From 530be3b341aa66d1e7c951e3c20c8229f8131efc Mon Sep 17 00:00:00 2001
From: Patrick McDermott <patrick.mcdermott@libiquity.com>
Date: Fri, 18 Oct 2019 02:12:06 -0400
Subject: filaments: Set min fan speed to 0

`M106 S1` is enough to spin up the fans.
---
diff --git a/.Slic3r/filament/eSUN HIPS, 3 mm.ini b/.Slic3r/filament/eSUN HIPS, 3 mm.ini
index d4ce724..73a540c 100644
--- a/.Slic3r/filament/eSUN HIPS, 3 mm.ini
+++ b/.Slic3r/filament/eSUN HIPS, 3 mm.ini
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.2.9 on Fri Oct 18 00:15:30 2019
+# generated by Slic3r 1.2.9 on Fri Oct 18 02:11:35 2019
 bed_temperature = 90
 bridge_fan_speed = 100
 cooling = 1
@@ -11,7 +11,7 @@ filament_diameter = 2.95
 first_layer_bed_temperature = 90
 first_layer_temperature = 230
 max_fan_speed = 100
-min_fan_speed = 25
+min_fan_speed = 0
 min_print_speed = 10
 slowdown_below_layer_time = 5
 temperature = 230
diff --git a/.Slic3r/filament/eSUN PLA, 3 mm.ini b/.Slic3r/filament/eSUN PLA, 3 mm.ini
index f70e9cd..ced0ef9 100644
--- a/.Slic3r/filament/eSUN PLA, 3 mm.ini
+++ b/.Slic3r/filament/eSUN PLA, 3 mm.ini
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.2.9 on Sat Feb 16 14:54:52 2019
+# generated by Slic3r 1.2.9 on Fri Oct 18 02:11:45 2019
 bed_temperature = 60
 bridge_fan_speed = 100
 cooling = 1
@@ -11,7 +11,7 @@ filament_diameter = 2.95
 first_layer_bed_temperature = 60
 first_layer_temperature = 205
 max_fan_speed = 100
-min_fan_speed = 25
+min_fan_speed = 0
 min_print_speed = 10
 slowdown_below_layer_time = 5
 temperature = 205
--
cgit v0.9.1