diff options
| author | P. J. McDermott <pj@pehjota.net> | 2017-08-20 18:49:47 (EDT) |
|---|---|---|
| committer | P. J. McDermott <pj@pehjota.net> | 2017-08-20 22:13:54 (EDT) |
| commit | 693b425d9fc62525582866ad76e6d5dc8d6c78a8 (patch) | |
| tree | fda2a7176f819799bf61723aa7c2773f9bf5f959 /.Slic3r/filament | |
| parent | 601339dab65e9b66bc21641a8fb7fe28ac25f29b (diff) | |
| download | slic3r-693b425d9fc62525582866ad76e6d5dc8d6c78a8.zip slic3r-693b425d9fc62525582866ad76e6d5dc8d6c78a8.tar.gz slic3r-693b425d9fc62525582866ad76e6d5dc8d6c78a8.tar.bz2 | |
printer: Add custom start/end G-code files
G-code is easier to read in separate files than in Slic3r configuration.
This G-code is based on the LulzBot Mini G-code provided by Aleph
Objects. To increase speed, I added commands to set the hotend
temperature without waiting and arranged some commands like G28 and G1
to run while the hotend heats up. For better clarity, I also added more
comments and blank lines and vertically aligned wiping command
arguments.
Diffstat (limited to '.Slic3r/filament')
0 files changed, 0 insertions, 0 deletions