Documentation: implement theme, drastically improve readability

author: Francis Rowe <info@gluglug.org.uk> 2015-02-04 04:14:49 (EST)
committer: Francis Rowe <info@gluglug.org.uk> 2015-02-04 04:14:49 (EST)
commit: 4c3d46238022f0c9955ae7e8b10c9f1716dd871a (patch)
tree: 8639e21d93df6493d952bda5f324efbe4d89447f /docs/install
parent: 5b6f5884280657c8554035503ee2bde5d84a276c (diff)
download: libreboot-4c3d46238022f0c9955ae7e8b10c9f1716dd871a.zip
libreboot-4c3d46238022f0c9955ae7e8b10c9f1716dd871a.tar.gz
libreboot-4c3d46238022f0c9955ae7e8b10c9f1716dd871a.tar.bz2
6 files changed, 1181 insertions, 1113 deletions
diff --git a/docs/install/bbb_setup.html b/docs/install/bbb_setup.html
index 3ccebc7..ee2326f 100644
--- a/docs/install/bbb_setup.html
+++ b/docs/install/bbb_setup.html
@@ -13,70 +13,69 @@
 
 <body>
 
-	<header>
+	<div class="section">
 		<h1 id="pagetop">Setup the BeagleBone Black as an SPI flashrom programmer</h1>
-		<aside>How to use the BBB as an external flashrom programmer, for reading/writing an SPI flash chip.</aside>
-	</header>
+			<p>How to use the BBB as an external flashrom programmer, for reading/writing an SPI flash chip.</p>
+			<p><a href="index.html">Back to previous index</a></p>
+	</div>
 
-	<p>Or go <a href="index.html">back to main index</a></p>
+	<div class="section">
 
-<hr/>
-
-	<h1 id="hardware_requirements">Hardware requirements</h1>
-	
-		<p>
-			Shopping list (pictures of this hardware is shown later):
-		</p>
-			<ul>
-				<li>
-					External SPI programmer: <b>BeagleBone Black</b> (rev. C)
-					is highly recommended. Sometimes referred to as 'BBB'.
-				</li>
-				<li>
-					Clip for connecting to the flash chip: <b>Pomona 5250</b>
-					(SOIC-8) or <b>Pomona 5252</b> (SOIC-16) is recommended
-					(<b>X200S and X200 Tablet users will need a soldering iron
-					instead</b>, because of the type of package the flash chip is
-					in on those machines).
-				</li>
-				<li>
-					<b>External 3.3V DC power supply</b>. The one used by this
-					author has the label HF100W-SF-3.3 on it, but any decent
-					supply will be fine. Some people use the 3.3V from an ATX
-					PSU for instance (the kind that you get on a typical
-					Intel/AMD desktop computer. 6A supply should be fine,
-					the one used by this author is 20A (it won't actually use
-					that, it's just what the PSU is capable of).
-				</li>
-				<li>
-					Dupont <b>jumper cables</b> (2.54mm / 0.1&quot; headers)
-					You should get male-male, male-female and female-female
-					cables in 10cm and 20cm sizes. Just get a load of them.
-				</li>
-				<li>
-					<b>Mini USB A-B cable</b> (the BeagleBone probably already comes
-					with one.)
-				</li>
-				<li>
-					<b>FTDI serial board</b>, for unbricking the BeagleBone if
-					necessary.
-				</li>
-				<li>
-					<b>5V DC power supply</b> (from wall outlet to the BeagleBone).
-					The BeagleBone can have power supplied via USB, but a
-					dedicated power supply is recommended. 
-				</li>
-			</ul>
-	
-		<p>
-			<a href="#pagetop">Back to top of page.</a>
-		</p>
+		<h1 id="hardware_requirements">Hardware requirements</h1>
+		
+			<p>
+				Shopping list (pictures of this hardware is shown later):
+			</p>
+				<ul>
+					<li>
+						External SPI programmer: <b>BeagleBone Black</b> (rev. C)
+						is highly recommended. Sometimes referred to as 'BBB'.
+					</li>
+					<li>
+						Clip for connecting to the flash chip: <b>Pomona 5250</b>
+						(SOIC-8) or <b>Pomona 5252</b> (SOIC-16) is recommended
+						(<b>X200S and X200 Tablet users will need a soldering iron
+						instead</b>, because of the type of package the flash chip is
+						in on those machines).
+					</li>
+					<li>
+						<b>External 3.3V DC power supply</b>. The one used by this
+						author has the label HF100W-SF-3.3 on it, but any decent
+						supply will be fine. Some people use the 3.3V from an ATX
+						PSU for instance (the kind that you get on a typical
+						Intel/AMD desktop computer. 6A supply should be fine,
+						the one used by this author is 20A (it won't actually use
+						that, it's just what the PSU is capable of).
+					</li>
+					<li>
+						Dupont <b>jumper cables</b> (2.54mm / 0.1&quot; headers)
+						You should get male-male, male-female and female-female
+						cables in 10cm and 20cm sizes. Just get a load of them.
+					</li>
+					<li>
+						<b>Mini USB A-B cable</b> (the BeagleBone probably already comes
+						with one.)
+					</li>
+					<li>
+						<b>FTDI serial board</b>, for unbricking the BeagleBone if
+						necessary.
+					</li>
+					<li>
+						<b>5V DC power supply</b> (from wall outlet to the BeagleBone).
+						The BeagleBone can have power supplied via USB, but a
+						dedicated power supply is recommended. 
+					</li>
+				</ul>
+		
+			<p>
+				<a href="#pagetop">Back to top of page.</a>
+			</p>
+			
+	</div>
 		
-<hr/>
+	<div class="section">
 
-	<h1 id="configure_bbb">Configuring the BeagleBone Black</h1>
-	
-		<h2>Setting up the 3.3V DC PSU</h2>
+		<h1>Setting up the 3.3V DC PSU</h1>
 			<p>
 				With my PSU, first I had wire up the mains power cable. Any clover or kettle lead will do. Cut the end off (not the one
 				that goes in the wall, but the kettle/clover connector).
@@ -107,7 +106,12 @@
 				If you are using a different PSU, then the steps will change from those above. Anyway, once you are satisfied,
 				continue reading...
 			</p>
-		<h2>Setting up the BBB</h2>
+			
+	</div>
+	
+	<div class="section">
+		
+		<h1>Setting up the BBB</h1>
 			<p>
 				Your BBB will have an sshd with no password on root. Find it's IP address
 				(it will use DHCP by default) and set a root password. The steps below
@@ -265,9 +269,14 @@ Note: flashrom can never write if the flash chip isn't found automatically.
 				This means that it's working (the clip isn't connected to any flash chip,
 				so the error is fine).
 			</p>
-		<h2>
+			
+	</div>
+	
+	<div class="section">
+			
+		<h1>
 			Connecting the Pomona 5250/5252
-		</h2>
+		</h1>
 			<p>
 				Use this image for reference when connecting the pomona to the BBB:
 				<a href="http://beagleboard.org/Support/bone101#headers">http://beagleboard.org/Support/bone101#headers</a>
@@ -326,20 +335,24 @@ Note: flashrom can never write if the flash chip isn't found automatically.
 		<p>
 			<a href="#pagetop">Back to top of page.</a>
 		</p>
+		
+	</div>
 
-<hr/>
+	<div class="section">
 
-	<p>
-		Copyright &copy; 2014 Francis Rowe &lt;info@gluglug.org.uk&gt;<br/>
-		This document is released under the Creative Commons Attribution-ShareAlike 4.0 International Public License and all future versions.
-		A copy of the license can be found at <a href="../license.txt">../license.txt</a>.
-	</p>
+		<p>
+			Copyright &copy; 2014, 2015 Francis Rowe &lt;info@gluglug.org.uk&gt;<br/>
+			This document is released under the Creative Commons Attribution-ShareAlike 4.0 International Public License and all future versions.
+			A copy of the license can be found at <a href="../license.txt">../license.txt</a>.
+		</p>
 
-	<p>
-		This document is distributed in the hope that it will be useful,
-		but WITHOUT ANY WARRANTY; without even the implied warranty of
-		MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See <a href="../license.txt">../license.txt</a> for more information.
-	</p>
+		<p>
+			This document is distributed in the hope that it will be useful,
+			but WITHOUT ANY WARRANTY; without even the implied warranty of
+			MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See <a href="../license.txt">../license.txt</a> for more information.
+		</p>
+		
+	</div>
 
 </body>
 </html>
diff --git a/docs/install/index.html b/docs/install/index.html
index 313c724..60d9a73 100644
--- a/docs/install/index.html
+++ b/docs/install/index.html
@@ -13,17 +13,25 @@
 
 <body>
 
-	<h1 id="pagetop">Installing libreboot</h1>
-		<p>
-			This section relates to installing libreboot on supported targets.
-		</p>
-		<p>
-			Or <a href="../index.html">Back to main index</a>.
-		</p>
+	<div class="section">
+		
+		<h1 id="pagetop">Installing libreboot</h1>
+			<p>
+				This section relates to installing libreboot on supported targets.
+			</p>
+			<p>
+				<a href="../index.html">Back to previous index</a>
+			</p>
+			
+	</div>
+			
+	<div class="section">
+		
 		<h2>Setting up external programmers</h2>
 			<ul>
 				<li><a href="bbb_setup.html">Setup the BeagleBone Black as an SPI flashrom programmer</a></li>
 			</ul>
+			
 		<h2>Installing libreboot (software)</h2>
 			<ul>
 				<li><a href="#qemu">QEMU</a></li>
@@ -41,379 +49,396 @@
 				<li><a href="x200_external.html">ThinkPad X200: How to unbrick</a> (also the initial installation guide for this machine)</li>
 			</ul>
 			
-<hr/>
-
-	<h1 id="qemu">QEMU</h1>
-	
-		<p>
-			You don't really do anything here, just run (example):<br/>
-			$ <b>qemu-system-i386 -M pc -m 512 -bios bin/qemu_i440fx_piix4/qemu_i440fx_piix4_ukdvorak_vesafb.rom -serial stdio</b><br/>
-			$ <b>qemu-system-i386 -M q35 -m 512 -bios bin/qemu_q35_ich9/qemu_q35_ich9_ukdvorak_vesafb.rom -serial stdio</b>
-		</p>
-
-<hr/>
+	</div>
+		
+	<div class="section">
 
-	<h1 id="rom">Recommended ROMs to flash</h1>
-
-		<p>
-			List of directories corresponding to each board:
-		</p>
-			<ul>
-				<li>ThinkPad X60, X60s and X60 Tablet: <b>bin/x60/</b></li>
-				<li>ThinkPad T60: <b>bin/t60/</b> (note, see <a href="../hcl/index.html#supported_t60_list">../hcl/index.html#supported_t60_list</a>)</li>
-				<li>ThinkPad X200: <b>bin/x200_8mb/</b> (8MiB flash chip) or <b>bin/x200_4mb</b> (4MiB flash chip) (see <a href="../hcl/x200.html">../hcl/x200.html</a>)</li>
-				<li>Apple MacBook2,1: <b>bin/macbook21/</b></li>
-				<li>Apple MacBook1,1: <b>bin/macbook21/</b> (it's not a typo; the same ROMs work)</li>
-			</ul>
-
-		<p>These images use coreboot text-mode graphics:</p>
-			<ul>
-				<li>US Qwerty keyboard: <b><i>boardname</i>_usqwerty_txtmode.rom</b></li>
-				<li>UK Qwerty keyboard: <b><i>boardname</i>_ukqwerty_txtmode.rom</b></li>
-				<li>US Dvorak keyboard: <b><i>boardname</i>_usdvorak_txtmode.rom</b></li>
-				<li>UK Dvorak keyboard: <b><i>boardname</i>_ukdvorak_txtmode.rom</b></li>
-				<li>French Azerty keyboard: <b><i>boardname</i>_frazerty_txtmode.rom</b></li>
-				<li>French Dvorak (BEPO): <b><i>boardname</i>_frdvbepo_txtmode.rom</b></li>
-				<li>Italian Qwerty keyboard: <b><i>boardname</i>_itqwerty_txtmode.rom</b></li>
-				<li>Swedish Qwerty keyboard: <b><i>boardname</i>_svenska_txtmode.rom</b></li>
-			</ul>
-		<p>These images use coreboot framebuffer graphics:</p>
-			<ul>
-				<li>US Qwerty keyboard: <b><i>boardname</i>_usqwerty_vesafb.rom</b></li>
-				<li>UK Qwerty keyboard: <b><i>boardname</i>_ukqwerty_vesafb.rom</b></li>
-				<li>US Dvorak keyboard: <b><i>boardname</i>_usdvorak_vesafb.rom</b></li>
-				<li>UK Dvorak keyboard: <b><i>boardname</i>_ukdvorak_vesafb.rom</b></li>
-				<li>French Azerty keyboard: <b><i>boardname</i>_frazerty_vesafb.rom</b></li>
-				<li>French Dvorak (BEPO): <b><i>boardname</i>_frdvbepo_vesafb.rom</b></li>
-				<li>Italian Qwerty keyboard: <b><i>boardname</i>_itqwerty_vesafb.rom</b></li>
-				<li>Swedish Qwerty keyboard: <b><i>boardname</i>_svenska_vesafb.rom</b></li>
-			</ul>
+		<h1 id="qemu">QEMU</h1>
+		
+			<p>
+				You don't really do anything here, just run (example):<br/>
+				$ <b>qemu-system-i386 -M pc -m 512 -bios bin/qemu_i440fx_piix4/qemu_i440fx_piix4_ukdvorak_vesafb.rom -serial stdio</b><br/>
+				$ <b>qemu-system-i386 -M q35 -m 512 -bios bin/qemu_q35_ich9/qemu_q35_ich9_ukdvorak_vesafb.rom -serial stdio</b>
+			</p>
+			<p>
+				<a href="#pagetop">Back to top of page</a>.
+			</p>
 			
-		<p>
-			The boards for <i>boardname</i> in the examples above can be found by the names of the directories
-			in <b>./bin/</b> or <b>./resources/libreboot/config/</b>.
-		</p>
-
-		<p>
-			_txtmode images come with a working MemTest86+ and GRUB Invaders, both of which require text-mode.
-			_vesafb images are recommended in most cases.
-		</p>
-
-		<p>
-			This will give you your native keyboard layout inside GRUB. The preferences in your OS are not affected, it just makes using
-			the GRUB command line easier (if you ever need to do that).
-			<a href="../grub/index.html#grub_keyboard">../grub/index.html#grub_keyboard</a> shows you how this was done. If your native keyboard layout
-			differs, you can adapt those notes and hack the 'build' script for your needs.
-		</p>
-
-		<p><a href="#pagetop">Back to top of page.</a></p>
-
-<hr/>
+	</div>
 
-	<h1 id="flashrom_lenovobios">X60/X60S/X60T/T60: How to flash the ROMs onto your machine (if running Lenovo BIOS firmware).</h1>
+	<div class="section">
 
