diff options
author | Michał Masłowski <mtjm@mtjm.eu> | 2014-09-03 14:30:21 (EDT) |
---|---|---|
committer | Michał Masłowski <mtjm@mtjm.eu> | 2014-09-03 14:30:21 (EDT) |
commit | 96ca7ee67a36605a33de8d57eb8e8d3998bc6427 (patch) | |
tree | 07202c5fe7d366f50d9d17010f3bbf0a44c08ee8 /resources/flashrom/patch/flashchips.c_lenovobios_macronix | |
parent | 4e8051dfaa0ba5617961481056eb7e79d7b50861 (diff) | |
parent | 9a321884379a71b5f0986fdfb97a2b6c5bdccd8a (diff) | |
download | libreboot-96ca7ee67a36605a33de8d57eb8e8d3998bc6427.zip libreboot-96ca7ee67a36605a33de8d57eb8e8d3998bc6427.tar.gz libreboot-96ca7ee67a36605a33de8d57eb8e8d3998bc6427.tar.bz2 |
Merge libreboot-6b6.
Conflicts:
buildrom-withgrub
Diffstat (limited to 'resources/flashrom/patch/flashchips.c_lenovobios_macronix')
-rw-r--r-- | resources/flashrom/patch/flashchips.c_lenovobios_macronix | 1282 |
1 files changed, 1164 insertions, 118 deletions
diff --git a/resources/flashrom/patch/flashchips.c_lenovobios_macronix b/resources/flashrom/patch/flashchips.c_lenovobios_macronix index 9a7ec32..b614d7a 100644 --- a/resources/flashrom/patch/flashchips.c_lenovobios_macronix +++ b/resources/flashrom/patch/flashchips.c_lenovobios_macronix @@ -1382,7 +1382,7 @@ const struct flashchip flashchips[] = { .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, + .tested = TEST_OK_PR, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* routine is wrapper to probe_jedec (pm49fl00x.c) */ .block_erasers = @@ -1395,7 +1395,7 @@ const struct flashchip flashchips[] = { .block_erase = erase_chip_block_jedec, } }, - .unlock = unlock_49fl00x, + .unlock = unlock_regspace2_uniform_64k, .write = write_jedec_1, .read = read_memmapped, .voltage = {3000, 3600}, @@ -1994,7 +1994,7 @@ const struct flashchip flashchips[] = { .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_at25f, .probe_timing = TIMING_ZERO, .block_erasers = @@ -2477,7 +2477,7 @@ const struct flashchip flashchips[] = { /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ .feature_bits = FEATURE_OTP, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_at45db, .probe_timing = TIMING_ZERO, .block_erasers = @@ -3049,10 +3049,10 @@ const struct flashchip flashchips[] = { .model_id = ATMEL_AT49LH002, .total_size = 256, .page_size = 0, /* unused */ - .feature_bits = FEATURE_REGISTERMAP, /* TODO: LPC OK too? */ + .feature_bits = FEATURE_REGISTERMAP, .tested = TEST_UNTESTED, - .probe = probe_82802ab, /* TODO: 0xff cmd not documented? */ - .probe_timing = TIMING_FIXME, + .probe = probe_82802ab, + .probe_timing = TIMING_ZERO, .block_erasers = { { @@ -3062,16 +3062,88 @@ const struct flashchip flashchips[] = { {8 * 1024, 2}, {16 * 1024, 1}, }, - .block_erase = erase_block_82802ab, + .block_erase = NULL, /* TODO: Implement. */ }, { .eraseblocks = { {64 * 1024, 4}, }, + .block_erase = erase_block_82802ab, + }, + }, + .printlock = printlock_regspace2_block_eraser_0, + .unlock = unlock_regspace2_block_eraser_0, + .write = write_82802ab, + .read = read_memmapped, + .voltage = {3000, 3600}, + }, + + { + .vendor = "Atmel", + .name = "AT49LH00B4", + .bustype = BUS_LPC | BUS_FWH, /* A/A Mux */ + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT49LH00B4, + .total_size = 512, + .page_size = 0, /* unused */ + .feature_bits = FEATURE_REGISTERMAP, + .tested = TEST_UNTESTED, + .probe = probe_82802ab, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {8 * 1024, 2}, + {16 * 1024, 1}, + {32 * 1024, 1}, + {64 * 1024, 7}, + }, + .block_erase = NULL, /* TODO: Implement. */ + }, { + .eraseblocks = { + {64 * 1024, 8}, + }, + .block_erase = erase_block_82802ab, + }, + }, + .printlock = printlock_regspace2_block_eraser_0, + .unlock = unlock_regspace2_block_eraser_0, + .write = write_82802ab, + .read = read_memmapped, + .voltage = {3000, 3600}, + }, + + { + .vendor = "Atmel", + .name = "AT49LH004", + .bustype = BUS_LPC | BUS_FWH, /* A/A Mux */ + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT49LH004, + .total_size = 512, + .page_size = 0, /* unused */ + .feature_bits = FEATURE_REGISTERMAP, + .tested = TEST_UNTESTED, + .probe = probe_82802ab, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 7}, + {32 * 1024, 1}, + {8 * 1024, 2}, + {16 * 1024, 1}, + }, + .block_erase = erase_block_82802ab, + }, { + .eraseblocks = { + {64 * 1024, 8}, + }, .block_erase = NULL, /* TODO: Implement. */ }, }, - .printlock = NULL, /* TODO */ - .unlock = NULL, /* unlock_82802ab() not correct(?) */ + .printlock = printlock_regspace2_block_eraser_0, + .unlock = unlock_regspace2_block_eraser_0, .write = write_82802ab, .read = read_memmapped, .voltage = {3000, 3600}, @@ -3086,7 +3158,7 @@ const struct flashchip flashchips[] = { .total_size = 64, .page_size = 0, /* unused */ .feature_bits = 0, - .tested = TEST_OK_PR, + .tested = {.probe = OK, .read = OK, .erase = BAD, .write = BAD }, .probe = probe_jedec, /* FIXME! */ .probe_timing = TIMING_ZERO, .block_erasers = @@ -4797,7 +4869,7 @@ const struct flashchip flashchips[] = { .model_id = EON_EN29LV640B, .total_size = 8192, .page_size = 8192, - .feature_bits = 0, + .feature_bits = FEATURE_ADDR_SHIFTED, .tested = TEST_OK_PREW, .probe = probe_en29lv640b, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ @@ -4808,10 +4880,10 @@ const struct flashchip flashchips[] = { {8 * 1024, 8}, {64 * 1024, 127}, }, - .block_erase = erase_block_shifted_jedec, + .block_erase = erase_block_jedec, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_shifted_jedec, + .block_erase = erase_chip_block_jedec, }, }, .write = write_en29lv640b, @@ -4820,6 +4892,120 @@ const struct flashchip flashchips[] = { }, { + .vendor = "Eon", + .name = "EN29GL064(A)B", + .bustype = BUS_PARALLEL, + .manufacture_id = EON_ID, + .model_id = EON_EN29GL064B, + .total_size = 8192, + .page_size = 128 * 1024, /* actual page size is 16 */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec_29gl, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {8 * 1024, 8}, + {64 * 1024, 127}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Eon", + .name = "EN29GL064(A)T", + .bustype = BUS_PARALLEL, + .manufacture_id = EON_ID, + .model_id = EON_EN29GL064T, + .total_size = 8192, + .page_size = 128 * 1024, /* actual page size is 16 */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec_29gl, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 127}, + {8 * 1024, 8}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Eon", + .name = "EN29GL064H/L", + .bustype = BUS_PARALLEL, + .manufacture_id = EON_ID, + .model_id = EON_EN29GL064HL, + .total_size = 8192, + .page_size = 128 * 1024, /* actual page size is 16 */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec_29gl, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Eon", + .name = "EN29GL128", + .bustype = BUS_PARALLEL, + .manufacture_id = EON_ID, + .model_id = EON_EN29GL128HL, + .total_size = 16384, + .page_size = 128 * 1024, /* actual page size is 16 */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec_29gl, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {128 * 1024, 128} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {16 * 1024 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {2700, 3600}, + }, + + { .vendor = "Fujitsu", .name = "MBM29F004BC", .bustype = BUS_PARALLEL, @@ -4892,10 +5078,10 @@ const struct flashchip flashchips[] = { .model_id = FUJITSU_MBM29F400BC, .total_size = 512, .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_EITHER_RESET, + .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, - .probe = probe_m29f400bt, - .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (m29f400bt.c) */ + .probe = probe_jedec, + .probe_timing = 10, // FIXME: check datasheet. Using the 10 us from probe_m29f400bt .block_erasers = { { @@ -4905,13 +5091,13 @@ const struct flashchip flashchips[] = { {32 * 1024, 1}, {64 * 1024, 7}, }, - .block_erase = erase_block_shifted_jedec, + .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_shifted_jedec, + .block_erase = erase_chip_block_jedec, }, }, - .write = write_m29f400bt, + .write = write_jedec_1, .read = read_memmapped, .voltage = {4750, 5250}, /* 4.75-5.25V for type -55, others 4.5-5.5V */ }, @@ -4924,10 +5110,10 @@ const struct flashchip flashchips[] = { .model_id = FUJITSU_MBM29F400TC, .total_size = 512, .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_EITHER_RESET, + .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_ADDR_AAA | FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, - .probe = probe_m29f400bt, - .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (m29f400bt.c) */ + .probe = probe_jedec, + .probe_timing = 10, // FIXME: check datasheet. Using the 10 us from probe_m29f400bt .block_erasers = { { @@ -4937,13 +5123,13 @@ const struct flashchip flashchips[] = { {8 * 1024, 2}, {16 * 1024, 1}, }, - .block_erase = erase_block_shifted_jedec, + .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_shifted_jedec, + .block_erase = erase_chip_block_jedec, }, }, - .write = write_m29f400bt, + .write = write_jedec_1, .read = read_memmapped, .voltage = {4750, 5250}, /* 4.75-5.25V for type -55, others 4.5-5.5V */ }, @@ -4958,8 +5144,8 @@ const struct flashchip flashchips[] = { .page_size = 0, .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, - .probe = probe_m29f400bt, - .probe_timing = TIMING_IGNORED, + .probe = probe_jedec, + .probe_timing = 10, // FIXME: check datasheet. Using the 10 us from probe_m29f400bt .block_erasers = { { @@ -4969,13 +5155,13 @@ const struct flashchip flashchips[] = { {32 * 1024, 1}, {64 * 1024, 31}, }, - .block_erase = erase_block_shifted_jedec, + .block_erase = erase_block_jedec, }, { .eraseblocks = { {2048 * 1024, 1} }, - .block_erase = erase_chip_block_shifted_jedec, + .block_erase = erase_chip_block_jedec, }, }, - .write = write_m29f400bt, /* Supports a fast mode too */ + .write = write_jedec_1, /* Supports a fast mode too */ .read = read_memmapped, .voltage = {3000, 3600}, /* 3.0-3.6V for type -70, others 2.7-3.6V */ }, @@ -4990,8 +5176,8 @@ const struct flashchip flashchips[] = { .page_size = 0, .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, - .probe = probe_m29f400bt, - .probe_timing = TIMING_IGNORED, + .probe = probe_jedec, + .probe_timing = 10, // FIXME: check datasheet. Using the 10 us from probe_m29f400bt .block_erasers = { { @@ -5001,13 +5187,13 @@ const struct flashchip flashchips[] = { {8 * 1024, 2}, {16 * 1024, 1}, }, - .block_erase = erase_block_shifted_jedec, + .block_erase = erase_block_jedec, }, { .eraseblocks = { {2048 * 1024, 1} }, - .block_erase = erase_chip_block_shifted_jedec, + .block_erase = erase_chip_block_jedec, }, }, - .write = write_m29f400bt, /* Supports a fast mode too */ + .write = write_jedec_1, /* Supports a fast mode too */ .read = read_memmapped, .voltage = {3000, 3600}, /* 3.0-3.6V for type -70, others 2.7-3.6V */ }, @@ -5247,7 +5433,7 @@ const struct flashchip flashchips[] = { .page_size = 256, /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 (B version only) */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -5979,7 +6165,7 @@ const struct flashchip flashchips[] = { .