From cd1e3c12ffd6712fe1067a58261e0be8eeacd158 Mon Sep 17 00:00:00 2001 From: P. J. McDermott Date: Sun, 10 Feb 2019 17:43:41 -0500 Subject: printer: Begin LulzBot TAZ 6, Single Extruder v2.1 Also add logi1's window geometry in .Slic3r/slic3r.ini. --- (limited to '.Slic3r') diff --git a/.Slic3r/printer/LulzBot TAZ 6, Single Extruder v2.1, PLA.ini b/.Slic3r/printer/LulzBot TAZ 6, Single Extruder v2.1, PLA.ini new file mode 100644 index 0000000..d82e81d --- /dev/null +++ b/.Slic3r/printer/LulzBot TAZ 6, Single Extruder v2.1, PLA.ini @@ -0,0 +1,27 @@ +# generated by Slic3r 1.2.9 on Sun Feb 10 11:58:53 2019 +bed_shape = 0x0,280x0,280x280,0x280 +before_layer_gcode = +end_gcode = \n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n;; Begin LulzBot Mini HIPS end G-code ;;\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n\n; Ensure moves are complete\nM400 ; Pause processing until moves complete\n\n; Begin cooling\nM104 S0 ; Set hotend temperature without waiting\nM140 S0 ; Set bed temperature without waiting\nM107 ; Turn off the print cooling fan\n\n; Move to cooling position and retract filament\nG92 E5 ; Set extruder position for retraction\nG1 X5 Y5 Z160 E0 F10000 ; Move bed and nozzle and retract filament\nM190 R60 ; Wait for bed to cool\n\n; Move to print removal position\nM140 S0 ; Set bed temperature without waiting\nG1 X145 Y190 Z160 F10000 ; Move bed forward and toolhead right\n\n; Idle\nM84 ; Turn off stepper motors\nG90 ; Set absolute positioning mode\n\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n;; End LulzBot Mini HIPS end G-code ;;\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n +extruder_offset = 0x0 +gcode_flavor = reprap +layer_gcode = +nozzle_diameter = 0.5 +octoprint_apikey = +octoprint_host = +pressure_advance = 0 +retract_before_travel = 2 +retract_layer_change = 1 +retract_length = 1 +retract_length_toolchange = 10 +retract_lift = 0.2 +retract_restart_extra = 0 +retract_restart_extra_toolchange = 0 +retract_speed = 40 +start_gcode = \n; Input file name: [input_filename]\n; Printer preset: [printer_preset]\n; Filament preset: [filament_preset]\n; Print preset: [print_preset]\n\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n;; Begin LulzBot Mini HIPS start G-code ;;\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n\n; Set units, positioning modes, and extruder origin\nG21 ; Set units to millimeters\nG90 ; Set absolute positioning mode\nM82 ; Set E absolute mode (override G91)\nG92 E0 ; Set extruder position to 0 (origin)\n\n; Begin heating hotend to HIPS retraction temperature\nM107 ; Turn off the print cooling fan\nM104 S150 ; Set hotend temperature without waiting\nM140 S[first_layer_bed_temperature] ; Set bed temperature without waiting\n\n; While waiting for the hotend to heat, auto-home the axes\nG28 ; Auto-home all axes\nM109 ; Wait for hotend temperature\n\n; Retract filament before wiping\nG1 Z150 E-30 F75 ; Slowly lower Z and retract filament\n\n; Begin heating hotend to HIPS wiping temperature\nM104 S170 ; Set hotend temperature without waiting\n\n; While waiting for the hotend