-		<div class="important">
+		<h1 id="rom">Recommended ROMs to flash</h1>
 
 			<p>
-				Hover over the next paragraph to make it black.
+				List of directories corresponding to each board:
 			</p>
-			<p class="lenovobios">
-				Following this guide means simply flashing a libreboot ROM. This guide will not (directly) teach you how to make a backup (dump) of the original Lenovo BIOS
-				because to do so would be to explicitly endorse proprietary software. However, for the purposes of reverse engineering it can be useful
-				to have a backup. Each copy of the original Lenovo BIOS is tied to the specific machine that it came from; it will not run
-				on any other machine, even if it's the same type of machine as yours. What this means is that, effectively, you can back it up now (so that you can
-				re-flash it later if you want to run the original Lenovo BIOS again) or lose it forever. The X60/T60 installation
-				guide on the coreboot wiki will show you how to do this: 
-				<a href="http://www.coreboot.org/Board:lenovo/x60/Installation">http://www.coreboot.org/Board:lenovo/x60/Installation</a>.<br/>
-				Do not make this decision lightly! This is your last and only chance.
+				<ul>
+					<li>ThinkPad X60, X60s and X60 Tablet: <b>bin/x60/</b></li>
+					<li>ThinkPad T60: <b>bin/t60/</b> (note, see <a href="../hcl/index.html#supported_t60_list">../hcl/index.html#supported_t60_list</a>)</li>
+					<li>ThinkPad X200: <b>bin/x200_8mb/</b> (8MiB flash chip) or <b>bin/x200_4mb</b> (4MiB flash chip) (see <a href="../hcl/x200.html">../hcl/x200.html</a>)</li>
+					<li>Apple MacBook2,1: <b>bin/macbook21/</b></li>
+					<li>Apple MacBook1,1: <b>bin/macbook21/</b> (it's not a typo; the same ROMs work)</li>
+				</ul>
+
+			<p>These images use coreboot text-mode graphics:</p>
+				<ul>
+					<li>US Qwerty keyboard: <b><i>boardname</i>_usqwerty_txtmode.rom</b></li>
+					<li>UK Qwerty keyboard: <b><i>boardname</i>_ukqwerty_txtmode.rom</b></li>
+					<li>US Dvorak keyboard: <b><i>boardname</i>_usdvorak_txtmode.rom</b></li>
+					<li>UK Dvorak keyboard: <b><i>boardname</i>_ukdvorak_txtmode.rom</b></li>
+					<li>French Azerty keyboard: <b><i>boardname</i>_frazerty_txtmode.rom</b></li>
+					<li>French Dvorak (BEPO): <b><i>boardname</i>_frdvbepo_txtmode.rom</b></li>
+					<li>Italian Qwerty keyboard: <b><i>boardname</i>_itqwerty_txtmode.rom</b></li>
+					<li>Swedish Qwerty keyboard: <b><i>boardname</i>_svenska_txtmode.rom</b></li>
+				</ul>
+			<p>These images use coreboot framebuffer graphics:</p>
+				<ul>
+					<li>US Qwerty keyboard: <b><i>boardname</i>_usqwerty_vesafb.rom</b></li>
+					<li>UK Qwerty keyboard: <b><i>boardname</i>_ukqwerty_vesafb.rom</b></li>
+					<li>US Dvorak keyboard: <b><i>boardname</i>_usdvorak_vesafb.rom</b></li>
+					<li>UK Dvorak keyboard: <b><i>boardname</i>_ukdvorak_vesafb.rom</b></li>
+					<li>French Azerty keyboard: <b><i>boardname</i>_frazerty_vesafb.rom</b></li>
+					<li>French Dvorak (BEPO): <b><i>boardname</i>_frdvbepo_vesafb.rom</b></li>
+					<li>Italian Qwerty keyboard: <b><i>boardname</i>_itqwerty_vesafb.rom</b></li>
+					<li>Swedish Qwerty keyboard: <b><i>boardname</i>_svenska_vesafb.rom</b></li>
+				</ul>
+				
+			<p>
+				The boards for <i>boardname</i> in the examples above can be found by the names of the directories
+				in <b>./bin/</b> or <b>./resources/libreboot/config/</b>.
 			</p>
 
 			<p>
-				The following is for the libreboot image and *not* the factory bios dump:
+				_txtmode images come with a working MemTest86+ and GRUB Invaders, both of which require text-mode.
+				_vesafb images are recommended in most cases.
 			</p>
+
 			<p>
-				Check the last two 64K regions in your ROM file (libreboot.rom in this example):<br/>
-				<b>$ dd if=libreboot.rom of=top64k.bin bs=1 skip=$[$(stat -c %s libreboot.rom) - 0x10000] count=64k</b><br/>
-				<b>$ dd if=libreboot.rom of=lower64k.bin bs=1 skip=$[$(stat -c %s libreboot.rom) - 0x20000] count=64k</b><br/>
-				<b>$ sha512sum lower64k.bin top64k.bin</b><br/>
-				Make *sure* that they match before you continue. The ROMs included pre-compiled in libreboot should already match.
-				If they don't match, then do this (based on those instructions from <a href="http://www.coreboot.org/Board:lenovo/x60/Installation">coreboot wiki</a>):<br/>
-				<b>$ dd if=top64k.bin of=libreboot.rom bs=1 seek=$[$(stat -c %s libreboot.rom) - 0x20000] count=64k conv=notrunc</b><br/>
-				After this, the ROM will be safe to flash. Explanation is provided in <a href="../git/index.html#build_bucts">../git/index.html#build_bucts</a>.
+				This will give you your native keyboard layout inside GRUB. The preferences in your OS are not affected, it just makes using
+				the GRUB command line easier (if you ever need to do that).
+				<a href="../grub/index.html#grub_keyboard">../grub/index.html#grub_keyboard</a> shows you how this was done. If your native keyboard layout
+				differs, you can adapt those notes and hack the 'build' script for your needs.
 			</p>
 
-		</div>
-
-		<p><b>This is for the ThinkPad X60 and T60 while running Lenovo BIOS. If you already have coreboot or libreboot running,
-		then go to <a href="#flashrom">#flashrom</a> instead!</b></p>
-
-		<p><b>If you are flashing a Lenovo ThinkPad T60, be sure to read <a href="../hcl/index.html#supported_t60_list">../hcl/index.html#supported_t60_list</a></b></p>
+			<p><a href="#pagetop">Back to top of page.</a></p>
+			
+	</div>
+
+	<div class="section">
+
+		<h1 id="flashrom_lenovobios">X60/X60S/X60T/T60: How to flash the ROMs onto your machine (if running Lenovo BIOS firmware).</h1>
+
+			<div class="important">
+
+				<p>
+					Hover over the next paragraph to make it black.
+				</p>
+				<p class="lenovobios">
+					Following this guide means simply flashing a libreboot ROM. This guide will not (directly) teach you how to make a backup (dump) of the original Lenovo BIOS
+					because to do so would be to explicitly endorse proprietary software. However, for the purposes of reverse engineering it can be useful
+					to have a backup. Each copy of the original Lenovo BIOS is tied to the specific machine that it came from; it will not run
+					on any other machine, even if it's the same type of machine as yours. What this means is that, effectively, you can back it up now (so that you can
+					re-flash it later if you want to run the original Lenovo BIOS again) or lose it forever. The X60/T60 installation
+					guide on the coreboot wiki will show you how to do this: 
+					<a href="http://www.coreboot.org/Board:lenovo/x60/Installation">http://www.coreboot.org/Board:lenovo/x60/Installation</a>.<br/>
+					Do not make this decision lightly! This is your last and only chance.
+				</p>
+
+				<p>
+					The following is for the libreboot image and *not* the factory bios dump:
+				</p>
+				<p>
+					Check the last two 64K regions in your ROM file (libreboot.rom in this example):<br/>
+					<b>$ dd if=libreboot.rom of=top64k.bin bs=1 skip=$[$(stat -c %s libreboot.rom) - 0x10000] count=64k</b><br/>
+					<b>$ dd if=libreboot.rom of=lower64k.bin bs=1 skip=$[$(stat -c %s libreboot.rom) - 0x20000] count=64k</b><br/>
+					<b>$ sha512sum lower64k.bin top64k.bin</b><br/>
+					Make *sure* that they match before you continue. The ROMs included pre-compiled in libreboot should already match.
+					If they don't match, then do this (based on those instructions from <a href="http://www.coreboot.org/Board:lenovo/x60/Installation">coreboot wiki</a>):<br/>
+					<b>$ dd if=top64k.bin of=libreboot.rom bs=1 seek=$[$(stat -c %s libreboot.rom) - 0x20000] count=64k conv=notrunc</b><br/>
+					After this, the ROM will be safe to flash. Explanation is provided in <a href="../git/index.html#build_bucts">../git/index.html#build_bucts</a>.
+				</p>
+
+			</div>
+
+			<p><b>This is for the ThinkPad X60 and T60 while running Lenovo BIOS. If you already have coreboot or libreboot running,
+			then go to <a href="#flashrom">#flashrom</a> instead!</b></p>
+
+			<p><b>If you are flashing a Lenovo ThinkPad T60, be sure to read <a href="../hcl/index.html#supported_t60_list">../hcl/index.html#supported_t60_list</a></b></p>
+
+			<div class="important">
+				<p>
+					<b>If you are using libreboot_src or git, then make sure that you built the sources first (see <a href="../git/index.html#build">../git/index.html#build</a>).</b>
+				</p>
+			</div>
+
+			<p>&quot;YOURBOARD/YOURROM&quot; should be replaced with what is correct as per <a href="#rom">#rom</a>. Alternatively
+			you may be using your own custom ROM. Adapt.</p>
 
-		<div class="important">
 			<p>
-				<b>If you are using libreboot_src or git, then make sure that you built the sources first (see <a href="../git/index.html#build">../git/index.html#build</a>).</b>
+				Run the script:<br/>
+				<b>$ sudo ./lenovobios_firstflash bin/<a href="#rom">YOURBOARD/YOURROM</a>.</b>
 			</p>
-		</div>
 
-		<p>&quot;YOURBOARD/YOURROM&quot; should be replaced with what is correct as per <a href="#rom">#rom</a>. Alternatively
-		you may be using your own custom ROM. Adapt.</p>
+			<div class="important">
 
-		<p>
-			Run the script:<br/>
-			<b>$ sudo ./lenovobios_firstflash bin/<a href="#rom">YOURBOARD/YOURROM</a>.</b>
-		</p>
+				<p>
+					You should see within the output the following:<br/>
+					<b>&quot;Updated BUC.TS=1 - 64kb address ranges at 0xFFFE0000 and 0xFFFF0000 are swapped&quot;</b>.
+				</p>
 
-		<div class="important">
+				<p>
+					You should also see within the output the following:<br/>
+					<b>&quot;Flash chip is in an unknown state&quot;</b>, <b>&quot;FAILED&quot;</b> and <b>&quot;DO NOT SHUTDOWN OR REBOOT&quot;</b><br/>
+					Seeing this means that the operation was a <b>resounding</b> success! <b>DON'T PANIC</b>.
+				</p>
 
-			<p>
-				You should see within the output the following:<br/>
-				<b>&quot;Updated BUC.TS=1 - 64kb address ranges at 0xFFFE0000 and 0xFFFF0000 are swapped&quot;</b>.
-			</p>
+				<p>
+					See this link for more details: 
+					<a href="http://thread.gmane.org/gmane.linux.bios.flashrom/575">http://thread.gmane.org/gmane.linux.bios.flashrom/575</a>.
+				</p>
 
-			<p>
-				You should also see within the output the following:<br/>
-				<b>&quot;Flash chip is in an unknown state&quot;</b>, <b>&quot;FAILED&quot;</b> and <b>&quot;DO NOT SHUTDOWN OR REBOOT&quot;</b><br/>
-				Seeing this means that the operation was a <b>resounding</b> success! <b>DON'T PANIC</b>.
-			</p>
+				<p>
+					If the above is what you see, then <b>SHUT DOWN</b>. Wait a few seconds, and then boot; libreboot is running, but there is a 2nd procedure <b>*needed*</b> (see below).
+				</p>
+
+			</div>
 
 			<p>
-				See this link for more details: 
-				<a href="http://thread.gmane.org/gmane.linux.bios.flashrom/575">http://thread.gmane.org/gmane.linux.bios.flashrom/575</a>.
+				<b>
+					If you boot and you see nothing, try turning up the backlight (Fn+Home).
+				</b>
 			</p>
 
 			<p>
-				If the above is what you see, then <b>SHUT DOWN</b>. Wait a few seconds, and then boot; libreboot is running, but there is a 2nd procedure <b>*needed*</b> (see below).
+				When you have booted up again:<br/>
+				<b>$ sudo ./lenovobios_secondflash bin/<a href="#rom">YOURBOARD/YOURROM</a></b>
 			</p>
 
-		</div>
+			<div class="important">
 
-		<p>
-			<b>
-				If you boot and you see nothing, try turning up the backlight (Fn+Home).
-			</b>
-		</p>
+				<p>
+					You should see within the output the following:<br/>
+					<b>&quot;Updated BUC.TS=0 - 128kb address range 0xFFFE0000-0xFFFFFFFF is untranslated&quot;</b>
+				</p>
 
-		<p>
-			When you have booted up again:<br/>
-			<b>$ sudo ./lenovobios_secondflash bin/<a href="#rom">YOURBOARD/YOURROM</a></b>
-		</p>
+				<p>
+					You should also see within the output the following:<br/>
+					<b>&quot;Verifying flash... VERIFIED.&quot;</b>
+				</p>
 
-		<div class="important">
+				<p>Shut down again, wait a few seconds, and then boot.</p>
 
-			<p>
-				You should see within the output the following:<br/>
-				<b>&quot;Updated BUC.TS=0 - 128kb address range 0xFFFE0000-0xFFFFFFFF is untranslated&quot;</b>
-			</p>
+			</div>
 
 			<p>
-				You should also see within the output the following:<br/>
-				<b>&quot;Verifying flash... VERIFIED.&quot;</b>
+				Some thinkpads come with WWAN cards installed, along with sim cards. These use non-free firmware and should be removed. 
+				You might also want to remove bluetooth. See <a href="../security/x60_security.html">../security/x60_security.html</a> and
+				<a href="../security/t60_security.html">../security/t60_security.html</a>.
 			</p>
 
-			<p>Shut down again, wait a few seconds, and then boot.</p>
+			<p><a href="#pagetop">Back to top of page.</a></p>
+			
+	</div>
 
-		</div>
+	<div class="section">
 
-		<p>
-			Some thinkpads come with WWAN cards installed, along with sim cards. These use non-free firmware and should be removed. 
-			You might also want to remove bluetooth. See <a href="../security/x60_security.html">../security/x60_security.html</a> and
-			<a href="../security/t60_security.html">../security/t60_security.html</a>.
-		</p>
+		<h1 id="flashrom_macbook21">macbook21: How to flash your ROM (if running Apple EFI firmware)</h1>
 
-		<p><a href="#pagetop">Back to top of page.</a></p>
+			<div class="important">
 
