printer: Use HIPS retraction, wiping, and probing temps

1 files changed, 2 insertions, 2 deletions

diff --git a/.Slic3r/printer/LulzBot Mini.ini b/.Slic3r/printer/LulzBot Mini.ini
index fe98a01..1a0534d 100644
--- a/.Slic3r/printer/LulzBot Mini.ini
+++ b/.Slic3r/printer/LulzBot Mini.ini
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.2.9 on Wed Aug 16 19:09:49 2017
+# generated by Slic3r 1.2.9 on Sun Aug 20 18:36:44 2017
 bed_shape = -2x-2,152x-2,152x152,-2x152
 before_layer_gcode = 
 end_gcode = ; Begin LulzBot Mini end sequence\nM400                                 ; wait for current moves to finish (clear buffer)\nM104 S0                              ; Hotend off\nM140 S0                              ; heated bed heater off (if you have it)\nM107                                 ; fans off\nG92 E5                               ; set extruder to 5mm for retract on print end\nG1 X5 Y5 Z156 E0 F10000              ; move to cooling positioning\nM190 R50                             ; wait for bed to cool\nM140 S0                              ; turn off bed temp\nG1 X145 Y175 Z156 F1000              ; move to cooling positioning\nM84                                  ; steppers off\nG90                                  ; absolute positioning\n; End LulzBot Mini end sequence\n
@@ -17,7 +17,7 @@ retract_lift = 0.2
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
 retract_speed = 40
-start_gcode = ; Begin LulzBot Mini start sequence\n; File name: [input_filename]\n; Print time: [timestamp]\n; Printer preset: [printer_preset]\n; Filament preset: [filament_preset]\n; Print preset: [print_preset]\n; First layer height: [first_layer_height]\n; Layer height: [layer_height]\n; Fill: [fill_density] [fill_pattern] at [fill_angle] degrees\n; Filament Diameter: [filament_diameter]\n; Nozzle Diameter: [nozzle_diameter]\nG21                                  ; metric values\nG90                                  ; absolute positioning\nM82                                  ; set extruder to absolute mode\nM107                                 ; start with the fan off\nG92 E0                               ; set extruder position to 0\nM140 S[first_layer_bed_temperature]  ; get bed heating up\nG28                                  ; home all\nM109 S140                            ; set to cleaning temp and wait\nG1 Z150 E-30 F75                     ; suck up XXmm of filament\nM109 S140                            ; heat up rest of way\nG1 X45 Y174 F11520                   ; move behind scraper\nG1 Z0  F1200                         ; CRITICAL: set Z to height of top of scraper\nG1 X45 Y174 Z-.5 F4000               ; wiping ; plunge into wipe pad\nG1 X55 Y172 Z-.5 F4000               ; wiping\nG1 X45 Y174 Z0 F4000                 ; wiping\nG1 X55 Y172 F4000                    ; wiping\nG1 X45 Y174 F4000                    ; wiping\nG1 X55 Y172 F4000                    ; wiping\nG1 X45 Y174 F4000                    ; wiping\nG1 X55 Y172 F4000                    ; wiping\nG1 X60 Y174 F4000                    ; wiping\nG1 X80 Y172 F4000                    ; wiping\nG1 X60 Y174 F4000                    ; wiping\nG1 X80 Y172 F4000                    ; wiping\nG1 X60 Y174 F4000                    ; wiping\nG1 X90 Y172 F4000                    ; wiping\nG1 X80 Y174 F4000                    ; wiping\nG1 X100 Y172 F4000                   ; wiping\nG1 X80 Y174 F4000                    ; wiping\nG1 X100 Y172 F4000                   ; wiping\nG1 X80 Y174 F4000                    ; wiping\nG1 X100 Y172 F4000                   ; wiping\nG1 X110 Y174 F4000                   ; wiping\nG1 X100 Y172 F4000                   ; wiping\nG1 X110 Y174 F4000                   ; wiping\nG1 X100 Y172 F4000                   ; wiping\nG1 X110 Y174 F4000                   ; wiping\nG1 X115 Y172 Z-0.5 F1000             ; wipe slower and bury noz in cleanish area\nG1 Z10                               ; raise z\nG28 X0 Y0                            ; home x and y\nM109 S140                            ; set