to heat, position the nozzle over the wiping pad\nG1 X45 Y174 Z10 F11520 ; Move nozzle to just over wiping pad\nM109 ; Wait for hotend temperature\n\n; Wipe the nozzle\nG1 Z-0.5 F4000 ; Plunge nozzle into wiping pad\nG1 X55 Y172 F4000 ; Wipe\nG1 X45 Y174 Z0 F4000 ; Wipe\nG1 X55 Y172 F4000 ; Wipe\nG1 X45 Y174 F4000 ; Wipe\nG1 X55 Y172 F4000 ; Wipe\nG1 X45 Y174 F4000 ; Wipe\nG1 X55 Y172 F4000 ; Wipe\nG1 X60 Y174 F4000 ; Wipe\nG1 X80 Y172 F4000 ; Wipe\nG1 X60 Y174 F4000 ; Wipe\nG1 X80 Y172 F4000 ; Wipe\nG1 X60 Y174 F4000 ; Wipe\nG1 X90 Y172 F4000 ; Wipe\nG1 X80 Y174 F4000 ; Wipe\nG1 X100 Y172 F4000 ; Wipe\nG1 X80 Y174 F4000 ; Wipe\nG1 X100 Y172 F4000 ; Wipe\nG1 X80 Y174 F4000 ; Wipe\nG1 X100 Y172 F4000 ; Wipe\nG1 X110 Y174 F4000 ; Wipe\nG1 X100 Y172 F4000 ; Wipe\nG1 X110 Y174 F4000 ; Wipe\nG1 X100 Y172 F4000 ; Wipe\nG1 X110 Y174 F4000 ; Wipe\nG1 X115 Y172 Z-0.5 F1000 ; Wipe slower, bury nozzle in cleanish area\nG1 Z10 ; Lift out of wiping pad\n\n; Begin heating hotend to HIPS probing temperature\nM104 S170 ; Set hotend temperature without waiting\n\n; While waiting for the hotend to heat, auto-home X and Y\nG28 X0 Y0 ; Auto-home X and Y\nM109 ; Wait for hotend temperature\n\n; Probe the bed and enable bed leveling compensation\nM204 S300 ; Set acceleration for probing moves\nG29 ; Probe the bed\nM204 S2000 ; Set acceleration back to normal\nG1 X5 F5000 ; Move away from X endstop\nG1 Z10 F5000 ; Lift off the bed-leveling washer\n\n; Begin heating hotend to first layer temperature\nM104 S[first_layer_temperature] ; Set hotend temperature without waiting\n\n; While waiting for the hotend to heat, position the nozzle and pause\nG1 X5 Y15 F5000 ; Move near front left corner\nG4 S1 ; Dwell/pause command queue for 1 second\nM400 ; Pause processing until moves complete\n\n; Ensure the hotend and bed are at the first layer temperatures\nM109 ; Wait for hotend temperature\nM190 ; Wait for bed temperature\n\n; Extrude filament back into the nozzle\nG1 Z2 E0 F75 ; Slowly raise nozzle and extrude filamant\n\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n;; End LulzBot Mini HIPS start G-code ;;\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n +toolchange_gcode = +use_firmware_retraction = 0 +use_relative_e_distances = 0 +use_volumetric_e = 0 +vibration_limit = 0 +wipe = 0 +z_offset = 0 diff --git a/.Slic3r/slic3r.ini b/.Slic3r/slic3r.ini index 4a2d49d..d501183 100644 --- a/.Slic3r/slic3r.ini +++ b/.Slic3r/slic3r.ini @@ -1,10 +1,10 @@ -# generated by Slic3r 1.2.9 on Tue Aug 22 16:58:05 2017 +# generated by Slic3r 1.2.9 on Sun Feb 10 16:27:15 2019 autocenter = 1 background_processing = 1 last_output_path = /home/cam/sff8201-ha/src main_frame_maximized = 1 -main_frame_pos = 0,48 -main_frame_size = 1280,774 +main_frame_pos = 0,70 +main_frame_size = 1280,976 mode = expert version = 1.2.9 version_check = 1 @@ -12,7 +12,7 @@ version_check = 1 [presets] filament = eSUN HIPS, 3.00 mm.ini print = SFF-8201 HA.ini -printer = LulzBot Mini, HIPS.ini +printer = LulzBot TAZ 6, Single Extruder v2.1, PLA.ini [recent] config_directory = /home/cam -- cgit v0.9.1