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_OK_PREW, + .tested = TEST_OK_PR, .probe = probe_82802ab, .probe_timing = TIMING_IGNORED, /* routine does not use probe_timing (82802ab.c) */ .block_erasers = @@ -5989,7 +6175,7 @@ const struct flashchip flashchips[] = { .block_erase = erase_block_82802ab, }, }, - .unlock = unlock_82802ab, + .unlock = unlock_regspace2_uniform_64k, .write = write_82802ab, .read = read_memmapped, .voltage = {3000, 3600}, @@ -6014,13 +6200,143 @@ const struct flashchip flashchips[] = { .block_erase = erase_block_82802ab, }, }, - .unlock = unlock_82802ab, + .unlock = unlock_regspace2_uniform_64k, .write = write_82802ab, .read = read_memmapped, .voltage = {3000, 3600}, }, { + .vendor = "ISSI", + .name = "IS29GL064B", + .bustype = BUS_PARALLEL, + .manufacture_id = ISSI_ID, + .model_id = ISSI_PMC_IS29GL064B, + .total_size = 8192, + .page_size = 128 * 1024, /* actual page size is 16 */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec_29gl, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {8 * 1024, 8}, + {64 * 1024, 127}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {2700, 3600}, + }, + + { + .vendor = "ISSI", + .name = "IS29GL064T", + .bustype = BUS_PARALLEL, + .manufacture_id = ISSI_ID, + .model_id = ISSI_PMC_IS29GL064T, + .total_size = 8192, + .page_size = 128 * 1024, /* actual page size is 16 */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec_29gl, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 127}, + {8 * 1024, 8}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {2700, 3600}, + }, + + { + .vendor = "ISSI", + .name = "IS29GL064H/L", + .bustype = BUS_PARALLEL, + .manufacture_id = ISSI_ID, + .model_id = ISSI_PMC_IS29GL064HL, + .total_size = 8192, + .page_size = 128 * 1024, /* actual page size is 16 */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec_29gl, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {2700, 3600}, + }, + + { + .vendor = "ISSI", + .name = "IS29GL128H/L", + .bustype = BUS_PARALLEL, + .manufacture_id = ISSI_ID, + .model_id = ISSI_PMC_IS29GL128HL, + .total_size = 16384, + .page_size = 128 * 1024, /* actual page size is 16 */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec_29gl, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {128 * 1024, 128} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {16 * 1024 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Macronix", + .name = "MX23L1654", + .bustype = BUS_SPI, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX23L1654, + .total_size = 2048, + .page_size = 256, + .tested = {.probe = NT, .read = NT, .erase = NA, .write = NA}, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .write = NULL, /* MX23L1654 is a mask ROM, so it is read-only */ + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {3000, 3600}, + }, + + { .vendor = "Macronix", .name = "MX23L3254", .bustype = BUS_SPI, @@ -6038,6 +6354,38 @@ const struct flashchip flashchips[] = { { .vendor = "Macronix", + .name = "MX23L6454", + .bustype = BUS_SPI, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX23L6454, + .total_size = 8192, + .page_size = 256, + .tested = {.probe = NT, .read = NT, .erase = NA, .write = NA}, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .write = NULL, /* MX23L6454 is a mask ROM, so it is read-only */ + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {3000, 3600}, + }, + + { + .vendor = "Macronix", + .name = "MX23L12854", + .bustype = BUS_SPI, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX23L12854, + .total_size = 16384, + .page_size = 256, + .tested = {.probe = NT, .read = NT, .erase = NA, .write = NA}, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .write = NULL, /* MX23L12854 is a mask ROM, so it is read-only */ + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {3000, 3600}, + }, + + { + .vendor = "Macronix", .name = "MX25L512(E)/MX25V512(C)", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, @@ -6327,7 +6675,7 @@ const struct flashchip flashchips[] = { .block_erase = spi_block_erase_c7, }, }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: Continously Program (CP) mode */ + .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: Continuously Program (CP) mode */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_1, .read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */ @@ -6866,6 +7214,46 @@ const struct flashchip flashchips[] = { { .vendor = "Macronix", + .name = "MX25U12835F", + .bustype = BUS_SPI, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX25U12835E, + .total_size = 16384, + .page_size = 256, + /* OTP: 512B total; enter 0xB1, exit 0xC1 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 4096} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 512} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 256} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {16 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {16 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + /* TODO: security register */ + .