;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;; Begin LulzBot TAZ 6 Single Extruder v2.1 end G-code ;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; Ensure moves are complete M400 ; Pause processing until moves complete ; Begin cooling M104 S ; Cool hotend to retraction without waiting M140 S ; Cool bed to removal temp without waiting M107 ; Turn off the print cooling fan ; Retract and re-prime filament G91 ; Make below Z and E movements relative G1 E-3 F1000 ; Retract some filament from the nozzle G1 Z20 E-3 F3000 ; Lift nozzle and retract more filament G1 E6 F3000 ; Re-prime nozzle (T584) G90 ; Restore absolute positioning mode ; Cool bed M117 Moving to cool... G1 Y0 F3000 ; Move bed to cooling position M400 ; Don't show status until moved M190 R ; Wait for bed to cool ; Move to print removal position M117 Printing complete G1 X-19 Y280 F3000 ; Move bed forward and toolhead left M84 ; Turn off stepper motors (implicit M400) M77 ; Stop print job timer M300 P200 ; Beep ; Optionally keep hotend and bed warm M104 S0 ; Cool hotend without waiting M140 S0 ; Cool bed without waiting M0 Done, keep warm? M104 S ; Set hotend to retraction without waiting M140 S ; Set bed to removal temp without waiting ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;; End LulzBot TAZ 6 Single Extruder v2.1 end G-code ;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;