From d477b4e8d2864d2c610fb7e9b4dae8788fb34f32 Mon Sep 17 00:00:00 2001
From: P. J. McDermott <pj@pehjota.net>
Date: Wed, 16 Aug 2017 18:36:43 -0400
Subject: print: Increase all print speeds to 40 mm/s

---
diff --git a/.Slic3r/print/SFF-8201 HA.ini b/.Slic3r/print/SFF-8201 HA, 40 mm per s.ini
index b5813e0..19151dc 100644
--- a/.Slic3r/print/SFF-8201 HA.ini
+++ b/.Slic3r/print/SFF-8201 HA, 40 mm per s.ini
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.2.9 on Wed Aug 16 17:16:23 2017
+# generated by Slic3r 1.2.9 on Wed Aug 16 18:36:43 2017
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 2
 bridge_acceleration = 0
@@ -10,7 +10,7 @@ default_acceleration = 0
 dont_support_bridges = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0
-external_perimeter_speed = 50%
+external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 1
 extruder_clearance_height = 20
@@ -32,7 +32,7 @@ infill_extrusion_width = 0
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 15%
-infill_speed = 80
+infill_speed = 40
 interface_shells = 0
 layer_height = 0.25
 max_print_speed = 80
@@ -46,7 +46,7 @@ overhangs = 1
 perimeter_acceleration = 0
 perimeter_extruder = 1
 perimeter_extrusion_width = 0
-perimeter_speed = 20
+perimeter_speed = 40
 perimeters = 2
 post_process = 
 raft_layers = 0
@@ -55,12 +55,12 @@ seam_position = aligned
 skirt_distance = 10
 skirt_height = 1
 skirts = 1
-small_perimeter_speed = 20
+small_perimeter_speed = 40
 solid_infill_below_area = 70
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0
-solid_infill_speed = 20
+solid_infill_speed = 40
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
@@ -80,7 +80,7 @@ support_material_threshold = 0
 thin_walls = 1
 threads = 2
 top_infill_extrusion_width = 0
-top_solid_infill_speed = 20
+top_solid_infill_speed = 40
 top_solid_layers = 2
 travel_speed = 130
 xy_size_compensation = 0
--
cgit v0.9.1