From ab84e54274cf87f575ff1436b064ac52df3f9ad9 Mon Sep 17 00:00:00 2001
From: Patrick McDermott <patrick.mcdermott@libiquity.com>
Date: Fri, 18 Oct 2019 23:32:21 -0400
Subject: Base: Reduce layer height to 0.2 mm

Now infill_every_layers is actually effective.
---
diff --git a/.Slic3r/print/Base.ini b/.Slic3r/print/Base.ini
index d7cff46..8ae8306 100644
--- a/.Slic3r/print/Base.ini
+++ b/.Slic3r/print/Base.ini
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.2.9 on Fri Oct 18 22:42:49 2019
+# generated by Slic3r 1.2.9 on Fri Oct 18 23:28:52 2019
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 2
 bridge_acceleration = 0
@@ -21,7 +21,7 @@ fill_density = 20%
 fill_pattern = rectilinear
 first_layer_acceleration = 0
 first_layer_extrusion_width = 0
-first_layer_height = 0.25
+first_layer_height = 0.2
 first_layer_speed = 100%
 gap_fill_speed = 40
 gcode_comments = 1
@@ -34,7 +34,7 @@ infill_only_where_needed = 0
 infill_overlap = 0
 infill_speed = 100
 interface_shells = 0
-layer_height = 0.25
+layer_height = 0.2
 max_print_speed = 80
 max_volumetric_speed = 0
 min_skirt_length = 5
--
cgit v0.9.1