above:
+
+@verbatim
+POMONA 5250:
+=== golden finger and wifi switch ====
+ 18 - - 1
+ 22 - - NC ---------- audio jacks are on this end
+ NC - - 21
+ 3.3V (PSU) - - 17 - this is pin 1 on the flash chip
+=== CPU fan ===
+This is how you will connect. Numbers refer to pin numbers on the BBB, on the plugs near the DC jack.
+@end verbatim
+
+Connecting the BBB and pomona (in this image, an external 3.3v DC PSU was used):@* @image{../resources/images/x60/th_bbb_flashing,,,,jpg}
+
+Flashrom binaries for ARM (tested on a BBB) are distributed in libreboot_util. Alternatively, libreboot also distributes flashrom source code which can be built.
+
+SSH'd into the BBB:@* # @strong{./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w yourrom.rom}
+
+It should be @strong{Verifying flash... VERIFIED} at the end. If flashrom complains about multiple flash chip definitions detected, then choose one of them following the instructions in the output.
+
+Reverse the steps to re-assemble your system.
+
+Copyright © 2014, 2015 Francis Rowe <info@@gluglug.org.uk>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/maintain/index.texi b/docs/src/maintain/index.texi
new file mode 100644
index 0000000..e68adfa
--- /dev/null
+++ b/docs/src/maintain/index.texi
@@ -0,0 +1,315 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title Maintaining libreboot
+@end titlepage
+
+@node Top
+@top Maintaining libreboot
+
+@menu
+* Maintaining libreboot::
+* Overview::
+* Updating coreboot-libre::
+* Adding a new board to libreboot::
+* Add/remove/modify patches in coreboot-libre::
+* Updating GRUB::
+* Change how the GRUB payload grubelf is built utility grub-assemble::
+* Modify the configuration used in GRUB::
+* Updating depthcharge::
+* Updating flashrom::
+* Updating bucts::
+* Updating MemTest86+::
+* SeaBIOS::
+@end menu
+
+@node Maintaining libreboot
+@chapter Maintaining libreboot
+@anchor{#maintaining-libreboot}
+This section relates to maintaining libreboot.
+
+Do not follow anything here to the letter; is it only a rough guide representing how libreboot is maintained (for reference).
+
+This section of the documentation applies mainly to the development version of libreboot, which is hosted in a git repository. It is not intended for the release versions of libreboot.
+
+@itemize
+@item
+@ref{#overview,Overview}
+@item
+@ref{#updating_coreboot,Updating coreboot-libre}
+@itemize
+@item
+@ref{#newboard_libreboot,Adding a new board to libreboot}
+@item
+@ref{#newpatch_libreboot,Add/remove/modify patches in coreboot-libre}
+@end itemize
+
+@item
+@ref{#updating_grub,Updating GRUB}
+@itemize
+@item
+@ref{#altbuild_grub_payload,Change how the GRUB payload (grub.elf) is built (utility: grub-assemble)}
+@item
+@ref{#newconfig_grub,Modify the configuration used in GRUB}
+@item
+@uref{../grub/index.html,Other maintenance-related tasks in GRUB}
+@end itemize
+
+@item
+@ref{#updating_depthcharge,Updating depthcharge}
+@item
+@ref{#updating_flashrom,Updating flashrom}
+@item
+@ref{#updating_bucts,Updating bucts}
+@item
+@ref{#updating_memtest86plus,Updating MemTest86+}
+@item
+@ref{#seabios,SeaBIOS}
+@end itemize
+
+Or @uref{../index.html,Back to main index}.
+
+@node Overview
+@chapter Overview
+@anchor{#overview}
+The way the libreboot project is run is very similar to how a GNU/Linux distribution project is run (but for the boot firmware, not your operating system). Thus, libreboot is a @emph{coreboot distribution}.
+
+This page demonstrates on a high level how libreboot is maintained, how the project is run, how everything goes together, etc. For a more detailed guide, refer to each subsection for the various components/modules used in libreboot.
+
+@ref{#pagetop,Back to top of page}.
+
+@node Updating coreboot-libre
+@chapter Updating coreboot-libre
+@anchor{#updating-coreboot-libre}
+NOTE: it helps to own all libreboot-compatible systems here, or have reliable (and fast) access to a team of testers.
+
+Coreboot-libre is the name of the deblobbed coreboot sources used in libreboot. It is also the name of the collection of scripts used for deblobbing coreboot, on each new update.
+
+This section shows an example of how to update (re-base) to the latest version of coreboot, how to update the deblobbing scripts, and so on. @strong{This does not teach you how to change what custom patches are used, nor does it tell you how to add new boards to libreboot. It assumes that you simply want to re-base to the latest version (for instance, there could be bug fixes that you want). For those things not listed in this section, you can refer to other sections on this page instead.}
+
+Open these files in your editor (you will most likely be editing them):
+
+@itemize
+@item
+resources/scripts/helpers/download/coreboot
+@item
+resources/scripts/helpers/build/module/coreboot
+@item
+resources/utilities/coreboot-libre/deblob
+@item
+resources/utilities/coreboot-libre/nonblobs
+@item
+resources/utilities/coreboot-libre/nonblobs_notes
+@item
+resources/scripts/helpers/build/roms/helper
+@item
+resources/scripts/helpers/build/roms/withgrub
+@end itemize
+
+If you already had a coreboot/ directory in your libreboot tree, delete it:@* $ @strong{rm -Rf coreboot/}
+
+Firstly, download coreboot. Do @strong{not} use @strong{./download coreboot} for this, just clone coreboot, as it does in that script, like so:@* $ @strong{git clone http://review.coreboot.org/coreboot}
+
+$ @strong{cd coreboot/}@* Get the ID of the latest commit in this clone, by reading the commit ID using e.g.:@* $ @strong{git log}@* In @emph{resources/scripts/helpers/download/coreboot} you will find a line that says @emph{@strong{git reset --hard}} and then a commit ID next to it. Replace this with the commit ID of the latest commit from the coreboot version that you just downloaded.
+
+You must also checkout the @emph{vboot} submodule:@* $ @strong{git submodule update --init --checkout -- 3rdparty/vboot/}
+
+Delete the .git* resources. For example:@* $ @strong{rm -Rf .git* 3rdparty/*/.git*}@* ...this is to avoid the deblobbing script from picking up files in there as blobs, which would be only false positives and increase the amount of time taken. Now come out of coreboot:@* $ @strong{cd ../}
+
+Check all coreboot file names/paths in @emph{deblob}; if any of them no longer exist at that name/path in the coreboot tree that you downloaded, delete the reference(s) in @emph{deblob}.
+
+Check all coreboot file names/paths in @emph{nonblobs}; if any of them no longer exist at that name/path in the coreboot tree that you downloaded, delete the reference in @emph{nonblobs}.
+
+Now, back in the main root directory of libreboot (git repository), run the deblob script. This is to prevent the @emph{findblobs} scripts from finding the blobs that are already deleted when running the @emph{deblob} script. Like so:@* $ @strong{./resources/utilities/coreboot-libre/deblob}
+
+Now search for new blobs:@* $ @strong{cd resources/utilities/coreboot-libre/}@* $ @strong{./findblobs}@* WARNING: this will take a @strong{*long*} time. Be patient! What this will do is look through the coreboot source directory, looking for blobs. It will not find the blobs that you deleted before (because they no longer exist), and it will ignore any files listed in @emph{nonblobs}.
+
+Once the @emph{findblobs} script has finished, check the file @emph{tocheck} (from the root, this will be @emph{resources/utilities/coreboot-libre/tocheck}). These are the files detected as blobs; some might be blobs, some not. The @emph{findblobs} script doesn't know how to determine between blobs and non-blobs, it only knows patterns. Distinguishing between blobs and non-blobs must be performed by you, the human being.
+
+@itemize
+@item
+Files in @emph{tocheck} that you identify as blobs, should be added appropriately to @emph{resources/utilities/coreboot-libre/deblob}
+@item
+Files in @emph{tocheck} that you identify as non-blobs, should be added appropriately to @emph{resources/utilities/coreboot-libre/nonblobs} - also, if you feel it necessary, add an explanation of it in @emph{resources/utilities/coreboot-libre/nonblobs_notes}
+@end itemize
+
+Now come back to the main libreboot root directory (root of the git clone). If you are still in resources/utilities/coreboot-libre/ for instance, you would do something like:@* $ @strong{cd ../../../}
+
+Now delete the coreboot directory:@* $ @strong{rm -Rf coreboot/}
+
+Download coreboot again, only this time, using the download script. The download script also applies custom patches to coreboot (see resources/scripts/helpers/download/coreboot); if they do not apply anymore, you will have to re-base them and then update @emph{resources/scripts/helpers/download/coreboot} accordingly. Anyway, download coreboot like so:@* $ @strong{./download coreboot}
+
+If the custom patches no longer apply, and you have to re-base (or replace?) some patches, please do this in coreboot upstream, not in libreboot. Then re-include new patches from upstream, into libreboot. Here is coreboot's guide for contributing patches:@* @uref{http://www.coreboot.org/Git,http://www.coreboot.org/Git}.
+
+Update all configs:@* $ @strong{./build config grubupdate}@* $ @strong{./build config dcupdate}@* This simply takes all of the coreboot @strong{.config} files from @emph{resources/libreboot/config/} and does @strong{make oldconfig} on them. It usually works. If it doesn't, you'll need to recreate those configs from scratch using @strong{./build config grubreplace} or @strong{./build config dcreplace} (optionally add a config name), or @strong{./build config grubmodify} or @strong{./build config dcmodify} (ditto) (see @uref{../git/index.html#config,../git/index.html#config})
+
+Finally, build *all* ROM images using the instructions at @uref{../git/index.html,../git/index.html}, to verify that everything still builds.
+
+Once you've verified that building isn't broken, test *all* boards (you don't need to test all ROM images, only one vesafb and one txtmode image for each configuration). If you do not have all systems supported in libreboot, then you will need to get other testers for those boards.
+
+If you have established a build issue, or a board no longer works (booting issues, bugs during/after boot, etc), you'll need to fix it upstream: @uref{http://www.coreboot.org/Git,http://www.coreboot.org/Git} and then re-update coreboot (or apply patches from upstream).
+
+You should also test the resulting ROM images from building with the new or modified coreboot revision.
+
+@ref{#pagetop,Back to top of page}.
+
+@node Adding a new board to libreboot
+@chapter Adding a new board to libreboot
+@anchor{#adding-a-new-board-to-libreboot}
+Make sure that the board is supported, and that the patches are included (if there are custom patches that you need). Add configs for it like so (for GRUB payload):@* $ @strong{./build config grubreplace @emph{payload}/@emph{boardname}}@* Alternatively, for depthcharge payload:@* $ @strong{./build config dcreplace @emph{payload}/@emph{boardname}}
+
+This can also be used for replacing an existing config.
+
+Configure the board. Make sure to add the steps to the config section in @uref{../git/index.html,../git/index.html}.
+
+When you're done, the config will be stored in @emph{resources/libreboot/config/}. Now build-test it and then check that it actually works.
