| Commit message (Expand) | Author | Age | Files | Lines |
* | Base; Increase speeds | Patrick McDermott | 2019-10-20 | 1 | -10/+10 |
|
|
* | Revert "eSUN HIPS, 3 mm: Cool bed to 90 after first layer" | Patrick McDermott | 2019-10-20 | 1 | -2/+2 |
|
|
* | Revert "eSUN HIPS, 3 mm: Lower first layer bed temp to 100" | Patrick McDermott | 2019-10-20 | 1 | -2/+2 |
|
|
* | eSUN HIPS, 3 mm: Lower first layer bed temp to 100 | Patrick McDermott | 2019-10-20 | 1 | -2/+2 |
|
|
* | eSUN HIPS, 3 mm: Cool bed to 90 after first layer | Patrick McDermott | 2019-10-20 | 1 | -2/+2 |
|
|
* | eSUN HIPS: Increase removal bed temp to 80 | Patrick McDermott | 2019-10-20 | 3 | -3/+3 |
|
|
* | eSUN HIPS, 3 mm: Cool bed to 100 after first layer | Patrick McDermott | 2019-10-20 | 1 | -2/+2 |
|
|
* | eSUN HIPS, 3 mm: Increase bed temps to 110 | Patrick McDermott | 2019-10-20 | 1 | -3/+3 |
|
|
* | Revert "Revert "eSUN HIPS, 3 mm: Unlimit fan speed (again)"" | Patrick McDermott | 2019-10-20 | 1 | -2/+2 |
|
|
* | Revert "eSUN HIPS, 3 mm: Unlimit fan speed (again)" | Patrick McDermott | 2019-10-19 | 1 | -2/+2 |
|
|
* | Revert "Base: Lay infill before perimeters" | Patrick McDermott | 2019-10-19 | 1 | -2/+2 |
|
|
* | Base: Lay infill before perimeters | Patrick McDermott | 2019-10-19 | 1 | -2/+2 |
|
|
* | eSUN HIPS, 3 mm: Unlimit fan speed (again) | Patrick McDermott | 2019-10-19 | 1 | -2/+2 |
|
|
* | Base: Reduce speeds to 20 | Patrick McDermott | 2019-10-19 | 1 | -10/+10 |
|
|
* | Base: Reduce speeds to 40 | Patrick McDermott | 2019-10-19 | 1 | -8/+8 |
|
|
* | Base: Reduce top, bottom, and bridge speeds to 60 | Patrick McDermott | 2019-10-19 | 1 | -5/+5 |
|
|
* | Base: Reduce top, bottom, and bridge speeds to 80 | Patrick McDermott | 2019-10-19 | 1 | -4/+4 |
|
|
* | Revert "eSUN HIPS, 3 mm: Raise temps" | Patrick McDermott | 2019-10-19 | 1 | -5/+5 |
|
|
* | eSUN HIPS, 3 mm: Raise temps | Patrick McDermott | 2019-10-19 | 1 | -5/+5 |
|
|
* | Revert "Base: Slow down first layer" | Patrick McDermott | 2019-10-19 | 1 | -2/+2 |
|
|
* | Base: Slow down first layer | Patrick McDermott | 2019-10-19 | 1 | -2/+2 |
|
|
* | Base: Set bridge speed to 100 | Patrick McDermott | 2019-10-19 | 1 | -2/+2 |
|
|
* | Base: Raise perimeter and solid fill speeds to 100 | Patrick McDermott | 2019-10-19 | 1 | -6/+6 |
|
|
* | Base: Decrease fill density to 10% | Patrick McDermott | 2019-10-19 | 1 | -2/+2 |
|
|
* | Base: Disable ineffective infill combination | Patrick McDermott | 2019-10-19 | 1 | -2/+2 |
|
|
* | Revert "Base: Reduce layer height to 0.2 mm" | Patrick McDermott | 2019-10-18 | 1 | -3/+3 |
|
|
* | Base: Reduce layer height to 0.2 mm | Patrick McDermott | 2019-10-18 | 1 | -3/+3 |
|
|
* | Base: Raise perimeter and top infill speeds to 80 | Patrick McDermott | 2019-10-18 | 1 | -5/+5 |
|
|
* | slic3r.ini: Switch to Base print settings | Patrick McDermott | 2019-10-18 | 1 | -1/+1 |
|
|
* | Revert "eSUN HIPS, 3 mm: Unlimit fan speed" | Patrick McDermott | 2019-10-18 | 1 | -2/+2 |
|
|
* | eSUN HIPS, 3 mm: Unlimit fan speed | Patrick McDermott | 2019-10-18 | 1 | -2/+2 |
|
|
* | eSUN HIPS, 3 mm: Lower extruder temps to 220 | Patrick McDermott | 2019-10-18 | 1 | -3/+3 |
|
|
* | eSUN HIPS: Increase removal bed temp to 70 | Patrick McDermott | 2019-10-18 | 3 | -3/+3 |
|
|
* | eSUN HIPS, 3 mm: Raise main bed temp to 100 | Patrick McDermott | 2019-10-18 | 1 | -2/+2 |
|
|
* | eSUN HIPS, 3 mm: Lower extruder temp to 230 | Patrick McDermott | 2019-10-18 | 1 | -3/+3 |
|
|
* | Revert "eSUN HIPS, 3 mm: Unlimit fan speed" | Patrick McDermott | 2019-10-18 | 1 | -2/+2 |
|
|
* | eSUN HIPS, 3 mm: Unlimit fan speed | Patrick McDermott | 2019-10-18 | 1 | -2/+2 |
|
|
* | eSUN HIPS, 3 mm: Raise extruder temp to 240 | Patrick McDermott | 2019-10-18 | 1 | -2/+2 |
|
|
* | Revert "eSUN HIPS, 3 mm: Raise bed temp to 100" | Patrick McDermott | 2019-10-18 | 1 | -2/+2 |
|
|
* | eSUN HIPS, 3 mm: Raise bed temp to 100 | Patrick McDermott | 2019-10-18 | 1 | -2/+2 |
|
|
* | eSUN HIPS, 3 mm: Increase first layer bed temp | Patrick McDermott | 2019-10-18 | 1 | -3/+3 |
|
|
* | eSUN HIPS, 3 mm: Don't cool first layer | Patrick McDermott | 2019-10-18 | 1 | -2/+2 |
|
|
* | eSUN HIPS, 3 mm: Raise first layer extruder temp | Patrick McDermott | 2019-10-18 | 1 | -2/+2 |
|
|
* | eSUN HIPS, 3 mm: Reduce extruder temps to 220 | Patrick McDermott | 2019-10-18 | 1 | -3/+3 |
|
|
* | filaments: Set min fan speed to 0 | Patrick McDermott | 2019-10-18 | 2 | -4/+4 |
|
|
* | eSUN HIPS, 3 mm: Cool first layer | Patrick McDermott | 2019-10-18 | 1 | -3/+3 |
|
|
* | eSUN HIPS, 3 mm: Lower temperatures | Patrick McDermott | 2019-10-18 | 1 | -5/+5 |
|
|
* | TAZ 6, SE v2.1, eSUN HIPS: Disable retraction lift | Patrick McDermott | 2019-10-17 | 1 | -2/+2 |
|
|
* | eSUN HIPS, 3 mm: Lower first layer temperature | Patrick McDermott | 2019-10-17 | 1 | -2/+2 |
|
|
* | slic3r.ini: Update profiles | Patrick McDermott | 2019-10-17 | 1 | -3/+3 |
|
|