-<hr/>
+				<p>
+					Hover over the next paragraph to make it black.
+				</p>
+				<p class="lenovobios">
+					Following this guide means simply flashing a libreboot ROM. This guide will not (directly) teach you how to make a backup (dump) of the original Apple EFI firmware
+					because to do so would be to explicitly endorse proprietary software. However, for the purposes of reverse engineering it can be useful
+					to have a backup. Each copy of the original Apple EFI is (believed, but unproven to be) tied to the specific machine that it came from; it will not (as is believed) run
+					on any other machine, even if it's the same type of machine as yours. What this means is that, effectively, you can back it up now (so that you can
+					re-flash it later if you want to run the original Apple EFI firmware again) or lose it forever. The macbook21 installation
+					guide on the coreboot wiki will show you how to do this: 
+					<a href="http://www.coreboot.org/Board:apple/macbook21">http://www.coreboot.org/Board:apple/macbook21</a>.<br/>
+					Do not make this decision lightly! This is (very likely) your last and only chance.
+				</p>
 
-	<h1 id="flashrom_macbook21">macbook21: How to flash your ROM (if running Apple EFI firmware)</h1>
+				<p>
+					(this theory is untested at the time of writing)
+				</p>
 
-		<div class="important">
+				<p>
+					Note: <b>If you have a MacBook1,1 then these instructions will not work. See <a href="../hcl/index.html#macbook11">../hcl/index.html#macbook11</a> for MacBook1,1 flashing instructions.</b>
+				</p>
+
+			</div>
 
 			<p>
-				Hover over the next paragraph to make it black.
+				<b>
+					This is for the MacBook2,1 while running Apple EFI firmware. If you already have 
+					coreboot or libreboot running, then go to <a href="#flashrom">#flashrom</a> instead!
+				</b>
 			</p>
-			<p class="lenovobios">
-				Following this guide means simply flashing a libreboot ROM. This guide will not (directly) teach you how to make a backup (dump) of the original Apple EFI firmware
-				because to do so would be to explicitly endorse proprietary software. However, for the purposes of reverse engineering it can be useful
-				to have a backup. Each copy of the original Apple EFI is (believed, but unproven to be) tied to the specific machine that it came from; it will not (as is believed) run
-				on any other machine, even if it's the same type of machine as yours. What this means is that, effectively, you can back it up now (so that you can
-				re-flash it later if you want to run the original Apple EFI firmware again) or lose it forever. The macbook21 installation
-				guide on the coreboot wiki will show you how to do this: 
-				<a href="http://www.coreboot.org/Board:apple/macbook21">http://www.coreboot.org/Board:apple/macbook21</a>.<br/>
-				Do not make this decision lightly! This is (very likely) your last and only chance.
+
+			<p>
+				Be sure to read the information in <a href="../hcl/index.html#macbook21">../hcl/index.html#macbook21</a>.
 			</p>
 
+			<div class="important">
+				<p>
+					<b>If you are using libreboot_src or git, then make sure that you built the sources first (see <a href="../git/index.html#build">../git/index.html#build</a>).</b>
+				</p>
+			</div>
+
 			<p>
-				(this theory is untested at the time of writing)
+				Look at <a href="#rom">#rom</a> to see which ROM is suitable for your machine. Alternatively you may be using your own
+				custom ROM. Adapt.
 			</p>
 
 			<p>
-				Note: <b>If you have a MacBook1,1 then these instructions will not work. See <a href="../hcl/index.html#macbook11">../hcl/index.html#macbook11</a> for MacBook1,1 flashing instructions.</b>
+				Flashing is actually easy (compared to X60/T60).<br/>
+				<b>$ sudo flashrom -p internal:laptop=force_I_want_a_brick -w bin/<a href="#rom">YOURBOARD/YOURROM</a></b>
 			</p>
 
-		</div>
+			<p>
+				Alternatively, a script is provided which does the same thing:<br/>
+				<b>$ sudo ./macbook21_firstflash bin/<a href="#rom">YOURBOARD/YOURROM</a></b>
+			</p>
 
-		<p>
-			<b>
-				This is for the MacBook2,1 while running Apple EFI firmware. If you already have 
-				coreboot or libreboot running, then go to <a href="#flashrom">#flashrom</a> instead!
-			</b>
-		</p>
+			<div class="important">
 
-		<p>
-			Be sure to read the information in <a href="../hcl/index.html#macbook21">../hcl/index.html#macbook21</a>.
-		</p>
+				<p>
+					You should also see within the output the following:<br/>
+					<b>&quot;Verifying flash... VERIFIED.&quot;</b>
+				</p>
 
-		<div class="important">
-			<p>
-				<b>If you are using libreboot_src or git, then make sure that you built the sources first (see <a href="../git/index.html#build">../git/index.html#build</a>).</b>
-			</p>
-		</div>
+				<p>
+					If you see that, great! Shut down now (power off). Wait a few seconds and then boot!
+				</p>
 
-		<p>
-			Look at <a href="#rom">#rom</a> to see which ROM is suitable for your machine. Alternatively you may be using your own
-			custom ROM. Adapt.
-		</p>
+				<p>
+					<b>
+						If you boot and you see nothing, try turning up the backlight (F2 for macbook21). 
+					</b>
+				</p>
 
-		<p>
-			Flashing is actually easy (compared to X60/T60).<br/>
-			<b>$ sudo flashrom -p internal:laptop=force_I_want_a_brick -w bin/<a href="#rom">YOURBOARD/YOURROM</a></b>
-		</p>
 
-		<p>
-			Alternatively, a script is provided which does the same thing:<br/>
-			<b>$ sudo ./macbook21_firstflash bin/<a href="#rom">YOURBOARD/YOURROM</a></b>
-		</p>
+			</div>
+
+			<p><a href="#pagetop">Back to top of page.</a></p>
+			
+	</div>
 
-		<div class="important">
+	<div class="section">
+
+		<h1 id="flashrom">X60/X60S/X60T/T60/X200/macbook21: How to flash the ROMs onto your machine (if running libreboot or coreboot already)</h1>
 
 			<p>
-				You should also see within the output the following:<br/>
-				<b>&quot;Verifying flash... VERIFIED.&quot;</b>
+				<b>
+					These instructions work for the Lenovo ThinkPad X60/X60S/X60T/T60 and Apple MacBook2,1.
+				</b>
 			</p>
-
 			<p>
-				If you see that, great! Shut down now (power off). Wait a few seconds and then boot!
+				<b>
+					This assumes that you already have coreboot or libreboot running.
+				</b>
 			</p>
-
 			<p>
 				<b>
-					If you boot and you see nothing, try turning up the backlight (F2 for macbook21). 
+					If you have Lenovo BIOS running (X60/X60S/X60T/T60), go to <a href="#flashrom_lenovobios">#flashrom_lenovobios</a> instead.
 				</b>
 			</p>
-
-
-		</div>
-
-		<p><a href="#pagetop">Back to top of page.</a></p>
-
-<hr/>
-
-	<h1 id="flashrom">X60/X60S/X60T/T60/X200/macbook21: How to flash the ROMs onto your machine (if running libreboot or coreboot already)</h1>
-
-		<p>
-			<b>
-				These instructions work for the Lenovo ThinkPad X60/X60S/X60T/T60 and Apple MacBook2,1.
-			</b>
-		</p>
-		<p>
-			<b>
-				This assumes that you already have coreboot or libreboot running.
-			</b>
-		</p>
-		<p>
-			<b>
-				If you have Lenovo BIOS running (X60/X60S/X60T/T60), go to <a href="#flashrom_lenovobios">#flashrom_lenovobios</a> instead.
-			</b>
-		</p>
-		<p>
-			<b>
-				If you have Lenovo BIOS running (X200), go to <a href="x200_external.html">x200_external.html</a> instead.
-			</b>
-		</p>
-		<p>
-			<b>
-				If you have Apple EFI firmware running (macbook21), go to <a href="#flashrom_macbook21">#flashrom_macbook21</a> instead.
-			</b>
-		</p>
-		<p>
-			<b>
-				If you are flashing a Lenovo ThinkPad T60, be sure to read <a href="../hcl/index.html#supported_t60_list">../hcl/index.html#supported_t60_list</a>.
-			</b>
-		</p>
-		<p>
-			<b>
-				If you have an X200 with libreboot or coreboot already running, note that
-				the Gbe in the boot flash contains your MAC address. You will need to change the default
-				MAC address inside the ROM images before flashing a new libreboot image. See 
-				<a href="../hcl/x200_remove_me.html#ich9gen">ich9gen</a> for details.
-				
-				Another important note about the X200: even if you do already have libreboot or coreboot,
-				it is possible for the user to write-protect regions in the flash chip, by modifying
-				the flash descriptor. If you have locked regions, you will need an external flasher
-				(see <a href="x200_external.html">x200_external.html</a>) to re-flash those regions. By default,
-				the X200 ROM images in libreboot contain a descriptor+gbe with all regions unlocked.
-			</b>
-		</p>
-		<p>
-			<b>
-				If you are flashing an Apple MacBook2,1, be sure to read the information in <a href="../hcl/index.html#macbook21">../hcl/index.html#macbook21</a>.
-			</b>
-		</p>
-		<div class="important">
 			<p>
-				<b>If you are using libreboot_src or git, then make sure that you built the sources first (see <a href="../git/index.html#build">../git/index.html#build</a>).</b>
+				<b>
+					If you have Lenovo BIOS running (X200), go to <a href="x200_external.html">x200_external.html</a> instead.
+				</b>
 			</p>
-		</div>
-		<p>
-			Look at <a href="#rom">#rom</a> to see which ROM is suitable for your machine. Alternative you may be using your own
-			custom ROM. Adapt.
-		</p>
-		<p>
-			Flash the ROM:<br/>
-			<b>$ sudo ./flash bin/<a href="#rom">YOURBOARD/YOURROM</a></b>
-		</p>
-		<p>
-			If you are flashing a ThinkPad X60 that is currently running libreboot 5th release or lower 
-			(anything on or before June 22nd 2014), then use this to upgrade:<br/>
-			<b>$ sudo ./x60flashfrom5 bin/<a href="#rom">YOURBOARD/YOURROM</a></b>
-		</p>
-
-		<div class="important">
-
 			<p>
-				You should see <b>&quot;Verifying flash... VERIFIED.&quot;</b> written at the end of the flashrom output. <b>SHUT DOWN</b>
-				after you see this, and then boot up again after a few seconds.
+				<b>
+					If you have Apple EFI firmware running (macbook21), go to <a href="#flashrom_macbook21">#flashrom_macbook21</a> instead.
+				</b>
+			</p>
+			<p>
+				<b>
+					If you are flashing a Lenovo ThinkPad T60, be sure to read <a href="../hcl/index.html#supported_t60_list">../hcl/index.html#supported_t60_list</a>.
+				</b>
+			</p>
+			<p>
+				<b>
+					If you have an X200 with libreboot or coreboot already running, note that
+					the Gbe in the boot flash contains your MAC address. You will need to change the default
+					MAC address inside the ROM images before flashing a new libreboot image. See 
+					<a href="../hcl/x200_remove_me.html#ich9gen">ich9gen</a> for details.
+					
+					Another important note about the X200: even if you do already have libreboot or coreboot,
+					it is possible for the user to write-protect regions in the flash chip, by modifying
+					the flash descriptor. If you have locked regions, you will need an external flasher
+					(see <a href="x200_external.html">x200_external.html</a>) to re-flash those regions. By default,
+					the X200 ROM images in libreboot contain a descriptor+gbe with all regions unlocked.
+				</b>
 			</p>
-
 			<p>
 				<b>
-					If you boot and you see nothing, try turning up the backlight (Fn+Home for X60/X60S/X60T/T60/X200, F2 for macbook21). 
+					If you are flashing an Apple MacBook2,1, be sure to read the information in <a href="../hcl/index.html#macbook21">../hcl/index.html#macbook21</a>.
 				</b>
 			</p>
+			<div class="important">
+				<p>
+					<b>If you are using libreboot_src or git, then make sure that you built the sources first (see <a href="../git/index.html#build">../git/index.html#build</a>).</b>
+				</p>
+			</div>
+			<p>
+				Look at <a href="#rom">#rom</a> to see which ROM is suitable for your machine. Alternative you may be using your own
+				custom ROM. Adapt.
+			</p>
+			<p>
+				Flash the ROM:<br/>
+				<b>$ sudo ./flash bin/<a href="#rom">YOURBOARD/YOURROM</a></b>
+			</p>
+			<p>
+				If you are flashing a ThinkPad X60 that is currently running libreboot 5th release or lower 
+				(anything on or before June 22nd 2014), then use this to upgrade:<br/>
+				<b>$ sudo ./x60flashfrom5 bin/<a href="#rom">YOURBOARD/YOURROM</a></b>
+			</p>
 
-		</div>
+			<div class="important">
 
-		<p>
-			Some thinkpads come with WWAN cards installed, along with sim cards. These use non-free firmware and should be removed. 
-			You might also want to remove bluetooth. See <a href="../security/x60_security.html">../security/x60_security.html</a> and
-			<a href="../security/t60_security.html">../security/t60_security.html</a>.
-		</p>
+				<p>
+					You should see <b>&quot;Verifying flash... VERIFIED.&quot;</b> written at the end of the flashrom output. <b>SHUT DOWN</b>
+					after you see this, and then boot up again after a few seconds.
+				</p>
 
-		<p><a href="#pagetop">Back to top of page</a></p>
+				<p>
+					<b>
+						If you boot and you see nothing, try turning up the backlight (Fn+Home for X60/X60S/X60T/T60/X200, F2 for macbook21). 
+					</b>
+				</p>
 
-<hr/>
+			</div>
 
-	<p>
-		Copyright &copy; 2014, 2015 Francis Rowe &lt;info@gluglug.org.uk&gt;<br/>
-		This document is released under the Creative Commons Attribution-ShareAlike 4.0 International Public License and all future versions.
-		A copy of the license can be found at <a href="../license.txt">../license.txt</a>.
-	</p>
+			<p>
+				Some thinkpads come with WWAN cards installed, along with sim cards. These use non-free firmware and should be removed. 
+				You might also want to remove bluetooth. See <a href="../security/x60_security.html">../security/x60_security.html</a> and
+				<a href="../security/t60_security.html">../security/t60_security.html</a>.
+			</p>
+
+			<p><a href="#pagetop">Back to top of page</a></p>
+			
+	</div>
 
-	<p>
-		This document is distributed in the hope that it will be useful,
-		but WITHOUT ANY WARRANTY; without even the implied warranty of
-		MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See <a href="../license.txt">../license.txt</a> for more information.
-	</p>
+	<div class="section">
+
+		<p>
+			Copyright &copy; 2014, 2015 Francis Rowe &lt;info@gluglug.org.uk&gt;<br/>
+			This document is released under the Creative Commons Attribution-ShareAlike 4.0 International Public License and all future versions.
+			A copy of the license can be found at <a href="../license.txt">../license.txt</a>.
+		</p>
+
+		<p>
+			This document is distributed in the hope that it will be useful,
+			but WITHOUT ANY WARRANTY; without even the implied warranty of
+			MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See <a href="../license.txt">../license.txt</a> for more information.
+		</p>
+		
+	</div>
 