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ + .unlock = spi_disable_blockprotect_bp3_srwd, + .write = spi_chip_write_256, /* Multi I/O supported */ + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {1650, 2000}, + }, + + { + .vendor = "Macronix", .name = "MX29F001B", .bustype = BUS_PARALLEL, .manufacture_id = MACRONIX_ID, @@ -6996,6 +7384,70 @@ const struct flashchip flashchips[] = { { .vendor = "Macronix", + .name = "MX29F022(N)B", + .bustype = BUS_PARALLEL, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX29F022B, + .total_size = 256, + .page_size = 0, /* unused */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {16 * 1024, 1}, + {8 * 1024, 2}, + {32 * 1024, 1}, + {64 * 1024, 3}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "Macronix", + .name = "MX29F022(N)T", + .bustype = BUS_PARALLEL, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX29F022T, + .total_size = 256, + .page_size = 0, /* unused */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 3}, + {32 * 1024, 1}, + {8 * 1024, 2}, + {16 * 1024, 1}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "Macronix", .name = "MX29F040", .bustype = BUS_PARALLEL, .manufacture_id = MACRONIX_ID, @@ -7023,6 +7475,207 @@ const struct flashchip flashchips[] = { { .vendor = "Macronix", + .name = "MX29GL320EB", + .bustype = BUS_PARALLEL, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX29GL320EB, + .total_size = 4096, + .page_size = 128 * 1024, /* actual page size is 16 */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec_29gl, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {8 * 1024, 8}, + {64 * 1024, 63}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Macronix", + .name = "MX29GL320ET", + .bustype = BUS_PARALLEL, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX29GL320ET, + .total_size = 4096, + .page_size = 128 * 1024, /* actual page size is 16 */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec_29gl, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 63}, + {8 * 1024, 8}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Macronix", + .name = "MX29GL320EH/L", + .bustype = BUS_PARALLEL, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX29GL320EHL, + .total_size = 4096, + .page_size = 128 * 1024, /* actual page size is 16 */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec_29gl, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Macronix", + .name = "MX29GL640EB", + .bustype = BUS_PARALLEL, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX29GL640EB, + .total_size = 8192, + .page_size = 128 * 1024, /* actual page size is 16 */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec_29gl, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {8 * 1024, 8}, + {64 * 1024, 127}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Macronix", + .name = "MX29GL640ET", + .bustype = BUS_PARALLEL, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX29GL640ET, + .total_size = 8192, + .page_size = 128 * 1024, /* actual page size is 16 */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec_29gl, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 127}, + {8 * 1024, 8}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Macronix", + .name = "MX29GL640EH/L", + .bustype = BUS_PARALLEL, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX29GL640EHL, + .total_size = 8192, + .page_size = 128 * 1024, /* actual page size is 16 */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec_29gl, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Macronix", + .name = "MX29GL128F", + .bustype = BUS_PARALLEL, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX29GL128F, + .total_size = 16384, + .page_size = 128 * 1024, /* actual page size is 16 */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec_29gl, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {128 * 1024, 128} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {16 * 1024 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Macronix", .name = "MX29LV040", .bustype = BUS_PARALLEL, .manufacture_id = MACRONIX_ID, @@ -7036,7 +7689,7 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {64 * 1024, 8}, }, + .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, @@ -9098,7 +9751,7 @@ const struct flashchip flashchips[] = { .total_size = 256, .page_size = 16 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, + .tested = TEST_OK_PR, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* routine is wrapper to probe_jedec (pm49fl00x.c) */ .block_erasers = @@ -9114,7 +9767,7 @@ const struct flashchip flashchips[] = { .block_erase = erase_chip_block_jedec, } }, - .unlock = unlock_49fl00x, + .unlock = unlock_regspace2_uniform_32k, .write = write_jedec_1, .read = read_memmapped, .voltage = {3000, 3600}, @@ -9129,7 +9782,7 @@ const struct flashchip flashchips[] = { .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, + .tested = TEST_OK_PR, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* routine is wrapper to probe_jedec (pm49fl00x.c) */ .block_erasers = @@ -9145,7 +9798,7 @@ const struct flashchip flashchips[] = { .block_erase = erase_chip_block_jedec, } }, - .unlock = unlock_49fl00x, + .unlock = unlock_regspace2_uniform_64k, .write = write_jedec_1, .read = read_memmapped, .voltage = {3000, 3600}, @@ -9458,7 +10111,7 @@ const struct flashchip flashchips[] = { .block_erase = NULL, /* 30 D0, only in A/A mux mode */ }, }, - .unlock = unlock_82802ab, + .unlock = unlock_regspace2_uniform_64k, .write = write_82802ab, .read = read_memmapped, .voltage = {3000, 3600}, @@ -9637,9 +10290,9 @@ const struct flashchip flashchips[] = { } }, .printlock = spi_prettyprint_status_register_bp3_srwd, - .unlock = spi_disable_blockprotect_bp3_srwd, /* #WP pin write-protects SRWP bit. */ + .unlock = spi_disable_blockprotect_bp3_srwd, /* #WP pin write-protects SRWP bit. */ .