to probing temp\nM204 S300                            ; set accel for probing\nG29                                  ; Probe\nM204 S2000                           ; set accel back to normal\nG1 X5 Y15 Z10 F5000                  ; get out the way\nG4 S1                                ; pause\nM400                                 ; clear buffer\nM109 S[first_layer_temperature]      ; set extruder temp and wait\nG4 S15                               ; wait for bed to temp up\nG1 Z2 E0 F75                         ; extrude filament back into nozzle\nM140 S[first_layer_bed_temperature]  ; get bed temping up during first layer\n; End LulzBot Mini start sequence\n
+start_gcode = ; Begin LulzBot Mini start sequence\n; File name: [input_filename]\n; Print time: [timestamp]\n; Printer preset: [printer_preset]\n; Filament preset: [filament_preset]\n; Print preset: [print_preset]\n; First layer height: [first_layer_height]\n; Layer height: [layer_height]\n; Fill: [fill_density] [fill_pattern] at [fill_angle] degrees\n; Filament Diameter: [filament_diameter]\n; Nozzle Diameter: [nozzle_diameter]\nG21                                  ; metric values\nG90                                  ; absolute positioning\nM82                                  ; set extruder to absolute mode\nM107                                 ; start with the fan off\nG92 E0                               ; set extruder position to 0\nM140 S[first_layer_bed_temperature]  ; get bed heating up\nG28                                  ; home all\nM109 S150                            ; set to cleaning temp and wait\nG1 Z150 E-30 F75                     ; suck up XXmm of filament\nM109 S170                            ; heat up rest of way\nG1 X45 Y174 F11520                   ; move behind scraper\nG1 Z0  F1200                         ; CRITICAL: set Z to height of top of scraper\nG1 X45 Y174 Z-.5 F4000               ; wiping ; plunge into wipe pad\nG1 X55 Y172 Z-.5 F4000               ; wiping\nG1 X45 Y174 Z0 F4000                 ; wiping\nG1 X55 Y172 F4000                    ; wiping\nG1 X45 Y174 F4000                    ; wiping\nG1 X55 Y172 F4000                    ; wiping\nG1 X45 Y174 F4000                    ; wiping\nG1 X55 Y172 F4000                    ; wiping\nG1 X60 Y174 F4000                    ; wiping\nG1 X80 Y172 F4000                    ; wiping\nG1 X60 Y174 F4000                    ; wiping\nG1 X80 Y172 F4000                    ; wiping\nG1 X60 Y174 F4000                    ; wiping\nG1 X90 Y172 F4000                    ; wiping\nG1 X80 Y174 F4000                    ; wiping\nG1 X100 Y172 F4000                   ; wiping\nG1 X80 Y174 F4000                    ; wiping\nG1 X100 Y172 F4000                   ; wiping\nG1 X80 Y174 F4000                    ; wiping\nG1 X100 Y172 F4000                   ; wiping\nG1 X110 Y174 F4000                   ; wiping\nG1 X100 Y172 F4000                   ; wiping\nG1 X110 Y174 F4000                   ; wiping\nG1 X100 Y172 F4000                   ; wiping\nG1 X110 Y174 F4000                   ; wiping\nG1 X115 Y172 Z-0.5 F1000             ; wipe slower and bury noz in cleanish area\nG1 Z10                               ; raise z\nG28 X0 Y0                            ; home x and y\nM109 S170                            ; set to probing temp\nM204 S300                            ; set accel for probing\nG29                                  ; Probe\nM204 S2000                           ; set accel back to normal\nG1 X5 Y15 Z10 F5000                  ; get out the way\nG4 S1                                ; pause\nM400                                 ; clear buffer\nM109 S[first_layer_temperature]      ; set extruder temp and wait\nG4 S15                               ; wait for bed to temp up\nG1 Z2 E0 F75                         ; extrude filament back into nozzle\nM140 S[first_layer_bed_temperature]  ; get bed temping up during first layer\n; End LulzBot Mini start sequence\n
 toolchange_gcode = 
 use_firmware_retraction = 0
 use_relative_e_distances = 0