 </body>
 </html>
diff --git a/docs/install/t60_unbrick.html b/docs/install/t60_unbrick.html
index ba010d3..a36f961 100644
--- a/docs/install/t60_unbrick.html
+++ b/docs/install/t60_unbrick.html
@@ -13,161 +13,166 @@
 
 <body>
 
-	<header>
+	<div class="section">
 		<h1>Unbricking the ThinkPad T60</h1>
-		<aside>This guide will show you how to recover from a bad flash that prevents your ThinkPad T60 from booting.</aside>
-	</header>
-
-	<p>Or go <a href="index.html">back to main index</a></p>
-
-	<h2>Table of Contents</h2>
-		<ul>
-			<li>
-				Types of brick:
-				<ul>
-					<li><a href="#bucts_brick">Brick type 1: bucts not reset</a></li>
-					<li><a href="#recovery">Brick type 2: bad rom (or user error), machine won't boot</a></li>
-				</ul>
-			</li>
-		</ul>
-
-	<h1 id="bucts_brick">Brick type 1: bucts not reset.</h1>
-		<p>
-			You still have Lenovo BIOS, or you had libreboot running and you flashed another ROM; and you had bucts 1 set and
-			the ROM wasn't dd'd.* or if Lenovo BIOS was present and libreboot wasn't flashed.<br/><br/>
-
-			In this case, unbricking is easy: reset BUC.TS to 0 by removing that yellow cmos coin (it's a battery) and putting it back after a minute or two:<br/>
-			<img src="../images/t60_dev/0006.JPG" alt="" /><br/><br/>
-
-			*Those dd commands should be applied to all newly compiled T60 ROM images (the ROM images in libreboot binary archives already have this applied!):<br/>
-			dd if=coreboot.rom of=top64k.bin bs=1 skip=$[$(stat -c %s coreboot.rom) - 0x10000] count=64k<br/>
-			dd if=coreboot.rom bs=1 skip=$[$(stat -c %s coreboot.rom) - 0x20000] count=64k | hexdump<br/>
-			dd if=top64k.bin of=coreboot.rom bs=1 seek=$[$(stat -c %s coreboot.rom) - 0x20000] count=64k conv=notrunc<br/>
-			(doing this makes the ROM suitable for use when flashing a machine that still has Lenovo BIOS running,
-			using those instructions: <a href="http://www.coreboot.org/Board:lenovo/x60/Installation">http://www.coreboot.org/Board:lenovo/x60/Installation</a>.
-			(it says x60, but instructions for t60 are identical)
-		</p>
-
-	<h1 id="recovery">bad rom (or user error), machine won't boot</h1>
-
-		<p>
-			In this scenario, you compiled a ROM that had an incorrect configuration, or there is an actual bug preventing your machine from
-			booting. Or, maybe, you set BUC.TS to 0 and shut down after first flash while Lenovo BIOS was running. In any case, your machine is bricked and will not boot at all.
-		</p>
-		<p>
-			&quot;Unbricking&quot; means flashing a known-good (working) ROM. The problem: you can't boot the machine, making this difficult. In this situation, external hardware (see hardware requirements above) is needed which can flash the SPI chip (where libreboot resides).
-		</p>
-
-		<p>
-			Remove those screws and remove the HDD:<br/>
-			<img src="../images/t60_dev/0001.JPG" alt="" /> <img src="../images/t60_dev/0002.JPG" alt="" />
-		</p>
-
-		<p>
-			Lift off the palm rest:<br/>
-			<img src="../images/t60_dev/0003.JPG" alt="" />
-		</p>
-
-		<p>
-			Lift up the keyboard, pull it back a bit, flip it over like that and then disconnect it from the board:<br/>
-			<img src="../images/t60_dev/0004.JPG" alt="" /> <img src="../images/t60_dev/0005.JPG" alt="" /> <img src="../images/t60_dev/0006.JPG" alt="" />
-		</p>
-
-		<p>
-			Gently wedge both sides loose:<br/>
-			<img src="../images/t60_dev/0007.JPG" alt="" /> <img src="../images/t60_dev/0008.JPG" alt="" />
-		</p>
-
-		<p>
-			Remove that cable from the position:<br/>
-			<img src="../images/t60_dev/0009.JPG" alt="" /> <img src="../images/t60_dev/0010.JPG" alt="" />
-		</p>
-
-		<p>
-			Now remove that bezel. Remove wifi, nvram battery and speaker connector (also remove 56k modem, on the left of wifi):<br/>
-			<img src="../images/t60_dev/0011.JPG" alt="" />
-		</p>
-
-		<p>
-			Remove those screws:<br/>
-			<img src="../images/t60_dev/0012.JPG" alt="" />
-		</p>
-
-		<p>
-			Disconnect the power jack:<br/>
-			<img src="../images/t60_dev/0013.JPG" alt="" />
-		</p>
-
-		<p>
-			Remove nvram battery:<br/>
-			<img src="../images/t60_dev/0014.JPG" alt="" />
-		</p>
-
-		<p>
-			Disconnect cable (for 56k modem) and disconnect the other cable:<br/>
-			<img src="../images/t60_dev/0015.JPG" alt="" /> <img src="../images/t60_dev/0016.JPG" alt="" />
-		</p>
-
-		<p>
-			Disconnect speaker cable:<br/>
-			<img src="../images/t60_dev/0017.JPG" alt="" />
-		</p>
-
-		<p>
-			Disconnect the other end of the 56k modem cable:<br/>
-			<img src="../images/t60_dev/0018.JPG" alt="" />
-		</p>
-
-		<p>
-			Make sure you removed it:<br/>
-			<img src="../images/t60_dev/0019.JPG" alt="" />
-		</p>
-
-		<p>
-			Unscrew those:<br/>
-			<img src="../images/t60_dev/0020.JPG" alt="" />
-		</p>
-
-		<p>
-			Make sure you removed those:<br/>
-			<img src="../images/t60_dev/0021.JPG" alt="" />
-		</p>
-
-		<p>
-			Disconnect LCD cable from board:<br/>
-			<img src="../images/t60_dev/0022.JPG" alt="" />
-		</p>
-
-		<p> 
-			Remove those screws then remove the LCD assembly:<br/>
-			<img src="../images/t60_dev/0023.JPG" alt="" /> <img src="../images/t60_dev/0024.JPG" alt="" /> <img src="../images/t60_dev/0025.JPG" alt="" />
-		</p>
-
-		<p>
-			Once again, make sure you removed those:<br/>
-			<img src="../images/t60_dev/0026.JPG" alt="" />
-		</p>
-
-		<p>
-			Remove the shielding containing the motherboard, then flip it over. Remove these screws, placing them on a steady
-			surface in the same layout as they were in before you removed them. Also, you should mark each screw hole after removing the
-			screw (a permanent marker pen will do), this is so that you have a point of reference when re-assembling the machine:<br/>
-			<img src="../images/t60_dev/0027.JPG" alt="" /> <img src="../images/t60_dev/0028.JPG" alt="" /> <img src="../images/t60_dev/0029.JPG" alt="" />
-			<img src="../images/t60_dev/0031.JPG" alt="" /> <img src="../images/t60_dev/0032.JPG" alt="" /> <img src="../images/t60_dev/0033.JPG" alt="" />
-		</p>
-		
-		<p>
-			Now wire up the BBB and the Pomona with your PSU.<br/>
-			Refer to <a href="bbb_setup.html">bbb_setup.html</a> for how to setup
-			the BBB for flashing.<br/>
-			<b>Note, the guide mentions a 3.3v DC PSU but you don't need this on the T60:
-			if you don't have or don't want to use an external PSU, then make
-			sure not to connect the red/black 3.3v leads mentioned in the guide;
-			instead, connect the AC adapter (the one that normally charges your
-			battery) so that the board has power (but don't boot it up)</b><br/>
-			<img src="../images/t60_dev/0030.JPG" alt="" /><br/>
-			Correlate the following with the BBB guide linked above:
-		</p>
+			<p>This guide will show you how to recover from a bad flash that prevents your ThinkPad T60 from booting.</p>
+			<p><a href="index.html">Back to previous index</a></p>
+	</div>
+
+	<div class="section">
+		<h2>Table of Contents</h2>
+			<ul>
+				<li>
+					Types of brick:
+					<ul>
+						<li><a href="#bucts_brick">Brick type 1: bucts not reset</a></li>
+						<li><a href="#recovery">Brick type 2: bad rom (or user error), machine won't boot</a></li>
+					</ul>
+				</li>
+			</ul>
+	</div>
+
+	<div class="section">
+		<h1 id="bucts_brick">Brick type 1: bucts not reset.</h1>
+			<p>
+				You still have Lenovo BIOS, or you had libreboot running and you flashed another ROM; and you had bucts 1 set and
+				the ROM wasn't dd'd.* or if Lenovo BIOS was present and libreboot wasn't flashed.<br/><br/>
+
+				In this case, unbricking is easy: reset BUC.TS to 0 by removing that yellow cmos coin (it's a battery) and putting it back after a minute or two:<br/>
+				<img src="../images/t60_dev/0006.JPG" alt="" /><br/><br/>
+
+				*Those dd commands should be applied to all newly compiled T60 ROM images (the ROM images in libreboot binary archives already have this applied!):<br/>
+				dd if=coreboot.rom of=top64k.bin bs=1 skip=$[$(stat -c %s coreboot.rom) - 0x10000] count=64k<br/>
+				dd if=coreboot.rom bs=1 skip=$[$(stat -c %s coreboot.rom) - 0x20000] count=64k | hexdump<br/>
+				dd if=top64k.bin of=coreboot.rom bs=1 seek=$[$(stat -c %s coreboot.rom) - 0x20000] count=64k conv=notrunc<br/>
+				(doing this makes the ROM suitable for use when flashing a machine that still has Lenovo BIOS running,
+				using those instructions: <a href="http://www.coreboot.org/Board:lenovo/x60/Installation">http://www.coreboot.org/Board:lenovo/x60/Installation</a>.
+				(it says x60, but instructions for t60 are identical)
+			</p>
+	</div>
+	
+	<div class="section">
+
+		<h1 id="recovery">bad rom (or user error), machine won't boot</h1>
+
+			<p>
+				In this scenario, you compiled a ROM that had an incorrect configuration, or there is an actual bug preventing your machine from
+				booting. Or, maybe, you set BUC.TS to 0 and shut down after first flash while Lenovo BIOS was running. In any case, your machine is bricked and will not boot at all.
+			</p>
+			<p>
+				&quot;Unbricking&quot; means flashing a known-good (working) ROM. The problem: you can't boot the machine, making this difficult. In this situation, external hardware (see hardware requirements above) is needed which can flash the SPI chip (where libreboot resides).
+			</p>
+
+			<p>
+				Remove those screws and remove the HDD:<br/>
+				<img src="../images/t60_dev/0001.JPG" alt="" /> <img src="../images/t60_dev/0002.JPG" alt="" />
+			</p>
+
+			<p>
+				Lift off the palm rest:<br/>
+				<img src="../images/t60_dev/0003.JPG" alt="" />
+			</p>
+
+			<p>
+				Lift up the keyboard, pull it back a bit, flip it over like that and then disconnect it from the board:<br/>
+				<img src="../images/t60_dev/0004.JPG" alt="" /> <img src="../images/t60_dev/0005.JPG" alt="" /> <img src="../images/t60_dev/0006.JPG" alt="" />
+			</p>
+
+			<p>
+				Gently wedge both sides loose:<br/>
+				<img src="../images/t60_dev/0007.JPG" alt="" /> <img src="../images/t60_dev/0008.JPG" alt="" />
+			</p>
+
+			<p>
+				Remove that cable from the position:<br/>
+				<img src="../images/t60_dev/0009.JPG" alt="" /> <img src="../images/t60_dev/0010.JPG" alt="" />
+			</p>
+
+			<p>
+				Now remove that bezel. Remove wifi, nvram battery and speaker connector (also remove 56k modem, on the left of wifi):<br/>
+				<img src="../images/t60_dev/0011.JPG" alt="" />
+			</p>
+
+			<p>
+				Remove those screws:<br/>
+				<img src="../images/t60_dev/0012.JPG" alt="" />
+			</p>
+
+			<p>
+				Disconnect the power jack:<br/>
+				<img src="../images/t60_dev/0013.JPG" alt="" />
+			</p>
+
+			<p>
+				Remove nvram battery:<br/>
+				<img src="../images/t60_dev/0014.JPG" alt="" />
+			</p>
+
+			<p>
+				Disconnect cable (for 56k modem) and disconnect the other cable:<br/>
+				<img src="../images/t60_dev/0015.JPG" alt="" /> <img src="../images/t60_dev/0016.JPG" alt="" />
+			</p>
+
+			<p>
+				Disconnect speaker cable:<br/>
+				<img src="../images/t60_dev/0017.JPG" alt="" />
+			</p>
+
+			<p>
+				Disconnect the other end of the 56k modem cable:<br/>
+				<img src="../images/t60_dev/0018.JPG" alt="" />
+			</p>
+
+			<p>
+				Make sure you removed it:<br/>
+				<img src="../images/t60_dev/0019.JPG" alt="" />
+			</p>
+
+			<p>
+				Unscrew those:<br/>
+				<img src="../images/t60_dev/0020.JPG" alt="" />
+			</p>
+
+			<p>
+				Make sure you removed those:<br/>
+				<img src="../images/t60_dev/0021.JPG" alt="" />
+			</p>
+
+			<p>
+				Disconnect LCD cable from board:<br/>
+				<img src="../images/t60_dev/0022.JPG" alt="" />
+			</p>
+
+			<p> 
+				Remove those screws then remove the LCD assembly:<br/>
+				<img src="../images/t60_dev/0023.JPG" alt="" /> <img src="../images/t60_dev/0024.JPG" alt="" /> <img src="../images/t60_dev/0025.JPG" alt="" />
+			</p>
+
+			<p>
+				Once again, make sure you removed those:<br/>
+				<img src="../images/t60_dev/0026.JPG" alt="" />
+			</p>
+
+			<p>
+				Remove the shielding containing the motherboard, then flip it over. Remove these screws, placing them on a steady
+				surface in the same layout as they were in before you removed them. Also, you should mark each screw hole after removing the
+				screw (a permanent marker pen will do), this is so that you have a point of reference when re-assembling the machine:<br/>
+				<img src="../images/t60_dev/0027.JPG" alt="" /> <img src="../images/t60_dev/0028.JPG" alt="" /> <img src="../images/t60_dev/0029.JPG" alt="" />
+				<img src="../images/t60_dev/0031.JPG" alt="" /> <img src="../images/t60_dev/0032.JPG" alt="" /> <img src="../images/t60_dev/0033.JPG" alt="" />
+			</p>
+			
+			<p>
+				Now wire up the BBB and the Pomona with your PSU.<br/>
+				Refer to <a href="bbb_setup.html">bbb_setup.html</a> for how to setup
+				the BBB for flashing.<br/>
+				<b>Note, the guide mentions a 3.3v DC PSU but you don't need this on the T60:
+				if you don't have or don't want to use an external PSU, then make
+				sure not to connect the red/black 3.3v leads mentioned in the guide;
+				instead, connect the AC adapter (the one that normally charges your
+				battery) so that the board has power (but don't boot it up)</b><br/>
+				<img src="../images/t60_dev/0030.JPG" alt="" /><br/>
+				Correlate the following with the BBB guide linked above:
+			</p>
 <pre>
 POMONA 5250:
 ===  DVD drive ====
@@ -179,98 +184,102 @@ POMONA 5250:
 <i>This is how you will connect. Numbers refer to pin numbers on the BBB, on the plugs near the DC jack.</i>
 </pre>
 
