From 7997dd0fc06065e069c6d24dd658edce9eb77aaa Mon Sep 17 00:00:00 2001
From: Patrick McDermott <patrick.mcdermott@libiquity.com>
Date: Sun, 20 Oct 2019 23:53:40 -0400
Subject: Base: Slow perimeters to 30 mm/s

This reduces corner seam blobs/zits/bumps/bulges/swell, at a cost of 19
seconds added print time for one PCI Express Mini Card bracket.
---
diff --git a/.Slic3r/print/Base.ini b/.Slic3r/print/Base.ini
index b564fd4..5c688af 100644
--- a/.Slic3r/print/Base.ini
+++ b/.Slic3r/print/Base.ini
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.2.9 on Sun Oct 20 23:18:50 2019
+# generated by Slic3r 1.2.9 on Sun Oct 20 23:53:33 2019
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 2
 bridge_acceleration = 0
@@ -10,7 +10,7 @@ default_acceleration = 0
 dont_support_bridges = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0
-external_perimeter_speed = 40
+external_perimeter_speed = 30
 external_perimeters_first = 0
 extra_perimeters = 1
 extruder_clearance_height = 20
@@ -46,7 +46,7 @@ overhangs = 1
 perimeter_acceleration = 0
 perimeter_extruder = 1
 perimeter_extrusion_width = 0
-perimeter_speed = 40
+perimeter_speed = 30
 perimeters = 2
 post_process = 
 raft_layers = 0
@@ -55,7 +55,7 @@ seam_position = aligned
 skirt_distance = 5
 skirt_height = 1
 skirts = 1
-small_perimeter_speed = 40
+small_perimeter_speed = 30
 solid_infill_below_area = 50
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
--
cgit v0.9.1