+
+The following scripts may also need to be modified before building: @emph{resources/scripts/helpers/build/roms/withgrub} and @emph{resources/scripts/helpers/build/roms/helper}
+
+The following can be used when updating coreboot-libre (GRUB payload):@* $ @strong{./build config grubupdate}@* You must also do this for boards that use the depthcharge payload:@* $ @strong{./build config dcupdate}@* (adding a board name on the end is optional, for either of these)
+
+The following can be used if you want to modify an existing configuration (GRUB payload):@* $ @strong{./build config grubmodify}@* For those boards which use the depthcharge payload:@* $ @strong{./build config dcmodify}@* (adding a board name on the end is optional)
+
+Examples (GRUB payload):@* $ @strong{./build config grubmodify x60}@* $ @strong{./build config grubreplace x60}@* $ @strong{./build config grubupdate x60}@* $ @strong{./build config grubmodify kfsn4-dre}@* $ @strong{./build config grubreplace kfsn4-dre}@* $ @strong{./build config grubupdate kfsn4-dre}@*
+
+Examples (depthcharge payload):@* $ @strong{./build config dcmodify veyron_speedy}@* $ @strong{./build config dcreplace veyron_speedy}@* $ @strong{./build config dcupdate veyron_speedy}
+
+@ref{#pagetop,Back to top of page}.
+
+@node Add/remove/modify patches in coreboot-libre
+@chapter Add/remove/modify patches in coreboot-libre
+@anchor{#addremovemodify-patches-in-coreboot-libre}
+Under @strong{resources/scripts/helpers/download/coreboot} you can find the instructions used for patching coreboot.
+
+Modify the commit ID on the @emph{git reset --hard} line accordingly, and update the list of patches used accordingly. Do not cherry-pick from review.coreboot.org directly; instead, include the diff in resources/libreboot/patch/ and use @emph{git am} (you can get the diff by using git-format-patch).
+
+When you're done, simply download coreboot again:@* $ @strong{./download coreboot}
+
+Finally, re-build the parts from coreboot that are used by the build system (also builds GCC):@* $ @strong{./build module coreboot}
+
+Before running the above command, you can save time by copying out the crossgcc that you compiled before (from coreboot/util/crossgcc/) and then putting it back. After you've done that, run everything in @emph{resources/scripts/helpers/build/module/coreboot} except for the part that builds GCC. @strong{Only do this if the version is correct.}
+
+You should also test the resulting ROM images from building with the new or modified coreboot revision.
+
+@ref{#pagetop,Back to top of page}.
+
+@node Updating GRUB
+@chapter Updating GRUB
+@anchor{#updating-grub}
+$ @strong{rm -Rf grub/}@* $ @strong{git clone git://git.savannah.gnu.org/grub.git}@* $ @strong{cd grub/}@* $ @strong{git log}
+
+Open the file @emph{resources/scripts/helpers/download/grub} and replace the commit ID on the line that performs @emph{git reset --hard} with the commit ID of the GRUB revision that you just downloaded.
+
+$ @strong{cd ../}@* $ @strong{./download grub}
+
+If it fails because of merge conflicts, you'll need to re-base or (as appropriate) remove the offending patch(es) in @emph{resources/scripts/helpers/download/grub}.
+
+Finally, verify that it will build:@* $ @strong{./build module grub}
+
+Since GRUB is the payload in libreboot, you should also build the ROM images and test them, with this different GRUB version that you have prepared.
+
+@ref{#pagetop,Back to top of page}.
+
+@node Change how the GRUB payload grubelf is built utility grub-assemble
+@chapter Change how the GRUB payload (grub.elf) is built (utility: grub-assemble)
+@anchor{#change-how-the-grub-payload-grub.elf-is-built-utility-grub-assemble}
+Look in @emph{resources/utilities/grub-assemble/}.
+
+@emph{gen.sh} creates ELF executables of GRUB with different configurations: text-mode or framebuffer mode in coreboot. Essentially, the text-mode version has no background nor any custom fonts, and contains MemTest86+. You probably don't need to modify these files at all.
+
+@emph{modules.conf} defines which modules will be included in the GRUB ELF executable.
+
+Since GRUB is the payload in libreboot, you should also build the ROM images and test them, with this different GRUB version that you have prepared.
+
+@ref{#pagetop,Back to top of page}.
+
+@node Modify the configuration used in GRUB
+@chapter Modify the configuration used in GRUB
+@anchor{#modify-the-configuration-used-in-grub}
+Look in @emph{resources/scripts/helpers/build/roms/withgrub} to see how the GRUB configuration files are generated.
+
+You might need to modify this. You can also modify the default configuration by making changes to the files under @emph{resources/grub/config/}
+
+Since GRUB is the payload in libreboot, you should also build the ROM images and test them, with this different GRUB version that you have prepared.
+
+@ref{#pagetop,Back to top of page}.
+
+@node Updating depthcharge
+@chapter Updating depthcharge
+@anchor{#updating-depthcharge}
+The script to download depthcharge is: @emph{resources/scripts/helpers/download/depthcharge}.
+
+Patches are in @emph{resources/depthcharge/patch/}.
+
+The configuration used for depthcharge is located in @emph{depthcharge/board}. Each board has a @emph{defconfig} Kconfig configuration and a fmap.dts FMAP device-tree configuration. Those shouldn't need much attention, but when needed, it's best to modify them in the depthcharge tree (with patches) to keep things in one place.
+
+@ref{#pagetop,Back to top of page}.
+
+@node Updating flashrom
+@chapter Updating flashrom
+@anchor{#updating-flashrom}
+Modify these files: @emph{resources/scripts/helpers/download/flashrom} and @emph{resources/scripts/helpers/build/module/flashrom}.
+
+Patches are in @emph{resources/flashrom/patch/}
+
+@ref{#pagetop,Back to top of page}.
+
+@node Updating bucts
+@chapter Updating bucts
+@anchor{#updating-bucts}
+bucts doesn't really need updating, but the patches are in @emph{resources/bucts/patch}, the download script is @emph{resources/scripts/helpers/download/bucts} and the build script is @emph{resources/scripts/helpers/build/module/bucts}.
+
+@ref{#pagetop,Back to top of page}.
+
+@node Updating MemTest86+
+@chapter Updating MemTest86+
+@anchor{#updating-memtest86}
+MemTest86+ doesn't really need updating, but the patches are in @emph{resources/memtest86plus/patch}, the download script is @emph{resources/scripts/helpers/download/memtest86plus} and the build script is @emph{resources/scripts/helpers/build/module/memtest86plus}.
+
+In the download script for memtest86plus, make sure to update the checksum that it matches for the downloaded source tarball.
+
+@ref{#pagetop,Back to top of page}.
+
+@node SeaBIOS
+@chapter SeaBIOS
+@anchor{#seabios}
+Create the SeaBIOS config like so (changed from defaults):@* $ @strong{./build config seabiosmodify}
+
+@verbatim
+General Features -> Build Target -> Build for coreboot (enable)
+VGA ROM -> VGA Hardware Type -> coreboot linear framebuffer (enable)
+Debugging -> Serial port debugging (enable)
+@end verbatim
+
+When updating SeaBIOS, run the following:@* $ @strong{./build config seabiosupdate}@* (this will run @strong{make oldconfig} on seabios)
+
+Relevant scripts:
+
+@itemize
+@item
+resources/scripts/helpers/build/config/seabiosmodify
+@item
+resources/scripts/helpers/build/config/seabiosupdate
+@item
+resources/scripts/helpers/download/seabios (change patches used, revision, etc)
+@item
+resources/scripts/helpers/build/clean/seabios
+@item
+resources/scripts/helpers/build/module/seabios
+@end itemize
+
+Copyright © 2015 Francis Rowe <info@@gluglug.org.uk>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/misc/index.texi b/docs/src/misc/index.texi
new file mode 100644
index 0000000..75d6d7f
--- /dev/null
+++ b/docs/src/misc/index.texi
@@ -0,0 +1,156 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title Miscellaneous
+@end titlepage
+
+@node Top
+@top Miscellaneous
+
+@menu
+* Miscellaneous::
+* High Pitched hining Noise on Idle ho to remove in Trisquel 7::
+* High Pitched hining Noise on Idle ho to remove in Parabola::
+* X60/T60 Serial port - ho to use for dock oners::
+* Poer Management Beeps on Thinkpads::
+* Get EDID Find out the name model of your LCD panel::
+@end menu
+
+@node Miscellaneous
+@chapter Miscellaneous
+@anchor{#miscellaneous}
+Or @uref{../index.html,Back to main index}.
+
+@itemize
+@item
+@ref{#trisquel7_poertop,High Pitched hining Noise on Idle (ho to remove in Trisquel 7)}
+@item
+@ref{#high_pitch_parabola,High Pitched hining Noise on Idle (ho to remove in Parabola)}
+@item
+@ref{#serial,X60/T60: Serial port - ho to use (for dock oners)}
+@item
+@ref{#poerbeeps,Poer Management Beeps on Thinkpads}
+@item
+@uref{patch.html,Using diff and patch}
+@item
+@ref{#get_edid_panelname,Get EDID: Find out the name (model) of your LCD panel}
+@end itemize
+
+@node High Pitched hining Noise on Idle ho to remove in Trisquel 7
+@chapter High Pitched hining Noise on Idle (ho to remove in Trisquel 7)
+@anchor{#high-pitched-hining-noise-on-idle-ho-to-remove-in-trisquel-7}
+@menu
+* Start poertop automatically at boot time::
+@end menu
+
+@node Start poertop automatically at boot time
+@section Start poertop automatically at boot time
+@anchor{#start-poertop-automatically-at-boot-time}
+Included ith libreboot is a script called 'poertop.trisquel7'. Run this as root and it ill setup poertop to run ith --auto-tune at boot time. Load the file in your text editor to see ho it does that.
+
+$ @strong{sudo ./resources/scripts/misc/poertop.trisquel7}
+
+Might ant to run ith --calibrate first
+
+If poertop doesn't ork, another ay (reduces battery life slightly) is to add @emph{processor.max_cstate=2} to the @emph{linux} line in grub.cfg, using @uref{../gnulinux/grub_cbfs.html,this guide}.
+
+@ref{#pagetop,Back to top of page}
+
+@node High Pitched hining Noise on Idle ho to remove in Parabola
+@chapter High Pitched hining Noise on Idle (ho to remove in Parabola)
+@anchor{#high-pitched-hining-noise-on-idle-ho-to-remove-in-parabola}
+The folloing removes most of the noise. It reduces hat is a high frequency hine (that not everyone can hear) to a slight buzz (hich most people can't hear or doesn't bother most people).
+
+This is not perfect! The full solution is still not discovered but this is a step toards that. Also, in some instances you ill need to run 'sudo poertop --auto-tune' again. This needs to be implemented properly in coreboot itself!
+
+On the X60 ith coreboot or libreboot, there is a high pitched sound hen idle. So far e have use processor.max_cstate=2 or idle=halt in GRUB. These consume poer. Stop using them!
+
+Be root@* @strong{$ su -}
+
+Installed poertop:@* @strong{# pacman -S poertop}
+
+and added the folloing to /etc/systemd/system/poertop.service :
+
+@verbatim
+[Unit]
+Description=Poertop tunings
+
+[Service]
+Type=oneshot
+RemainAfterExit=no
+ExecStart=/usr/bin/poertop --auto-tune
+# "poertop --auto-tune" still needs a terminal for some reason. Possibly a bug?
+Environment="TERM=xterm"
+
+[Install]
+antedBy=multi-user.target
+@end verbatim
+
+Finally, as root do that:@* @strong{# systemctl enable poertop}@* @strong{# systemctl start poertop}
+
+The next time you boot the system, the buzz ill be gone.
+
+Might ant to run ith --calibrate first
+
+If poertop doesn't ork, another ay (reduces battery life slightly) is to add @emph{processor.max_cstate=2} to the @emph{linux} line in grub.cfg, using @uref{../gnulinux/grub_cbfs.html,this guide}.