-		<p>
-			Connect the pomona from the BBB to the flash chip. No pics unfortunately. (use the text diagram above).
-		</p>
-
-		<p>
-			SSH'd into the BBB:<br/>
-			# <b>./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w yourrom.rom</b>
-		</p>
-		<p>
-			It should be <b>Verifying flash... VERIFIED</b> at the end. If flashrom complains about multiple flash chip
-			definitions detected, then choose one of them following the instructions in the output.
-		</p>
-
-		<p>
-			Put those screws back:<br/>
-			<img src="../images/t60_dev/0047.JPG" alt="" />
-		</p>
-
-		<p>
-			Put it back into lower chassis:<br/>
-			<img src="../images/t60_dev/0048.JPG" alt="" />
-		</p>
-
-		<p>
-			Attach LCD and insert screws (also, attach the lcd cable to the board):<br/>
-			<img src="../images/t60_dev/0049.JPG" alt="" />
-		</p>
-
-		<p>
-			Insert those screws:<br/>
-			<img src="../images/t60_dev/0050.JPG" alt="" />
-		</p>
-
-		<p>
-			On the CPU (and there is another chip south-east to it, sorry forgot to take pic)
-			clean off the old thermal paste (with the alcohol) and apply new (Artic Silver 5 is good, others are good too)
-			you should also clean the heatsink the same way<br/>
-			<img src="../images/t60_dev/0051.JPG" alt="" />
-		</p>
-
-		<p>
-			Attach the heatsink and install the screws (also, make sure to install the AC jack as highlighted):<br/>
-			<img src="../images/t60_dev/0052.JPG" alt="" />
+			<p>
+				Connect the pomona from the BBB to the flash chip. No pics unfortunately. (use the text diagram above).
+			</p>
+
+			<p>
+				SSH'd into the BBB:<br/>
+				# <b>./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w yourrom.rom</b>
+			</p>
+			<p>
+				It should be <b>Verifying flash... VERIFIED</b> at the end. If flashrom complains about multiple flash chip
+				definitions detected, then choose one of them following the instructions in the output.
+			</p>
+
+			<p>
+				Put those screws back:<br/>
+				<img src="../images/t60_dev/0047.JPG" alt="" />
+			</p>
+
+			<p>
+				Put it back into lower chassis:<br/>
+				<img src="../images/t60_dev/0048.JPG" alt="" />
+			</p>
+
+			<p>
+				Attach LCD and insert screws (also, attach the lcd cable to the board):<br/>
+				<img src="../images/t60_dev/0049.JPG" alt="" />
+			</p>
+
+			<p>
+				Insert those screws:<br/>
+				<img src="../images/t60_dev/0050.JPG" alt="" />
+			</p>
+
+			<p>
+				On the CPU (and there is another chip south-east to it, sorry forgot to take pic)
+				clean off the old thermal paste (with the alcohol) and apply new (Artic Silver 5 is good, others are good too)
+				you should also clean the heatsink the same way<br/>
+				<img src="../images/t60_dev/0051.JPG" alt="" />
+			</p>
+
+			<p>
+				Attach the heatsink and install the screws (also, make sure to install the AC jack as highlighted):<br/>
+				<img src="../images/t60_dev/0052.JPG" alt="" />
+			</p>
+
+			<p>
+				Reinstall that upper bezel:<br/>
+				<img src="../images/t60_dev/0053.JPG" alt="" />
+			</p>
+
+			<p>
+				Do that:<br/>
+				<img src="../images/t60_dev/0054.JPG" alt="" /> <img src="../images/t60_dev/0055.JPG" alt="" />
+			</p>
+
+			<p>
+				Re-attach modem, wifi, (wwan?), and all necessary cables. Sorry, forgot to take pics. Look at previous removal steps to see where they go back to.
+			</p>
+
+			<p>
+				Attach keyboard and install nvram battery:<br/>
+				<img src="../images/t60_dev/0056.JPG" alt="" /> <img src="../images/t60_dev/0057.JPG" alt="" />
+			</p>
+
+			<p>
+				Place keyboard and (sorry, forgot to take pics) reinstall the palmrest and insert screws on the underside:<br/>
+				<img src="../images/t60_dev/0058.JPG" alt="" />
+			</p>
+
+			<p>
+				It lives!<br/>
+				<img src="../images/t60_dev/0071.JPG" alt="" /> <img src="../images/t60_dev/0072.JPG" alt="" /> <img src="../images/t60_dev/0073.JPG" alt="" />
+			</p>
+
+			<p>
+				Always stress test ('stress -c 2' and xsensors. below 90C is ok) when replacing cpu paste/heatsink:<br/>
+				<img src="../images/t60_dev/0074.JPG" alt="" />
+			</p>
+			
+	</div>
+
+	<div class="section">
+
+		<p>
+			Copyright &copy; 2014, 2015 Francis Rowe &lt;info@gluglug.org.uk&gt;<br/>
+			This document is released under the Creative Commons Attribution-ShareAlike 4.0 International Public License and all future versions.
+			A copy of the license can be found at <a href="../license.txt">../license.txt</a>.
+		</p>
+
+		<p>
+			This document is distributed in the hope that it will be useful,
+			but WITHOUT ANY WARRANTY; without even the implied warranty of
+			MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See <a href="../license.txt">../license.txt</a> for more information.
 		</p>
-
-		<p>
-			Reinstall that upper bezel:<br/>
-			<img src="../images/t60_dev/0053.JPG" alt="" />
-		</p>
-
-		<p>
-			Do that:<br/>
-			<img src="../images/t60_dev/0054.JPG" alt="" /> <img src="../images/t60_dev/0055.JPG" alt="" />
-		</p>
-
-		<p>
-			Re-attach modem, wifi, (wwan?), and all necessary cables. Sorry, forgot to take pics. Look at previous removal steps to see where they go back to.
-		</p>
-
-		<p>
-			Attach keyboard and install nvram battery:<br/>
-			<img src="../images/t60_dev/0056.JPG" alt="" /> <img src="../images/t60_dev/0057.JPG" alt="" />
-		</p>
-
-		<p>
-			Place keyboard and (sorry, forgot to take pics) reinstall the palmrest and insert screws on the underside:<br/>
-			<img src="../images/t60_dev/0058.JPG" alt="" />
-		</p>
-
-		<p>
-			It lives!<br/>
-			<img src="../images/t60_dev/0071.JPG" alt="" /> <img src="../images/t60_dev/0072.JPG" alt="" /> <img src="../images/t60_dev/0073.JPG" alt="" />
-		</p>
-
-		<p>
-			Always stress test ('stress -c 2' and xsensors. below 90C is ok) when replacing cpu paste/heatsink:<br/>
-			<img src="../images/t60_dev/0074.JPG" alt="" />
-		</p>
-
-<hr/>
-
-	<p>
-		Copyright &copy; 2014 Francis Rowe &lt;info@gluglug.org.uk&gt;<br/>
-		This document is released under the Creative Commons Attribution-ShareAlike 4.0 International Public License and all future versions.
-		A copy of the license can be found at <a href="../license.txt">../license.txt</a>.
-	</p>
-
-	<p>
-		This document is distributed in the hope that it will be useful,
-		but WITHOUT ANY WARRANTY; without even the implied warranty of
-		MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See <a href="../license.txt">../license.txt</a> for more information.
-	</p>
+		
+	</div>
 
 </body>
 </html>
diff --git a/docs/install/x200_external.html b/docs/install/x200_external.html
index 84bf2ed..66f938f 100644
--- a/docs/install/x200_external.html
+++ b/docs/install/x200_external.html
@@ -13,62 +13,61 @@
 
 <body>
 
-	<header>
+	<div class="section">
 		<h1 id="pagetop">Flashing the X200 with a BeagleBone Black</h1>
-		<aside>Initial flashing instructions for X200.</aside>
-	</header>
-	
-	<p>
-		This guide is for those who want libreboot on their ThinkPad X200
-		while they still have the original Lenovo BIOS present. This guide
-		can also be followed (adapted) if you brick your X200, to know how
-		to recover.
-	</p>
-	
-	<p>
-		The X200S is also briefly covered (image showing soldering joints, wired up
-		to a BBB). Note, not all X200S or X200 Tablet configurations are supported yet 
-		(see <a href="../hcl/x200.html#x200s">../hcl/x200.html#x200s</a></b>
-	</p>
-	
-	<p>
-		Before following this section, please make sure to setup your libreboot ROM properly first. 
-		Although ROM images are provided pre-built in libreboot, there are some modifications that 
-		you need to make to the one you chose before flashing. (instructions referenced later in
-		this guide)
-	</p>
+			<p>Initial flashing instructions for X200.</p>
+			<p>
+				This guide is for those who want libreboot on their ThinkPad X200
+				while they still have the original Lenovo BIOS present. This guide
+				can also be followed (adapted) if you brick your X200, to know how
+				to recover.
+			</p>
+			<p>
+				The X200S is also briefly covered (image showing soldering joints, wired up
+				to a BBB). Note, not all X200S or X200 Tablet configurations are supported yet 
+				(see <a href="../hcl/x200.html#x200s">../hcl/x200.html#x200s</a></b>
+			</p>
+			<p>
+				Before following this section, please make sure to setup your libreboot ROM properly first. 
+				Although ROM images are provided pre-built in libreboot, there are some modifications that 
+				you need to make to the one you chose before flashing. (instructions referenced later in
+				this guide)
+			</p>
 
-	<p>Or go <a href="index.html">back to main index</a></p>
+			<p><a href="index.html">Back to main index</a></p>
+	</div>
 
-<hr/>
+	<div class="section">
 
-	<h1 id="flashchips">Flash chips</h1>
-	
-		<p>
-			There are two possible flash chip sizes for the X200: 4MiB
-			(32Mbit) or 8MiB (64Mbit). This can be identified by the type
-			of flash chip below the palmrest: 4MiB is SOIC-8 (8 pins), 8MiB
-			is SOIC-16 (16 pins). The X200S uses a WSON package and has the same
-			pinout as SOIC-8 (covered briefly later on in this guide) but
-			the chip is on the underside of the board (disassembly required).
-		</p>
-	
-		<p>
-			<a href="#pagetop">Back to top of page.</a>
-		</p>
+		<h1 id="flashchips">Flash chips</h1>
+		
+			<p>
+				There are two possible flash chip sizes for the X200: 4MiB
+				(32Mbit) or 8MiB (64Mbit). This can be identified by the type
+				of flash chip below the palmrest: 4MiB is SOIC-8 (8 pins), 8MiB
+				is SOIC-16 (16 pins). The X200S uses a WSON package and has the same
+				pinout as SOIC-8 (covered briefly later on in this guide) but
+				the chip is on the underside of the board (disassembly required).
+			</p>
 		
-<hr/>
+			<p>
+				<a href="#pagetop">Back to top of page.</a>
+			</p>
+			
+	</div>
+		
+	<div class="section">
 
-	<h1>Initial BBB setup</h1>
-	
-		<p>
-			Refer to <a href="bbb_setup.html">bbb_setup.html</a> for how to
-			setup the BBB for flashing.
-		</p>
+		<h1>Initial BBB setup</h1>
+		
+			<p>
+				Refer to <a href="bbb_setup.html">bbb_setup.html</a> for how to
+				setup the BBB for flashing.
+			</p>
 
