diff options
Diffstat (limited to '.Slic3r')
| -rw-r--r-- | .Slic3r/print/Simple Mode.ini | 18 | ||||
| -rw-r--r-- | .Slic3r/printer/Simple Mode.ini | 10 | ||||
| -rw-r--r-- | .Slic3r/simple.ini | 131 | ||||
| -rw-r--r-- | .Slic3r/slic3r.ini | 9 |
4 files changed, 167 insertions, 1 deletions
diff --git a/.Slic3r/print/Simple Mode.ini b/.Slic3r/print/Simple Mode.ini new file mode 100644 index 0000000..ae543b5 --- /dev/null +++ b/.Slic3r/print/Simple Mode.ini @@ -0,0 +1,18 @@ +# generated by Slic3r 1.2.9 on Sun Apr 10 11:32:43 2016 +bottom_solid_layers = 3 +brim_width = 0 +dont_support_bridges = 1 +external_fill_pattern = rectilinear +fill_density = 20% +fill_pattern = honeycomb +infill_speed = 80 +layer_height = 0.4 +perimeter_speed = 60 +perimeters = 3 +raft_layers = 0 +support_material = 0 +support_material_contact_distance = 0.2 +support_material_spacing = 2.5 +top_solid_layers = 3 +travel_speed = 130 +xy_size_compensation = 0 diff --git a/.Slic3r/printer/Simple Mode.ini b/.Slic3r/printer/Simple Mode.ini new file mode 100644 index 0000000..78186f4 --- /dev/null +++ b/.Slic3r/printer/Simple Mode.ini @@ -0,0 +1,10 @@ +# generated by Slic3r 1.2.9 on Sun Apr 10 11:39:10 2016 +bed_shape = -2x-2,156x-2,156x156,-2x156 +end_gcode = M104 S0 ; turn off temperature\nG28 X0 ; home X axis\nM84 ; disable motors\n +gcode_flavor = reprap +nozzle_diameter = 0.5 +retract_length = 1 +retract_lift = 0.2 +start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n +wipe = 0 +z_offset = 1.43 diff --git a/.Slic3r/simple.ini b/.Slic3r/simple.ini new file mode 100644 index 0000000..70bd939 --- /dev/null +++ b/.Slic3r/simple.ini @@ -0,0 +1,131 @@ +# generated by Slic3r 1.2.9 on Sun Apr 10 11:39:10 2016 +avoid_crossing_perimeters = 1 +bed_shape = -2x-2,156x-2,156x156,-2x156 +bed_temperature = 0 +before_layer_gcode = +bottom_solid_layers = 3 +bridge_acceleration = 0 +bridge_fan_speed = 100 +bridge_flow_ratio = 1 +bridge_speed = 60 +brim_width = 0 +complete_objects = 0 +cooling = 1 +default_acceleration = 0 +disable_fan_first_layers = 3 +dont_support_bridges = 1 +duplicate_distance = 6 +end_gcode = M104 S0 ; turn off temperature\nG28 X0 ; home X axis\nM84 ; disable motors\n +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0 +external_perimeter_speed = 50% +external_perimeters_first = 0 +extra_perimeters = 1 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extruder_offset = 0x0 +extrusion_axis = E +extrusion_multiplier = 1 +extrusion_width = 0 +fan_always_on = 0 +fan_below_layer_time = 60 +filament_colour = #FFFFFF +filament_diameter = 3 +fill_angle = 45 +fill_density = 20% +fill_pattern = honeycomb +first_layer_acceleration = 0 +first_layer_bed_temperature = 0 +first_layer_extrusion_width = 200% +first_layer_height = 0.5 +first_layer_speed = 30 +first_layer_temperature = 205 +gap_fill_speed = 20 +gcode_arcs = 0 +gcode_comments = 0 +gcode_flavor = reprap +infill_acceleration = 0 +infill_every_layers = 10 +infill_extruder = 1 +infill_extrusion_width = 0 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 15% +infill_speed = 80 +interface_shells = 0 +layer_gcode = +layer_height = 0.4 +max_fan_speed = 100 +max_print_speed = 80 +max_volumetric_speed = 0 +min_fan_speed = 35 +min_print_speed = 10 +min_skirt_length = 0 +notes = +nozzle_diameter = 0.5 +octoprint_apikey = +octoprint_host = +only_retract_when_crossing_perimeters = 1 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 1 +perimeter_acceleration = 0 +perimeter_extruder = 1 +perimeter_extrusion_width = 0 +perimeter_speed = 60 +perimeters = 3 +post_process = +pressure_advance = 0 +raft_layers = 0 +resolution = 0 +retract_before_travel = 2 +retract_layer_change = 0 +retract_length = 1 +retract_length_toolchange = 10 +retract_lift = 0.2 +retract_restart_extra = 0 +retract_restart_extra_toolchange = 0 +retract_speed = 40 +seam_position = aligned +skirt_distance = 6 +skirt_height = 1 +skirts = 1 +slowdown_below_layer_time = 5 +small_perimeter_speed = 15 +solid_infill_below_area = 70 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0 +solid_infill_speed = 20 +spiral_vase = 0 +standby_temperature_delta = -5 +start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n +support_material = 0 +support_material_angle = 0 +support_material_contact_distance = 0.2 +support_material_enforce_layers = 0 +support_material_extruder = 1 +support_material_extrusion_width = 0 +support_material_interface_extruder = 1 +support_material_interface_layers = 3 +support_material_interface_spacing = 0 +support_material_interface_speed = 100% +support_material_pattern = pillars +support_material_spacing = 2.5 +support_material_speed = 60 +support_material_threshold = 0 +temperature = 200 +thin_walls = 1 +threads = 2 +toolchange_gcode = +top_infill_extrusion_width = 0 +top_solid_infill_speed = 15 +top_solid_layers = 3 +travel_speed = 130 +use_firmware_retraction = 0 +use_relative_e_distances = 0 +use_volumetric_e = 0 +vibration_limit = 0 +wipe = 0 +xy_size_compensation = 0 +z_offset = 1.43 diff --git a/.Slic3r/slic3r.ini b/.Slic3r/slic3r.ini index dc40075..93bbddb 100644 --- a/.Slic3r/slic3r.ini +++ b/.Slic3r/slic3r.ini @@ -1,6 +1,13 @@ -# generated by Slic3r 1.2.9 on Sun Apr 10 11:12:03 2016 +# generated by Slic3r 1.2.9 on Sun Apr 10 12:05:44 2016 autocenter = 1 background_processing = 1 mode = simple version = 1.2.9 version_check = 1 + +[presets] +print = Simple Mode.ini +printer = Simple Mode.ini + +[recent] +config_directory = /home/cam |