From 16e84a0f9c4fb361afd4bce1f9cb8fb350372367 Mon Sep 17 00:00:00 2001
From: P. J. McDermott <pj@pehjota.net>
Date: Mon, 11 Feb 2019 17:13:18 -0500
Subject: printer: Edit TAZ 6 start G-code

  * Allow heating to wiping temperature before retraction completes
  * Allow heating to first layer temperature before probing completes
  * Improve centering M400 comment
---
(limited to '.Slic3r')

diff --git a/.Slic3r/printer/LulzBot TAZ 6, Single Extruder v2.1, PLA - start.gcode b/.Slic3r/printer/LulzBot TAZ 6, Single Extruder v2.1, PLA - start.gcode
index 5159843..7d3b098 100644
--- a/.Slic3r/printer/LulzBot TAZ 6, Single Extruder v2.1, PLA - start.gcode
+++ b/.Slic3r/printer/LulzBot TAZ 6, Single Extruder v2.1, PLA - start.gcode
@@ -35,7 +35,6 @@ M109 R140 ; XXX: MATERIAL-DEPENDENT  ; Wait for hotend temperature
 ; Retract filament before wiping
 M117 Retracting...
 G1 E-30 F100                         ; Retract filament
-M400                                 ; Don't heat or show status until retracted
 
 ;
 ; Wiping
@@ -43,6 +42,7 @@ M400                                 ; Don't heat or show status until retracted
 
 ; Begin heating hotend to wiping temperature
 M104 S140 ; XXX: MATERIAL-DEPENDENT  ; Set hotend temperature without waiting
+M400                                 ; Don't show status until retracted
 
 ; While waiting for the hotend to heat, position the nozzle over the wiping pad
 M117 Moving to wipe...
@@ -97,7 +97,6 @@ M204 S100                            ; Set acceleration for probing moves
 G29                                  ; Probe the bed
 M204 S500                            ; Set acceleration back to normal
 M420 S1                              ; Enable bed leveling with new matrix
-M400                                 ; Don't heat until done probing
 G1 Z10 F5000                         ; Lift off the bed-leveling washer
 
 ;
@@ -106,11 +105,12 @@ G1 Z10 F5000                         ; Lift off the bed-leveling washer
 
 ; Begin heating hotend to first layer temperature
 M104 S[first_layer_temperature]      ; Set hotend temperature without waiting
+M400                                 ; Don't show status until done probing
 
 ; While waiting for the hotend to heat, position the nozzle and pause
 M117 Moving to center...
 G1 X140 Y140 Z2 F5000                ; Move to center
-M400                                 ; Pause until centered
+M400                                 ; Don't show status until centered
 
 ; Ensure the hotend and bed are at the first layer temperatures
 M109 R205 ; XXX: MATERIAL-DEPENDENT  ; Wait for hotend temperature
--
cgit v0.9.1