-		<p>
-			The following shows how to connect clip to the BBB	(on the P9 header), for SOIC-16 (clip: Pomona 5252):
-		</p>
+			<p>
+				The following shows how to connect clip to the BBB	(on the P9 header), for SOIC-16 (clip: Pomona 5252):
+			</p>
 <pre>
 POMONA 5252 (correlate with the BBB guide)
 ===  front (display) on your X200 ====
@@ -83,9 +82,9 @@ POMONA 5252 (correlate with the BBB guide)
 ===  back (palmrest) on your X200 ===
 <i>This is how you will connect. Numbers refer to pin numbers on the BBB, on the plugs near the DC jack.</i>
 </pre>
-		<p>
-			The following shows how to connect clip to the BBB	(on the P9 header), for SOIC-8 (clip: Pomona 5250):
-		</p>
+			<p>
+				The following shows how to connect clip to the BBB	(on the P9 header), for SOIC-8 (clip: Pomona 5250):
+			</p>
 <pre>
 POMONA 5250 (correlate with the BBB guide)
 ===  front (display) on your X200 ====
@@ -96,34 +95,34 @@ POMONA 5250 (correlate with the BBB guide)
 ===  back (palmrest) on your X200 ===
 <i>This is how you will connect. Numbers refer to pin numbers on the BBB, on the plugs near the DC jack.</i>
 </pre>
-		<p>
-			<b>On the X200S the flash chip is underneath the board, in a WSON package. 
-			The pinout is very much the same as a SOIC-8, except you need to solder (there are no clips available). 
-			<a href="images/x200/wson_soldered.jpg">images/x200/wson_soldered.jpg</a> (image copyright (C) 2014 <a href="mailto:sgsit@libreboot.org">Steve Shenton</a> under CC-BY-SA 4.0
-			or higher, same license that this document uses) shows it wired (soldered) and
-			connected to a BBB.</b>
-		</p>
-
-		<h2>
-			Connect Pomona 5252/5250 to the X200 flash chip, and dump/flash
-		</h2>
-			<p>
-				<a href="images/x200/x200_pomona.jpg">images/x200/x200_pomona.jpg</a>
-				shows everything connected. In this picture, the X200 is being flashed
-				with the BBB.
-			</p>
 			<p>
-				Remove the battery from your X200, then remove all the screws on
-				the bottom (underside) of the machine. Then remove the keyboard and palmrest. 
-				The flash chip is below the palm rest. Lift back the tape that goes over it,
-				and then connect your 5252/5250 (make sure to get it the right way round). 
-				Then connect the 3.3v PSU wire (red one) and make sure that everything else is connected.
-			</p>
-			<p>
-				I did (SSH'd into the BBB):<br/>
-				# <b>./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512</b><br/>
-				In my case, the output was:
+				<b>On the X200S the flash chip is underneath the board, in a WSON package. 
+				The pinout is very much the same as a SOIC-8, except you need to solder (there are no clips available). 
+				<a href="images/x200/wson_soldered.jpg">images/x200/wson_soldered.jpg</a> (image copyright (C) 2014 <a href="mailto:sgsit@libreboot.org">Steve Shenton</a> under CC-BY-SA 4.0
+				or higher, same license that this document uses) shows it wired (soldered) and
+				connected to a BBB.</b>
 			</p>
+
+			<h2>
+				Connect Pomona 5252/5250 to the X200 flash chip, and dump/flash
+			</h2>
+				<p>
+					<a href="images/x200/x200_pomona.jpg">images/x200/x200_pomona.jpg</a>
+					shows everything connected. In this picture, the X200 is being flashed
+					with the BBB.
+				</p>
+				<p>
+					Remove the battery from your X200, then remove all the screws on
+					the bottom (underside) of the machine. Then remove the keyboard and palmrest. 
+					The flash chip is below the palm rest. Lift back the tape that goes over it,
+					and then connect your 5252/5250 (make sure to get it the right way round). 
+					Then connect the 3.3v PSU wire (red one) and make sure that everything else is connected.
+				</p>
+				<p>
+					I did (SSH'd into the BBB):<br/>
+					# <b>./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512</b><br/>
+					In my case, the output was:
+				</p>
 <pre>
 flashrom v0.9.7-r1854 on Linux 3.8.13-bone47 (armv7l)
 flashrom is free software, get the source code at http://www.flashrom.org
@@ -134,48 +133,48 @@ Found Macronix flash chip &quot;MX25L6445E/MX25L6473E&quot; (8192 kB, SPI) on li
 Multiple flash chip definitions match the detected chip(s): &quot;MX25L6405(D)&quot;, &quot;MX25L6406E/MX25L6436E&quot;, &quot;MX25L6445E/MX25L6473E&quot;
 Please specify which chip definition to use with the -c &lt;chipname&gt; option.
 </pre>
-			<p>
-				This is just to test that it's working. In my case, I had to define which chip to use, like so (in your case
-				it may be different, depending on what flash chip you have):<br/>
-				# <b>./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -c &quot;MX25L6405(D)&quot;</b>
-			</p>
-			<p>
-				At this point, you need to create a copy of the original lenovo firmware that is currently flashed. 
-				This is so that you can extract the gbe (gigabit ethernet) and flash descriptor regions for use in libreboot. <b>These
-				are not blobs, they only contain non-functional data (configuration details, fully readable) which is fully documented in public datasheets.</b>
-				The descriptor will need to be modified
-				to disable the ME (also disable AMT) so that you can flash a ROM that excludes it. 
-			</p>
-			<p>
-				How to backup factory.rom (change the -c option as neeed, for your flash chip):<br/>
-				# <b>./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -c &quot;MX25L6405(D)&quot; -r factory.rom</b><br/>
-				# <b>./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -c &quot;MX25L6405(D)&quot; -r factory1.rom</b><br/>
-				# <b>./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -c &quot;MX25L6405(D)&quot; -r factory2.rom</b><br/>
-				Now compare the 3 images:<br/>
-				# <b>sha512sum factory*.rom</b><br/>
-				If the hashes match, then just copy one of them (the factory.rom) to a safe place (on a drive connected to another machine, not
-				the BBB). You will need it later for part of the deblobbing.
-			</p>
-			<p>
-				Information about the descriptor, gbe regions and how the ME was removed can be found in the notes linked at
-				<a href="../hcl/x200_remove_me.html">../hcl/x200_remove_me.html</a>. Libreboot ROM images now include
-				the 12KiB descriptor+gbe by default, generated using ich9gen;
-				<b>however, do note that the MAC address in the Gbe region is generic. Follow the instructions at 
-				<a href="../hcl/x200_remove_me.html#ich9gen">../hcl/x200_remove_me.html#ich9gen</a> and do what it says to change the MAC address
-				inside your X200 ROM image, before flashing it.</b>
-			</p>
-			<p>
-				Assuming that your libreboot ROM image is properly setup (modified descriptor plus gbe region included in the ROM),
-				then you can flash (assuming that the filename is <b>libreboot.rom</b>) for example I had to do:<br/>
-				# <b>./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -c &quot;MX25L6405(D)&quot; -w libreboot.rom</b>
-			</p>
-			<p>
-				You might see errors, but if it says <b>Verifying flash... VERIFIED</b> at the end, then it's flashed and should boot.
-				Test it! (boot your X200)
-			</p>
-			<p>
-				My output when running the command above:
-			</p>
+				<p>
+					This is just to test that it's working. In my case, I had to define which chip to use, like so (in your case
+					it may be different, depending on what flash chip you have):<br/>
+					# <b>./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -c &quot;MX25L6405(D)&quot;</b>
+				</p>
+				<p>
+					At this point, you need to create a copy of the original lenovo firmware that is currently flashed. 
+					This is so that you can extract the gbe (gigabit ethernet) and flash descriptor regions for use in libreboot. <b>These
+					are not blobs, they only contain non-functional data (configuration details, fully readable) which is fully documented in public datasheets.</b>
+					The descriptor will need to be modified
+					to disable the ME (also disable AMT) so that you can flash a ROM that excludes it. 
+				</p>
+				<p>
+					How to backup factory.rom (change the -c option as neeed, for your flash chip):<br/>
+					# <b>./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -c &quot;MX25L6405(D)&quot; -r factory.rom</b><br/>
+					# <b>./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -c &quot;MX25L6405(D)&quot; -r factory1.rom</b><br/>
+					# <b>./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -c &quot;MX25L6405(D)&quot; -r factory2.rom</b><br/>
+					Now compare the 3 images:<br/>
+					# <b>sha512sum factory*.rom</b><br/>
+					If the hashes match, then just copy one of them (the factory.rom) to a safe place (on a drive connected to another machine, not
+					the BBB). You will need it later for part of the deblobbing.
+				</p>
+				<p>
+					Information about the descriptor, gbe regions and how the ME was removed can be found in the notes linked at
+					<a href="../hcl/x200_remove_me.html">../hcl/x200_remove_me.html</a>. Libreboot ROM images now include
+					the 12KiB descriptor+gbe by default, generated using ich9gen;
+					<b>however, do note that the MAC address in the Gbe region is generic. Follow the instructions at 
+					<a href="../hcl/x200_remove_me.html#ich9gen">../hcl/x200_remove_me.html#ich9gen</a> and do what it says to change the MAC address
+					inside your X200 ROM image, before flashing it.</b>
+				</p>
+				<p>
+					Assuming that your libreboot ROM image is properly setup (modified descriptor plus gbe region included in the ROM),
+					then you can flash (assuming that the filename is <b>libreboot.rom</b>) for example I had to do:<br/>
+					# <b>./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -c &quot;MX25L6405(D)&quot; -w libreboot.rom</b>
+				</p>
+				<p>
+					You might see errors, but if it says <b>Verifying flash... VERIFIED</b> at the end, then it's flashed and should boot.
+					Test it! (boot your X200)
+				</p>
+				<p>
+					My output when running the command above:
+				</p>
 <pre>
 flashrom v0.9.7-r1854 on Linux 3.8.13-bone47 (armv7l)
 flashrom is free software, get the source code at http://www.flashrom.org
@@ -188,24 +187,28 @@ Reading current flash chip contents... done. Looking for another erase function.
 Erase/write done.
 Verifying flash... VERIFIED.
 </pre>
+				
+			<p>
+				<a href="#pagetop">Back to top of page.</a>
+			</p>
 			
-		<p>
-			<a href="#pagetop">Back to top of page.</a>
-		</p>
+	</div>
 
-<hr/>
+	<div class="section">
 
-	<p>
-		Copyright &copy; 2014, 2015 Francis Rowe &lt;info@gluglug.org.uk&gt;<br/>
-		This document is released under the Creative Commons Attribution-ShareAlike 4.0 International Public License and all future versions.
-		A copy of the license can be found at <a href="../license.txt">../license.txt</a>.
-	</p>
+		<p>
+			Copyright &copy; 2014, 2015 Francis Rowe &lt;info@gluglug.org.uk&gt;<br/>
+			This document is released under the Creative Commons Attribution-ShareAlike 4.0 International Public License and all future versions.
+			A copy of the license can be found at <a href="../license.txt">../license.txt</a>.
+		</p>
 
-	<p>
-		This document is distributed in the hope that it will be useful,
-		but WITHOUT ANY WARRANTY; without even the implied warranty of
-		MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See <a href="../license.txt">../license.txt</a> for more information.
-	</p>
+		<p>
+			This document is distributed in the hope that it will be useful,
+			but WITHOUT ANY WARRANTY; without even the implied warranty of
+			MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See <a href="../license.txt">../license.txt</a> for more information.
+		</p>
+		
+	</div>
 
 </body>
 </html>
diff --git a/docs/install/x60_unbrick.html b/docs/install/x60_unbrick.html
index 89edfb4..1b5056d 100644
--- a/docs/install/x60_unbrick.html
+++ b/docs/install/x60_unbrick.html
@@ -13,123 +13,128 @@
 
 <body>
 
-	<header>
+	<div class="section">
 		<h1>Unbricking the ThinkPad X60</h1>
-		<aside>This guide will show you how to recover from a bad flash that prevents your ThinkPad X60 from booting.</aside>
-	</header>
+			<p>This guide will show you how to recover from a bad flash that prevents your ThinkPad X60 from booting.</p>
+			<p><a href="index.html">Back to previous index</a></p>
+	</div>
 
-	<p>Or go <a href="index.html">back to main index</a></p>
+	<div class="section">
+		<h1>Table of Contents</h1>
+			<ul>
+				<li>
+					Types of brick:
+					<ul>
+						<li><a href="#bucts_brick">Brick type 1: bucts not reset</a></li>
+						<li><a href="#recovery">Brick type 2: bad rom (or user error), machine won't boot</a></li>
+					</ul>
+				</li>
+			</ul>
+	</div>
 
-	<h2>Table of Contents</h2>
-		<ul>
-			<li>
-				Types of brick:
-				<ul>
-					<li><a href="#bucts_brick">Brick type 1: bucts not reset</a></li>
-					<li><a href="#recovery">Brick type 2: bad rom (or user error), machine won't boot</a></li>
-				</ul>
-			</li>
-		</ul>
+	<div class="section">
+		<h1 id="bucts_brick">Brick type 1: bucts not reset.</h1>
+			<p>
+				You still have Lenovo BIOS, or you had libreboot running and you flashed another ROM; and you had bucts 1 set and
+				the ROM wasn't dd'd.* or if Lenovo BIOS was present and libreboot wasn't flashed.<br/><br/>
 
-	<h1 id="bucts_brick">Brick type 1: bucts not reset.</h1>
-		<p>
-			You still have Lenovo BIOS, or you had libreboot running and you flashed another ROM; and you had bucts 1 set and
-			the ROM wasn't dd'd.* or if Lenovo BIOS was present and libreboot wasn't flashed.<br/><br/>
-
-			In this case, unbricking is easy: reset BUC.TS to 0 by removing that yellow cmos coin (it's a battery) and putting it back after a minute or two:<br/>
-			<img src="../images/x60_unbrick/0004.jpg" alt="" /><br/><br/>
+				In this case, unbricking is easy: reset BUC.TS to 0 by removing that yellow cmos coin (it's a battery) and putting it back after a minute or two:<br/>
+				<img src="../images/x60_unbrick/0004.jpg" alt="" /><br/><br/>
 
-			*Those dd commands should be applied to all newly compiled X60 ROM images (the ROM images in libreboot binary archives already have this applied!):<br/>
-			dd if=coreboot.rom of=top64k.bin bs=1 skip=$[$(stat -c %s coreboot.rom) - 0x10000] count=64k<br/>
-			dd if=coreboot.rom bs=1 skip=$[$(stat -c %s coreboot.rom) - 0x20000] count=64k | hexdump<br/>
-			dd if=top64k.bin of=coreboot.rom bs=1 seek=$[$(stat -c %s coreboot.rom) - 0x20000] count=64k conv=notrunc<br/>
-			(doing this makes the ROM suitable for use when flashing a machine that still has Lenovo BIOS running,
-			using those instructions: <a href="http://www.coreboot.org/Board:lenovo/x60/Installation">http://www.coreboot.org/Board:lenovo/x60/Installation</a>.
-		</p>
+				*Those dd commands should be applied to all newly compiled X60 ROM images (the ROM images in libreboot binary archives already have this applied!):<br/>
+				dd if=coreboot.rom of=top64k.bin bs=1 skip=$[$(stat -c %s coreboot.rom) - 0x10000] count=64k<br/>
+				dd if=coreboot.rom bs=1 skip=$[$(stat -c %s coreboot.rom) - 0x20000] count=64k | hexdump<br/>
+				dd if=top64k.bin of=coreboot.rom bs=1 seek=$[$(stat -c %s coreboot.rom) - 0x20000] count=64k conv=notrunc<br/>
+				(doing this makes the ROM suitable for use when flashing a machine that still has Lenovo BIOS running,
+				using those instructions: <a href="http://www.coreboot.org/Board:lenovo/x60/Installation">http://www.coreboot.org/Board:lenovo/x60/Installation</a>.
+			</p>
+	</div>
+	
+	<div class="section">
 
