diff options
Diffstat (limited to '.Slic3r/print/SFF-8201 HA.ini')
| -rw-r--r-- | .Slic3r/print/SFF-8201 HA.ini | 86 |
1 files changed, 86 insertions, 0 deletions
diff --git a/.Slic3r/print/SFF-8201 HA.ini b/.Slic3r/print/SFF-8201 HA.ini new file mode 100644 index 0000000..b5813e0 --- /dev/null +++ b/.Slic3r/print/SFF-8201 HA.ini @@ -0,0 +1,86 @@ +# generated by Slic3r 1.2.9 on Wed Aug 16 17:16:23 2017 +avoid_crossing_perimeters = 0 +bottom_solid_layers = 2 +bridge_acceleration = 0 +bridge_flow_ratio = 1 +bridge_speed = 60 +brim_width = 0 +complete_objects = 0 +default_acceleration = 0 +dont_support_bridges = 1 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0 +external_perimeter_speed = 50% +external_perimeters_first = 0 +extra_perimeters = 1 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0.5 +fill_angle = 45 +fill_density = 0% +fill_pattern = rectilinear +first_layer_acceleration = 0 +first_layer_extrusion_width = 0 +first_layer_height = 0.25 +first_layer_speed = 30 +gap_fill_speed = 20 +gcode_comments = 0 +infill_acceleration = 0 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 15% +infill_speed = 80 +interface_shells = 0 +layer_height = 0.25 +max_print_speed = 80 +max_volumetric_speed = 0 +min_skirt_length = 5 +notes = +only_retract_when_crossing_perimeters = 1 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 1 +perimeter_acceleration = 0 +perimeter_extruder = 1 +perimeter_extrusion_width = 0 +perimeter_speed = 20 +perimeters = 2 +post_process = +raft_layers = 0 +resolution = 0 +seam_position = aligned +skirt_distance = 10 +skirt_height = 1 +skirts = 1 +small_perimeter_speed = 20 +solid_infill_below_area = 70 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0 +solid_infill_speed = 20 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_contact_distance = 0.2 +support_material_enforce_layers = 0 +support_material_extruder = 1 +support_material_extrusion_width = 0 +support_material_interface_extruder = 1 +support_material_interface_layers = 3 +support_material_interface_spacing = 0 +support_material_interface_speed = 100% +support_material_pattern = pillars +support_material_spacing = 2.5 +support_material_speed = 60 +support_material_threshold = 0 +thin_walls = 1 +threads = 2 +top_infill_extrusion_width = 0 +top_solid_infill_speed = 20 +top_solid_layers = 2 +travel_speed = 130 +xy_size_compensation = 0 |