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B), dual I/O (0x3B) supported */ + .read = spi_chip_read, /* Fast read (0x0B) and dual I/O (0x3B) supported */ .voltage = {2700, 3600}, }, @@ -9671,15 +10324,15 @@ const struct flashchip flashchips[] = { } }, .printlock = spi_prettyprint_status_register_bp3_srwd, - .unlock = spi_disable_blockprotect_bp3_srwd, /* #WP pin write-protects SRWP bit. */ + .unlock = spi_disable_blockprotect_bp3_srwd, /* #WP pin write-protects SRWP bit. */ .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B), dual I/O (0x3B) supported */ + .read = spi_chip_read, /* Fast read (0x0B) and dual I/O (0x3B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Spansion", - .name = "S25FL116K/S25FL216K", + .name = "S25FL116K/S25FL216K", /* FIXME: separate them */ .bustype = BUS_SPI, .manufacture_id = SPANSION_ID, .model_id = SPANSION_S25FL216, @@ -9706,9 +10359,9 @@ const struct flashchip flashchips[] = { } }, .printlock = spi_prettyprint_status_register_bp3_srwd, - .unlock = spi_disable_blockprotect_bp3_srwd, /* #WP pin write-protects SRWP bit. */ + .unlock = spi_disable_blockprotect_bp3_srwd, /* #WP pin write-protects SRWP bit. */ .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B), dual I/O (0x3B) supported */ + .read = spi_chip_read, /* Fast read (0x0B) and dual I/O (0x3B) supported */ .voltage = {2700, 3600}, }, @@ -9784,7 +10437,69 @@ const struct flashchip flashchips[] = { { .vendor = "Spansion", - .name = "S25FL128S......0", /* uniform 256kB sectors */ + .name = "S25FL128P......0", /* uniform 64 kB sectors */ + .bustype = BUS_SPI, + .manufacture_id = SPANSION_ID, + .model_id = SPANSION_S25FL128, + .total_size = 16384, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {64 * 1024, 256} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 256} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 16384 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { { 16384 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp3_srwd, + .unlock = spi_disable_blockprotect_bp3_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Spansion", + .name = "S25FL128P......1", /* uniform 256kB sectors */ + .bustype = BUS_SPI, + .manufacture_id = SPANSION_ID, + .model_id = SPANSION_S25FL128, + .total_size = 16384, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {256 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 16384 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, + .unlock = spi_disable_blockprotect_bp2_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Spansion", + .name = "S25FL128S......0", /* hybrid: 32 (top or bottom) 4 kB sub-sectors + 64 kB sectors */ .bustype = BUS_SPI, .manufacture_id = SPANSION_ID, .model_id = SPANSION_S25FL128, @@ -9798,9 +10513,48 @@ const struct flashchip flashchips[] = { .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 4096} }, + /* This chip supports erasing of the 32 so-called "parameter sectors" with + * opcode 0x20. Trying to access an address outside these 4kB blocks does + * have no effect on the memory contents, but sets a flag in the SR. + .eraseblocks = { + {4 * 1024, 32}, + {64 * 1024, 254} // inaccessible + }, .block_erase = spi_block_erase_20, + }, { */ + .eraseblocks = { { 64 * 1024, 256} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 16384 * 1024, 1} }, + .block_erase = spi_block_erase_60, }, { + .eraseblocks = { { 16384 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_ep_srwd, /* TODO: SR2 and many others */ + .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: various other locks */ + .write = spi_chip_write_256, /* Multi I/O supported */ + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Spansion", + .name = "S25FL128S......1", /* uniform 256 kB sectors */ + .bustype = BUS_SPI, + .manufacture_id = SPANSION_ID, + .model_id = SPANSION_S25FL128, + .total_size = 16384, + .page_size = 512, + /* supports 4B addressing */ + /* OTP: 1024B total, 32B reserved; read 0x4B; write 0x42 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { .eraseblocks = { {256 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { @@ -9819,6 +10573,86 @@ const struct flashchip flashchips[] = { }, { + .vendor = "Spansion", + .name = "S25FL129P......0", /* hybrid: 32 (top or bottom) 4 kB sub-sectors + 64 kB sectors */ + .bustype = BUS_SPI, + .manufacture_id = SPANSION_ID, + .model_id = SPANSION_S25FL128, + .total_size = 16384, + .page_size = 256, + /* OTP: 506B total, 16B reserved; read 0x4B; write 0x42 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + /* FIXME: This chip supports erasing of the 32 so-called "parameter sectors" with + * opcode 0x20. Trying to access an address outside these 4kB blocks does have no + * effect on the memory contents, but sets a flag in the SR. + .eraseblocks = { + {4 * 1024, 32}, + {64 * 1024, 254} // inaccessible + }, + .block_erase = spi_block_erase_20, + }, { */ + /* FIXME: Additionally it also supports erase opcode 40h for the respective 2*4 kB pairs + .eraseblocks = { + {8 * 1024, 16}, + {64 * 1024, 254} // inaccessible + }, + .block_erase = spi_block_erase_40, + }, { */ + .eraseblocks = { { 64 * 1024, 256} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 16384 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { { 16384 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_ep_srwd, /* TODO: Configuration register */ + .unlock = spi_disable_blockprotect_bp2_srwd, + .write = spi_chip_write_256, /* Multi I/O supported */ + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Spansion", + .name = "S25FL129P......1", /* uniform 256 kB sectors */ + .bustype = BUS_SPI, + .manufacture_id = SPANSION_ID, + .model_id = SPANSION_S25FL128, + .total_size = 16384, + .page_size = 512, + /* OTP: 506B total, 16B reserved; read 0x4B; write 0x42 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {256 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 16384 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { { 16384 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_ep_srwd, /* TODO: Configuration register */ + .unlock = spi_disable_blockprotect_bp2_srwd, + .write = spi_chip_write_256, /* Multi I/O supported */ + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, + }, + + { .vendor = "SST", .name = "SST25LF020A", .bustype = BUS_SPI, @@ -9916,10 +10750,10 @@ const struct flashchip flashchips[] = { { .vendor = "SST", - .name = "SST25VF512A", + .name = "SST25VF512(A)", .bustype = BUS_SPI, .manufacture_id = SST_ID, - .model_id = SST_SST25VF512A_REMS, + .model_id = SST_SST25VF512_REMS, .total_size = 64, .page_size = 256, .feature_bits = FEATURE_WRSR_EWSR, @@ -9936,25 +10770,25 @@ const struct flashchip flashchips[] = { .block_erase = spi_block_erase_52, }, { .eraseblocks = { {32 * 1024, 2} }, - .block_erase = spi_block_erase_d8, + .block_erase = spi_block_erase_d8, /* Supported by SST25VF512A only */ }, { .eraseblocks = { {64 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_c7, + .block_erase = spi_block_erase_c7, /* Supported by SST25VF512A only */ }, }, .printlock = spi_prettyprint_status_register_sst25, /* FIXME: No BP2 & 3 */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */ - .read = spi_chip_read, /* Fast read (0x0B) supported */ + .read = spi_chip_read, /* Fast read (0x0B) supported by SST25VF512A only */ .voltage = {2700, 3600}, }, { .vendor = "SST", - .name = "SST25VF010", + .name = "SST25VF010(A)", .bustype = BUS_SPI, .manufacture_id = SST_ID, .model_id = SST_SST25VF010_REMS, @@ -9974,19 +10808,19 @@ const struct flashchip flashchips[] = { .block_erase = spi_block_erase_52, }, { .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_d8, + .block_erase = spi_block_erase_d8, /* Supported by SST25VF010A only */ }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, + .block_erase = spi_block_erase_c7, /* Supported by SST25VF010A only */ }, }, .printlock = spi_prettyprint_status_register_sst25, /* FIXME: No BP2 & 3 */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */ - .read = spi_chip_read, /* Fast read (0x0B) supported */ + .read = spi_chip_read, /* Fast read (0x0B) supported by SST25VF010A only */ .voltage = {2700, 3600}, }, @@ -11000,7 +11834,8 @@ const struct flashchip flashchips[] = { .block_erase = erase_block_82802ab, } }, - .unlock = unlock_49lfxxxc, + .printlock = printlock_regspace2_block_eraser_1, + .unlock = unlock_regspace2_block_eraser_1, .write = write_82802ab, .read = read_memmapped, .voltage = {3000, 3600}, @@ -11065,7 +11900,8 @@ const struct flashchip flashchips[] = { .block_erase = erase_block_82802ab, } }, - .unlock = unlock_49lfxxxc, + .printlock = printlock_regspace2_block_eraser_1, + .unlock = unlock_regspace2_block_eraser_1, .write = write_82802ab, .read = read_memmapped, .voltage = {3000, 3600}, @@ -11080,7 +11916,7 @@ const struct flashchip flashchips[] = { .total_size = 2048, .page_size = 4 * 1024, .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_OK_PREW, + .tested = TEST_OK_PR, .probe = probe_82802ab, .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (sst49lfxxxc.c) */ .block_erasers = @@ -11098,7 +11934,8 @@ const struct flashchip flashchips[] = { .block_erase = erase_block_82802ab, } }, - .unlock = unlock_49lfxxxc, + .printlock = printlock_regspace2_block_eraser_1, + .unlock = unlock_regspace2_block_eraser_1, .write = write_82802ab, .read = read_memmapped, .voltage = {3000, 3600}, @@ -11203,7 +12040,7 @@ const struct flashchip flashchips[] = { .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_EITHER_RESET | FEATURE_REGISTERMAP, - .tested = TEST_OK_PREW, + .tested = TEST_OK_PR, .probe = probe_jedec, .probe_timing = 1, /* 150ns */ .block_erasers = @@ -11219,7 +12056,7 @@ const struct flashchip flashchips[] = { .block_erase = NULL, } }, - .unlock = unlock_82802ab, + .unlock = unlock_regspace2_uniform_64k, .write = write_jedec_1, .read = read_memmapped, .voltage = {3000, 3600}, @@ -11264,7 +12101,7 @@ const struct flashchip flashchips[] = { .total_size = 2048, .page_size = 4 * 1024, .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_OK_PRE, + .tested = TEST_OK_PR, .probe = probe_82802ab, .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (sst49lfxxxc.c) */ .block_erasers = @@ -11282,7 +12119,8 @@ const struct flashchip flashchips[] = { .block_erase = erase_block_82802ab, } }, - .unlock = unlock_49lfxxxc, + .printlock = printlock_regspace2_block_eraser_1, + .unlock = unlock_regspace2_block_eraser_1, .write = write_82802ab, .read = read_memmapped, .voltage = {3000, 3600}, @@ -11367,7 +12205,7 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {64 * 1024, 8}, }, + .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, @@ -11388,10 +12226,10 @@ const struct flashchip flashchips[] = { .model_id = ST_M29F400BB, .total_size = 512, .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_EITHER_RESET, + .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, - .probe = probe_m29f400bt, - .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (m29f400bt.c) */ + .probe = probe_jedec, + .probe_timing = 10, // FIXME: check datasheet. Using the 10 us from probe_m29f400bt .block_erasers = { { @@ -11401,13 +12239,13 @@ const struct flashchip flashchips[] = { {32 * 1024, 1}, {64 * 1024, 7}, }, - .block_erase = erase_block_shifted_jedec, + .