-	<h1 id="recovery">bad rom (or user error), machine won't boot</h1>
-		<p>
-			In this scenario, you compiled a ROM that had an incorrect configuration, or there is an actual bug preventing your machine from
-			booting. Or, maybe, you set BUC.TS to 0 and shut down after first flash while Lenovo BIOS was running. In any case, your machine is bricked and will not boot at all.
-		</p>
-		<p>
-			&quot;Unbricking&quot; means flashing a known-good (working) ROM. The problem: you can't boot the machine, making this difficult. In this situation, external hardware (see hardware requirements above) is needed which can flash the SPI chip (where libreboot resides).
-		</p>
-		<p>
-			Remove those screws:<br/>
-			<img src="../images/x60_unbrick/0000.jpg" alt="" />
-		</p>
-		<p>
-			Push the keyboard forward (carefully):<br/>
-			<img src="../images/x60_unbrick/0001.jpg" alt="" />
-		</p>
-		<p>
-			Lift the keyboard up and disconnect it from the board:<br/>
-			<img src="../images/x60_unbrick/0002.jpg" alt="" />
-		</p>
-		<p>
-			Grab the right-hand side of the chassis and force it off (gently) and pry up the rest of the chassis:<br/>
-			<img src="../images/x60_unbrick/0003.jpg" alt="" />
-		</p>
-		<p>
-			You should now have this:<br/>
-			<img src="../images/x60_unbrick/0004.jpg" alt="" />
-		</p>
-		<p>
-			Disconnect the wifi antenna cables, the modem cable and the speaker:<br/>
-			<img src="../images/x60_unbrick/0005.jpg" alt="" />
-		</p>
-		<p>
-			Unroute the cables along their path, carefully lifting the tape that holds them in place. Then, disconnect the modem
-			cable (other end) and power connection and unroute all the cables so that they dangle by the monitor hinge on the right-hand
-			side:<br/>
-			<img src="../images/x60_unbrick/0006.jpg" alt="" />
-		</p>
-		<p>
-			Disconnect the monitor from the motherboard, and unroute the grey antenna cable, carefully lifting the tape
-			that holds it into place:<br/>
-			<img src="../images/x60_unbrick/0008.jpg" alt="" />
-		</p>
-		<p>
-			Carefully lift the remaining tape and unroute the left antenna cable so that it is loose:<br/>
-			<img src="../images/x60_unbrick/0009.jpg" alt="" />
-		</p>
-		<p>
-			Remove the screw that is highlighted (do NOT remove the other one; it holds part of the heatsink (other side) into place):<br/>
-			<img src="../images/x60_unbrick/0011.jpg" alt="" />
-		</p>
-		<p>
-			Remove those screws:<br/>
-			<img src="../images/x60_unbrick/0012.jpg" alt="" />
-		</p>
-		<p>
-			Carefully remove the plate, like so:<br/>
-			<img src="../images/x60_unbrick/0013.jpg" alt="" />
-		</p>
-		<p>
-			Remove the SATA connector:<br/>
-			<img src="../images/x60_unbrick/0014.jpg" alt="" />
-		</p>
-		<p>
-			Now remove the motherboard (gently) and cast the lcd/chassis aside:<br/>
-			<img src="../images/x60_unbrick/0015.jpg" alt="" />
-		</p>
-		<p>
-			Lift back that tape and hold it with something. Highlighted is the SPI flash chip:<br/>
-			<img src="../images/x60_unbrick/0016.jpg" alt="" />
-		</p>
-		<p>
-			Now wire up the BBB and the Pomona with your PSU.<br/>
-			Refer to <a href="bbb_setup.html">bbb_setup.html</a> for how to setup
-			the BBB for flashing.<br/>
-			<b>Note, the guide mentions a 3.3v DC PSU but you don't need this on the X60:
-			if you don't have or don't want to use an external PSU, then make
-			sure not to connect the red/black 3.3v leads mentioned in the guide;
-			instead, connect the AC adapter (the one that normally charges your
-			battery) so that the board has power (but don't boot it up)</b>
-			<img src="../images/x60_unbrick/0017.jpg" alt="" /><br/>
-			Correlate the following with the BBB guide linked above:
-		</p>
+		<h1 id="recovery">bad rom (or user error), machine won't boot</h1>
+			<p>
+				In this scenario, you compiled a ROM that had an incorrect configuration, or there is an actual bug preventing your machine from
+				booting. Or, maybe, you set BUC.TS to 0 and shut down after first flash while Lenovo BIOS was running. In any case, your machine is bricked and will not boot at all.
+			</p>
+			<p>
+				&quot;Unbricking&quot; means flashing a known-good (working) ROM. The problem: you can't boot the machine, making this difficult. In this situation, external hardware (see hardware requirements above) is needed which can flash the SPI chip (where libreboot resides).
+			</p>
+			<p>
+				Remove those screws:<br/>
+				<img src="../images/x60_unbrick/0000.jpg" alt="" />
+			</p>
+			<p>
+				Push the keyboard forward (carefully):<br/>
+				<img src="../images/x60_unbrick/0001.jpg" alt="" />
+			</p>
+			<p>
+				Lift the keyboard up and disconnect it from the board:<br/>
+				<img src="../images/x60_unbrick/0002.jpg" alt="" />
+			</p>
+			<p>
+				Grab the right-hand side of the chassis and force it off (gently) and pry up the rest of the chassis:<br/>
+				<img src="../images/x60_unbrick/0003.jpg" alt="" />
+			</p>
+			<p>
+				You should now have this:<br/>
+				<img src="../images/x60_unbrick/0004.jpg" alt="" />
+			</p>
+			<p>
+				Disconnect the wifi antenna cables, the modem cable and the speaker:<br/>
+				<img src="../images/x60_unbrick/0005.jpg" alt="" />
+			</p>
+			<p>
+				Unroute the cables along their path, carefully lifting the tape that holds them in place. Then, disconnect the modem
+				cable (other end) and power connection and unroute all the cables so that they dangle by the monitor hinge on the right-hand
+				side:<br/>
+				<img src="../images/x60_unbrick/0006.jpg" alt="" />
+			</p>
+			<p>
+				Disconnect the monitor from the motherboard, and unroute the grey antenna cable, carefully lifting the tape
+				that holds it into place:<br/>
+				<img src="../images/x60_unbrick/0008.jpg" alt="" />
+			</p>
+			<p>
+				Carefully lift the remaining tape and unroute the left antenna cable so that it is loose:<br/>
+				<img src="../images/x60_unbrick/0009.jpg" alt="" />
+			</p>
+			<p>
+				Remove the screw that is highlighted (do NOT remove the other one; it holds part of the heatsink (other side) into place):<br/>
+				<img src="../images/x60_unbrick/0011.jpg" alt="" />
+			</p>
+			<p>
+				Remove those screws:<br/>
+				<img src="../images/x60_unbrick/0012.jpg" alt="" />
+			</p>
+			<p>
+				Carefully remove the plate, like so:<br/>
+				<img src="../images/x60_unbrick/0013.jpg" alt="" />
+			</p>
+			<p>
+				Remove the SATA connector:<br/>
+				<img src="../images/x60_unbrick/0014.jpg" alt="" />
+			</p>
+			<p>
+				Now remove the motherboard (gently) and cast the lcd/chassis aside:<br/>
+				<img src="../images/x60_unbrick/0015.jpg" alt="" />
+			</p>
+			<p>
+				Lift back that tape and hold it with something. Highlighted is the SPI flash chip:<br/>
+				<img src="../images/x60_unbrick/0016.jpg" alt="" />
+			</p>
+			<p>
+				Now wire up the BBB and the Pomona with your PSU.<br/>
+				Refer to <a href="bbb_setup.html">bbb_setup.html</a> for how to setup
+				the BBB for flashing.<br/>
+				<b>Note, the guide mentions a 3.3v DC PSU but you don't need this on the X60:
+				if you don't have or don't want to use an external PSU, then make
+				sure not to connect the red/black 3.3v leads mentioned in the guide;
+				instead, connect the AC adapter (the one that normally charges your
+				battery) so that the board has power (but don't boot it up)</b>
+				<img src="../images/x60_unbrick/0017.jpg" alt="" /><br/>
+				Correlate the following with the BBB guide linked above:
+			</p>
 <pre>
 POMONA 5250:
 ===  golden finger and wifi switch ====
@@ -141,132 +146,136 @@ POMONA 5250:
 <i>This is how you will connect. Numbers refer to pin numbers on the BBB, on the plugs near the DC jack.</i>
 </pre>
 
-		<p>
-			Connecting the BBB and pomona (in this image, an external 3.3v DC PSU was used):<br/>
-			<img src="images/x60/th_bbb_flashing.jpg" alt="" />
-		</p>
+			<p>
+				Connecting the BBB and pomona (in this image, an external 3.3v DC PSU was used):<br/>
+				<img src="images/x60/th_bbb_flashing.jpg" alt="" />
+			</p>
 
-		<p>
-			SSH'd into the BBB:<br/>
-			# <b>./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w yourrom.rom</b>
-		</p>
-		<p>
-			It should be <b>Verifying flash... VERIFIED</b> at the end. If flashrom complains about multiple flash chip
-			definitions detected, then choose one of them following the instructions in the output.
-		</p>
+			<p>
+				SSH'd into the BBB:<br/>
+				# <b>./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w yourrom.rom</b>
+			</p>
+			<p>
+				It should be <b>Verifying flash... VERIFIED</b> at the end. If flashrom complains about multiple flash chip
+				definitions detected, then choose one of them following the instructions in the output.
+			</p>
+
+			<p>
+				Remove the programmer and put it away somewhere. Put back the tape and press firmly over it:<br/>
+				<img src="../images/x60_unbrick/0026.jpg" alt="" />
+			</p>
+			<p>
+				Your empty chassis:<br/>
+				<img src="../images/x60_unbrick/0027.jpg" alt="" />
+			</p>
+			<p>
+				Put the motherboard back in:<br/>
+				<img src="../images/x60_unbrick/0028.jpg" alt="" />
+			</p>
+			<p>
+				Reconnect SATA:<br/>
+				<img src="../images/x60_unbrick/0029.jpg" alt="" />
+			</p>
+			<p>
+				Put the plate back and re-insert those screws:<br/>
+				<img src="../images/x60_unbrick/0030.jpg" alt="" />
+			</p>
+			<p>
+				Re-route that antenna cable around the fan and apply the tape:<br/>
+				<img src="../images/x60_unbrick/0031.jpg" alt="" />
+			</p>
+			<p>
+				Route the cable here and then (not shown, due to error on my part) reconnect the monitor cable to the motherboard
+				and re-insert the screws:<br/>
+				<img src="../images/x60_unbrick/0032.jpg" alt="" />
+			</p>
+			<p>
+				Re-insert that screw:<br/>
+				<img src="../images/x60_unbrick/0033.jpg" alt="" />
+			</p>
+			<p>
+				Route the black antenna cable like so:<br/>
+				<img src="../images/x60_unbrick/0034.jpg" alt="" />
+			</p>
+			<p>
+				Tuck it in neatly like so:<br/>
+				<img src="../images/x60_unbrick/0035.jpg" alt="" />
+			</p>
+			<p>
+				Route the modem cable like so:<br/>
+				<img src="../images/x60_unbrick/0036.jpg" alt="" />
+			</p>
+			<p>
+				Connect modem cable to board and tuck it in neatly like so:<br/>
+				<img src="../images/x60_unbrick/0037.jpg" alt="" />
+			</p>
+			<p>
+				Route the power connection and connect it to the board like so:<br/>
+				<img src="../images/x60_unbrick/0038.jpg" alt="" />
+			</p>
+			<p>
+				Route the antenna and modem cables neatly like so:<br/>
+				<img src="../images/x60_unbrick/0039.jpg" alt="" />
+			</p>
+			<p>
+				Connect the wifi antenna cables. At the start of the tutorial, this machine had an Intel wifi chip. Here you see I've replaced it with an 
+				Atheros AR5B95 (supports 802.11n and can be used without blobs):<br/>
+				<img src="../images/x60_unbrick/0040.jpg" alt="" />
+			</p>
+			<p>
+				Connect the modem cable:<br/>
+				<img src="../images/x60_unbrick/0041.jpg" alt="" />
+			</p>
+			<p>
+				Connect the speaker:<br/>
+				<img src="../images/x60_unbrick/0042.jpg" alt="" />
+			</p>
+			<p>
+				You should now have this:<br/>
+				<img src="../images/x60_unbrick/0043.jpg" alt="" />
+			</p>
+			<p>
+				Re-connect the upper chassis:<br/>
+				<img src="../images/x60_unbrick/0044.jpg" alt="" />
+			</p>
+			<p>
+				Re-connect the keyboard:<br/>
+				<img src="../images/x60_unbrick/0045.jpg" alt="" />
+			</p>
+			<p>
+				Re-insert the screws that you removed earlier:<br/>
+				<img src="../images/x60_unbrick/0046.jpg" alt="" />
+			</p>
+			<p>
+				Power on!<br/>
+				<img src="../images/x60_unbrick/0047.jpg" alt="" />
+			</p>
+			<p>
+				Trisquel live USB menu (using the GRUB ISOLINUX parser):<br/>
+				<img src="../images/x60_unbrick/0048.jpg" alt="" />
+			</p>
+			<p>
+				Trisquel live desktop:<br/>
+				<img src="../images/x60_unbrick/0049.jpg" alt="" />
+			</p>
+			
+	</div>
+
+	<div class="section">
 
 		<p>
-			Remove the programmer and put it away somewhere. Put back the tape and press firmly over it:<br/>
-			<img src="../images/x60_unbrick/0026.jpg" alt="" />
-		</p>
-		<p>
-			Your empty chassis:<br/>
-			<img src="../images/x60_unbrick/0027.jpg" alt="" />
-		</p>
-		<p>
-			Put the motherboard back in:<br/>
-			<img src="../images/x60_unbrick/0028.jpg" alt="" />
-		</p>
-		<p>
-			Reconnect SATA:<br/>
-			<img src="../images/x60_unbrick/0029.jpg" alt="" />
-		</p>
-		<p>
-			Put the plate back and re-insert those screws:<br/>
-			<img src="../images/x60_unbrick/0030.jpg" alt="" />
-		</p>
-		<p>
-			Re-route that antenna cable around the fan and apply the tape:<br/>
-			<img src="../images/x60_unbrick/0031.jpg" alt="" />
-		</p>
-		<p>
-			Route the cable here and then (not shown, due to error on my part) reconnect the monitor cable to the motherboard
-			and re-insert the screws:<br/>
-			<img src="../images/x60_unbrick/0032.jpg" alt="" />
-		</p>
-		<p>
-			Re-insert that screw:<br/>
-			<img src="../images/x60_unbrick/0033.jpg" alt="" />
-		</p>
-		<p>
-			Route the black antenna cable like so:<br/>
-			<img src="../images/x60_unbrick/0034.jpg" alt="" />
-		</p>
-		<p>
-			Tuck it in neatly like so:<br/>
-			<img src="../images/x60_unbrick/0035.jpg" alt="" />
-		</p>
-		<p>
-			Route the modem cable like so:<br/>
-			<img src="../images/x60_unbrick/0036.jpg" alt="" />
-		</p>
-		<p>
-			Connect modem cable to board and tuck it in neatly like so:<br/>
-			<img src="../images/x60_unbrick/0037.jpg" alt="" />
-		</p>
-		<p>
-			Route the power connection and connect it to the board like so:<br/>
-			<img src="../images/x60_unbrick/0038.jpg" alt="" />
-		</p>
-		<p>
-			Route the antenna and modem cables neatly like so:<br/>
-			<img src="../images/x60_unbrick/0039.jpg" alt="" />
-		</p>
-		<p>
-			Connect the wifi antenna cables. At the start of the tutorial, this machine had an Intel wifi chip. Here you see I've replaced it with an 
-			Atheros AR5B95 (supports 802.11n and can be used without blobs):<br/>
-			<img src="../images/x60_unbrick/0040.jpg" alt="" />
-		</p>
-		<p>
-			Connect the modem cable:<br/>
-			<img src="../images/x60_unbrick/0041.jpg" alt="" />
-		</p>
-		<p>
-			Connect the speaker:<br/>
-			<img src="../images/x60_unbrick/0042.jpg" alt="" />
-		</p>
-		<p>
-			You should now have this:<br/>
-			<img src="../images/x60_unbrick/0043.jpg" alt="" />
-		</p>
-		<p>
-			Re-connect the upper chassis:<br/>
-			<img src="../images/x60_unbrick/0044.jpg" alt="" />
-		</p>
-		<p>
-			Re-connect the keyboard:<br/>
-			<img src="../images/x60_unbrick/0045.jpg" alt="" />
-		</p>
-		<p>
-			Re-insert the screws that you removed earlier:<br/>
-			<img src="../images/x60_unbrick/0046.jpg" alt="" />
-		</p>
-		<p>
-			Power on!<br/>
-			<img src="../images/x60_unbrick/0047.jpg" alt="" />
-		</p>
-		<p>
-			Trisquel live USB menu (using the GRUB ISOLINUX parser):<br/>
-			<img src="../images/x60_unbrick/0048.jpg" alt="" />
+			Copyright &copy; 2014, 2015 Francis Rowe &lt;info@gluglug.org.uk&gt;<br/>
+			This document is released under the Creative Commons Attribution-ShareAlike 4.0 International Public License and all future versions.
+			A copy of the license can be found at <a href="../license.txt">../license.txt</a>.
 		</p>
+
 		<p>
-			Trisquel live desktop:<br/>
-			<img src="../images/x60_unbrick/0049.jpg" alt="" />
+			This document is distributed in the hope that it will be useful,
+			but WITHOUT ANY WARRANTY; without even the implied warranty of
+			MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See <a href="../license.txt">../license.txt</a> for more information.
 		</p>
-
-<hr/>
-
-	<p>
-		Copyright &copy; 2014 Francis Rowe &lt;info@gluglug.org.uk&gt;<br/>
-		This document is released under the Creative Commons Attribution-ShareAlike 4.0 International Public License and all future versions.
-		A copy of the license can be found at <a href="../license.txt">../license.txt</a>.
-	</p>
-
-	<p>
-		This document is distributed in the hope that it will be useful,
-		but WITHOUT ANY WARRANTY; without even the implied warranty of
-		MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See <a href="../license.txt">../license.txt</a> for more information.
-	</p>
+		
+	</div>
 
