summaryrefslogtreecommitdiffstats
path: root/.Slic3r/print
diff options
context:
space:
mode:
Diffstat (limited to '.Slic3r/print')
-rw-r--r--.Slic3r/print/SFF-8201 HA.ini (renamed from .Slic3r/print/SFF-8201 HA, 4-mm skirt, 40 mm per s.ini)20
1 files changed, 10 insertions, 10 deletions
diff --git a/.Slic3r/print/SFF-8201 HA, 4-mm skirt, 40 mm per s.ini b/.Slic3r/print/SFF-8201 HA.ini
index c211c2b..ef1cbb5 100644
--- a/.Slic3r/print/SFF-8201 HA, 4-mm skirt, 40 mm per s.ini
+++ b/.Slic3r/print/SFF-8201 HA.ini
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.2.9 on Wed Aug 16 19:12:33 2017
+# generated by Slic3r 1.2.9 on Mon Aug 21 11:55:12 2017
avoid_crossing_perimeters = 0
bottom_solid_layers = 2
bridge_acceleration = 0
@@ -10,19 +10,19 @@ default_acceleration = 0
dont_support_bridges = 1
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0
-external_perimeter_speed = 40
+external_perimeter_speed = 80
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0.5
fill_angle = 45
-fill_density = 0%
+fill_density = 10%
fill_pattern = rectilinear
first_layer_acceleration = 0
first_layer_extrusion_width = 0
first_layer_height = 0.25
-first_layer_speed = 30
+first_layer_speed = 80
gap_fill_speed = 20
gcode_comments = 0
infill_acceleration = 0
@@ -32,7 +32,7 @@ infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 15%
-infill_speed = 40
+infill_speed = 80
interface_shells = 0
layer_height = 0.25
max_print_speed = 80
@@ -46,21 +46,21 @@ overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
-perimeter_speed = 40
+perimeter_speed = 80
perimeters = 2
post_process =
raft_layers = 0
resolution = 0
seam_position = aligned
-skirt_distance = 4
+skirt_distance = 5
skirt_height = 1
skirts = 1
-small_perimeter_speed = 40
+small_perimeter_speed = 80
solid_infill_below_area = 70
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0
-solid_infill_speed = 40
+solid_infill_speed = 80
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
@@ -80,7 +80,7 @@ support_material_threshold = 0
thin_walls = 1
threads = 2
top_infill_extrusion_width = 0
-top_solid_infill_speed = 40
+top_solid_infill_speed = 80
top_solid_layers = 2
travel_speed = 130
xy_size_compensation = 0