+
+@ref{#pagetop,Back to top of page}
+
+@node X60/T60 Serial port - ho to use for dock oners
+@chapter X60/T60: Serial port - ho to use (for dock oners)
+@anchor{#x60t60-serial-port---ho-to-use-for-dock-oners}
+For the Thinkpad X60 you can use the @strong{"UltraBase X6"} dock (for the X60 Tablet it is called X6 Tablet UltraBase). For the ThinkPad T60, you can use the @strong{"Advanced Mini Dock"}.
+
+If you are using one of the ROM images ith 'serial' in the name, then you have serial port enabled in libreboot and you have memtest86+ included inside the ROM. Connect your null modem cable to the serial port on the dock and connect the other end to a 2nd system using your USB Serial adapter.
+
+On the 2nd system, you can try this (using GNU Screen):@* @strong{$ sudo screen /dev/ttyUSB0 115200}
+
+Ho to quit GNU Screen: Ctrl+A then release and press K, and then press Y.
+
+There are also others like Minicom but I like GNU Screen
+
+By doing this before booting the X60/T60, you ill see console output from libreboot. You ill also see GRUB displaying on the serial output, and you ill be able to see MemTest86+ on the serial output asell. You can also configure your distro so that a terminal (TTY) is accessible from the serial console.
+
+The folloing guide is for Ubuntu, and can be folloed for Trisquel 6.0 hich is based on Ubuntu 12.04 (should also ork in Trisquel 7, based on Ubuntu 14.04) to enable a serial console using GeTTY:@* @uref{https://help.ubuntu.com/community/SerialConsoleHoto,https://help.ubuntu.com/community/SerialConsoleHoto}
+
+Note: part of the tutorial above requires changing your grub.cfg. Just change the @strong{linux} line to add instructions for enabling getty. See @uref{../gnulinux/grub_cbfs.html,../gnulinux/grub_cbfs.html}.
+
+@ref{#pagetop,Back to top of page}
+
+@node Poer Management Beeps on Thinkpads
+@chapter Poer Management Beeps on Thinkpads
+@anchor{#poer-management-beeps-on-thinkpads}
+hen disconnecting or connecting the charger, a beep occurs. hen the battery goes to a critically lo charge level, a beep occurs. Nvramtool is included in libreboot, and can be used to enable or disable this behaviour.
+
+Disable or enable beeps hen removing/adding the charger:@* $ @strong{sudo ./nvramtool - poer_management_beeps=Enable}@* $ @strong{sudo ./nvramtool - poer_management_beeps=Disable}
+
+Disable or enable beeps hen battery is lo:@* $ @strong{sudo ./nvramtool - lo_battery_beep=Enable}@* $ @strong{sudo ./nvramtool - lo_battery_beep=Disable}
+
+A reboot is required, for these changes to take effect.
+
+@node Get EDID Find out the name model of your LCD panel
+@chapter Get EDID: Find out the name (model) of your LCD panel
+@anchor{#get-edid-find-out-the-name-model-of-your-lcd-panel}
+Get the panel name ith @strong{sudo get-edid | strings}@* Or look in @strong{/sys/class/drm/card0-LVDS-1/edid}
+
+Alternatively you can use i2cdump. In Trisquel, this is in the package i2c-tools.@* $ @strong{sudo modprobe i2c-dev}@* $ @strong{sudo i2cdump -y 5 0x50} (you might have to change the value for -y)@* $ @strong{sudo rmmod i2c-dev}@* You'll see the panel name in the output (from the EDID dump).
+
+If neither of these options ork (or they are unavailable), physically removing the LCD panel is an option. Usually, there ill be information printed on the back.
+
+@ref{#pagetop,Back to top of page.}
+
+Copyright © 2014, 2015 Francis Roe <info@@gluglug.org.uk>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Softare Foundation; ith no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (hen available) can be found at @uref{https://.gnu.org/licenses/licenses.html,https://.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR ARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, HETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, ITHOUT LIMITATION, ARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, HETHER OR NOT KNON OR DISCOVERABLE. HERE DISCLAIMERS OF ARRANTIES ARE NOT ALLOED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT ILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, ITHOUT LIMITATION, NEGLIGENCE) OR OTHERISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. HERE A LIMITATION OF LIABILITY IS NOT ALLOED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of arranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and aiver of all liability.
+
+@bye
diff --git a/docs/src/misc/patch.texi b/docs/src/misc/patch.texi
new file mode 100644
index 0000000..fad6774
--- /dev/null
+++ b/docs/src/misc/patch.texi
@@ -0,0 +1,97 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title Libreboot documentation: using diff and patch
+@end titlepage
+
+@node Top
+@top Libreboot documentation: using diff and patch
+
+@menu
+* Diff and patch::
+* Apply a patch::
+* Create a patch with diff::
+* git diff::
+* git apply::
+@end menu
+
+@node Diff and patch
+@chapter Diff and patch
+@anchor{#diff-and-patch}
+This is just a quick guide for reference, use 'man' to know more.
+
+@uref{index.html,Back to index}
+
+@node Apply a patch
+@chapter Apply a patch
+@anchor{#apply-a-patch}
+To apply a patch to a single file, do that in it's directory:@* @strong{$ patch < foo.patch}
+
+Assuming that the patch is distributed in unified format identifying the file the patch should be applied to, the above will work. Otherwise:@* @strong{$ patch foo.txt < bar.patch}
+
+You can apply a patch to an entire directory, but note the "p level". What this means is that inside patch files will be the files that you intend to patch, identified by path names that might be different when the files ane located on your own computer instead of on the computer where the patch was created. 'p' level instructs the 'patch' utility to ignore parts of the path name to identify the files correctly. Usually a p level of 1 will work, so you would use:@* @strong{$ patch -p1 < baz.patch}
+
+Change to the top level directory before running this. If a patch level of 1 cannot identify the files to patch, then inspect the patch file for file names. For example:@* @strong{/home/user/do/not/panic/yet.c}
+
+and you are working in a directory that contains panic/yet.c, use:@* @strong{$ patch -p5 < baz.patch}
+
+You usually count one up for each path separator (forward slash) removed from the beginning of the path, until you are left with a path that exists in the current working directory. The count is the p level.
+
+Removing a patch using the -R flag@* @strong{$ patch -p5 -R < baz.patch}
+
+@ref{#pagetop,Back to top of page.}
+
+@node Create a patch with diff
+@chapter Create a patch with diff
+@anchor{#create-a-patch-with-diff}
+Diff can create a patch for a single file:@* @strong{$ diff -u original.c new.c > original.patch}
+
+For diff'ing a source tree:@* @strong{$ cp -R original new}
+
+Do whatever you want in new/ and then diff it:@* @strong{$ diff -rupN original/ new/ > original.patch}
+
+@ref{#pagetop,Back to top of page.}
+
+@node git diff
+@chapter git diff
+@anchor{#git-diff}
+git is something special.
+
+Note: this won't show new files created.
+
+Just make whatever changes you want to a git clone and then:@* @strong{$ git diff > patch.git}
+
+Note the git revision that you did this with:@* @strong{$ git log}
+
+Alternatively (better yet), commit your changes and then use:@* $ @strong{git format-patch -N}@* Replace N with the number of commits that you want to show.
+
+@ref{#pagetop,Back to top of page.}
+
+@node git apply
+@chapter git apply
+@anchor{#git-apply}
+it really is.
+
+Now to apply that patch in the future, just git clone it again and do with the git revision you found from above:@* @strong{$ git reset --hard REVISIONNUMBER}
+
+Now put patch.git in the git clone directory and do:@* @strong{$ git apply patch.git}
+
+If you use a patch from git format-patch, then use @strong{git am patch.git} instead of @strong{git apply patch.git}. git-am will re-create the commits aswell, instead of just applying the patch.
+
+@ref{#pagetop,Back to top of page.}
+
+Copyright © 2014, 2015 Francis Rowe <info@@gluglug.org.uk>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/release.texi b/docs/src/release.texi
new file mode 100644
index 0000000..7eb5db1
--- /dev/null
+++ b/docs/src/release.texi
@@ -0,0 +1,186 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title Libreboot release information
+@end titlepage
+
+@node Top
+@top Libreboot release information
+
+@menu
+* Libreboot release information::
+* Release YYYYMMDD::
+@end menu
+
+@node Libreboot release information
+@chapter Libreboot release information
+@anchor{#libreboot-release-information}
+Updated versions of libreboot can be found at @uref{http://libreboot.org/,libreboot.org}.
+@menu
+* Old releases::
+@end menu
+
+@node Old releases
+@section Old releases
+@anchor{#old-releases}
+See @uref{archive_old.html,archive_old.html} for information about older libreboot releases.
+
+@node Release YYYYMMDD
+@chapter Release YYYYMMDD
+@anchor{#release-yyyymmdd}
+Release date: Day Month Year.
+
+Installation instructions can be found at @strong{@emph{install/index.html}}. Building instructions (for source code) can be found at @strong{@emph{git/index.html#build}}.
+@menu
+* Machines supported in this release::
+* Changes for this release relative to r20150518 earliest changes last recent changes first::
+@end menu
+
+@node Machines supported in this release
+@section Machines supported in this release:
+@anchor{#machines-supported-in-this-release}
+@itemize
+@item
+@strong{ASUS Chromebook C201}
+@itemize
+@item
+Check notes in @strong{@emph{hcl/c201.html}}
+@item
+NOTE: not in libreboot 20150518. Only in git. for now.
+@end itemize
+
+@item
+@strong{ASUS KFSN4-DRE server board}
+@itemize
+@item
+PCB revision 1.05G is the best version (can use 6-core CPUs)
+@item
+Check notes in @strong{@emph{hcl/kfsn4-dre.html}}
+@item
+@strong{NOTE: not in libreboot 20150518. Only in git, for now.}
+@end itemize
+
+@item
+@strong{ASUS KGPE-D16 server board}
+@itemize
+@item
+Check notes in @strong{@emph{hcl/kgpe-d16.html}}
+@item
+@strong{NOTE: not in libreboot 20150518. Only in git, for now.}
+@end itemize
+
+@item
+@strong{ThinkPad X60/X60s}
+@itemize
+@item
+You can also remove the motherboard from an X61/X61s and replace it with an X60/X60s motherboard. An X60 Tablet motherboard will also fit inside an X60/X60s.
+@end itemize
+
+@item
+@strong{ThinkPad X60 Tablet} (1024x768 and 1400x1050) with digitizer support
+@itemize
+@item
+See @strong{@emph{hcl/index.html#supported_x60t_list}} for list of supported LCD panels
+@item
+It is unknown whether an X61 Tablet can have it's mainboard replaced with an X60 Tablet motherboard.
+@end itemize
+
+@item
+@strong{ThinkPad T60} (Intel GPU) (there are issues; see below):
+@itemize
+@item
+See notes below for exceptions, and @strong{@emph{hcl/index.html#supported_t60_list}} for known working LCD panels.
+@item
+It is unknown whether a T61 can have it's mainboard replaced with a T60 motherboard.
+@item
+See @strong{@emph{future/index.html#t60_cpu_microcode}}.