 </body>
 </html>
diff --git a/docs/install/x60tablet_unbrick.html b/docs/install/x60tablet_unbrick.html
index 0510867..3623482 100644
--- a/docs/install/x60tablet_unbrick.html
+++ b/docs/install/x60tablet_unbrick.html
@@ -8,120 +8,125 @@
 		@import url('../css/main.css');
 	</style>
 
-	<title>Libreboot documentation: Unbricking the ThinkPad X60 Tablet</title>
+	<title>Unbricking the ThinkPad X60 Tablet</title>
 </head>
 
 <body>
 
-	<header>
-		<h1>Unbricking the ThinkPad X60</h1>
-		<aside>This guide will show you how to recover from a bad flash that prevents your ThinkPad X60 Tablet from booting.</aside>
-	</header>
-
-	<p>Or go <a href="index.html">back to main index</a></p>
-
-	<h2>Table of Contents</h2>
-		<ul>
-			<li>
-				Types of brick:
-				<ul>
-					<li><a href="#bucts_brick">Brick type 1: bucts not reset</a></li>
-					<li><a href="#recovery">Brick type 2: bad rom (or user error), machine won't boot</a></li>
-				</ul>
-			</li>
-		</ul>
-
-	<h1 id="bucts_brick">Brick type 1: bucts not reset.</h1>
-		<p>
-			You still have Lenovo BIOS, or you had libreboot running and you flashed another ROM; and you had bucts 1 set and
-			the ROM wasn't dd'd.* or if Lenovo BIOS was present and libreboot wasn't flashed.<br/><br/>
-
-			In this case, unbricking is easy: reset BUC.TS to 0 by removing that yellow cmos coin (it's a battery) and putting it back after a minute or two:<br/>
-			<img src="../images/x60t_unbrick/0008.JPG" alt="" /><br/><br/>
-
-			*Those dd commands should be applied to all newly compiled X60 ROM images (the ROM images in libreboot binary archives already have this applied!):<br/>
-			dd if=coreboot.rom of=top64k.bin bs=1 skip=$[$(stat -c %s coreboot.rom) - 0x10000] count=64k<br/>
-			dd if=coreboot.rom bs=1 skip=$[$(stat -c %s coreboot.rom) - 0x20000] count=64k | hexdump<br/>
-			dd if=top64k.bin of=coreboot.rom bs=1 seek=$[$(stat -c %s coreboot.rom) - 0x20000] count=64k conv=notrunc<br/>
-			(doing this makes the ROM suitable for use when flashing a machine that still has Lenovo BIOS running,
-			using those instructions: <a href="http://www.coreboot.org/Board:lenovo/x60/Installation">http://www.coreboot.org/Board:lenovo/x60/Installation</a>.
-		</p>
-
-	<h1 id="recovery">bad rom (or user error), machine won't boot</h1>
-		<p>
-			In this scenario, you compiled a ROM that had an incorrect configuration, or there is an actual bug preventing your machine from
-			booting. Or, maybe, you set BUC.TS to 0 and shut down after first flash while Lenovo BIOS was running. In any case, your machine is bricked and will not boot at all.
-		</p>
-		<p>
-			&quot;Unbricking&quot; means flashing a known-good (working) ROM. The problem: you can't boot the machine, making this difficult. In this situation, external hardware (see hardware requirements above) is needed which can flash the SPI chip (where libreboot resides).
-		</p>
-
-		<p>
-			<img src="../images/x60t_unbrick/0000.JPG" alt="" />
-		</p>
-
-		<p>
-			Remove those screws:<br/>
-			<img src="../images/x60t_unbrick/0001.JPG" alt="" />
-		</p>
-
-		<p>
-			Remove the HDD:<br/>
-			<img src="../images/x60t_unbrick/0002.JPG" alt="" />
-		</p>
-
-		<p>
-			Push keyboard forward to loosen it:<br/>
-			<img src="../images/x60t_unbrick/0003.JPG" alt="" />
-		</p>
-
-		<p>
-			Lift:<br/>
-			<img src="../images/x60t_unbrick/0004.JPG" alt="" />
-		</p>
-
-		<p>
-			Remove those:<br/>
-			<img src="../images/x60t_unbrick/0005.JPG" alt="" />
-		</p>
-
-		<p>
+	<div class="section">
+		<h1>Unbricking the ThinkPad X60 Tablet</h1>
+			<p>This guide will show you how to recover from a bad flash that prevents your ThinkPad X60 Tablet from booting.</p>
+			<p><a href="index.html">Back to previous index</a></p>
+	</div>
+
+	<div class="section">
+		<h2>Table of Contents</h2>
+			<ul>
+				<li>
+					Types of brick:
+					<ul>
+						<li><a href="#bucts_brick">Brick type 1: bucts not reset</a></li>
+						<li><a href="#recovery">Brick type 2: bad rom (or user error), machine won't boot</a></li>
+					</ul>
+				</li>
+			</ul>
+	</div>
+
+	<div class="section">
+		<h1 id="bucts_brick">Brick type 1: bucts not reset.</h1>
+			<p>
+				You still have Lenovo BIOS, or you had libreboot running and you flashed another ROM; and you had bucts 1 set and
+				the ROM wasn't dd'd.* or if Lenovo BIOS was present and libreboot wasn't flashed.<br/><br/>
+
+				In this case, unbricking is easy: reset BUC.TS to 0 by removing that yellow cmos coin (it's a battery) and putting it back after a minute or two:<br/>
+				<img src="../images/x60t_unbrick/0008.JPG" alt="" /><br/><br/>
+
+				*Those dd commands should be applied to all newly compiled X60 ROM images (the ROM images in libreboot binary archives already have this applied!):<br/>
+				dd if=coreboot.rom of=top64k.bin bs=1 skip=$[$(stat -c %s coreboot.rom) - 0x10000] count=64k<br/>
+				dd if=coreboot.rom bs=1 skip=$[$(stat -c %s coreboot.rom) - 0x20000] count=64k | hexdump<br/>
+				dd if=top64k.bin of=coreboot.rom bs=1 seek=$[$(stat -c %s coreboot.rom) - 0x20000] count=64k conv=notrunc<br/>
+				(doing this makes the ROM suitable for use when flashing a machine that still has Lenovo BIOS running,
+				using those instructions: <a href="http://www.coreboot.org/Board:lenovo/x60/Installation">http://www.coreboot.org/Board:lenovo/x60/Installation</a>.
+			</p>
+	</div>
+
+	<div class="section">
+
+		<h1 id="recovery">bad rom (or user error), machine won't boot</h1>
+			<p>
+				In this scenario, you compiled a ROM that had an incorrect configuration, or there is an actual bug preventing your machine from
+				booting. Or, maybe, you set BUC.TS to 0 and shut down after first flash while Lenovo BIOS was running. In any case, your machine is bricked and will not boot at all.
+			</p>
+			<p>
+				&quot;Unbricking&quot; means flashing a known-good (working) ROM. The problem: you can't boot the machine, making this difficult. In this situation, external hardware (see hardware requirements above) is needed which can flash the SPI chip (where libreboot resides).
+			</p>
+
+			<p>
+				<img src="../images/x60t_unbrick/0000.JPG" alt="" />
+			</p>
+
+			<p>
+				Remove those screws:<br/>
+				<img src="../images/x60t_unbrick/0001.JPG" alt="" />
+			</p>
+
+			<p>
+				Remove the HDD:<br/>
+				<img src="../images/x60t_unbrick/0002.JPG" alt="" />
+			</p>
+
+			<p>
+				Push keyboard forward to loosen it:<br/>
+				<img src="../images/x60t_unbrick/0003.JPG" alt="" />
+			</p>
+
+			<p>
+				Lift:<br/>
+				<img src="../images/x60t_unbrick/0004.JPG" alt="" />
+			</p>
+
+			<p>
+				Remove those:<br/>
+				<img src="../images/x60t_unbrick/0005.JPG" alt="" />
+			</p>
+
+			<p>
+				
+				<img src="../images/x60t_unbrick/0006.JPG" alt="" />
+			</p>
+
+			<p>
+				Also remove that (marked) and unroute the antenna cables:<br/>
+				<img src="../images/x60t_unbrick/0007.JPG" alt="" />
+			</p>
+
+			<p>
+				For some X60T laptops, you have to unroute those too:<br/>
+				<img src="../images/x60t_unbrick/0010.JPG" alt="" />
+			</p>
+
+			<p>
+				Remove the LCD extend board screws. Also remove those screws (see blue marks) and remove/unroute the cables and remove the metal plate:<br/>
+				<img src="../images/x60t_unbrick/0008.JPG" alt="" />
+			</p>
+
+			<p>
+				Remove that screw and then remove the board:<br/>
+				<img src="../images/x60t_unbrick/0009.JPG" alt="" />
+			</p>
 			
-			<img src="../images/x60t_unbrick/0006.JPG" alt="" />
-		</p>
-
-		<p>
-			Also remove that (marked) and unroute the antenna cables:<br/>
-			<img src="../images/x60t_unbrick/0007.JPG" alt="" />
-		</p>
-
-		<p>
-			For some X60T laptops, you have to unroute those too:<br/>
-			<img src="../images/x60t_unbrick/0010.JPG" alt="" />
-		</p>
-
-		<p>
-			Remove the LCD extend board screws. Also remove those screws (see blue marks) and remove/unroute the cables and remove the metal plate:<br/>
-			<img src="../images/x60t_unbrick/0008.JPG" alt="" />
-		</p>
-
-		<p>
-			Remove that screw and then remove the board:<br/>
-			<img src="../images/x60t_unbrick/0009.JPG" alt="" />
-		</p>
-		
-		<p>
-			Now wire up the BBB and the Pomona with your PSU.<br/>
-			Refer to <a href="bbb_setup.html">bbb_setup.html</a> for how to setup
-			the BBB for flashing.<br/>
-			<b>Note, the guide mentions a 3.3v DC PSU but you don't need this on the X60 Tablet:
-			if you don't have or don't want to use an external PSU, then make
-			sure not to connect the red/black 3.3v leads mentioned in the guide;
-			instead, connect the AC adapter (the one that normally charges your
-			battery) so that the board has power (but don't boot it up)</b>
-			<img src="../images/x60t_unbrick/0011.JPG" alt="" /><br/>
-			Correlate the following with the BBB guide linked above:
-		</p>
+			<p>
+				Now wire up the BBB and the Pomona with your PSU.<br/>
+				Refer to <a href="bbb_setup.html">bbb_setup.html</a> for how to setup
+				the BBB for flashing.<br/>
+				<b>Note, the guide mentions a 3.3v DC PSU but you don't need this on the X60 Tablet:
+				if you don't have or don't want to use an external PSU, then make
+				sure not to connect the red/black 3.3v leads mentioned in the guide;
+				instead, connect the AC adapter (the one that normally charges your
+				battery) so that the board has power (but don't boot it up)</b>
+				<img src="../images/x60t_unbrick/0011.JPG" alt="" /><br/>
+				Correlate the following with the BBB guide linked above:
+			</p>
 <pre>
 POMONA 5250:
 ===  golden finger and wifi switch ====
@@ -133,37 +138,41 @@ POMONA 5250:
 <i>This is how you will connect. Numbers refer to pin numbers on the BBB, on the plugs near the DC jack.</i>
 </pre>
 
-		<p>
-			Connecting the BBB and pomona (in this image, an external 3.3v DC PSU was used):<br/>
-			<img src="images/x60/th_bbb_flashing.jpg" alt="" />
-		</p>
+			<p>
+				Connecting the BBB and pomona (in this image, an external 3.3v DC PSU was used):<br/>
+				<img src="images/x60/th_bbb_flashing.jpg" alt="" />
+			</p>
+
+			<p>
+				SSH'd into the BBB:<br/>
+				# <b>./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w yourrom.rom</b>
+			</p>
+			<p>
+				It should be <b>Verifying flash... VERIFIED</b> at the end. If flashrom complains about multiple flash chip
+				definitions detected, then choose one of them following the instructions in the output.
+			</p>
+
+			<p>
+				Reverse the steps to re-assemble your machine.
+			</p>
+			
+	</div>
+
+	<div class="section">
 
 		<p>
-			SSH'd into the BBB:<br/>
-			# <b>./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w yourrom.rom</b>
-		</p>
-		<p>
-			It should be <b>Verifying flash... VERIFIED</b> at the end. If flashrom complains about multiple flash chip
-			definitions detected, then choose one of them following the instructions in the output.
+			Copyright &copy; 2014, 2015 Francis Rowe &lt;info@gluglug.org.uk&gt;<br/>
+			This document is released under the Creative Commons Attribution-ShareAlike 4.0 International Public License and all future versions.
+			A copy of the license can be found at <a href="../license.txt">../license.txt</a>.
 		</p>
 
 		<p>
-			Reverse the steps to re-assemble your machine.
+			This document is distributed in the hope that it will be useful,
+			but WITHOUT ANY WARRANTY; without even the implied warranty of
+			MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See <a href="../license.txt">../license.txt</a> for more information.
 		</p>
-
-<hr/>
-
-	<p>
-		Copyright &copy; 2014 Francis Rowe &lt;info@gluglug.org.uk&gt;<br/>
-		This document is released under the Creative Commons Attribution-ShareAlike 4.0 International Public License and all future versions.
-		A copy of the license can be found at <a href="../license.txt">../license.txt</a>.
-	</p>
-
-	<p>
-		This document is distributed in the hope that it will be useful,
-		but WITHOUT ANY WARRANTY; without even the implied warranty of
-		MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See <a href="../license.txt">../license.txt</a> for more information.
-	</p>
+		
+	</div>
 
 </body>
 </html>
author	Francis Rowe <info@gluglug.org.uk>	2015-02-04 04:14:49 (EST)
committer	Francis Rowe <info@gluglug.org.uk>	2015-02-04 04:14:49 (EST)
commit	4c3d46238022f0c9955ae7e8b10c9f1716dd871a (patch)
tree	8639e21d93df6493d952bda5f324efbe4d89447f /docs/install
parent	5b6f5884280657c8554035503ee2bde5d84a276c (diff)
download	libreboot-4c3d46238022f0c9955ae7e8b10c9f1716dd871a.zip libreboot-4c3d46238022f0c9955ae7e8b10c9f1716dd871a.tar.gz libreboot-4c3d46238022f0c9955ae7e8b10c9f1716dd871a.tar.bz2