set last_window_maximized True
set last_window_width 800
set last_window_height 529
set port /dev/ttyACM0
set baudrate 115200
set build_dimensions 158.00x158.00x160.00-2.00-2.00+0.00+0.00+0.00+0.00
set extruders 1
set uimode Standard
set bgcolor #353638
set xy_feedrate 10000
set z_feedrate 500
set e_feedrate 100
set controlsmode Standard
set slic3rintegration False
set tempgauges True
set temperature_abs 240
set temperature_pla 205
set last_temperature 240.0
set last_bed_temperature 110.0
set last_sash_position 333
set last_extrusion 10
macro wipe-hips
  ; Set units, positioning modes, and extruder origin
  G21                                  ; Set units to millimeters
  G90                                  ; Set absolute positioning mode
  M82                                  ; Set E absolute mode (override G91)
  G92 E0                               ; Set extruder position to 0 (origin)
  ; Begin heating hotend to HIPS retraction temperature
  M107                                 ; Turn off the print cooling fan
  M104 S150                            ; Set hotend temperature without waiting
  M140 S110                            ; Set bed temperature without waiting
  ; While waiting for the hotend to heat, auto-home the axes
  G28                                  ; Auto-home all axes
  M109                                 ; Wait for hotend temperature
  ; Retract filament before wiping
  G1 Z150 E-30 F75                     ; Slowly lower Z and retract filament
  ; Begin heating hotend to HIPS wiping temperature
  M104 S170                            ; Set hotend temperature without waiting
  ; While waiting for the hotend to heat, position the nozzle over the wiping pad
  G1 X45 Y174 Z10 F11520               ; Move nozzle to just over wiping pad
  M109                                 ; Wait for hotend temperature
  ; Wipe the nozzle
  G1           Z-0.5 F4000             ; Plunge nozzle into wiping pad
  G1 X55  Y172       F4000             ; Wipe
  G1 X45  Y174 Z0    F4000             ; Wipe
  G1 X55  Y172       F4000             ; Wipe
  G1 X45  Y174       F4000             ; Wipe
  G1 X55  Y172       F4000             ; Wipe
  G1 X45  Y174       F4000             ; Wipe
  G1 X55  Y172       F4000             ; Wipe
  G1 X60  Y174       F4000             ; Wipe
  G1 X80  Y172       F4000             ; Wipe
  G1 X60  Y174       F4000             ; Wipe
  G1 X80  Y172       F4000             ; Wipe
  G1 X60  Y174       F4000             ; Wipe
  G1 X90  Y172       F4000             ; Wipe
  G1 X80  Y174       F4000             ; Wipe
  G1 X100 Y172       F4000             ; Wipe
  G1 X80  Y174       F4000             ; Wipe
  G1 X100 Y172       F4000             ; Wipe
  G1 X80  Y174       F4000             ; Wipe
  G1 X100 Y172       F4000             ; Wipe
  G1 X110 Y174       F4000             ; Wipe
  G1 X100 Y172       F4000             ; Wipe
  G1 X110 Y174       F4000             ; Wipe
  G1 X100 Y172       F4000             ; Wipe
  G1 X110 Y174       F4000             ; Wipe
  G1 X115 Y172 Z-0.5 F1000             ; Wipe slower, bury nozzle in cleanish area
  G1 Z10                               ; Lift out of wiping pad
  ; Begin heating hotend to HIPS probing temperature
  M109 S170                            ; Set and wait for hotend temperature