summaryrefslogtreecommitdiffstats
path: root/docs/install/bbb_setup.html
diff options
context:
space:
mode:
Diffstat (limited to 'docs/install/bbb_setup.html')
-rw-r--r--docs/install/bbb_setup.html4
1 files changed, 2 insertions, 2 deletions
diff --git a/docs/install/bbb_setup.html b/docs/install/bbb_setup.html
index e691c7d..94f5750 100644
--- a/docs/install/bbb_setup.html
+++ b/docs/install/bbb_setup.html
@@ -78,14 +78,14 @@
</p>
<p>
On 20-pin ATX PSUs, you can use pin 1 or 2 (orange) for 3.3V, and any of the ground/earth sources (black cables).
- Short PS_ON / Power on (green) to a ground (black. there is one right next to it) using a wire/paperclip/jumper then
+ Short PS_ON# / Power on (green) to a ground (black. there is one right next to it) using a wire/paperclip/jumper then
power on the PSU.
</p>
<p>
On newer 24-pin ATX PSUs, there is an additional 3.3V (orange) on pin 12.
</p>
<p>
- You only need one 3.3V supply and one ground for the flash chip, after grounding PS_ON to ground.
+ You only need one 3.3V supply and one ground for the flash chip, after grounding PS_ON# to ground.
Multiple 3.3V supplies means that you could theoretically power multiple flash chips at once with the
same PSU.
</p>