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_shifted_jedec, + .block_erase = erase_chip_block_jedec, } }, - .write = write_m29f400bt, + .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -11420,10 +12258,10 @@ const struct flashchip flashchips[] = { .model_id = ST_M29F400BT, .total_size = 512, .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_EITHER_RESET, + .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, - .probe = probe_m29f400bt, - .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (m29f400bt.c) */ + .probe = probe_jedec, + .probe_timing = 10, // FIXME: check datasheet. Using the 10 us from probe_m29f400bt .block_erasers = { { @@ -11433,13 +12271,13 @@ const struct flashchip flashchips[] = { {8 * 1024, 2}, {16 * 1024, 1}, }, - .block_erase = erase_block_shifted_jedec, + .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_shifted_jedec, + .block_erase = erase_chip_block_jedec, } }, - .write = write_m29f400bt, + .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -11459,7 +12297,7 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {16 * 1024, 8}, }, + .eraseblocks = { {16 * 1024, 8} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {128 * 1024, 1} }, @@ -11486,7 +12324,7 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {64 * 1024, 8}, }, + .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, @@ -11545,12 +12383,12 @@ const struct flashchip flashchips[] = { }, .block_erase = erase_sector_stm50, }, { - .eraseblocks = { {64 * 1024, 8}, }, + .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_block_82802ab, } }, .write = write_82802ab, - .unlock = unlock_stm50_uniform, + .unlock = unlock_regspace2_uniform_64k, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ }, @@ -11578,12 +12416,12 @@ const struct flashchip flashchips[] = { }, .block_erase = erase_sector_stm50, }, { - .eraseblocks = { {64 * 1024, 8}, }, + .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_block_82802ab, } }, .write = write_82802ab, - .unlock = unlock_stm50_uniform, + .unlock = unlock_regspace2_uniform_64k, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ }, @@ -11597,7 +12435,7 @@ const struct flashchip flashchips[] = { .total_size = 1024, .page_size = 0, .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_OK_PRE, + .tested = TEST_OK_PR, .probe = probe_82802ab, .probe_timing = TIMING_FIXME, .block_erasers = @@ -11611,11 +12449,12 @@ const struct flashchip flashchips[] = { }, .block_erase = erase_sector_stm50, }, { - .eraseblocks = { {64 * 1024, 16}, }, + .eraseblocks = { {64 * 1024, 16} }, .block_erase = erase_block_82802ab, } }, - .unlock = unlock_stm50_nonuniform, + .printlock = printlock_regspace2_block_eraser_0, + .unlock = unlock_regspace2_block_eraser_0, .write = write_82802ab, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ @@ -11644,11 +12483,12 @@ const struct flashchip flashchips[] = { }, .block_erase = erase_sector_stm50, }, { - .eraseblocks = { {64 * 1024, 16}, }, + .eraseblocks = { {64 * 1024, 16} }, .block_erase = erase_block_82802ab, } }, - .unlock = unlock_stm50_nonuniform, + .printlock = printlock_regspace2_block_eraser_0, + .unlock = unlock_regspace2_block_eraser_0, .write = write_82802ab, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ @@ -11663,9 +12503,9 @@ const struct flashchip flashchips[] = { .total_size = 256, .page_size = 0, .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PR, .probe = probe_82802ab, - .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (sst49lfxxxc.c) */ + .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (82802ab.c) */ .block_erasers = { { @@ -11676,9 +12516,13 @@ const struct flashchip flashchips[] = { {16 * 1024, 1}, }, .block_erase = erase_block_82802ab, + }, { + .eraseblocks = { {256 * 1024, 1}, }, + .block_erase = NULL, /* Only in A/A mux mode */ } }, - .unlock = unlock_stm50_nonuniform, + .printlock = printlock_regspace2_block_eraser_0, + .unlock = unlock_regspace2_block_eraser_0, .write = write_82802ab, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ @@ -11699,11 +12543,11 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {64 * 1024, 32}, }, + .eraseblocks = { {64 * 1024, 32} }, .block_erase = erase_block_82802ab, } }, - .unlock = unlock_stm50_uniform, + .unlock = unlock_regspace2_uniform_64k, .write = write_82802ab, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ @@ -11724,11 +12568,11 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {64 * 1024, 8}, }, + .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_block_82802ab, } }, - .unlock = unlock_stm50_uniform, + .unlock = unlock_regspace2_uniform_64k, .write = write_82802ab, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ @@ -11743,17 +12587,17 @@ const struct flashchip flashchips[] = { .total_size = 1024, .page_size = 0, .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_OK_PREW, + .tested = TEST_OK_PR, .probe = probe_82802ab, .