From 0788865c4bf387d862598a0cb5d9fa1d41014f7a Mon Sep 17 00:00:00 2001
From: P. J. McDermott <pj@pehjota.net>
Date: Thu, 14 Feb 2019 17:38:25 -0500
Subject: Revert "Revert "Base: Increase speeds""

This reverts commit 184eb929444cd45bc49d6eaf33e00be13a89047d.
---
diff --git a/.Slic3r/print/Base.ini b/.Slic3r/print/Base.ini
index 28856d2..0ab7cc0 100644
--- a/.Slic3r/print/Base.ini
+++ b/.Slic3r/print/Base.ini
@@ -1,16 +1,16 @@
-# generated by Slic3r 1.2.9 on Thu Feb 14 16:18:44 2019
+# generated by Slic3r 1.2.9 on Thu Feb 14 16:49:51 2019
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 2
 bridge_acceleration = 0
 bridge_flow_ratio = 1
-bridge_speed = 80
+bridge_speed = 100
 brim_width = 0
 complete_objects = 0
 default_acceleration = 0
 dont_support_bridges = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0
-external_perimeter_speed = 80
+external_perimeter_speed = 100
 external_perimeters_first = 0
 extra_perimeters = 1
 extruder_clearance_height = 20
@@ -23,7 +23,7 @@ first_layer_acceleration = 0
 first_layer_extrusion_width = 0
 first_layer_height = 0.25
 first_layer_speed = 100%
-gap_fill_speed = 40
+gap_fill_speed = 50
 gcode_comments = 1
 infill_acceleration = 0
 infill_every_layers = 2
@@ -32,10 +32,10 @@ infill_extrusion_width = 0
 infill_first = 0
 infill_only_where_needed = 1
 infill_overlap = 10%
-infill_speed = 80
+infill_speed = 100
 interface_shells = 0
 layer_height = 0.25
-max_print_speed = 80
+max_print_speed = 100
 max_volumetric_speed = 0
 min_skirt_length = 5
 notes = 
@@ -46,7 +46,7 @@ overhangs = 1
 perimeter_acceleration = 0
 perimeter_extruder = 1
 perimeter_extrusion_width = 0
-perimeter_speed = 80
+perimeter_speed = 100
 perimeters = 2
 post_process = 
 raft_layers = 0
@@ -55,12 +55,12 @@ seam_position = aligned
 skirt_distance = 5
 skirt_height = 1
 skirts = 1
-small_perimeter_speed = 80
+small_perimeter_speed = 100
 solid_infill_below_area = 50
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0
-solid_infill_speed = 80
+solid_infill_speed = 100
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
@@ -75,12 +75,12 @@ support_material_interface_spacing = 0
 support_material_interface_speed = 100%
 support_material_pattern = pillars
 support_material_spacing = 2.5
-support_material_speed = 80
+support_material_speed = 100
 support_material_threshold = 0
 thin_walls = 1
 threads = 4
 top_infill_extrusion_width = 0
-top_solid_infill_speed = 80
+top_solid_infill_speed = 100
 top_solid_layers = 2
 travel_speed = 250
 xy_size_compensation = 0
--
cgit v0.9.1