diff options
| author | P. J. McDermott <pj@pehjota.net> | 2017-08-16 18:36:43 (EDT) |
|---|---|---|
| committer | P. J. McDermott <pj@pehjota.net> | 2017-08-21 11:20:58 (EDT) |
| commit | d477b4e8d2864d2c610fb7e9b4dae8788fb34f32 (patch) | |
| tree | ed0a1ab7cba9393b8a3faa0dc29e2b7178dff69e /.Slic3r/print | |
| parent | e42ceae52f96415fe489ab575b0122108248b8e9 (diff) | |
| download | slic3r-d477b4e8d2864d2c610fb7e9b4dae8788fb34f32.zip slic3r-d477b4e8d2864d2c610fb7e9b4dae8788fb34f32.tar.gz slic3r-d477b4e8d2864d2c610fb7e9b4dae8788fb34f32.tar.bz2 | |
print: Increase all print speeds to 40 mm/s
Diffstat (limited to '.Slic3r/print')
| -rw-r--r-- | .Slic3r/print/SFF-8201 HA, 40 mm per s.ini (renamed from .Slic3r/print/SFF-8201 HA.ini) | 14 |
1 files changed, 7 insertions, 7 deletions
diff --git a/.Slic3r/print/SFF-8201 HA.ini b/.Slic3r/print/SFF-8201 HA, 40 mm per s.ini index b5813e0..19151dc 100644 --- a/.Slic3r/print/SFF-8201 HA.ini +++ b/.Slic3r/print/SFF-8201 HA, 40 mm per s.ini @@ -1,4 +1,4 @@ -# generated by Slic3r 1.2.9 on Wed Aug 16 17:16:23 2017 +# generated by Slic3r 1.2.9 on Wed Aug 16 18:36:43 2017 avoid_crossing_perimeters = 0 bottom_solid_layers = 2 bridge_acceleration = 0 @@ -10,7 +10,7 @@ default_acceleration = 0 dont_support_bridges = 1 external_fill_pattern = rectilinear external_perimeter_extrusion_width = 0 -external_perimeter_speed = 50% +external_perimeter_speed = 40 external_perimeters_first = 0 extra_perimeters = 1 extruder_clearance_height = 20 @@ -32,7 +32,7 @@ infill_extrusion_width = 0 infill_first = 0 infill_only_where_needed = 0 infill_overlap = 15% -infill_speed = 80 +infill_speed = 40 interface_shells = 0 layer_height = 0.25 max_print_speed = 80 @@ -46,7 +46,7 @@ overhangs = 1 perimeter_acceleration = 0 perimeter_extruder = 1 perimeter_extrusion_width = 0 -perimeter_speed = 20 +perimeter_speed = 40 perimeters = 2 post_process = raft_layers = 0 @@ -55,12 +55,12 @@ seam_position = aligned skirt_distance = 10 skirt_height = 1 skirts = 1 -small_perimeter_speed = 20 +small_perimeter_speed = 40 solid_infill_below_area = 70 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0 -solid_infill_speed = 20 +solid_infill_speed = 40 spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 @@ -80,7 +80,7 @@ support_material_threshold = 0 thin_walls = 1 threads = 2 top_infill_extrusion_width = 0 -top_solid_infill_speed = 20 +top_solid_infill_speed = 40 top_solid_layers = 2 travel_speed = 130 xy_size_compensation = 0 |