diff options
Diffstat (limited to 'docs/install/index.html')
| -rw-r--r-- | docs/install/index.html | 24 |
1 files changed, 24 insertions, 0 deletions
diff --git a/docs/install/index.html b/docs/install/index.html index 894abd4..8b4703f 100644 --- a/docs/install/index.html +++ b/docs/install/index.html @@ -43,6 +43,7 @@ <li><a href="bbb_setup.html">Flashing the Gigabyte GA-G41M-ES2L (has 2 SOIC-8 chips, one is backup)</a></li> <li><a href="bbb_ehci.html">How to configure EHCI debugging on the BeagleBone Black</a></li> <li><a href="kgpe-d16.html">KGPE-D16 (needed if running the proprietary firmware, or to unbrick)</a></li> + <li><a href="kcma-d8.html">KCMA-D8 (needed if running the proprietary firmware, or to unbrick)</a></li> <li><a href="x60_unbrick.html">ThinkPad X60: Recovery guide</a></li> <li><a href="x60tablet_unbrick.html">ThinkPad X60 Tablet: Recovery guide</a></li> <li><a href="t60_unbrick.html">ThinkPad T60: Recovery guide</a></li> @@ -213,6 +214,29 @@ Do check the HCL entry: <a href="../hcl/kgpe-d16.html">../hcl/kgpe-d16.html</a> </p> + <h2>ASUS KCMA-D8?</h2> + + <p> + If you have the proprietary BIOS, you need to flash libreboot externally. + See <a href="kgpe-d16.html">kcma-d8.html</a>. + </p> + <p> + If you already have coreboot or libreboot installed, without write protection on the flash + chip, then you can do it in software (otherwise, see link above). + </p> + + <p> + <b> + DO NOT hot-swap the chip with your bare hands. Use a PDIP-8 + chip extractor. These can be found online. + See <a href="http://www.coreboot.org/Developer_Manual/Tools#Chip_removal_tools">http://www.coreboot.org/Developer_Manual/Tools#Chip_removal_tools</a> + </b> + </p> + + <p> + Do check the HCL entry: <a href="../hcl/kcma-d8.html">../hcl/kcma-d8.html</a> + </p> + <h2>Are you currently running libreboot (or coreboot)?</h2> <p> |