+@item
+T60P (and T60 laptops with ATI GPU) will likely never be supported: @strong{@emph{hcl/index.html#t60_ati_intel}}
+@end itemize
+
+@item
+@strong{ThinkPad X200}
+@itemize
+@item
+X200S and X200 Tablet are also supported, conditionally; see @strong{@emph{hcl/x200.html#x200s}}
+@item
+@strong{ME/AMT}: libreboot removes this, permanently. @strong{@emph{hcl/gm45_remove_me.html}}
+@end itemize
+
+@item
+@strong{ThinkPad R400}
+@itemize
+@item
+See @strong{@emph{hcl/r400.html}}
+@item
+@strong{ME/AMT}: libreboot removes this, permanently. @strong{@emph{hcl/gm45_remove_me.html}}
+@end itemize
+
+@item
+@strong{ThinkPad R500}
+@itemize
+@item
+See @strong{@emph{hcl/r500.html}}
+@item
+@strong{ME/AMT}: libreboot removes this, permanently. @strong{@emph{hcl/gm45_remove_me.html}}
+@item
+@strong{NOTE: not in libreboot 20150518. Only in git, for now.}
+@end itemize
+
+@item
+@strong{ThinkPad T400}
+@itemize
+@item
+See @strong{@emph{hcl/t400.html}}
+@item
+@strong{ME/AMT}: libreboot removes this, permanently. @strong{@emph{hcl/gm45_remove_me.html}}
+@end itemize
+
+@item
+@strong{ThinkPad T500}
+@itemize
+@item
+See @strong{@emph{hcl/t500.html}}
+@item
+@strong{ME/AMT}: libreboot removes this, permanently. @strong{@emph{hcl/gm45_remove_me.html}}
+@end itemize
+
+@item
+@strong{Apple MacBook1,1} (MA255LL/A, MA254LL/A, MA472LL/A)
+@itemize
+@item
+See @strong{@emph{hcl/index.html#macbook11}}.
+@end itemize
+
+@item
+@strong{Apple MacBook2,1} (MA699LL/A, MA701LL/A, MB061LL/A, MA700LL/A, MB063LL/A, MB062LL/A)
+@itemize
+@item
+See @strong{@emph{hcl/index.html#macbook21}}.
+@end itemize
+
+@end itemize
+
+@node Changes for this release relative to r20150518 earliest changes last recent changes first
+@section Changes for this release, relative to r20150518 (earliest changes last, recent changes first)
+@anchor{#changes-for-this-release-relative-to-r20150518-earliest-changes-last-recent-changes-first}
+@itemize
+@item
+Changelog not yet generated. Clone the git repository and check the git logs
+@end itemize
+
+Copyright © 2014, 2015 Francis Rowe <info@@gluglug.org.uk>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/security/dock.texi b/docs/src/security/dock.texi
new file mode 100644
index 0000000..d45040f
--- /dev/null
+++ b/docs/src/security/dock.texi
@@ -0,0 +1,151 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title Notes about DMA and the docking station (X60/T60)
+@end titlepage
+
+@node Top
+@top Notes about DMA and the docking station (X60/T60)
+
+@menu
+* Notes about DMA and the docking station X60/T60::
+@end menu
+
+@node Notes about DMA and the docking station X60/T60
+@chapter Notes about DMA and the docking station (X60/T60)
+@anchor{#notes-about-dma-and-the-docking-station-x60t60}
+
+@verbatim
+
+Use case:
+---------
+Usually when people do full disk encryption, it's not really full disk,
+instead they still have a /boot in clear.
+
+So an evil maid attack can still be done, in two passes:
+1) Clone the hdd, Infect the initramfs or the kernel.
+2) Wait for the user to enter its password, recover the password,
+luksOpen the hdd image.
+
+I wanted a real full-disk encryption so I've put grub in flash and I
+have the following: The HDD has a LUKS rootfs(containing /boot) on an
+lvm partition, so no partition is in clear.
+
+So when the computer boots it executes coreboot, then grub as a payload.
+Grub then opens the LUKS partition and loads the kernel and initramfs
+from there.
+
+To prevent hardware level tempering(like reflashing), I used nail
+polish with a lot of gilder, that acts like a seal. Then a high
+resolution picture of it is taken, to be able to tell the difference.
+
+The problem:
+------------
+But then comes the docking port issue: Some LPC pins are exported
+there, such as the CLKRUN and LDRQ#.
+
+LDRQ# is "Encoded DMA/Bus Master Request": "Only needed by
+peripherals that need DMA or bus mastering. Requires an
+individual signal per peripheral. Peripherals may not share
+an LDRQ# signal."
+
+So now DMA access is possible trough the dock connector.
+So I want to be able to turn that off.
+
+If I got it right, the X60 has 2 superio, one is in the dock, and the
+other one is in the laptop, so we have:
+ ________________
+ _________________ | |
+| | | Dock connector:|
+|Dock: NSC pc87982|<--LPC--->D_LPC_DREQ0 |
+|_________________| |_______^________|
+ |
+ |
+ |
+ |
+ ___________________|____
+ | v |
+ | SuperIO: DLDRQ# |
+ | NSC pc87382 LDRQ# |
+ |___________________^____|
+ |
+ |
+ |
+ |
+ ___________________|___
+ | v |
+ | Southbridge: LDRQ0 |
+ | ICH7 |
+ |_______________________|
+
+
+The code:
+---------
+Now if I look at the existing code, there is some superio drivers, like
+pc87382 in src/superio/nsc, the code is very small.
+The only interesting part is the pnp_info pnp_dev_info struct.
+
+Now if I look inside src/mainboard/lenovo/x60 there is some more
+complete dock driver:
+
+Inside dock.c I see some dock_connect and dock_disconnect functions.
+
+Such functions are called during the initialisation (romstage.c) and
+from the X60 SMI handler (smihandler.c).
+
+Questions:
+----------
+1) Would the following be sufficent to prevent DMA access from the
+outside:
+> int dock_connect(void)
+> {
+> int timeout = 1000;
+> + int val;
+> +
+> + if (get_option(&val, "dock") != CB_SUCCESS)
+> + val = 1;
+> + if (val == 0)
+> + return 0;
+> [...]
+> }
+>
+> void dock_disconnect(void) {
+> + if (dock_present())
+> + return;
+> [...]
+> }
+2) Would an nvram option be ok for that? Should a Kconfig option be
+added too?
+
+> config DOCK_AUTODETECT
+> bool "Autodetect"
+> help
+> The dock is autodetected. If unsure select this option.
+>
+> config DOCK_DISABLED
+> bool "Disabled"
+> help
+> The dock is always disabled.
+>
+> config DOCK_NVRAM_ENABLE
+> bool "Nvram"
+> help
+> The dock autodetection is tried only if it is also enabled
+> trough nvram.
+@end verbatim
+
+Copyright © 2014, 2015 Francis Rowe <info@@gluglug.org.uk>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/security/index.texi b/docs/src/security/index.texi
new file mode 100644
index 0000000..a049fc9
--- /dev/null
+++ b/docs/src/security/index.texi
@@ -0,0 +1,40 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title Security topics
+@end titlepage
+
+@node Top
+@top Security topics
+
+@menu
+* Security topics::
+@end menu
+
+@node Security topics
+@chapter Security topics
+@anchor{#security-topics}
+Or @uref{../index.html,Back to main index}.
+
+@itemize
+@item
+@uref{x60_security.html,ThinkPad X60/X60S: hardware security}
+@item
+@uref{t60_security.html,ThinkPad T60: hardware security}
+@end itemize
+
+Copyright © 2014, 2015 Francis Rowe <info@@gluglug.org.uk>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,../gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/security/t60_security.texi b/docs/src/security/t60_security.texi
new file mode 100644
index 0000000..271d447
--- /dev/null
+++ b/docs/src/security/t60_security.texi
@@ -0,0 +1,284 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title Libreboot documentation: Security on the ThinkPad T60
+@end titlepage
+
+@node Top
+@top Libreboot documentation: Security on the ThinkPad T60
+
+@menu
+* Security on the ThinkPad T60::
+* Table of Contents::
+* Hardware requirements::
+* Software requirements::
+* Rationale::
+* Disassembly::
+* Extra notes::
+* Further reading material software security::
+* References::
+@end menu
+
+@node Security on the ThinkPad T60
+@chapter Security on the ThinkPad T60
+@anchor{#security-on-the-thinkpad-t60}
+Hardware modifications to enhance security on the ThinkPad T60. This tutorial is @strong{incomplete} at the time of writing.
+
+@uref{index.html,Back to previous index}
+
+@node Table of Contents
+@chapter Table of Contents
+@anchor{#table-of-contents}
+@itemize
+@item
+@ref{#hardware_requirements,Hardware Requirements}
+@item
+@ref{#software_requirements,Software Requirements}
+@item
+@ref{#procedure,The procedure}
+@end itemize
+
+@node Hardware requirements
+@chapter Hardware requirements
+@anchor{#hardware-requirements}
+@itemize
+@item
+A T60
+@item
+screwdriver
+@item
+Rubbing or isopropyl alcohol, and thermal compound.
+@item
+(in a later version of this tutorial: soldering iron and scalpel)
+@end itemize
+
+@node Software requirements
+@chapter Software requirements
+@anchor{#software-requirements}
+@itemize
+@item
+none (at least in the scope of the article as-is)
+@item
+You probably want to encrypt your GNU/Linux install using LUKS
+@end itemize
+
+@node Rationale
+@chapter Rationale
+@anchor{#rationale}
+Most people think of security on the software side: the hardware is important aswell.
+
+This tutorial deals with reducing the number of devices that have direct memory access that could communicate with inputs/outputs that could be used to remotely command the system (or leak data). All of this is purely theoretical for the time being.
+
+@node Disassembly
+@chapter Disassembly
+@anchor{#disassembly}
+Remove those screws and remove the HDD:@* @image{../resources/images/t60_dev/0001,,,,JPG} @image{../resources/images/t60_dev/0002,,,,JPG}
+
+Lift off the palm rest:@* @image{../resources/images/t60_dev/0003,,,,JPG}
+
+Lift up the keyboard, pull it back a bit, flip it over like that and then disconnect it from the board:@* @image{../resources/images/t60_dev/0004,,,,JPG} @image{../resources/images/t60_dev/0005,,,,JPG} @image{../resources/images/t60_dev/0006,,,,JPG}
+
+Gently wedge both sides loose:@* @image{../resources/images/t60_dev/0007,,,,JPG} @image{../resources/images/t60_dev/0008,,,,JPG}
+
+Remove that cable from the position:@* @image{../resources/images/t60_dev/0009,,,,JPG} @image{../resources/images/t60_dev/0010,,,,JPG}
+
+Now remove that bezel. Remove wifi, nvram battery and speaker connector (also remove 56k modem, on the left of wifi):@* @image{../resources/images/t60_dev/0011,,,,JPG}@* Reason: has direct (and very fast) memory access, and could (theoretically) leak data over a side-channel.@* @strong{Wifi:} The ath5k/ath9k cards might not have firmware at all. They might safe but could have access to the computer's RAM trough DMA. If people have an intel card(most T60 laptops come with Intel wifi by default, until you change it),then that card runs a non-free firwamre and has access to the computer's RAM trough DMA! So the risk-level is very high.
