From ebf981b119281d4543c56bb93168dd88ec7cd425 Mon Sep 17 00:00:00 2001
From: Patrick McDermott <patrick.mcdermott@libiquity.com>
Date: Mon, 21 Oct 2019 19:02:01 -0400
Subject: PCIe MC Bracket: Increase extrusion widths

---
diff --git a/.Slic3r/print/PCIe MC Bracket.ini b/.Slic3r/print/PCIe MC Bracket.ini
index b1cf950..89c4aa6 100644
--- a/.Slic3r/print/PCIe MC Bracket.ini
+++ b/.Slic3r/print/PCIe MC Bracket.ini
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.2.9 on Mon Oct 21 01:41:42 2019
+# generated by Slic3r 1.2.9 on Mon Oct 21 18:44:06 2019
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 2
 bridge_acceleration = 0
@@ -9,18 +9,18 @@ complete_objects = 0
 default_acceleration = 0
 dont_support_bridges = 1
 external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0
+external_perimeter_extrusion_width = 0.5
 external_perimeter_speed = 30
 external_perimeters_first = 0
 extra_perimeters = 1
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
-extrusion_width = 0.5
+extrusion_width = 0.75
 fill_angle = 45
 fill_density = 10%
 fill_pattern = rectilinear
 first_layer_acceleration = 0
-first_layer_extrusion_width = 0
+first_layer_extrusion_width = 0.75
 first_layer_height = 0.25
 first_layer_speed = 100%
 gap_fill_speed = 40
@@ -28,7 +28,7 @@ gcode_comments = 1
 infill_acceleration = 0
 infill_every_layers = 1
 infill_extruder = 1
-infill_extrusion_width = 0
+infill_extrusion_width = 1
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 0
@@ -45,7 +45,7 @@ output_filename_format = [input_filename_base].gcode
 overhangs = 1
 perimeter_acceleration = 0
 perimeter_extruder = 1
-perimeter_extrusion_width = 0
+perimeter_extrusion_width = 0.5
 perimeter_speed = 30
 perimeters = 2
 post_process = 
@@ -59,7 +59,7 @@ small_perimeter_speed = 30
 solid_infill_below_area = 50
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
-solid_infill_extrusion_width = 0
+solid_infill_extrusion_width = 0.75
 solid_infill_speed = 60
 spiral_vase = 0
 standby_temperature_delta = -5
@@ -79,7 +79,7 @@ support_material_speed = 100
 support_material_threshold = 0
 thin_walls = 1
 threads = 4
-top_infill_extrusion_width = 0
+top_infill_extrusion_width = 0.75
 top_solid_infill_speed = 60
 top_solid_layers = 2
 travel_speed = 250
--
cgit v0.9.1