grub.cfg: simplify isolinux parsing to a single function

1 files changed, 15 insertions, 46 deletions

diff --git a/resources/grub/config/menuentries/common.cfg b/resources/grub/config/menuentries/common.cfg
index ef0bbef..3739b45 100644
--- a/resources/grub/config/menuentries/common.cfg
+++ b/resources/grub/config/menuentries/common.cfg
@@ -9,6 +9,16 @@ function switch_to_grub_config {
 		fi
 	done
 }
+function parse_isolinux_config {
+	set root=${1}
+	for p in /isolinux /syslinux; do
+		if [ -f "${p}${p}.cfg" ]; then
+			syslinux_configfile -i ${p}${p}.cfg
+		elif [ -f "/boot${p}${p}.cfg" ]; then
+			syslinux_configfile -i /boot${p}${p}.cfg
+		fi
+	done
+}
 menuentry 'Load Operating System (incl. fully encrypted disks)  [o]' --hotkey='o' {
 
 # GRUB handles (almost) every possible disk setup, but only the location of /boot is actually important,
@@ -67,65 +77,24 @@ menuentry 'Load Operating System (incl. fully encrypted disks)  [o]' --hotkey='o
 menuentry 'Parse ISOLINUX menu (AHCI)  [a]' --hotkey='a' {
 	for i in 0 1; do
 		# Check for filesystem on raw device without partition table (MBR/GPT), e.g. BTRFS or ZFS
-		set root=ahci${i}
-		for p in /isolinux /syslinux; do
-			if [ -f "${p}${p}.cfg" ]; then
-				syslinux_configfile -i ${p}${p}.cfg
-			elif [ -f "/boot${p}${p}.cfg" ]; then
-				syslinux_configfile -i /boot${p}${p}.cfg
-			fi
-		done
+		parse_isolinux_config ahci${i}
 		# Look for partitions
 		# GPT allows more than 4 partitions, /boot on /dev/sda7 is quite unlikely but still possible
-		for j in 0 1 2 3 4 5 6 7 8 9; do
-			set root="ahci${i},${j}"
-			for p in /isolinux /syslinux; do
-				if [ -f "${p}${p}.cfg" ]; then
-					syslinux_configfile -i ${p}${p}.cfg
-				elif [ -f "/boot${p}${p}.cfg" ]; then
-					syslinux_configfile -i /boot${p}${p}.cfg
-				fi
-			done
-		done
+		for j in 0 1 2 3 4 5 6 7 8 9; do parse_isolinux_config "ahci${i},${j}"; done
 	done
 }
 menuentry 'Parse ISOLINUX menu (USB)  [u]' --hotkey='u' {
 	for i in 0 1; do
 		# Check for filesystem on raw device without partition table (MBR/GPT), e.g. BTRFS or ZFS
-		set root=usb${i}
-		for p in /isolinux /syslinux; do
-			if [ -f "${p}${p}.cfg" ]; then
-				syslinux_configfile -i ${p}${p}.cfg
-			elif [ -f "/boot${p}${p}.cfg" ]; then
-				syslinux_configfile -i /boot${p}${p}.cfg
-			fi
-		done
+		parse_isolinux_config usb${i}
 		# Look for partitions
 		# GPT allows more than 4 partitions, /boot on /dev/sda7 is quite unlikely but still possible
-		for j in 0 1 2 3 4 5 6 7 8 9; do
-			set root=usb${i},${j}
-			for p in "/isolinux" "/syslinux"; do
-				if [ -f "${p}${p}.cfg" ]; then
-					syslinux_configfile -i ${p}${p}.cfg
-				elif [ -f "/boot${p}${p}.cfg" ]; then
-					syslinux_configfile -i /boot${p}${p}.cfg
-				fi
-			done
-		done
+		for j in 0 1 2 3 4 5 6 7 8 9; do parse_isolinux_config "usb${i},${j}"; done
 	done
 }
 menuentry 'Parse ISOLINUX menu (CD/DVD)  [d]' --hotkey='d' {
 	insmod ata
-	for x in ata0 ahci1; do
-		set root=${x}
-		for p in "/isolinux" "/syslinux"; do
-			if [ -f "${p}${p}.cfg" ]; then
-				syslinux_configfile -i ${p}${p}.cfg
-			elif [ -f "/boot${p}${p}.cfg" ]; then
-				syslinux_configfile -i /boot${p}${p}.cfg
-			fi
-		done
-	done
+	for x in ata0 ahci1; do parse_isolinux_config ${x}; done
 }
 menuentry 'Switch to grubtest.cfg  [t]' --hotkey='t' {
 	set root=cbfsdisk