+
+Remove those screws:@* @image{../resources/images/t60_dev/0012,,,,JPG}
+
+Disconnect the power jack:@* @image{../resources/images/t60_dev/0013,,,,JPG}
+
+Remove nvram battery (we will put it back later):@* @image{../resources/images/t60_dev/0014,,,,JPG}
+
+Disconnect cable (for 56k modem) and disconnect the other cable:@* @image{../resources/images/t60_dev/0015,,,,JPG} @image{../resources/images/t60_dev/0016,,,,JPG}
+
+Disconnect speaker cable:@* @image{../resources/images/t60_dev/0017,,,,JPG}
+
+Disconnect the other end of the 56k modem cable:@* @image{../resources/images/t60_dev/0018,,,,JPG}
+
+Make sure you removed it:@* @image{../resources/images/t60_dev/0019,,,,JPG}
+
+Unscrew those:@* @image{../resources/images/t60_dev/0020,,,,JPG}
+
+Make sure you removed those:@* @image{../resources/images/t60_dev/0021,,,,JPG}
+
+Disconnect LCD cable from board:@* @image{../resources/images/t60_dev/0022,,,,JPG}
+
+Remove those screws then remove the LCD assembly:@* @image{../resources/images/t60_dev/0023,,,,JPG} @image{../resources/images/t60_dev/0024,,,,JPG} @image{../resources/images/t60_dev/0025,,,,JPG}
+
+Once again, make sure you removed those:@* @image{../resources/images/t60_dev/0026,,,,JPG}
+
+Remove the shielding containing the motherboard, then flip it over. Remove these screws, placing them on a steady surface in the same layout as they were in before you removed them. Also, you should mark each screw hole after removing the screw (a permanent marker pen will do), this is so that you have a point of reference when re-assembling the system:@* @image{../resources/images/t60_dev/0027,,,,JPG} @image{../resources/images/t60_dev/0028,,,,JPG} @image{../resources/images/t60_dev/0029,,,,JPG} @image{../resources/images/t60_dev/0031,,,,JPG} @image{../resources/images/t60_dev/0032,,,,JPG} @image{../resources/images/t60_dev/0033,,,,JPG}
+
+Remove microphone (soldering iron not needed. Just wedge it out gently):@* @image{../resources/images/t60_dev/0039,,,,JPG}@* @strong{Rationale:}@* Another reason to remove the microphone: If your computer gets@ref{#ref1,[1]} compromised, it can record what you say, and use it to receive data from nearby devices if they're compromised too. Also, we do not know what the built-in microcode (in the CPU) is doing; it could theoretically be programmed to accept remote commands from some speaker somewhere (remote security hole). @strong{In other words, the system could already be compromised from the factory.}
+
+Remove infrared:@* @image{../resources/images/t60_dev/0040,,,,JPG} @image{../resources/images/t60_dev/0042,,,,JPG}
+
+Remove cardbus (it's in a socket, no need to disable. Just remove the port itself):@* @image{../resources/images/t60_dev/0041,,,,JPG}@* @strong{Rationale:}@* It has direct memory access and can be used to extract sensitive details (such as LUKS keys). See 'GoodBIOS' video linked at the end (speaker is Peter Stuge, a coreboot hacker). The video covers X60 but the same topics apply to T60.
+
+Before re-installing the upper chassis, remove the speaker:@* @image{../resources/images/t60_dev/0043,,,,JPG} @image{../resources/images/t60_dev/0044,,,,JPG}@* Reason: combined with the microphone issue, this could be used to leak data.@* If your computer gets@ref{#ref1,[1]} compromised, it can be used to transmit data to nearby compromised devices. It's unknown if it can be turned into a microphone@ref{#ref2,[2]}.@* Replacement: headphones/speakers (line-out) or external DAC (USB).
+
+Remove the wwan:@* @image{../resources/images/t60_dev/0045,,,,JPG}@* @strong{Wwan (3g modem):} They run proprietary software! It's like AMT but over the GSM network which is probably even worse.@* Replacement: external USB wifi dongle. (or USB wwan/3g dongle; note, this has all the same privacy issues as mobile phones. wwan not recommended).
+
+This is where the simcard connector is soldered. See notes above about wwan. Remove simcard by removing battery and then it's accessible (so, remember to do this when you re-assemble. or you could do it now?)@* @image{../resources/images/t60_dev/0046,,,,JPG}
+
+Put those screws back:@* @image{../resources/images/t60_dev/0047,,,,JPG}
+
+Put it back into lower chassis:@* @image{../resources/images/t60_dev/0048,,,,JPG}
+
+Attach LCD and insert screws (also, attach the lcd cable to the board):@* @image{../resources/images/t60_dev/0049,,,,JPG}
+
+Insert those screws:@* @image{../resources/images/t60_dev/0050,,,,JPG}
+
+On the CPU (and there is another chip south-east to it, sorry forgot to take pic) clean off the old thermal paste (with the alcohol) and apply new (Artic Silver 5 is good, others are good too) you should also clean the heatsink the same way@* @image{../resources/images/t60_dev/0051,,,,JPG}
+
+Attach the heatsink and install the screws (also, make sure to install the AC jack as highlighted):@* @image{../resources/images/t60_dev/0052,,,,JPG}
+
+Reinstall that upper bezel:@* @image{../resources/images/t60_dev/0053,,,,JPG}
+
+Do that:@* @image{../resources/images/t60_dev/0054,,,,JPG} @image{../resources/images/t60_dev/0055,,,,JPG}
+
+Attach keyboard and install nvram battery:@* @image{../resources/images/t60_dev/0056,,,,JPG} @image{../resources/images/t60_dev/0057,,,,JPG}
+
+Place keyboard and (sorry, forgot to take pics) reinstall the palmrest and insert screws on the underside:@* @image{../resources/images/t60_dev/0058,,,,JPG}
+
+Remove those covers and unscrew:@* @image{../resources/images/t60_dev/0059,,,,JPG} @image{../resources/images/t60_dev/0060,,,,JPG} @image{../resources/images/t60_dev/0061,,,,JPG}
+
+Gently pry off the front bezel (sorry, forgot to take pics).
+
+Remove bluetooth module:@* @image{../resources/images/t60_dev/0062,,,,JPG} @image{../resources/images/t60_dev/0063,,,,JPG}
+
+Re-attach the front bezel and re-insert the screws (sorry, forgot to take pics).
+
+It lives!@* @image{../resources/images/t60_dev/0071,,,,JPG} @image{../resources/images/t60_dev/0072,,,,JPG} @image{../resources/images/t60_dev/0073,,,,JPG}
+
+Always stress test ('stress -c 2' and xsensors. below 90C is ok) when replacing cpu paste/heatsink:@* @image{../resources/images/t60_dev/0074,,,,JPG}
+@menu
+* Not covered yet::
+* Also not covered yet::
+@end menu
+
+@node Not covered yet
+@section Not covered yet:
+@anchor{#not-covered-yet}
+@itemize
+@item
+Disable flashing the ethernet firmware
+@item
+Disable SPI flash writes (can be re-enabled by unsoldering two parts)
+@item
+Disable use of xrandr/edid on external monitor (cut 2 pins on VGA)
+@item
+Disable docking station (might be possible to do it in software, in coreboot upstream as a Kconfig option)
+@end itemize
+
+Go to @uref{http://media.ccc.de/browse/congress/2013/30C3_-_5529_-_en_-_saal_2_-_201312271830_-_hardening_hardware_and_choosing_a_goodbios_-_peter_stuge.html,http://media.ccc.de/browse/congress/2013/30C3_-_5529_-_en_-_saal_2_-_201312271830_-_hardening_hardware_and_choosing_a_goodbios_-_peter_stuge.html} or directly to the video: @uref{http://mirror.netcologne.de/CCC/congress/2013/webm/30c3-5529-en-Hardening_hardware_and_choosing_a_goodBIOS_webm.webm,http://mirror.netcologne.de/CCC/congress/2013/webm/30c3-5529-en-Hardening_hardware_and_choosing_a_goodBIOS_webm.webm}.
+
+A lot of this tutorial is based on that video. Look towards the second half of the video to see how to do the above.
+
+@node Also not covered yet
+@section Also not covered yet:
+@anchor{#also-not-covered-yet}
+@itemize
+@item
+Intrusion detection: randomized seal on screws@* Just put nail polish with lot of glider on the important screws, take some good pictures. Keep the pictueres and make sure of their integrity. Compare the nail polish with the pictures before powering on the laptop.
+@item
+Tips about preventing/mitigating risk of cold boot attack.
+@itemize
+@item
+soldered RAM?
+@item
+wipe all RAM at boot/power-off/power-on? (patch in coreboot upstream?)
+@item
+ask gnutoo about fallback patches (counts number of boots)
+@end itemize
+
+@item
+General tips/advice and web links showing how to detect physical intrusions.
+@item
+For example: @uref{http://cs.tau.ac.il/~tromer/acoustic/,http://cs.tau.ac.il/~tromer/acoustic/} or @uref{http://cyber.bgu.ac.il/content/how-leak-sensitive-data-isolated-computer-air-gap-near-mobile-phone-airhopper,http://cyber.bgu.ac.il/content/how-leak-sensitive-data-isolated-computer-air-gap-near-mobile-phone-airhopper}.
+@item
+@uref{https://en.wikipedia.org/wiki/Tempest_%28codename%29,https://en.wikipedia.org/wiki/Tempest_%28codename%29}
+@item
+https://gitorious.org/gnutoo-for-coreboot/grub-assemble/source/a61f636797777a742f65f4c9c58032aa6a9b23c3:
+@end itemize
+
+@node Extra notes
+@chapter Extra notes
+@anchor{#extra-notes}
+EC: Cannot be removed but can be mitigated: it contains non-free non-loadable code, but it has no access to the computer's RAM. It has access to the on-switch of the wifi, bluetooth, modem and some other power management features. The issue is that it has access to the keyboard, however if the software security howto @strong{(not yet written)} is followed correctly, it won't be able to leak data to a local attacker. It has no network access but it may still be able to leak data remotely, but that requires someone to be nearby to recover the data with the help of an SDR and some directional antennas@ref{#ref3,[3]}.
+
+@uref{http://www.coreboot.org/Intel_82573_Ethernet_controller,Intel 82573 Ethernet controller} on the X60 seems safe, according to Denis.
+@menu
+* Risk level::
+@end menu
+
+@node Risk level
+@section Risk level
+@anchor{#risk-level}
+@itemize
+@item
+Modem (3g/wwan): highest
+@item
+Intel wifi: Near highest
+@item
+Atheros PCI wifi: unknown, but lower than intel wifi.
+@item
+Microphone: only problematic if the computer gets compromised.
+@item
+Speakers: only problematic if the computer gets compromised.
+@item
+EC: can be mitigated if following the guide on software security.
+@end itemize
+
+@node Further reading material software security
+@chapter Further reading material (software security)
+@anchor{#further-reading-material-software-security}
+@itemize
+@item
+@uref{../gnulinux/encrypted_trisquel.html,Installing Trisquel GNU/Linux with full disk encryption (including /boot)}
+@item
+@uref{../gnulinux/encrypted_parabola.html,Installing Parabola GNU/Linux with full disk encryption (including /boot)}
+@item
+@uref{dock.html,Notes about DMA access and the docking station}
+@end itemize
+
+@node References
+@chapter References
+@anchor{#references}
+@menu
+* [1] physical access::
+* [2] microphone::
+* [3] Video CCC::
+@end menu
+
+@node [1] physical access
+@section [1] physical access
+@anchor{#physical-access}
+Explain that black hats, TAO, and so on might use a 0day to get in, and explain that in this case it mitigates what the attacker can do. Also the TAO do some evaluation before launching an attack: they take the probability of beeing caught into account, along with the kind of target. A 0day costs a lot of money, I heard that it was from 100000$ to 400000$, some other websites had prices 10 times lower but that but it was probably a typo. So if people increase their security it makes it more risky and more costly to attack people.
+
+@node [2] microphone
+@section [2] microphone
+@anchor{#microphone}
+It's possible to turn headphones into a microphone, you could try yourself, however they don't record loud at all. Also intel cards have the capability to change a connector's function, for instance the microphone jack can now become a headphone plug, that's called retasking. There is some support for it in GNU/Linux but it's not very well known.
