From b89beac0a1fba789f3fce4ab6e7f9cc841e6c166 Mon Sep 17 00:00:00 2001 From: P. J. McDermott Date: Mon, 21 Aug 2017 18:32:20 -0400 Subject: wipe_hips.gcode, probe.gcode: New files --- (limited to 'wipe_hips.gcode') diff --git a/wipe_hips.gcode b/wipe_hips.gcode new file mode 100755 index 0000000..e772f0b --- /dev/null +++ b/wipe_hips.gcode @@ -0,0 +1,62 @@ +; Run with `printcore -v /dev/ttyACM0 wipe_hips.gcode` + +; Set units, positioning modes, and extruder origin +G21 ; Set units to millimeters +G90 ; Set absolute positioning mode +M82 ; Set E absolute mode (override G91) +G92 E0 ; Set extruder position to 0 (origin) + +; Begin heating hotend to HIPS retraction temperature +M107 ; Turn off the print cooling fan +M104 S150 ; Set hotend temperature without waiting +M140 S110 ; Set bed temperature without waiting + +; While waiting for the hotend to heat, auto-home the axes +G28 ; Auto-home all axes +M109 ; Wait for hotend temperature + +; Retract filament before wiping +G1 Z150 E-30 F75 ; Slowly lower Z and retract filament + +; Begin heating hotend to HIPS wiping temperature +M104 S170 ; Set hotend temperature without waiting + +; While waiting for the hotend to heat, position the nozzle over the wiping pad +G1 X45 Y174 Z10 F11520 ; Move nozzle to just over wiping pad +M109 ; Wait for hotend temperature + +; Wipe the nozzle +G1 Z-0.5 F4000 ; Plunge nozzle into wiping pad +G1 X55 Y172 F4000 ; Wipe +G1 X45 Y174 Z0 F4000 ; Wipe +G1 X55 Y172 F4000 ; Wipe +G1 X45 Y174 F4000 ; Wipe +G1 X55 Y172 F4000 ; Wipe +G1 X45 Y174 F4000 ; Wipe +G1 X55 Y172 F4000 ; Wipe +G1 X60 Y174 F4000 ; Wipe +G1 X80 Y172 F4000 ; Wipe +G1 X60 Y174 F4000 ; Wipe +G1 X80 Y172 F4000 ; Wipe +G1 X60 Y174 F4000 ; Wipe +G1 X90 Y172 F4000 ; Wipe +G1 X80 Y174 F4000 ; Wipe +G1 X100 Y172 F4000 ; Wipe +G1 X80 Y174 F4000 ; Wipe +G1 X100 Y172 F4000 ; Wipe +G1 X80 Y174 F4000 ; Wipe +G1 X100 Y172 F4000 ; Wipe +G1 X110 Y174 F4000 ; Wipe +G1 X100 Y172 F4000 ; Wipe +G1 X110 Y174 F4000 ; Wipe +G1 X100 Y172 F4000 ; Wipe +G1 X110 Y174 F4000 ; Wipe +G1 X115 Y172 Z-0.5 F1000 ; Wipe slower, bury nozzle in cleanish area +G1 Z10 ; Lift out of wiping pad + +; Begin heating hotend to HIPS probing temperature +M104 S170 ; Set hotend temperature without waiting + +; While waiting for the hotend to heat, auto-home X and Y +G28 X0 Y0 ; Auto-home X and Y +M109 ; Wait for hotend temperature -- cgit v0.9.1