diff options
| -rw-r--r-- | .Slic3r/printer/LulzBot Mini, HIPS - end.gcode | 30 | ||||
| -rw-r--r-- | .Slic3r/printer/LulzBot Mini, HIPS - start.gcode | 96 |
2 files changed, 126 insertions, 0 deletions
diff --git a/.Slic3r/printer/LulzBot Mini, HIPS - end.gcode b/.Slic3r/printer/LulzBot Mini, HIPS - end.gcode new file mode 100644 index 0000000..ece4b93 --- /dev/null +++ b/.Slic3r/printer/LulzBot Mini, HIPS - end.gcode @@ -0,0 +1,30 @@ + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; Begin LulzBot Mini HIPS end G-code ;; +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; + +; Ensure moves are complete +M400 ; Pause processing until moves complete + +; Begin cooling +M104 S0 ; Set hotend temperature without waiting +M140 S0 ; Set bed temperature without waiting +M107 ; Turn off the print cooling fan + +; Move to cooling position and retract filament +G92 E0 ; Set extruder position to 0 (origin) +G1 X5 Y5 Z156 E-5 F10000 ; Move bed and nozzle and retract filament +M190 R60 ; Wait for bed to cool + +; Move to print removal position +M140 S0 ; Set bed temperature without waiting +G1 X145 Y175 Z156 F10000 ; Move bed forward and toolhead right + +; Idle +M84 ; Turn off stepper motors +G90 ; Set absolute positioning mode + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; End LulzBot Mini HIPS end G-code ;; +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; + diff --git a/.Slic3r/printer/LulzBot Mini, HIPS - start.gcode b/.Slic3r/printer/LulzBot Mini, HIPS - start.gcode new file mode 100644 index 0000000..1e00c18 --- /dev/null +++ b/.Slic3r/printer/LulzBot Mini, HIPS - start.gcode @@ -0,0 +1,96 @@ + +; Input file name: [input_filename] +; Printer preset: [printer_preset] +; Filament preset: [filament_preset] +; Print preset: [print_preset] + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; Begin LulzBot Mini HIPS start G-code ;; +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; + +; Set units, positioning modes, and extruder origin +G21 ; Set units to millimeters +G90 ; Set absolute positioning mode +M82 ; Set E absolute mode (override G91) +G92 E0 ; Set extruder position to 0 (origin) + +; Begin heating hotend to HIPS retraction temperature +M107 ; Turn off the print cooling fan +M104 S150 ; Set hotend temperature without waiting +M140 S[first_layer_bed_temperature] ; Set bed temperature without waiting + +; While waiting for the hotend to heat, auto-home the axes +G28 ; Auto-home all axes +M109 ; Wait for hotend temperature + +; Retract filament before wiping +G1 Z150 E-30 F75 ; Slowly lower Z and retract filament + +; Begin heating hotend to HIPS wiping temperature +M104 S170 ; Set hotend temperature without waiting + +; While waiting for the hotend to heat, position the nozzle over the wiping pad +G1 X45 Y174 Z10 F11520 ; Move nozzle to just over wiping pad +M109 ; Wait for hotend temperature + +; Wipe the nozzle +G1 Z-0.5 F4000 ; Plunge nozzle into wiping pad +G1 X55 Y172 F4000 ; Wipe +G1 X45 Y174 Z0 F4000 ; Wipe +G1 X55 Y172 F4000 ; Wipe +G1 X45 Y174 F4000 ; Wipe +G1 X55 Y172 F4000 ; Wipe +G1 X45 Y174 F4000 ; Wipe +G1 X55 Y172 F4000 ; Wipe +G1 X60 Y174 F4000 ; Wipe +G1 X80 Y172 F4000 ; Wipe +G1 X60 Y174 F4000 ; Wipe +G1 X80 Y172 F4000 ; Wipe +G1 X60 Y174 F4000 ; Wipe +G1 X90 Y172 F4000 ; Wipe +G1 X80 Y174 F4000 ; Wipe +G1 X100 Y172 F4000 ; Wipe +G1 X80 Y174 F4000 ; Wipe +G1 X100 Y172 F4000 ; Wipe +G1 X80 Y174 F4000 ; Wipe +G1 X100 Y172 F4000 ; Wipe +G1 X110 Y174 F4000 ; Wipe +G1 X100 Y172 F4000 ; Wipe +G1 X110 Y174 F4000 ; Wipe +G1 X100 Y172 F4000 ; Wipe +G1 X110 Y174 F4000 ; Wipe +G1 X115 Y172 Z-0.5 F1000 ; Wipe slower, bury nozzle in cleanish area +G1 Z10 ; Lift out of wiping pad + +; Begin heating hotend to HIPS probing temperature +M104 S170 ; Set hotend temperature without waiting + +; While waiting for the hotend to heat, auto-home X and Y +G28 X0 Y0 ; Auto-home X and Y +M109 ; Wait for hotend temperature + +; Probe the bed and enable bed leveling compensation +M204 S300 ; Set acceleration for probing moves +G29 ; Probe the bed +M204 S2000 ; Set acceleration back to normal +G1 Z10 F5000 ; Lift off the bed-leveling washer + +; Begin heating hotend to first layer temperature +M104 S[first_layer_temperature] ; Set hotend temperature without waiting + +; While waiting for the hotend to heat, position the nozzle and pause +G1 X5 Y15 F5000 ; Move near front left corner +G4 S1 ; Dwell/pause command queue for 1 second +M400 ; Pause processing until moves complete + +; Ensure the hotend and bed are at the first layer temperatures +M109 ; Wait for hotend temperature +M190 ; Wait for bed temperature + +; Extrude filament back into the nozzle +G1 Z2 E0 F75 ; Slowly raise nozzle and extrude filamant + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; End LulzBot Mini HIPS start G-code ;; +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; + |