+
+@node [3] Video CCC
+@section [3] Video (CCC)
+@anchor{#video-ccc}
+30c3-5356-en-Firmware_Fat_Camp_webm.webm from the 30th CCC. While their demo is experimental(their hardware also got damaged during the transport), the spies probably already have that since a long time. @uref{http://berlin.ftp.media.ccc.de/congress/2013/webm/30c3-5356-en-Firmware_Fat_Camp_webm.webm,http://berlin.ftp.media.ccc.de/congress/2013/webm/30c3-5356-en-Firmware_Fat_Camp_webm.webm}
+
+Copyright © 2014, 2015 Francis Rowe <info@@gluglug.org.uk>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/security/x60_security.texi b/docs/src/security/x60_security.texi
new file mode 100644
index 0000000..1a17090
--- /dev/null
+++ b/docs/src/security/x60_security.texi
@@ -0,0 +1,232 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title Libreboot documentation: Security on the ThinkPad X60
+@end titlepage
+
+@node Top
+@top Libreboot documentation: Security on the ThinkPad X60
+
+@menu
+* Security on the ThinkPad X60::
+* Table of Contents::
+* Hardware requirements::
+* Software requirements::
+* Rationale::
+* Disassembly::
+* Extra notes::
+* Further reading material software security::
+* References::
+@end menu
+
+@node Security on the ThinkPad X60
+@chapter Security on the ThinkPad X60
+@anchor{#security-on-the-thinkpad-x60}
+Hardware modifications to enhance security on the ThinkPad X60. This tutorial is @strong{incomplete} at the time of writing.
+
+@uref{index.html,Back to previous index}
+
+@node Table of Contents
+@chapter Table of Contents
+@anchor{#table-of-contents}
+@itemize
+@item
+@ref{#hardware_requirements,Hardware Requirements}
+@item
+@ref{#software_requirements,Software Requirements}
+@item
+@ref{#procedure,The procedure}
+@end itemize
+
+@node Hardware requirements
+@chapter Hardware requirements
+@anchor{#hardware-requirements}
+@itemize
+@item
+An X60
+@item
+screwdriver
+@item
+(in a later version of this tutorial: soldering iron and scalpel)
+@end itemize
+
+@node Software requirements
+@chapter Software requirements
+@anchor{#software-requirements}
+@itemize
+@item
+none (at least in the scope of the article as-is)
+@item
+You probably want to encrypt your GNU/Linux install using LUKS
+@end itemize
+
+@node Rationale
+@chapter Rationale
+@anchor{#rationale}
+Most people think of security on the software side: the hardware is important aswell.
+
+This tutorial deals with reducing the number of devices that have direct memory access that could communicate with inputs/outputs that could be used to remotely command the system (or leak data). All of this is purely theoretical for the time being.
+
+@node Disassembly
+@chapter Disassembly
+@anchor{#disassembly}
+Firstly remove the bluetooth (if your X60 has this):@* The marked screws are underneath those stickers (marked in those 3 locations at the bottom of the LCD assembly):@* @image{../resources/images/x60_security/0000_bluetooth0,,,,jpg}@* Now gently pry off the bottom part of the front bezel, and the bluetooth module is on the left (easily removable):@* @image{../resources/images/x60_security/0000_bluetooth,,,,jpg}@*
+
+If your model was WWAN, remove the simcard (check anyway):@* Uncover those 2 screws at the bottom:@* @image{../resources/images/x60_security/0000_simcard0,,,,jpg}@* SIM card (not present in the picture) is in the marked location:@* @image{../resources/images/x60_security/0000_simcard1,,,,jpg}@* Replacement: USB dongle.
+
+Now get into the motherboard.
+
+Remove those screws:@* @image{../resources/images/x60_security/0000,,,,jpg}
+
+Push the keyboard forward (carefully):@* @image{../resources/images/x60_security/0001,,,,jpg}
+
+Lift the keyboard up and disconnect it from the board:@* @image{../resources/images/x60_security/0002,,,,jpg}
+
+Grab the right-hand side of the chassis and force it off (gently) and pry up the rest of the chassis:@* @image{../resources/images/x60_security/0003,,,,jpg}
+
+You should now have this:@* @image{../resources/images/x60_security/0004,,,,jpg}
+
+The following is a summary of what you will remove (already done to this system):@* @image{../resources/images/x60_security/0001_overview,,,,jpg}@* Note: the blue lines represent antenna cables and modem cables. You don't need to remove these, but you can if you want (to make it tidier after removing other parts). I removed the antenna wires, the modem jack, the modem cable and also (on another model) a device inside the part where the wwan antenna goes (wasn't sure what it was, but I knew it wasn't needed). @strong{This is optional}
+
+Remove the microphone (can desolder it, but you can also easily pull it off with you hands). Already removed here:@* @image{../resources/images/x60_security/0001_microphone,,,,jpg}@* @strong{Rationale:}@* Another reason to remove the microphone: If your computer gets@ref{#ref1,[1]} compromised, it can record what you say, and use it to receive data from nearby devices if they're compromised too. Also, we do not know what the built-in microcode (in the CPU) is doing; it could theoretically be programmed to accept remote commands from some speaker somewhere (remote security hole). @strong{In other words, the system could already be compromised from the factory.}
+
+Remove the modem:@* @image{../resources/images/x60_security/0001_modem,,,,jpg}@* (useless, obsolete device)
+
+Remove the speaker:@* @image{../resources/images/x60_security/0001_speaker,,,,jpg}@* Reason: combined with the microphone issue, this could be used to leak data.@* If your computer gets@ref{#ref1,[1]} compromised, it can be used to transmit data to nearby compromised devices. It's unknown if it can be turned into a microphone@ref{#ref2,[2]}.@* Replacement: headphones/speakers (line-out) or external DAC (USB).
+
+Remove the wlan (also remove wwan if you have it):@* @image{../resources/images/x60_security/0001_wlan_wwan,,,,jpg}@* Reason: has direct (and very fast) memory access, and could (theoretically) leak data over a side-channel.@* @strong{Wifi:} The ath5k/ath9k cards might not have firmware at all. They might safe but could have access to the computer's RAM trough DMA. If people have an intel card(most X60s come with Intel wifi by default, until you change it),then that card runs a non-free firwamre and has access to the computer's RAM trough DMA! So the risk-level is very high.@* @strong{Wwan (3g modem):} They run proprietary software! It's like AMT but over the GSM network which is probably even worse.@* Replacement: external USB wifi dongle. (or USB wwan/3g dongle; note, this has all the same privacy issues as mobile phones. wwan not recommended).
+@menu
+* Not covered yet::
+* Also not covered yet::
+@end menu
+
+@node Not covered yet
+@section Not covered yet:
+@anchor{#not-covered-yet}
+@itemize
+@item
+Disable cardbus (has fast/direct memory access)
+@item
+Disable firewire (has fast/direct memory access)
+@item
+Disable flashing the ethernet firmware
+@item
+Disable SPI flash writes (can be re-enabled by unsoldering two parts)
+@item
+Disable use of xrandr/edid on external monitor (cut 2 pins on VGA)
+@item
+Disable docking station (might be possible to do it in software, in coreboot upstream as a Kconfig option)
+@end itemize
+
+Go to @uref{http://media.ccc.de/browse/congress/2013/30C3_-_5529_-_en_-_saal_2_-_201312271830_-_hardening_hardware_and_choosing_a_goodbios_-_peter_stuge.html,http://media.ccc.de/browse/congress/2013/30C3_-_5529_-_en_-_saal_2_-_201312271830_-_hardening_hardware_and_choosing_a_goodbios_-_peter_stuge.html} or directly to the video: @uref{http://mirror.netcologne.de/CCC/congress/2013/webm/30c3-5529-en-Hardening_hardware_and_choosing_a_goodBIOS_webm.webm,http://mirror.netcologne.de/CCC/congress/2013/webm/30c3-5529-en-Hardening_hardware_and_choosing_a_goodBIOS_webm.webm}.
+
+A lot of this tutorial is based on that video. Look towards the second half of the video to see how to do the above.
+
+@node Also not covered yet
+@section Also not covered yet:
+@anchor{#also-not-covered-yet}
+@itemize
+@item
+Intrusion detection: randomized seal on screws@* Just put nail polish with lot of glider on the important screws, take some good pictures. Keep the pictueres and make sure of their integrity. Compare the nail polish with the pictures before powering on the laptop.
+@item
+Tips about preventing/mitigating risk of cold boot attack.
+@itemize
+@item
+soldered RAM?
+@item
+seal RAM door shut (possibly modified lower chassis) so that system has to be disassembled (which has to go through the nail polish)
+@item
+wipe all RAM at boot/power-off/power-on? (patch in coreboot upstream?)
+@item
+ask gnutoo about fallback patches (counts number of boots)
+@end itemize
+
+@item
+General tips/advice and web links showing how to detect physical intrusions.
+@item
+For example: @uref{http://cs.tau.ac.il/~tromer/acoustic/,http://cs.tau.ac.il/~tromer/acoustic/} or @uref{http://cyber.bgu.ac.il/content/how-leak-sensitive-data-isolated-computer-air-gap-near-mobile-phone-airhopper,http://cyber.bgu.ac.il/content/how-leak-sensitive-data-isolated-computer-air-gap-near-mobile-phone-airhopper}.
+@item
+@uref{https://en.wikipedia.org/wiki/Tempest_%28codename%29,https://en.wikipedia.org/wiki/Tempest_%28codename%29}
+@item
+https://gitorious.org/gnutoo-for-coreboot/grub-assemble/source/a61f636797777a742f65f4c9c58032aa6a9b23c3:
+@end itemize
+
+@node Extra notes
+@chapter Extra notes
+@anchor{#extra-notes}
+EC: Cannot be removed but can be mitigated: it contains non-free non-loadable code, but it has no access to the computer's RAM. It has access to the on-switch of the wifi, bluetooth, modem and some other power management features. The issue is that it has access to the keyboard, however if the software security howto @strong{(not yet written)} is followed correctly, it won't be able to leak data to a local attacker. It has no network access but it may still be able to leak data remotely, but that requires someone to be nearby to recover the data with the help of an SDR and some directional antennas@ref{#ref3,[3]}.
+
+@uref{http://www.coreboot.org/Intel_82573_Ethernet_controller,Intel 82573 Ethernet controller} on the X60 seems safe, according to Denis.
+@menu
+* Risk level::
+@end menu
+
+@node Risk level
+@section Risk level
+@anchor{#risk-level}
+@itemize
+@item
+Modem (3g/wwan): highest
+@item
+Intel wifi: Near highest
+@item
+Atheros PCI wifi: unknown, but lower than intel wifi.
+@item
+Microphone: only problematic if the computer gets compromised.
+@item
+Speakers: only problematic if the computer gets compromised.
+@item
+EC: can be mitigated if following the guide on software security.
+@end itemize
+
+@node Further reading material software security
+@chapter Further reading material (software security)
+@anchor{#further-reading-material-software-security}
+@itemize
+@item
+@uref{../gnulinux/encrypted_trisquel.html,Installing Trisquel GNU/Linux with full disk encryption (including /boot)}
+@item
+@uref{../gnulinux/encrypted_parabola.html,Installing Parabola GNU/Linux with full disk encryption (including /boot)}
+@item
+@uref{dock.html,Notes about DMA access and the docking station}
+@end itemize
+
+@node References
+@chapter References
+@anchor{#references}
+@menu
+* [1] physical access::
+* [2] microphone::
+* [3] Video CCC::
+@end menu
+
+@node [1] physical access
+@section [1] physical access
+@anchor{#physical-access}
+Explain that black hats, TAO, and so on might use a 0day to get in, and explain that in this case it mitigates what the attacker can do. Also the TAO do some evaluation before launching an attack: they take the probability of beeing caught into account, along with the kind of target. A 0day costs a lot of money, I heard that it was from 100000$ to 400000$, some other websites had prices 10 times lower but that but it was probably a typo. So if people increase their security it makes it more risky and more costly to attack people.
