From f17d045bdccd52c12e16bcb0e61e710a09f6fbb7 Mon Sep 17 00:00:00 2001
From: P. J. McDermott <pj@pehjota.net>
Date: Mon, 21 Aug 2017 16:25:05 -0400
Subject: print: Slow down perimeter print speeds

Loading two SFF-8201 HAs into Printrun, before:

    Estimated duration: 11 layers, 0:18:04

Loading two SFF-8201 HAs into Printrun, after:

    Estimated duration: 11 layers, 0:19:49
---
(limited to '.Slic3r/print/SFF-8201 HA.ini')

diff --git a/.Slic3r/print/SFF-8201 HA.ini b/.Slic3r/print/SFF-8201 HA.ini
index 948e29a..a439a2a 100644
--- a/.Slic3r/print/SFF-8201 HA.ini
+++ b/.Slic3r/print/SFF-8201 HA.ini
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.2.9 on Mon Aug 21 16:13:46 2017
+# generated by Slic3r 1.2.9 on Mon Aug 21 16:25:03 2017
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 2
 bridge_acceleration = 0
@@ -10,7 +10,7 @@ default_acceleration = 0
 dont_support_bridges = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0
-external_perimeter_speed = 80
+external_perimeter_speed = 60
 external_perimeters_first = 0
 extra_perimeters = 1
 extruder_clearance_height = 20
@@ -22,7 +22,7 @@ fill_pattern = rectilinear
 first_layer_acceleration = 0
 first_layer_extrusion_width = 0
 first_layer_height = 0.25
-first_layer_speed = 80
+first_layer_speed = 100%
 gap_fill_speed = 20
 gcode_comments = 1
 infill_acceleration = 0
@@ -46,7 +46,7 @@ overhangs = 1
 perimeter_acceleration = 0
 perimeter_extruder = 1
 perimeter_extrusion_width = 0
-perimeter_speed = 80
+perimeter_speed = 60
 perimeters = 2
 post_process = 
 raft_layers = 0
@@ -55,7 +55,7 @@ seam_position = aligned
 skirt_distance = 5
 skirt_height = 1
 skirts = 1
-small_perimeter_speed = 80
+small_perimeter_speed = 60
 solid_infill_below_area = 70
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
--
cgit v0.9.1