From 3fb5799474d920556b73f3d448dc7c33d783ded9 Mon Sep 17 00:00:00 2001
From: Patrick McDermott <patrick.mcdermott@libiquity.com>
Date: Sat, 19 Oct 2019 04:02:47 -0400
Subject: Base: Reduce speeds to 40

---
diff --git a/.Slic3r/print/Base.ini b/.Slic3r/print/Base.ini
index 09e951d..d17934f 100644
--- a/.Slic3r/print/Base.ini
+++ b/.Slic3r/print/Base.ini
@@ -1,16 +1,16 @@
-# generated by Slic3r 1.2.9 on Sat Oct 19 03:34:33 2019
+# generated by Slic3r 1.2.9 on Sat Oct 19 04:00:26 2019
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 2
 bridge_acceleration = 0
 bridge_flow_ratio = 1
-bridge_speed = 60
+bridge_speed = 40
 brim_width = 0
 complete_objects = 0
 default_acceleration = 0
 dont_support_bridges = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0
-external_perimeter_speed = 100
+external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 1
 extruder_clearance_height = 20
@@ -32,7 +32,7 @@ infill_extrusion_width = 0
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 0
-infill_speed = 100
+infill_speed = 40
 interface_shells = 0
 layer_height = 0.25
 max_print_speed = 80
@@ -46,7 +46,7 @@ overhangs = 1
 perimeter_acceleration = 0
 perimeter_extruder = 1
 perimeter_extrusion_width = 0
-perimeter_speed = 100
+perimeter_speed = 40
 perimeters = 2
 post_process = 
 raft_layers = 0
@@ -55,12 +55,12 @@ seam_position = aligned
 skirt_distance = 5
 skirt_height = 1
 skirts = 1
-small_perimeter_speed = 100
+small_perimeter_speed = 40
 solid_infill_below_area = 50
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0
-solid_infill_speed = 60
+solid_infill_speed = 40
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
@@ -80,7 +80,7 @@ support_material_threshold = 0
 thin_walls = 1
 threads = 4
 top_infill_extrusion_width = 0
-top_solid_infill_speed = 60
+top_solid_infill_speed = 40
 top_solid_layers = 2
 travel_speed = 250
 xy_size_compensation = 0
--
cgit v0.9.1