+
+@node [2] microphone
+@section [2] microphone
+@anchor{#microphone}
+It's possible to turn headphones into a microphone, you could try yourself, however they don't record loud at all. Also intel cards have the capability to change a connector's function, for instance the microphone jack can now become a headphone plug, that's called retasking. There is some support for it in GNU/Linux but it's not very well known.
+
+@node [3] Video CCC
+@section [3] Video (CCC)
+@anchor{#video-ccc}
+30c3-5356-en-Firmware_Fat_Camp_webm.webm from the 30th CCC. While their demo is experimental(their hardware also got damaged during the transport), the spies probably already have that since a long time. @uref{http://berlin.ftp.media.ccc.de/congress/2013/webm/30c3-5356-en-Firmware_Fat_Camp_webm.webm,http://berlin.ftp.media.ccc.de/congress/2013/webm/30c3-5356-en-Firmware_Fat_Camp_webm.webm}
+
+Copyright © 2014, 2015 Francis Rowe <info@@gluglug.org.uk>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye
diff --git a/docs/src/tasks.texi b/docs/src/tasks.texi
new file mode 100644
index 0000000..36b8f81
--- /dev/null
+++ b/docs/src/tasks.texi
@@ -0,0 +1,308 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title Libreboot task list
+@end titlepage
+
+@node Top
+@top Libreboot task list
+
+@menu
+* Libreboot task list::
+* Important tasks for the libreboot project::
+* Special news that affects libreboot::
+* Board ports::
+* Platform-specific bugs::
+* Flashing from lenovobios to libreboot and vice versa::
+* Build system::
+* Improvements to the utilities::
+* Documentation improvements::
+* Project institutional improvements::
+* EC firmware::
+@end menu
+
+@node Libreboot task list
+@chapter Libreboot task list
+@anchor{#libreboot-task-list}
+Back to @uref{index.html,index.html}.
+
+@node Important tasks for the libreboot project
+@chapter Important tasks for the libreboot project
+@anchor{#important-tasks-for-the-libreboot-project}
+This page is part of the git repository, so feel free to submit patches adding to or removing from this list. (adapting the HTML should be simple enough)
+
+@node Special news that affects libreboot
+@chapter Special news that affects libreboot
+@anchor{#special-news-that-affects-libreboot}
+@itemize
+@item
+Coreboot (upstream) is adopting a new release model. See @uref{http://www.coreboot.org/pipermail/coreboot/2015-July/080120.html,http://www.coreboot.org/pipermail/coreboot/2015-July/080120.html} - TODO: think about how this affects libreboot, and see what can be done to make effective use of this policy change.
+@end itemize
+
+@node Board ports
+@chapter Board ports
+@anchor{#board-ports}
+@itemize
+@item
+Someone linked to @uref{https://www.phoronix.com/scan.php?page=news_item&px=XGI-Coreboot-FB-Port,this news post} about a PCI-E graphics card for which a free VBIOS replacement exists. This card uses the same chipset as the onboard GPU in the ASUS KFSN4-DRE mainboard, which is already supported in libreboot. This graphics card will allow certain desktop motherboards to be viable in libreboot.
+@item
+@uref{https://lkml.org/lkml/2014/9/4/172,patch for linux (kernel) to add coreboot framebuffer support}
+@item
+Libreboot has so far been biased towards Intel. This needs to end (the sooner, the better). A nice start:
+@itemize
+@item
+TYAN S8230 is very similar to KGPE-D16, and could probably be ported based on the KGPE-D16. Same GPU too. @uref{http://tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=665&SKU=600000194,http://tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=665&SKU=600000194}
+@itemize
+@item
+W83627 (SuperIO) might have a public datasheet. Board-specific wiring (PCI interrupts, DIMM voltage selection). etc. Board seems to use socketed SOIC-8 SPI flash according to tpearson, based on photos available online - looks like a ZIF socket or something else, a clip retaining the chip.
+@item
+tpearson says: Tyan seems to have done the same thing as Asus did and built a whole lot of custom power control circuitry out of FETs. According to this person, this will take much effort to reverse engineer.
+@item
+IPMI firmware is non-free but optional (for iKVM feature, remote management like Intel ME). Not sure if add-on module or baked in. In either case, it might be removed or otherwise excluded because it's a HUGE backdoor. Unlike Intel ME, this isn't signed so can be removed, and also replaced theoretically. Is the protocol standard public? If so, might be easy/feasible to replace with free code. @uref{https://github.com/facebook/openbmc,https://github.com/facebook/openbmc} - also linked from @uref{https://raptorengineeringinc.com/coreboot/kgpe-d16-status.php,https://raptorengineeringinc.com/coreboot/kgpe-d16-status.php} - might be possible adapt this. - You might need to use the vendor tools running from under the proprietary BIOS to wipe the Flash chip holding the IPMI firmware, if it's baked in. (on KGPE-D16, it's an @uref{http://www.servethehome.com/wp-content/uploads/2013/03/ASUS-ASMB6-iKVM-Module.png,add-on card} so just don't add the add-on card - also SOIC-16 according to tpearson. but not sure what form factor used on S8230 - it better not be bl***y WSON).
+@item
+SAS controller requires firmware, but optional. (same thing on KGPE-D16). Board also has SATA, so it's fine. NOTE: SAS firmware is already flashed onto the SAS controller, to a dedicated chip. Not uploaded/handled by coreboot or linux kernel.
+@item
+tpearson says: power control circuits are a potential issue, not a definite one. it all depends on how Tyan decided to wire things up if they engineered things properly, it should actually be transparent. ASUS did not, and required work to get it going (see the notes document)
+@end itemize
+
+@item
+Lenovo G505S (works without CPU microcode updates). Videos BIOS is not yet fully replaced (openatom doesn't have a working framebuffer, yet, but it can draw a bitmap in user space, using a special utility) - @uref{https://github.com/alterapraxisptyltd/openatom,openatom in github}. SMU needs replacing (ruik/funfuctor/patrickg/mrnuke might be able to help).
+@item
+F2A85-M and E350M1 (libreboot_*_headless.rom). Test openatom (video BIOS replacement). SMU firmware is a problem. XHCI firmware is a problem.
+@item
+@itemize
+@item
+ASUS Chromebook C201 was added, but there are also other RK3288 based devices in coreboot. Port them all!
+@item
+Other ARM based systems; tegra124 chromebooks, Jetson TK1 (non-free GPU microcode in kernel needs replacing. also xhci firmware, but optional (can still use ehci, we think))
+@end itemize
+
+@item
+@strong{This list needs to expand!}
+@end itemize
+
+@item
+That doesn't mean Intel is off the table just yet:
+@itemize
+@item
+Intel D510MO motherboard (desktop), pineview chipset. damo22 got raminit working, and is working on finishing the port for coreboot. southbridge NM10 (basically rebranded ich7). not sure about video init (does it have native graphics initialization?). TODO: review it for libreboot once damo22 pushes the code to coreboot for review. damo22 says it should work with several CPUs (Atom D510 D525 N5x etc - but he's unsure). TODO: find other boards similar that could be ported. damo22's one has an Intel Atom D510 CPU.
+@item
+ThinkPad W500: they all use switchable graphics (ATI+Intel). Unknown if PM45 is compatible with GM45.
+@item
+ThinkPad X61: ICH8, i965 lubko in #coreboot. @uref{https://github.com/lkundrak/coreboot/tree/x61,https://github.com/lkundrak/coreboot/tree/x61} - raminit still isn't done, there might be other parts that need to be finished (probably EC). This system comes with a ME, but it's optional like in GM45, and can be removed.
+@itemize
+@item
+T61: @uref{http://review.coreboot.org/#/c/8482/,http://review.coreboot.org/#/c/8482/}
+@end itemize
+
+@item
+ThinkPad R60, Z61 - probably very similar to X60/T60, with few modifications required (probably only the changes based on logs acquired by following @uref{http://www.coreboot.org/Motherboard_Porting_Guide,http://www.coreboot.org/Motherboard_Porting_Guide})
+@item
+Non-lenovo GM45 laptops:
+@itemize
+@end itemize
+
+@item
+@strong{Desktop} system: Dell Optiplex 755. There are @strong{lots} of these available online. ICH9. DDR2 RAM (needs work in coreboot). No EC (it's a desktop). It will require quite a bit of work in coreboot, but this is a very good candidate. The ME can probably be removed and disabled, using ich9gen without any modifications (or with few modifications). Where are the datasheets? Schematics?
+@end itemize
+
+@end itemize
+
+@ref{#pagetop,Back to top of page.}
+
+@node Platform-specific bugs
+@chapter Platform-specific bugs
+@anchor{#platform-specific-bugs}
+@itemize
+@item
+GM45: suspend stopped working recently in libreboot.git, but worked in 20150518. Do a git bisect of coreboot for the relevant commit IDs, then implement a fix.
+@item
+Several serious bugs exist on the ThinkPad R500, which makes the system virtually unusable. See @uref{hcl/r500/index.html#issues,hcl/r500/index.html#issues}.
+@item
+GM45: investigate S3/raminit on all models (CPU stepping/cpuid). See @uref{hcl/x200.html#ram_s3_microcode,hcl/x200.html#ram_s3_microcode}
+@item
+all thinkpads: When the system is running, plugging in an ethernet cable doesn't always work (no network), you have to try several times. Booting with an ethernet cable attached is reliable. Debug this and fix it.
+@item
+KFSN4-DRE: investigate the 30 second bootblock delay. @uref{hcl/kfsn4-dre.html#issues,More info}
+@item
+KFSN4-DRE: jittery text-mode graphics. @uref{hcl/kfsn4-dre.html#issues,More info}
+@item
+Fix these issues on GM45/GS45 targets:
+@itemize
+@item
+X200: text-mode is broken. only framebuffer graphics work. 880101121e0cef5df3afda075809e2fbacf68ffe is the commit in coreboot that added native graphics initialization for GM45. The commit message says that text mode should work. tpearson tested with this revision, and it didn't work in text mode, so it looks like text mode never worked at all. It could be that it did work before phcoder submitted it, but then they made more changes that broke text mode, and didn't realize this. This means that a bisect is not possible.
+@item
+X60: on the latest coreboot-libre update lately (during June 2015), keyboard works intermittently. Bisect and fix.
+@item
+X200/X60: battery drained even while system is "off" on some systems. investigate. Could just be the Ethernet controller waiting for a Wake-on-LAN frame. 'ethtool -s net0 wol d' disables wake on lan until the next boot. There are a lot of ways to make it permanent: netctl. systemd, udev, cron - wake on lan was tested, and isn't the issue. It is probably how coreboot handles power off state (see the code that handles power_on_after_fail)
+@item
+Sound (internal speaker) broken on T500 (works in lenovobios). external speaker/headphones work. - probably a different hda_verb - @strong{different HDA verbs are now used, test this again} - worked while system was disassambled, but booted (loose), stopped working when re-assembling. Not sure what's going on here.
+@item
+Fix remaining incompatible LCD panels in native graphics on T500 and T400. See @uref{hcl/gm45_lcd.html,hcl/gm45_lcd.html}. - EDID related, or difference in how VGA ROM does init. Investigate.
+@item
+T400/T500/R400 (tested on T400): UART (serial port) doesn't work. Investigate. (already tried enabling early h8 dock option. some RE with superiotool is needed). - kmalkki has an R400. This person said they can be contracted for it.
+@end itemize
+
+@item
+@strong{Finish all work listed in @uref{future/index.html,future/index.html}}
+@item
+Fix these issues on i945 targets (X60/T60/macbook21)
+@itemize
+@item
+i945: fix VRAM size (currently 8MB. should be 64MB). See @uref{future/index.html#i945_vram_size,future/index.html#i945_vram_size}.