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (82802ab.c) */ .block_erasers = { { - .eraseblocks = { {64 * 1024, 16}, }, + .eraseblocks = { {64 * 1024, 16} }, .block_erase = erase_block_82802ab, } }, - .unlock = unlock_stm50_uniform, + .unlock = unlock_regspace2_uniform_64k, .write = write_82802ab, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ @@ -11774,11 +12618,11 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {64 * 1024, 16}, }, + .eraseblocks = { {64 * 1024, 16} }, .block_erase = erase_block_82802ab, } }, - .unlock = unlock_stm50_uniform, + .unlock = unlock_regspace2_uniform_64k, .write = write_82802ab, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ @@ -11809,7 +12653,8 @@ const struct flashchip flashchips[] = { .block_erase = erase_block_82802ab, } }, - .unlock = unlock_stm50_nonuniform, + .printlock = printlock_regspace2_block_eraser_0, + .unlock = unlock_regspace2_block_eraser_0, .write = write_82802ab, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ @@ -12868,6 +13713,207 @@ const struct flashchip flashchips[] = { { .vendor = "Winbond", + .name = "W29GL032CB", + .bustype = BUS_PARALLEL, + .manufacture_id = AMD_ID, /* WTF: "Industry Standard compatible Manufacturer ID code of 01h" */ + .model_id = WINBOND_W29GL032CB, + .total_size = 4096, + .page_size = 128 * 1024, /* actual page size is 16 */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec_29gl, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {8 * 1024, 8}, + {64 * 1024, 63}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Winbond", + .name = "W29GL032CT", + .bustype = BUS_PARALLEL, + .manufacture_id = AMD_ID, /* WTF: "Industry Standard compatible Manufacturer ID code of 01h" */ + .model_id = WINBOND_W29GL032CT, + .total_size = 4096, + .page_size = 128 * 1024, /* actual page size is 16 */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec_29gl, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 63}, + {8 * 1024, 8}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Winbond", + .name = "W29GL032CH/L", + .bustype = BUS_PARALLEL, + .manufacture_id = AMD_ID, /* WTF: "Industry Standard compatible Manufacturer ID code of 01h" */ + .model_id = WINBOND_W29GL032CHL, + .total_size = 4096, + .page_size = 128 * 1024, /* actual page size is 16 */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec_29gl, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Winbond", + .name = "W29GL064CB", + .bustype = BUS_PARALLEL, + .manufacture_id = AMD_ID, /* WTF: "Industry Standard compatible Manufacturer ID code of 01h" */ + .model_id = WINBOND_W29GL064CB, + .total_size = 8192, + .page_size = 128 * 1024, /* actual page size is 16 */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec_29gl, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {8 * 1024, 8}, + {64 * 1024, 127}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Winbond", + .name = "W29GL064CT", + .bustype = BUS_PARALLEL, + .manufacture_id = AMD_ID, /* WTF: "Industry Standard compatible Manufacturer ID code of 01h" */ + .model_id = WINBOND_W29GL064CT, + .total_size = 8192, + .page_size = 128 * 1024, /* actual page size is 16 */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec_29gl, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 127}, + {8 * 1024, 8}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Winbond", + .name = "W29GL064CH/L", + .bustype = BUS_PARALLEL, + .manufacture_id = AMD_ID, /* WTF: "Industry Standard compatible Manufacturer ID code of 01h" */ + .model_id = WINBOND_W29GL064CHL, + .total_size = 8192, + .page_size = 128 * 1024, /* actual page size is 16 */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec_29gl, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Winbond", + .name = "W29GL128C", + .bustype = BUS_PARALLEL, + .manufacture_id = AMD_ID, /* WTF: "Industry Standard compatible Manufacturer ID code of 01h" */ + .model_id = WINBOND_W29GL128CHL, + .total_size = 16384, + .page_size = 128 * 1024, /* actual page size is 16 */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec_29gl, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {128 * 1024, 128} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {16 * 1024 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Winbond", .name = "W39F010", .bustype = BUS_PARALLEL, .manufacture_id = WINBOND_ID, @@ -13077,7 +14123,7 @@ const struct flashchip flashchips[] = { .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, + .tested = TEST_OK_PR, .probe = probe_jedec, .probe_timing = 10, .block_erasers = @@ -13094,7 +14140,7 @@ const struct flashchip flashchips[] = { } }, .printlock = printlock_w39v040fa, - .unlock = unlock_sst_fwhub, + .unlock = unlock_regspace2_uniform_64k, .write = write_jedec_1, .read = read_memmapped, .voltage = {3000, 3600}, @@ -13109,7 +14155,7 @@ const struct flashchip flashchips[] = { .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, + .tested = TEST_OK_PR, .probe = probe_jedec, .probe_timing = 10, .block_erasers = @@ -13123,7 +14169,7 @@ const struct flashchip flashchips[] = { } }, .printlock = printlock_w39v040fb, - .unlock = unlock_w39v040fb, + .unlock = unlock_regspace2_uniform_64k, .write = write_jedec_1, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program */ @@ -13314,13 +14360,13 @@ const struct flashchip flashchips[] = { .total_size = 1024, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, + .tested = TEST_OK_PR, .probe = probe_jedec, .probe_timing = 10, .block_erasers = { { - .eraseblocks = { {64 * 1024, 16}, }, + .eraseblocks = { {64 * 1024, 16} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {1024 * 1024, 1} }, @@ -13328,7 +14374,7 @@ const struct flashchip flashchips[] = { } }, .printlock = printlock_w39v080fa, - .unlock = unlock_w39v080fa, + .unlock = unlock_regspace2_uniform_64k, .write = write_jedec_1, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program */ @@ -13349,7 +14395,7 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {64 * 1024, 8}, }, + .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, |