diff options
| author | P. J. McDermott <pj@pehjota.net> | 2017-08-15 15:26:07 (EDT) |
|---|---|---|
| committer | P. J. McDermott <pj@pehjota.net> | 2017-08-20 21:53:12 (EDT) |
| commit | c5ac3002f44f0560e2afad479b01f47483a8996c (patch) | |
| tree | 5a11fcf0e4af84d249a489ac0f07b034f1794cb7 | |
| parent | 91cbe44186eba2fb31a03ecc9274201573023fe5 (diff) | |
| download | slic3r-c5ac3002f44f0560e2afad479b01f47483a8996c.zip slic3r-c5ac3002f44f0560e2afad479b01f47483a8996c.tar.gz slic3r-c5ac3002f44f0560e2afad479b01f47483a8996c.tar.bz2 | |
printer: Increase retraction speed and Z offset
| -rw-r--r-- | .Slic3r/printer/LulzBot Mini.ini | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/.Slic3r/printer/LulzBot Mini.ini b/.Slic3r/printer/LulzBot Mini.ini index 5e689b6..0b390fb 100644 --- a/.Slic3r/printer/LulzBot Mini.ini +++ b/.Slic3r/printer/LulzBot Mini.ini @@ -1,4 +1,4 @@ -# generated by Slic3r 1.2.9 on Sun Apr 10 21:40:34 2016 +# generated by Slic3r 1.2.9 on Tue Aug 15 15:26:07 2017 bed_shape = -2x-2,156x-2,156x156,-2x156 before_layer_gcode = end_gcode = ; Begin LulzBot Mini end sequence\nM400 ; wait for current moves to finish (clear buffer)\nM104 S0 ; Hotend off\nM140 S0 ; heated bed heater off (if you have it)\nM107 ; fans off\nG92 E5 ; set extruder to 5mm for retract on print end\nG1 X5 Y5 Z156 E0 F10000 ; move to cooling positioning\nM190 R50 ; wait for bed to cool\nM140 S0 ; turn off bed temp\nG1 X145 Y175 Z156 F1000 ; move to cooling positioning\nM84 ; steppers off\nG90 ; absolute positioning\n; End LulzBot Mini end sequence\n @@ -16,7 +16,7 @@ retract_length_toolchange = 10 retract_lift = 0.2 retract_restart_extra = 0 retract_restart_extra_toolchange = 0 -retract_speed = 10 +retract_speed = 40 start_gcode = ; Begin LulzBot Mini start sequence\n; File name: [input_filename]\n; Print time: [timestamp]\n; Printer preset: [printer_preset]\n; Filament preset: [filament_preset]\n; Print preset: [print_preset]\n; First layer height: [first_layer_height]\n; Layer height: [layer_height]\n; Fill: [fill_density] [fill_pattern] at [fill_angle] degrees\n; Filament Diameter: [filament_diameter]\n; Nozzle Diameter: [nozzle_diameter]\nG21 ; metric values\nG90 ; absolute positioning\nM82 ; set extruder to absolute mode\nM107 ; start with the fan off\nG92 E0 ; set extruder position to 0\nM140 S[first_layer_bed_temperature] ; get bed heating up\nG28 ; home all\nM109 S140 ; set to cleaning temp and wait\nG1 Z150 E-30 F75 ; suck up XXmm of filament\nM109 S140 ; heat up rest of way\nG1 X45 Y174 F11520 ; move behind scraper\nG1 Z0 F1200 ; CRITICAL: set Z to height of top of scraper\nG1 X45 Y174 Z-.5 F4000 ; wiping ; plunge into wipe pad\nG1 X55 Y172 Z-.5 F4000 ; wiping\nG1 X45 Y174 Z0 F4000 ; wiping\nG1 X55 Y172 F4000 ; wiping\nG1 X45 Y174 F4000 ; wiping\nG1 X55 Y172 F4000 ; wiping\nG1 X45 Y174 F4000 ; wiping\nG1 X55 Y172 F4000 ; wiping\nG1 X60 Y174 F4000 ; wiping\nG1 X80 Y172 F4000 ; wiping\nG1 X60 Y174 F4000 ; wiping\nG1 X80 Y172 F4000 ; wiping\nG1 X60 Y174 F4000 ; wiping\nG1 X90 Y172 F4000 ; wiping\nG1 X80 Y174 F4000 ; wiping\nG1 X100 Y172 F4000 ; wiping\nG1 X80 Y174 F4000 ; wiping\nG1 X100 Y172 F4000 ; wiping\nG1 X80 Y174 F4000 ; wiping\nG1 X100 Y172 F4000 ; wiping\nG1 X110 Y174 F4000 ; wiping\nG1 X100 Y172 F4000 ; wiping\nG1 X110 Y174 F4000 ; wiping\nG1 X100 Y172 F4000 ; wiping\nG1 X110 Y174 F4000 ; wiping\nG1 X115 Y172 Z-0.5 F1000 ; wipe slower and bury noz in cleanish area\nG1 Z10 ; raise z\nG28 X0 Y0 ; home x and y\nM109 S140 ; set to probing temp\nM204 S300 ; set accel for probing\nG29 ; Probe\nM204 S2000 ; set accel back to normal\nG1 X5 Y15 Z10 F5000 ; get out the way\nG4 S1 ; pause\nM400 ; clear buffer\nM109 S[first_layer_temperature] ; set extruder temp and wait\nG4 S15 ; wait for bed to temp up\nG1 Z2 E0 F75 ; extrude filament back into nozzle\nM140 S[first_layer_bed_temperature] ; get bed temping up during first layer\n; End LulzBot Mini start sequence\n toolchange_gcode = use_firmware_retraction = 0 @@ -24,4 +24,4 @@ use_relative_e_distances = 0 use_volumetric_e = 0 vibration_limit = 0 wipe = 0 -z_offset = 0 +z_offset = 0.1 |