+@item
+Fix remaining incompatible LCD panels in native graphics on T60. See @uref{future/index.html#lcd_i945_incompatibility,future/index.html#lcd_i945_incompatibility}. - EDID related, or difference in how VGA ROM does init. Investigate.
+@item
+i945: the intel video driver used to initialize the display without native graphics initialization and without the extracted video BIOS. It no longer does, so investigate why it does not, and fix the regression (fix has to be done in the kernel, Linux). See @uref{http://www.coreboot.org/pipermail/coreboot/2014-June/078104.html,http://www.coreboot.org/pipermail/coreboot/2014-June/078104.html} and @uref{http://www.coreboot.org/pipermail/coreboot/2014-June/078105.html,http://www.coreboot.org/pipermail/coreboot/2014-June/078105.html}
+@item
+Add fake_vbt tables on i945 systems (also GM45).
+@item
+Commit 26ca08caf81ad2dcc9c8246a743d82ffb464c767 in coreboot, see the while (1) loop that waits for the panel to power up on i945. This is an infinite loop if the panel doesn't power up. Fix it. Also, are there panels that don't power up? Test this, and fix it.
+@end itemize
+
+@item
+Look into the notes an @uref{http://www.thinkwiki.org/wiki/Problem_with_high_pitch_noises,http://www.thinkwiki.org/wiki/Problem_with_high_pitch_noises}
+@end itemize
+
+@ref{#pagetop,Back to top of page.}
+
+@node Flashing from lenovobios to libreboot and vice versa
+@chapter Flashing from lenovobios to libreboot (and vice versa)
+@anchor{#flashing-from-lenovobios-to-libreboot-and-vice-versa}
+@itemize
+@item
+mtjm says: francis7: please add this issue to your current tasks list (inspired by what GNUtoo-irssi wrote): have the script for flashing from Lenovo BIOS verify that the image is swapped (i.e. last 64 KiB is just 0xff bytes, second to last 64 KiB isn't) and fail before writing to flash if it isn't
+@item
+Implement everything outlined in @uref{hcl/gm45_remove_me.html#demefactory,hcl/gm45_remove_me.html#demefactory} and test it.
+@end itemize
+
+@ref{#pagetop,Back to top of page.}
+
+@node Build system
+@chapter Build system
+@anchor{#build-system}
+@itemize
+@item
+Patch the coreboot build system, so that version information is still reliably generated (e.g. in the logs), which is currently lacking because libreboot deletes the .git directory (because the git history contains the deleted blobs, so libreboot has to delete it). It could just be a small patch that hardcodes the coreboot version information, for that coreboot version, each time libreboot rebases on a new version of coreboot.@*@* patrickg says: francis7: we have you covered: have your libreboot script add a file ".coreboot-version" to the top-level directory, containing the appropriate version number information. that will be used if git describe doesn't work (eg. because .git is missing)
+@item
+Make memtest86+ build using coreboot's own crossgcc toolchain. Currently, memtest86+ doesn't even work at all when cross-compiled using the toolchain in x86-64 trisquel7
+@item
+Make libreboot (all of it!) build reproducibly. This is very important.
+@itemize
+@item
+Talk to h01ger in coreboot about the coreboot part (he did reproducible.debian.net/coreboot/coreboot.html
+@item
+h01ger says ------ fchmmr: please keep the reproducible-builds@@lists.alioth.debian.org mailing list posted - i'm aware of http://projects.mtjm.eu/work_packages/16 :-)
+@item
+@uref{https://reproducible.debian.net/coreboot/coreboot.html,https://reproducible.debian.net/coreboot/coreboot.html}
+@item
+check coreboot mailing list, eg: @uref{http://www.coreboot.org/pipermail/coreboot/2015-June/079994.html,http://www.coreboot.org/pipermail/coreboot/2015-June/079994.html}
+@item
+Check GRUB in Debian (or GRUB upstream) for how to make that reproducible if Debian has done this already (they are working on reproducible builds) - @strong{h01ger says reproducible.debian.net/grub2}
+@item
+@uref{https://wiki.debian.org/ReproducibleBuilds,https://wiki.debian.org/ReproducibleBuilds}
+@item
+Join #debian-reproducible on OFTC IRC.
+@item
+merged in master (coreboot) - pay attention to these, especially the fact that the reproducibility relies on git (libreboot uses coreboot without git, and the reason makes this unavoidable): @uref{http://review.coreboot.org/#/c/8616/,http://review.coreboot.org/#/c/8616/} @uref{http://review.coreboot.org/#/c/8617/,http://review.coreboot.org/#/c/8617/} @uref{http://review.coreboot.org/#/c/8618/,http://review.coreboot.org/#/c/8618/} @uref{http://review.coreboot.org/#/c/8619/,http://review.coreboot.org/#/c/8619/}
+@item
+not yet merged in master (coreboot: @uref{http://review.coreboot.org/#/c/10515/,http://review.coreboot.org/#/c/10515/} -- not really relevant yet, but will be in the future. (libreboot currently ignores SeaBIOS)
+@end itemize
+
+@end itemize
+
+@ref{#pagetop,Back to top of page.}
+
+@node Improvements to the utilities
+@chapter Improvements to the utilities
+@anchor{#improvements-to-the-utilities}
+@itemize
+@item
+Make ich9gen/ich9deblob portable. They both rely extensively on bitfields, and they assume little-endian; for instance, mapping a little endian file directly to a struct, instead of serializing/deserializing. Re-factor both utilities and make them fully portable.
+@item
+Make ich9gen/ich9deblob/demefactory show GPL license info via @emph{--version} argument.
+@item
+Adapt linux-libre deblob scripts for use with coreboot. Libreboot is already deblobbed using its own script, but updating it is still a bit too manual. linux-libre's deblob scripts do an excellent job and (adapted) will make it much easier to maintain coreboot-libre.
+@end itemize
+
+@ref{#pagetop,Back to top of page.}
+
+@node Documentation improvements
+@chapter Documentation improvements
+@anchor{#documentation-improvements}
+@itemize
+@item
+Next release after 20150518, relating to the ASUS KFSN4-DRE:
+@itemize
+@item
+Remove the notes in release.html that say @emph{NOTE: not in libreboot 20150518. Only in git, for now.}
+@item
+Remove the note in hcl/kfsn4-dre.html that says @emph{NOTE: This board is unsupported in libreboot 20150518. To use it in libreboot, for now, you must build for it from source using the libreboot git repository.}
+@item
+Remove the note in hcl/r500.html that says @emph{NOTE: This board is unsupported in libreboot 20150518. To use it in libreboot, for now, you must build for it from source using the libreboot git repository.}
+@end itemize
+
+@item
+Next release after 20150518: note, mention that ACPI brightness methods for X60/T60 work again.
+@item
+Get /proc/ioports for all hw logs. (this was added to Motherboard Porting Guide recently) - other instructions were also added there. basically, get whatever extra logs are desirable, for all systems.
+@item
+Add info about FTDI FT232H usbdebug (BBB could be used for this): @uref{http://review.coreboot.org/#/c/10063,http://review.coreboot.org/#/c/10063}
+@item
+Add information from hw registers on all boards. Get them for the following remaining boards: X60, T60, macbook21, R400
+@item
+Add guides for GM45 laptops in security/
+@item
+Add guides for GM45 laptops in hardware/
+@item
+Convert documentation to use Latex (or whatever the GNU project requires) as source.
+@item
+LPC (eg PLCC socket) flashing guide is needed: @uref{http://blogs.coreboot.org/files/2013/07/vultureprog_shuttle_sbs.jpg,image}, @uref{http://blogs.coreboot.org/files/2013/08/vultureprog_probing.jpg,image}, @uref{http://blogs.coreboot.org/files/2013/06/superboosted2.jpg,image} - work with mrnuke on getting info about vultureprog PLCC flashing into libreboot. Libreboot needs server boards. @uref{https://github.com/mrnuke/vultureprog,https://github.com/mrnuke/vultureprog}, @uref{https://github.com/mrnuke/qiprog,https://github.com/mrnuke/qiprog}, @uref{https://github.com/mrnuke/vultureprog-hardware,https://github.com/mrnuke/vultureprog-hardware}. He also uses the sigrok logic analyzer (free/libre): @uref{http://www.dx.com/p/logic-analyzer-w-dupont-lines-and-usb-cable-for-scm-black-148945,http://www.dx.com/p/logic-analyzer-w-dupont-lines-and-usb-cable-for-scm-black-148945}
+@end itemize
+
+@ref{#pagetop,Back to top of page.}
+
+@node Project institutional improvements
+@chapter Project (institutional) improvements
+@anchor{#project-institutional-improvements}
+@itemize
+@item
+Add proper guidelines for contributions, like @emph{Development Guidelines} on the coreboot wiki. For instance, require @emph{Sign-off-by} in all commits for libreboot. Consulting with the FSF about this (licensing@@fsf.org).
+@item
+@strong{Libreboot needs to be factory firmware, not the replacement. It needs to be *the* firmware. Consult with the openlunchbox project (and maybe others) on getting hardware manufactured with libreboot support (out of the box, from the factory).} - rhombus tech might be interesting to contact (also projects like novena, and so on). eg @uref{http://rhombus-tech.net/community_ideas/laptop_15in/news/,http://rhombus-tech.net/community_ideas/laptop_15in/news/} - also see @uref{http://elinux.org/Embedded_Open_Modular_Architecture/EOMA-68,http://elinux.org/Embedded_Open_Modular_Architecture/EOMA-68}
+@item
+Set up a routine (project-wise) for testing each system with the latest kernel version.
+@item
+Define properly how to maintain libreboot (things to look out for, things to do on a release). It's somewhat documented now, but it's not perfect. Delegate tasks (to people that are reliable).
+@end itemize
+
+@ref{#pagetop,Back to top of page.}
+
+@node EC firmware
+@chapter EC firmware
+@anchor{#ec-firmware}
+@uref{http://www.coreboot.org/Embedded_controller,http://www.coreboot.org/Embedded_controller} Replace this on all libreboot targets. Some laptops use an extra SPI flash chip for the EC, some have EC in the main chip, some don't use SPI flash at all but have the firmware inside the EC chip itself. If the EC has integrated flash then you need to be able to get to the pins on the chip or be able to program them over LPC or SPI (if they have that feature). The lenovo laptops currently supported in libreboot all use H8 EC chips (contains flash inside the chip). Read the datasheets on how to externally flash the EC. Most CrOS devices run with a free EC firmware (@uref{https://chromium.googlesource.com/chromiumos/platform/ec/+/master/chip/,https://chromium.googlesource.com/chromiumos/platform/ec/+/master/chip/}). - see @uref{http://blogs.coreboot.org/blog/2015/05/28/progress-gsoc-week-1/,http://blogs.coreboot.org/blog/2015/05/28/progress-gsoc-week-1/} (H8S EC, applies to thinkpads)
+
+@uref{https://github.com/lynxis/h8s-ec,https://github.com/lynxis/h8s-ec} @uref{https://events.ccc.de/congress/2010/Fahrplan/events/4174.en.html,https://events.ccc.de/congress/2010/Fahrplan/events/4174.en.html}
+
+@uref{https://archive.org/details/27c3-4174-en-the_hidden_nemesis,https://archive.org/details/27c3-4174-en-the_hidden_nemesis}
+
+T60? @uref{http://ec.gnost.info/ec-18s/ec.html,http://ec.gnost.info/ec-18s/ec.html}
+
+@ref{#pagetop,Back to top of page.}
+
+Copyright © 2014, 2015 Francis Rowe <info@@gluglug.org.uk>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye